Inactivation Efficacies and Mechanisms of Gas Plasma and Plasma-Activated Water against Aspergillus flavus Spores and Biofilms: a Comparative Study.

Atmospheric cold plasma (ACP) treatment is an emerging food technology for product safety and quality retention, shelf-life extension, and sustainable processing. The activated chemical species of ACP can act rapidly against microorganisms without leaving chemical residues on food surfaces. The main objectives of this study were to investigate the efficiency and mechanisms of inactivation of fungal spores and biofilms by ACP and to understand the effects of the gas-mediated and liquid-mediated modes of application against important fungal contaminants. Aspergillus flavus was selected as the model microorganism. A. flavus spores were exposed to either gas plasma (GP) or plasma-activated water (PAW), whereas gas plasma alone was used to treat A. flavus biofilms. This study demonstrated that both GP and PAW treatments independently resulted in significant decreases of A. flavus metabolic activity and spore counts, with maximal reductions of 2.2 and 0.6 log10 units for GP and PAW, respectively. The characterization of the reactive oxygen and nitrogen species in PAW and spore suspensions indicated that the concentration of secondary reactive species was an important factor influencing the antimicrobial activity of the treatment. The biofilm study showed that GP had detrimental effects on biofilm structure; however, the initial inoculum concentration prior to biofilm formation can be a crucial factor influencing the fungicidal effects of ACP.IMPORTANCE The production of mycotoxin-free food remains a challenge in both human and animal food chains. A. flavus, a mycotoxin-producing contaminant of economically important crops, was selected as the model microorganism to investigate the efficiency and mechanisms of ACP technology against fungal contaminants of food. Our study directly compares the antifungal properties of gas plasma (GP) and plasma-activated water (PAW) against fungi as well as reporting the effects of ACP treatment on biofilms produced by A. flavus.

Effects of cold plasma on wheat grain microbiome and antimicrobial efficacy against challenge pathogens and their resistance.

The safety and quality of cereal grain supplies are adversely impacted by microbiological contamination, with novel interventions required to maximise whole grains safety and stability. The microbiological contaminants of wheat grains and the efficacy of Atmospheric Cold Plasma (ACP) for potential to control these risks were investigated. The evaluations were performed using a contained reactor dielectric barrier discharge (DBD) system; samples were treated for 0-20 min using direct and indirect plasma exposure. Amplicon-based metagenomic analysis using bacterial 16S rRNA gene and fungal 18S rRNA gene with internal transcribed spacer (ITS) region was performed to characterize the change in microbial community composition in response to ACP treatment. The antimicrobial efficacy of ACP against a range of bacterial and fungal contaminants of wheat, was assessed to include individual isolates from grains as challenge pathogens. ACP influenced wheat microbiome composition, with a higher microbial diversity as well as abundance found on the untreated control grain samples. Culture and genomic approaches revealed different trends for mycoflora detection and control. A challenge study demonstrated that using direct mode of plasma exposure with 20 min of treatment significantly reduced the concentration of all pathogens. Overall, reduction levels for B. atrophaeus vegetative cells were higher than for all fungal species tested, whereas B. atrophaeus spores were the most resistant to ACP among all microorganisms tested. Of note, repeating sub-lethal plasma treatment did not induce resistance to ACP in either B. atrophaeus or A. flavus spores. ACP process control could be tailored to address diverse microbiological risks for grain stability and safety.

Assessing the Biological Safety of Atmospheric Cold Plasma Treated Wheat Using Cell and Insect Models.

Atmospheric cold plasma (ACP) is under investigation for an extensive range of biocontrol applications in food biosystems. However, the development of a novel intervention technology requires a thorough evaluation of the potential for negative effects and the implications for the human and animal food chains' safety. The evaluations were performed using a contained, high-voltage, dielectric barrier discharge plasma system. The cytotoxicity of two types of food models-a liquid model (wheat model medium (WMM)) vs. a solid model (wheat grain extract (WGE)) was compared in vitro using the mammalian cell line CHO-K1. The residual toxicity of ACP treatment of grains for food purposes was assessed using the invertebrate model Tribolium castaneum, by feeding the beetles with flour produced from ACP-treated wheat grains. The cytotoxic effects and changes in the chemistry of the ACP-treated samples were more pronounced in samples treated in a liquid form as opposed to actual wheat grains. The feeding trial using T. castaneum demonstrated no negative impacts on the survivability or weight profiles of insects. Investigations into the interactions of plasma-generated species with secondary metabolites in the food matrices are necessary to ensure the safety of plasma for food applications.

High voltage atmospheric cold air plasma control of bacterial biofilms on fresh produce.

Atmospheric cold plasma (ACP) offers great potential for decontamination of food borne pathogens. This study examined the antimicrobial efficacy of ACP against a range of pathogens of concern to fresh produce comparing planktonic cultures, monoculture biofilms (Escherichia coli, Salmonella enterica, Listeria monocytogenes, Pseudomonas fluorescens) and mixed culture biofilms (Listeria monocytogenes and Pseudomonas fluorescens). Biotic and abiotic surfaces commonly occurring in the fresh food industry were investigated. Microorganisms showed varying susceptibility to ACP treatment depending on target and process factors. Bacterial biofilm populations treated with high voltage (80 kV) ACP were reduced significantly (p < 0.05) in both mono- and mixed species biofilms after 60 s of treatment and yielded non-detectable levels after extending treatment time to 120 s. However, an extended time was required to reduce the challenge mixed culture biofilm of L. monocytogenes and P. fluorescens inoculated on lettuce, which was dependent on biofilm formation conditions and substrate. Contained treatment for 120 s reduced L. monocytogenes and P. fluorescens inoculated as mixed cultures on lettuce (p < 0.05) by 2.2 and 4.2 Log10 CFU/ml respectively. When biofilms were grown at 4 °C on lettuce, there was an increased resistance to ACP treatment by comparison with biofilm grown at temperature abuse conditions of 15 °C. Similarly, L. monocytogenes and P. fluorescens exposed to cold stress (4 °C) for 1 h demonstrated increased tolerance to ACP treatment compared to non-stressed cells. These finding demonstrates that bacterial form, mono versus mixed challenges as well as environmental stress conditions play an important role in ACP inactivation efficacy.

Degradation kinetics of cold plasma-treated antibiotics and their antimicrobial activity.

Antibiotics, such as ofloxacin (OFX) and ciprofloxacin (CFX), are often detected in considerable concentrations in both wastewater effluents and surface water. This poses a risk to non-target organisms and to human health. The aim of this work was to study atmospheric cold plasma (ACP) degradation of antibiotics in water and meat effluent and to explore any residual antimicrobial activity of samples submitted to the plasma process. The results revealed that ACP successfully degraded the studied antibiotics and that the reaction mechanism is principally related to attack by hydroxyl radicals and ozone. According to the disk diffusion assay, the activity of both antibiotics was considerably reduced by the plasma treatment. However, a microdilution method demonstrated that CFX exhibited higher antimicrobial activity after ACP treatment than the corresponding control revealing a potentially new platform for future research to improve the efficiency of conventional antibiotic treatments. Importantly, short-term exposures to sub-lethal concentrations of the antibiotic equally reduced bacterial susceptibility to both ACP treated and untreated CFX. As a remediation process, ACP removal of antibiotics in complex wastewater effluents is possible. However, it is recommended that plasma encompass degradant structure activity relationships to ensure that biological activity is eliminated against non-target organisms and that life cycle safety of antibiotic compounds is achieved.

Efficacy of Cold Plasma for Direct Deposition of Antibiotics as a Novel Approach for Localized Delivery and Retention of Effect.

Antimicrobial coating of medical devices has emerged as a potentially effective tool to prevent or ameliorate device-related infections. In this study the plasma deposition process for direct deposition of pharmaceutical drugs on to a range of surfaces and the retention of structure function relationship and antimicrobial efficacy against mono-species biofilms were investigated. Two selected sample antibiotics-ampicillin and gentamicin, were deposited onto two types of surfaces-polystyrene microtiter plates and stainless steel coupons. The antimicrobial efficacy of the antibiotic-coated surfaces was tested against challenge populations of both planktonic and sessile Escherichia coli and Pseudomonas aeruginosa, with responses monitored for up to 14 days. The plasma deposition process bonded the antibiotic to the surfaces, with localized retention of antibiotic activity. The antibiotics deposited on the test surfaces retained a good efficacy against planktonic cells, and importantly prevented biofilm formation of attached cells for up to 96 h. The antibiotic rapidly eluted from the surface of antibiotic-coated surfaces to the surrounding medium, with retention of effect in this surrounding milieu for up to 2 weeks. Control experiments established that there was no independent antimicrobial or growth promoting effect of the plasma deposition process, where there was no antibiotic in the helium plasma assisted delivery stream. Apart from the flexibility offered through deposition on material surfaces, there was no additive or destructive effect associated with the helium assisted plasma deposition process on the antibiotic. The plasma assisted process was a viable mean of coating clinically relevant materials and developing innovative functional materials with retention of antibiotic activity, without employing a linker or plasma modified polymer, thus minimizing bio-compatibility issues for medical device materials. This offers potential to prevent or control instrumented or non-permanent device associated infection localized to the surgical or implant site.

Current and Future Technologies for Microbiological Decontamination of Cereal Grains.

Cereal grains are the most important staple foods for mankind worldwide. The constantly increasing annual production and yield is matched by demand for cereals, which is expected to increase drastically along with the global population growth. A critical food safety and quality issue is to minimize the microbiological contamination of grains as it affects cereals both quantitatively and qualitatively. Microorganisms present in cereals can affect the safety, quality, and functional properties of grains. Some molds have the potential to produce harmful mycotoxins and pose a serious health risk for consumers. Therefore, it is essential to reduce cereal grain contamination to the minimum to ensure safety both for human and animal consumption. Current production of cereals relies heavily on pesticides input, however, numerous harmful effects on human health and on the environment highlight the need for more sustainable pest management and agricultural methods. This review evaluates microbiological risks, as well as currently used and potential technologies for microbiological decontamination of cereal grains.

The Potential of Cold Plasma for Safe and Sustainable Food Production.

Cold plasma science and technology is increasingly investigated for translation to a plethora of issues in the agriculture and food sectors. The diversity of the mechanisms of action of cold plasma, and the flexibility as a standalone technology or one that can integrate with other technologies, provide a rich resource for driving innovative solutions. The emerging understanding of the longer-term role of cold plasma reactive species and follow-on effects across a range of systems will suggest how cold plasma may be optimally applied to biological systems in the agricultural and food sectors. Here we present the current status, emerging issues, regulatory context, and opportunities of cold plasma with respect to the broad stages of primary and secondary food production.

Improving microbiological safety and quality characteristics of wheat and barley by high voltage atmospheric cold plasma closed processing.

Contamination of cereal grains as a key global food resource with insects or microorganisms is a persistent concern for the grain industry due to irreversible damage to quality and safety characteristics and economic losses. Atmospheric cold plasma presents an alternative to conventional grain decontamination methods owing to the high antimicrobial potential of reactive species generated during the treatment, but effects against product specific microflora are required to understand how to optimally develop this approach for grains. This work investigated the influence of ACP processing parameters for both cereal grain decontamination and grain quality as important criteria for grain or seed use. A high voltage (HV) (80 kV) dielectric barrier discharge (DBD) closed system was used to assess the potential for control of native microflora and pathogenic bacterial and fungal challenge microorganisms, in tandem with effects on grain functional properties. Response surface modelling of experimental data probed the key factors in relation to microbial control and seed germination promotion. The maximal reductions of barley background microbiota were 2.4 and 2.1 log10 CFU/g and of wheat - 1.5 and 2.5 log10 CFU/g for bacteria and fungi, respectively, which required direct treatment for 20 min followed by a 24 h sealed post-treatment retention time. In the case of challenge organisms inoculated on barley grains, the highest resistance was observed for Bacillus atrophaeus endospores, which, regardless of retention time, were maximally reduced by 2.4 log10 CFU/g after 20 min of direct treatment. The efficacy of the plasma treatment against selected microorganisms decreased in the following order: E. coli > P. verrucosum (spores) > B. atrophaeus (vegetative cells) > B. atrophaeus (endospores). The challenge microorganisms were more susceptible to ACP treatment than naturally present background microbiota. No major effect of short term plasma treatment on the retention of quality parameters was observed. Germination percentage measured after 7 days cultivation was similar for samples treated for up to 5 min, but this was decreased after 20 min of direct treatment. Overall, ACP proved effective for cereal grain decontamination, but it is noted that the diverse native micro-flora may pose greater resistance to the closed, surface decontamination approach than the individual fungal or bacterial challenges, which warrants investigation of grain microbiome responses to ACP.

Controlling Microbial Safety Challenges of Meat Using High Voltage Atmospheric Cold Plasma.

Atmospheric cold plasma (ACP) is a non-thermal technology, effective against a wide range of pathogenic microorganisms. Inactivation efficacy results from plasma generated reactive species. These may interact with any organic components in a test matrix including the target microorganism, thus food components may exert a protective effect against the antimicrobial mode of action. The effect of an in-package high voltage ACP process applied in conjunction with common meat processing MAP gas compositions as well as bacteria type and meat model media composition have been investigated to determine the applicability of this technology for decontamination of safety challenges associated with meat products. E. coli, L. monocytogenes, and S. aureus in PBS were undetectable after 60 s of treatment at 80 kVRMS in air, while ACP treatment of the contaminated meat model required post-treatment refrigeration to retain antimicrobial effect. The nutritive components in the meat model exerted a protective effect during treatment, where 300 s ACP exposure yielded a maximum reduction of 1.5 log using a high oxygen atmosphere, whilst using air and high nitrogen atmospheres yielded lower antimicrobial efficacy. Furthermore, an ROS assay was performed to understand the protective effects observed using the meat model. This revealed that nutritive components inhibited penetration of ROS into bacterial cells. This knowledge can assist the optimization of meat decontamination using ACP technology where interactions with all components of the food matrix require evaluation.

Cold Plasma Inactivation of Bacterial Biofilms and Reduction of Quorum Sensing Regulated Virulence Factors.

The main objectives of this work were to investigate the effect of atmospheric cold plasma (ACP) against a range of microbial biofilms commonly implicated in foodborne and healthcare associated human infections and against P. aeruginosa quorum sensing (QS)-regulated virulence factors, such as pyocyanin, elastase (Las B) and biofilm formation capacity post-ACP treatment. The effect of processing factors, namely treatment time and mode of plasma exposure on antimicrobial activity of ACP were also examined. Antibiofilm activity was assessed for E. coli, L. monocytogenes and S. aureus in terms of reduction of culturability and retention of metabolic activity using colony count and XTT assays, respectively. All samples were treated 'inpack' using sealed polypropylene containers with a high voltage dielectric barrier discharge ACP generated at 80 kV for 0, 60, 120 and 300 s and a post treatment storage time of 24 h. According to colony counts, ACP treatment for 60 s reduced populations of E. coli to undetectable levels, whereas 300 s was necessary to significantly reduce populations of L. monocytogenes and S. aureus biofilms. The results obtained from XTT assay indicated possible induction of viable but non culturable state of bacteria. With respect to P. aeruginosa QS-related virulence factors, the production of pyocyanin was significantly inhibited after short treatment times, but reduction of elastase was notable only after 300 s and no reduction in actual biofilm formation was achieved post-ACP treatment. Importantly, reduction of virulence factors was associated with reduction of the cytotoxic effects of the bacterial supernatant on CHO-K1 cells, regardless of mode and duration of treatment. The results of this study point to ACP technology as an effective strategy for inactivation of established biofilms and may play an important role in attenuation of virulence of pathogenic bacteria. Further investigation is warranted to propose direct evidence for the inhibition of QS and mechanisms by which this may occur.

Cold plasma inactivation of internalised bacteria and biofilms for Salmonella enterica serovar Typhimurium, Listeria monocytogenes and Escherichia coli.

Microbial biofilms and bacteria internalised in produce tissue may reduce the effectiveness of decontamination methods. In this study, the inactivation efficacy of in-package atmospheric cold plasma (ACP) afterglow was investigated against Salmonella Typhimurium, Listeria monocytogenes and Escherichia coli in the forms of planktonic cultures, biofilms formed on lettuce and associated bacteria internalised in lettuce tissue. Prepared lettuce broth (3%) was inoculated with bacteria resulting in a final concentration of ~7.0 log10 CFU/ml. For biofilm formation and internalisation, lettuce pieces (5 × 5 cm) were dip-inoculated in bacterial suspension of ~7.0 log10 CFU/ml for 2 h and further incubated for 0, 24 and 48 h at either 4 °C or room temperature (~22 °C) in combination with light/dark photoperiod or at 4 °C under dark conditions. Inoculated samples were sealed inside a rigid polypropylene container and indirectly exposed (i.e. placed outside plasma discharge) to a high voltage (80 kVRMS) air ACP with subsequent storage for 24 h at 4 °C. ACP treatment for 30s reduced planktonic populations of Salmonella, L. monocytogenes and E. coli suspended in lettuce broth to undetectable levels. Depending on storage conditions, bacterial type and age of biofilm, 300 s of treatment resulted in reduction of biofilm populations on lettuce by a maximum of 5 log10 CFU/sample. Scanning electron and confocal laser microscopy pointed to the incidence of bacterial internalisation and biofilm formation, which influenced the inactivation efficacy of ACP. Measured intracellular reactive oxygen species (ROS) revealed that the presence of organic matter in the bacterial suspension might present a protective effect against the action of ROS on bacterial cells. This study demonstrated that high voltage in-package ACP could be a potential technology to overcome bacterial challenges associated with food produce. However, the existence of biofilms and internalised bacteria should be considered for further optimisation of ACP treatment parameters in order to achieve an effective control of the realistic challenges posed by foodborne pathogens.