RESUMEN
The long-fascinated idea of creating 3D images that depict depth information along with color and brightness has been realized with the advent of a light-field camera (LFC). Recently advanced LFCs mainly utilize micro-lens arrays (MLAs) as a key component to acquire rich 3D information, including depth, encoded color, reflectivity, refraction, occlusion, and transparency. The wide field-of-view (FOV) capability of LFCs, which is expected to be of great benefit for extended applications, is obstructed by the fundamental limitations of LFCs. Here, we present a practical strategy for the wide FOV-LFC by adjusting the spacing factor. Multiplicity (M) is the inverse magnification of the MLA located between the image plane and the sensor, which was introduced as the overlap ratio between the micro-images. M was adopted as a design parameter in several factors of the LFC, and a commercial lens with adjustable FOV was used as the main lens for practicality. The light-field (LF) information was evaluated by considering the pixel resolution and overlapping area in narrow and wide FOV. The M was optimized for narrow and wide FOV, respectively, by the trade-off relationship between pixel resolution and geometric resolution. Customized wide FOV-LFCs with different M were compared by spatial resolution test and depth information test, and the wide FOV-LFC with optimized M provides LF images with high accuracy.
Asunto(s)
Imagenología Tridimensional , Imagenología Tridimensional/métodosRESUMEN
Recently, intensive research on microlens array (MLA) was undertaken, which involved intertwining with the light-field imaging in order to obtain four-dimensional information. Although several fabrication approaches for MLA attempted to achieve high density and precision geometry, further progress is necessary. In this study, we present a cost-effective fabrication strategy for geometrically tunable polymer MLA with extremely low sag height (~3 µm) through improved MEMS wet etching process. Additionally, we assemble a hand-crafted light-field camera by integrating the elaborately customized MLA with a commercial digital camera. Finally, we demonstrate representative light-field imaging features including refocusing and all-in focusing image from a single exposure.
RESUMEN
Butterfly wings possess distinct micro/nanostructures that contribute to their vibrant coloration, light-trapping capabilities, and sensitivity to various stimuli. These complex features have inspired the creation of diverse devices and systems, such as sensors, photovoltaics, photocatalysis, and robotics. Specifically, the wing scales of the Emerald Swallowtail (Papilio palinurus) display iridescent, polarization-sensitive, and retroreflective colors due to their hierarchical structures. However, current technologies fail to mimic these natural designs fully, limiting their practical application in everyday life. In this study, we introduce a groundbreaking method for fabricating artificial wing scales that emulate the biological structure's functionality with a much simpler geometry. By integrating self-graded lossy media into metallic micro-concavity arrays, we achieve pronounced iridescent effects in both coaxial and non-coaxial arrangements, while preserving retroreflective properties. In particular, the simplified design allows for switchable color patterns based on the viewing angle. Demonstrating the concept, we successfully employ these conspicuous retroreflectors in hydrogen gas detection and the bi-directional/switchable recognition of patterned signals.
Asunto(s)
Técnicas Biosensibles , Mariposas Diurnas , Alas de Animales , Técnicas Biosensibles/instrumentación , Animales , Diseño de Equipo , Hidrógeno/química , Hidrógeno/análisis , Color , Nanoestructuras/químicaRESUMEN
Over the past few decades, advances in various nanophotonic structures to enhance light-matter interactions have opened numerous opportunities for biosensing applications. Beyond the successful development of label-free nanophotonic biosensors that utilize plasmon resonances in metals and Mie resonances in dielectrics, simpler structures are required to achieve improved sensor performance and multifunctionality, while enabling cost-effective fabrication. Here, we present a simple and effectual approach to colorimetric biosensing utilizing a trilayered Gires-Tournois (GT) resonator, which provides a sensitive slow-light effect in response to low refractive index (RI) substances and thus enables to distinguish low RI bioparticles from the background with spatially distinct color differences. For low RI sensitivity, by impedance matching based on the transmission line model, trilayer configuration enables the derivation of optimal designs to achieve the unity absorption condition in a low RI medium, which is difficult to obtain with the conventional GT configuration. Compared to conventional bilayered GT resonators, the trilayered GT resonator shows significant sensing performance with linear sensitivity in various situations with low RI substances. For extended applications, several proposed designs of trilayered GT resonators are presented in various material combinations by impedance matching using equivalent transmission line models. Further, comparing the color change of different substrates with low RI NPs using finite-difference time-domain (FDTD) simulations, the proposed GT structure shows surpassing colorimetric detection.
RESUMEN
Severe stress endangers outdoor workers who are in an exceedingly hot workplace. Although recent studies quantify stress levels on the human skin, they still rely on rigid, bulky sensor modules, causing data loss from motion artifacts and limited field-deployability for continuous health monitoring. Moreover, no prior work shows a wearable device that can endure heat exposure while showing continuous monitoring of a subject's stress under realistic working environments. Herein, a soft, field-deployable, wearable bioelectronic system is introduced for detecting outdoor workers' stress levels with negligible motion artifacts and controllable thermal management. A nanofabric radiative cooler (NFRC) and miniaturized sensors with a nanomembrane soft electronic platform are integrated to measure stable electrodermal activities and temperature in hot outdoor conditions. The NFRC exhibits outstanding cooling performance in sub-ambient air with high solar reflectivity and high thermal emissivity. The integrated wearable device with all embedded electronic components and the NFRC shows a lower temperature (41.1%) in sub-ambient air than the NFRC-less device while capturing improved operation time (18.2%). In vivo human study of the bioelectronics with agricultural activities demonstrates the device's capability for portable, continuous, real-time health monitoring of outdoor workers with field deployability.
Asunto(s)
Dispositivos Electrónicos Vestibles , Humanos , Piel , Electrónica , Temperatura , FríoRESUMEN
Fano resonance, known for its unique asymmetric line shape, has gained significant attention in photonics, particularly in sensing applications. However, it remains difficult to achieve controllable Fano parameters with a simple geometric structure. Here, a novel approach of using a thin-film optical Fano resonator with a porous layer to generate entire spectral shapes from quasi-Lorentzian to Lorentzian to Fano is proposed and experimentally demonstrated. The glancing angle deposition technique is utilized to create a polarization-dependent Fano resonator. By altering the linear polarization between s- and p-polarization, a switchable Fano device between quasi-Lorentz state and negative Fano state is demonstrated. This change in spectral shape is advantageous for detecting materials with a low-refractive index. A bio-particle sensing experiment is conducted that demonstrates an enhanced signal-to-noise ratio and prediction accuracy. Finally, the challenge of optimizing the film-based Fano resonator due to intricate interplay among numerous parameters, including layer thicknesses, porosity, and materials selection, is addressed. The inverse design tool is developed based on a multilayer perceptron model that allows fast computation for all ranges of Fano parameters. The method provides improved accuracy of the mean validation factor (MVF = 0.07, q-q') compared to the conventional exhaustive enumeration method (MVF = 0.37).
RESUMEN
Phase Change Materials (PCMs) have demonstrated tremendous potential as a platform for achieving diverse functionalities in active and reconfigurable micro-nanophotonic devices across the electromagnetic spectrum, ranging from terahertz to visible frequencies. This comprehensive roadmap reviews the material and device aspects of PCMs, and their diverse applications in active and reconfigurable micro-nanophotonic devices across the electromagnetic spectrum. It discusses various device configurations and optimization techniques, including deep learning-based metasurface design. The integration of PCMs with Photonic Integrated Circuits and advanced electric-driven PCMs are explored. PCMs hold great promise for multifunctional device development, including applications in non-volatile memory, optical data storage, photonics, energy harvesting, biomedical technology, neuromorphic computing, thermal management, and flexible electronics.
RESUMEN
[This corrects the article DOI: 10.1016/j.isci.2023.107946.].
RESUMEN
Biological imaging has opened novel paths for discoveries and advances in biology ranging from molecular to tissue scales [...].
RESUMEN
The next frontier of photonics is evolving into reconfigurable platforms with tunable functions to realize the ubiquitous application. The dynamic control of optical properties of photonics is highly desirable for a plethora of applications, including optical communication, dynamic display, self-adaptive photonics, and multi-spectral camouflage. Recently, to meet the dynamic response over broad optical bands, optically active materials have been integrated with the diverse photonic platforms, typically in the dimension of micro/nanometer scales. Here, we review recent advances in tunable photonics with controlling optical properties from visible to terahertz (THz) spectral range. We propose guidelines for designing tunable photonics in conjunction with optically active materials, inherent in wavelength characteristics. In particular, we devote our review to their potential uses for five different applications: structural coloration, metasurface for flat optics, photonic memory, thermal radiation, and terahertz plasmonics. Finally, we conclude with an outlook on the challenges and prospects of tunable photonics.
RESUMEN
Optical losses in photovoltaic (PV) systems cause nonradiative recombination or incomplete absorption of incident light, hindering the attainment of high energy conversion efficiency. The surface of the PV cells is encapsulated to not only protect the cell but also control the transmission properties of the incident light to promote maximum conversion. Despite many advances in elaborately designed photonic structures for light harvesting, the complicated process and sophisticated patterning highly diminish the cost-effectiveness and further limit the mass production on a large scale. Here, we propose a robust/comprehensive strategy based on the hybrid disordered photonic structure, implementing multifaceted light harvesting with an affordable/scalable fabrication method. The spatially segmented structures include (i) nanostructures in the active area for antireflection and (ii) microstructures in the inactive edge area for redirecting the incident light into the active area. A lithography-free hybrid disordered structure fabricated by the thermal dewetting method is a facile approach to create a large-area photonic structure with hyperuniformity over the entire area. Based on the experimentally realized nano-/microstructures, we designed a computational model and performed an analytical calculation to confirm the light behavior and performance enhancement. Particularly, the suggested structure is manufactured by the elastomeric stamps method, which is affordable and profitable for mass production. The produced hybrid structure integrated with the multijunction solar cell presented an improved efficiency from 28.0 to 29.6% by 1.06 times.
RESUMEN
Perovskite microcells have a great potential to be applied to diverse types of optoelectronic devices including light-emitting diodes, photodetectors, and solar cells. Although several perovskite fabrication methods have been researched, perovskite microcells without a significant efficiency drop during the patterning and fabrication process could not be developed yet. We herein report the fabrication of high-efficiency perovskite microcells using swelling-induced crack propagation and the application of the microcells to colored solar windows. The key procedure is a swelling-induced lift-off process that leads to patterned perovskite films with high-quality interfaces. Thus, a power conversion efficiency (PCE) of 20.1 % could be achieved with the perovskite microcell, which is nearly same as the PCE of our unpatterned perovskite photovoltaic device (PV). The semi-transparent PV based on microcells exhibited a light utilization efficiency of 4.67 and a color rendering index of 97.5 %. The metal-insulator-metal structure deposited on the semi-transparent PV enabled to fabricate solar windows with vivid colors and high color purity.
RESUMEN
Bright-field imaging of nanoscale bioparticles is a challenging task for optical microscopy because the light-matter interactions of bioparticles are weak on conventional surfaces due to their low refractive index and small size. Alternatively, advanced imaging techniques, including near-field microscopy and phase microscopy, have enabled visualization and quantification of the bioparticles, but they require assistance of sophisticated/customized systems and post-processing with complex established algorithms. Here, a simple and fast immunoassay device, Gires-Tournois immunoassay platform (GTIP) is presented, which provides unique color dynamics in response to optical environment changes and thus enables the label-free bright-field imaging and facile quantification of bioparticles using conventional optical microscopy. Bioparticles on GTIP slow down the velocity of reflected light, leading to vivid color change according to the local particle density and maximizing chromatic contrast for high spatial distinguishability. The particle distribution and density on the surface of the resonator are readily analyzed through 2D raster-scanning-based chromaticity analysis. GTIP offers multiscale sensing capability for target analytes that possess different refractive indices and sizes.
Asunto(s)
Microscopía , Refractometría , Algoritmos , Inmunoensayo , NanotecnologíaRESUMEN
High-performance photodetecting materials with intrinsic stretchability and colour sensitivity are key requirements for the development of shape-tunable phototransistor arrays. Another challenge is the proper compensation of optical aberrations and noises generated by mechanical deformation and fatigue accumulation in a shape-tunable phototransistor array. Here we report rational material design and device fabrication strategies for an intrinsically stretchable, multispectral and multiplexed 5 × 5 × 3 phototransistor array. Specifically, a unique spatial distribution of size-tuned quantum dots, blended in a semiconducting polymer within an elastomeric matrix, was formed owing to surface energy mismatch, leading to highly efficient charge transfer. Such intrinsically stretchable quantum-dot-based semiconducting nanocomposites enable the shape-tunable and colour-sensitive capabilities of the phototransistor array. We use a deep neural network algorithm for compensating optical aberrations and noises, which aids the precise detection of specific colour patterns (for example, red, green and blue patterns) both under its flat state and hemispherically curved state (radius of curvature of 18.4 mm).
Asunto(s)
Nanocompuestos , Puntos Cuánticos , Color , PolímerosRESUMEN
Chronic granulomatous disease (CGD) is an uncommon primary immune deficiency caused by phagocytes defective in oxygen metabolite production. It results in recurrent bacterial or fungal infections. Herein, we present a case of CGD with a large pulmonary granuloma in a neonate and review the imaging findings. The patient was a 24-day-old neonate admitted to the hospital with fever. A round opacified lesion was identified on the chest radiograph. Subsequent CT and MRI revealed a round mass with heterogeneous enhancement in the right lower lobe. There were foci of diffusion restriction in the mass. Surgical biopsy of the mass revealed chronic granuloma. Finally, the neonate was diagnosed with CGD caused by mutation of the gp91phox gene. Herein, we present the clinical and imaging findings of this unusual case of CGD.
RESUMEN
INTRODUCTION: Prognostic nutritional index (PNI) reflects the nutritional and immunologic status of the patients. The clinical application of PNI is already well-known in various kinds of solid tumors. However, there is no study investigating the relationship between PNI and oncological outcome of the resected ampulla of Vater (AoV) cancer. MATERIALS AND METHODS: From January 2005 to December 2012, the medical records of patients who underwent pancreaticoduodenectomy for pathologically confirmed AoV cancer were retrospectively reviewed. Long-term oncological outcomes were compared according to the preoperative PNI value. RESULT: A total of 118 patients were enrolled in this study. The preoperative PNI was 46.13±6.63, while the mean disease-free survival was 43.88 months and the mean disease-specific survival was 55.3 months. In the multivariate Cox analysis, initial CA19-9 (p = 0.0399), lymphovascular invasion (p = 0.0031), AJCC 8th N-stage (p = 0.0018), and preoperative PNI (p = 0.0081) were identified as significant prognostic factors for resected AoV cancer. The disease-specific survival was better in the high preoperative PNI group (≤48.85: 40.77 months vs. >48.85: 68.05 months, p = 0.0015). A highly accurate nomogram was developed based on four clinical components to predict the 1, 3, and 5-year disease-specific survival probability (C-index 0.8169, 0.8426, and 0.8233, respectively). CONCLUSION: In resected AoV cancer, preoperative PNI can play a significant role as an independent prognostic factor for predicting disease-specific survival.
Asunto(s)
Ampolla Hepatopancreática , Neoplasias del Conducto Colédoco/fisiopatología , Neoplasias del Conducto Colédoco/cirugía , Estado Nutricional , Anciano , Neoplasias del Conducto Colédoco/mortalidad , Supervivencia sin Enfermedad , Femenino , Humanos , Estimación de Kaplan-Meier , Masculino , Persona de Mediana Edad , Evaluación Nutricional , Pronóstico , Modelos de Riesgos Proporcionales , República de Corea/epidemiología , Estudios RetrospectivosRESUMEN
Acclimatable colors in response to environmental stimuli, which are naturally endowed with some living things, can provide an opportunity for humans to recognize hazardous substances without taking empirical risks. Despite efforts to create artificial responsive colors, realistic applications in everyday life require an immediate/distinct colorimetric realization with wide chromatic selectivity. A dynamically responsive virus (M-13 phage)-based changeable coloring strategy is presented with a highly lossy resonant promoter (HLRP). An ultrathin M-13 phage layer for rapid response to external stimuli displays colorimetric behavior, even in its subtle swelling with strong resonances on HLRP, which is modeled using the complex effective refractive index. Optimal designs of HLRP for several material combinations allow selective chromatic responsivity from the corresponding wide color palette without modification of the dynamic responsive layer. As a practical demonstration, the spatially designed colorimetric indicator, which is insensitive/sensitive to external stimuli, provides an intuitive perception of environmental changes with hidden/revealed patterns. Furthermore, the proposed colorimetric sensor is tested by exposure to various volatile organic chemicals and endocrine disrupting chemicals for versatile detectability, and is fabricated in a wafer-scale sample for large-area scalability.
RESUMEN
The engineering of structural colors is currently a promising, rapidly emerging research field because structural colors of outstanding spatial resolution and durability can be generated using a sustainable production method. However, the restricted and saturated color range in micro/nano-fabricated structural 'pigments' has hindered the dissemination of structural color printing. Here, this article presents a spectral mixing color filter (SMCF), which is the concept of fine-tunable color systems, capable of addressing the current issues in structural color engineering, by stacking a vertical silicon nanowire array embedded in a transparent polymer onto ultrathin optical coating layers. These two photonic structures enable independent tuning the optical resonance of each structure, depending on geometrical parameters, such as the diameter of nanowires and thickness of absorbing medium. Hence, the SMCF facilitates the linear combination of two resonant spectra, thereby enabling fine-tuning and widening of the color gamut. Theoretical studies and experimental results reveal the detailed working mechanisms and extraordinary mechanical feature of the SMCF. Based on the analyses, the concept of flexible optical device, e.g., a reflective anti-counterfeiting sticker, is demonstrated. Successful characterization demonstrates that the proposed strategy can promote the color controllability/purity of structural color and the applicability as flexible optical device.
RESUMEN
Artificial structural colors arising from nanosized materials have drawn much attention because of ultrahigh resolution, durability, and versatile utilizations compared to conventional pigments and dyes. However, the limited color range with current approaches has interrupted the supply for upcoming structural colorimetric applications. Here, we suggest a strategy for the widening of the color gamut by linear combination of two different resonance modes originating from silicon nanowire arrays (Si NWAs) and metal-insulator-metal nanoresonators. The enlarged color gamut representations are simply demonstrated by transferring Si NWAs embedded in a flexible polymer layer without additional treatment/fabrication. Optical simulation is used to verify the additive creation of a new resonance dip, without disturbing the original mode, and provides "predictable" color reproduction. Furthermore, we prove that the proposed structures are applicable to well-known semiconductor materials for various flexible optical devices and other colorant applications.
RESUMEN
In streamlined multipurpose applications for light management and protection, encapsulants are merged with photonic crystal structures into solar modules. We present an edge-located 1D grating, attachable polymer on the top of a photovoltaic module to provide a strategy for capturing solar light and improving cell efficiency. Large-area solar arrays suffer from space utilization problems due to nonactive area. The introduction of periodically patterned gratings with specific geometric range is highly preferred to redirect the light toward photovoltaic active areas. To realize optimized broadband light diffraction for solar devices, the theoretical analysis of one-dimensional line patterned diffraction gratings was performed through wave-optic-based simulation. Based on the experimental results, the replica molding-based patterning method was adopted to fabricate the grating polymer for low-cost thin-film production. Also, we demonstrated enhanced light collection by grating patterned encapsulants with improved current density in comparison to the performance of a flat surface.