Highly Selective Recovery of Gold by In Situ Magnetic Field-Assisted Fe/Co-MOF@PDA/NdFeB Double Network Gel.

There are enormous economic benefits to conveniently increasing the selective recovery capacity of gold. Fe/Co-MOF@PDA/NdFeB double-network organogel (Fe/Co-MOF@PDA NH) is synthesized by aggregation assembly strategy. The package of PDA provides a large number of nitrogen-containing functional groups that can serve as adsorption sites for gold ions, resulting in a 21.8% increase in the ability of the material to recover gold. Fe/Co-MOF@PDA NH possesses high gold recovery capacity (1478.87 mg g-1) and excellent gold selectivity (Kd = 5.71 mL g-1). With the assistance of an in situ magnetic field, the gold recovery capacity of Fe/Co-MOF@PDA NH is increased from 1217.93 to 1478.87 mg g-1, and the recovery rate increased by 24.7%. The above excellent performance is attributed to the efficient reduction of gold by FDC/FC+, Co2+/Co3+ double reducing couple, and the optimization of the reduction reaction by the magnetic field. After the samples are calcined, high-purity gold (95.6%, 22K gold) is recovered by magnetic separation. This study proposes a forward-looking in situ energy field-assisted strategy to enhance precious metal recovery, which has a guiding role in the development of low-carbon industries.

Development of complete hydrometallurgical processes for gold recovery from ICs and CPUs using ionic liquids.

Integrated circuits (ICs) and central processing units (CPUs), essential components of electrical and electronic equipment (EEE), are complex composite materials rich in recyclable high-value strategic and critical metals, with many in concentrations higher than in their natural ores. With gold the most valuable metal present, increase in demand for gold for EEE and its limited availability have led to a steep rise in the market price of gold, making gold recycling a high priority to meet demand. To overcome the limitations associated with conventional technologies for recycling e-waste, the use of greener technologies (ionic liquids (ILs) as leaching agents), offers greater potential for the recovery of gold from e-waste components. While previous studies have demonstrated the efficiency and feasibility of using ILs for gold recovery, these works predominantly concentrate on the extraction stage and often utilise simulated solutions, lacking the implementation of a complete process validated with real samples to effectively assess its overall effectiveness. In this work, a simulated Model Test System was used to determine the optimal leaching and extraction conditions before application to real samples. With copper being the most abundant metal in the e-waste fractions, to access the gold necessitated a two-stage pre-treatment (nitric acid leaching followed by aqua regia leaching) to ensure complete removal of copper and deliver a gold-enriched leach liquor. Gold extraction from the leach liquor was achieved by liquid-liquid extraction using Cyphos 101 (0.1 M in toluene with an O:A = 1:1, 20 °C, 150 rpm, and 15 min) and as a second process by sorption extraction with loaded resins (Amberlite XAD-7 with 300 mg of Cyphos 101/g of resins at 20 °C, 150 rpm and 3 h). In both processes, complete stripping and desorption of gold was achieved (0.5 M thiourea in 0.5 M HCl) and gold recovered, as nanoparticles of purity ≥95%, via a reduction step using a sodium borohydride solution (0.1 M NaBH4 in 0.1 M NaOH). These two hydrometallurgical processes developed can achieve overall efficiencies of ≥95% for gold recovery from real e-waste components, permit the reuse of the IL and resins up to five consecutive times, and offer a promising approach for recovery from any e-waste stream rich in gold.

Highly Efficient and Selective Extraction of Gold from Thiosulfate Leaching Solution Using Functionalized Dicationic Ionic Liquids.

Thiosulfate leaching has been regarded as a promising alternative to cyanidation, but it still faces the challenge of the recovery of low content of gold from high concentrations of thiosulfate solutions. Liquid-liquid extraction is a method to address this issue but is still limited by the use of volatile and toxic organic solvents. To overcome this limitation, this work synthesized some functionalized dicationic ionic liquids (DILs) to serve as extraction solvents for the recovery of the gold-thiosulfate complex, [Au(S2O3)2]3-, from thiosulfate solutions. Experimental results indicated that the DILs showed higher extraction rates toward [Au(S2O3)2]3- compared with their monocationic-based counterparts, likely due to the stronger electrostatic interaction between the dications of the ILs and [Au(S2O3)2]3-. The transfer of [Au(S2O3)2]3- from the water phase to the IL phase was identified as an anion exchange and endothermic process. The rate of extraction was limited by the anion exchange process occurring at the IL-water interface. The extraction ability of ILs highly depended on the type of anion; specifically, the ILs with anions that had strong hydrogen-bonding ability exhibited high extraction ability toward [Au(S2O3)2]3-. Finally, DILs proved effective in the recovery of [Au(S2O3)2]3- from an actual gold leaching solution and exhibited high selectivity toward coexisting ions, indicating their potential as environmentally friendly solvents for gold recovery.

Anion-Regulated Ionic Covalent Organic Frameworks for Highly Selective Recovery of Gold from E-Waste.

The existing electronic waste (e-waste) and leaching solutions generated by industries accumulate significant amounts of gold (Au), even in excess of those in natural minerals. Therefore, the recycling of Au is extremely significant for the potential sustainability of chemical industry. By designing ionic covalent organic frameworks (COFs), here we synthesize a series of Ionic-COF-X (X=Cl-, Br-, AcO-, and SO42-) by anion regulation strategy. All these ionic COFs exhibit ultrahigh gold adsorption efficiency and excellent regeneration. Moreover, anion regulation could indeed affect the Au capture performance. In particular, when Cl- ions serve as counter ions, the Au capacity of Ionic-COF-Cl could reach 1270.8 mg g-1. Moreover, in the actual CPU leaching solution test, the selectivity of Ionic-COF-Cl towards Au3+ ion hits 39000 and 4600 times higher than that of Cu2+ and Ni2+ ions, respectively, suggesting that the Ionic-COF-Cl is a promising material for highly selective recovering gold from actual e-waste. DFT calculations further reveal that counter ions can regulate the adsorption affinity of ionic COF framework toward Au. In short, this work provides a useful anion regulation strategy to design ionic COFs as a promising platform for gold selective recovery from actual e-waste.

Extraction of Gold Based on Ionic Liquid Immobilized in UiO-66: An Efficient and Reusable Way to Avoid IL Loss Caused by Ion Exchange in Solvent Extraction.

Ionic liquids (ILs) have received considerable attention as a promising green solvent for extracting metal ions from aqueous solutions. However, the recycling of ILs remains difficult and challenging because of the leaching of ILs, which is caused by the ion exchange extraction mechanism and hydrolysis of ILs in acidic aqueous conditions. In this study, a series of imidazolium-based ILs were confined in a metal-organic framework (MOF) material (UiO-66) to overcome the limitations when used in solvent extraction. The effect of the various anions and cations of the ILs on the adsorption ability of AuCl4- was studied, and 1-hexyl-3-methylimidazole tetrafluoroborate ([HMIm]+[BF4]-@UiO-66) was used for the construction of a stable composite. The adsorption properties and mechanism of [HMIm]+[BF4]-@UiO-66 for Au(III) adsorption were also studied. The concentrations of tetrafluoroborate ([BF4]-) in the aqueous phase after Au(III) adsorption by [HMIm]+[BF4]-@UiO-66 and liquid-liquid extraction by [HMIm]+[BF4]- IL were 0.122 mg/L and 18040 mg/L, respectively. The results reveal that Au(III) coordinated with the N-containing functional groups, while [BF4]- was effectively confined in UiO-66, instead of undergoing anion exchange in liquid-liquid extraction. Electrostatic interactions and the reduction of Au(III) to Au(0) were also important factors determining the adsorption ability of Au(III). [HMIm]+[BF4]-@UiO-66 could be easily regenerated and reused for three cycles without any significant drop in the adsorption capacity.

Porous Covalent Organic Framework Based Hydrogen-Bond Nanotrap for the Precise Recognition and Separation of Gold.

Utilizing weak interactions to effectively recover and separate precious metals in solution is of great importance but the practice remains a challenge. Herein, we report a novel strategy to achieve precise recognition and separation of gold by regulating the hydrogen-bond (H-bond) nanotrap within the pore of covalent organic frameworks (COFs). It is found that both COF-HNU25 and COF-HNU26 can efficiently capture AuIII with fast kinetics, high selectivity, and uptake capacity. In particular, the COF-HNU25 with the high density of H-bond nanotraps exhibits an excellent gold uptake capacity of 1725 mg g-1 , which is significantly higher than that (219 mg g-1 ) of its isostructural COF (COF-42) without H-bond nanostrap in the pores. Importantly, the uptake capacity is strongly correlated to the number of H-bonds between phenolic OH in the COF and [AuCl4 ]- in water, and multiple H-bond interactions are the key driving force for the excellent gold recovery and reusability of the adsorbent.

Tailoring the Asymmetric Structure of NH2 -UiO-66 Metal-Organic Frameworks for Light-promoted Selective and Efficient Gold Extraction and Separation.

Designing adsorption materials with high adsorption capacities and selectivities is highly desirable for precious metal recovery. Desorption performance is also particularly crucial for subsequent precious metal recovery and adsorbent regeneration. Herein, a metal-organic framework (MOF) material (NH2 -UiO-66) with an asymmetric electronic structure of the central zirconium oxygen cluster has an exceptional gold extraction capacity of 2.04 g g-1 under light irradiation. The selectivity of NH2 -UiO-66 for gold ions is up to 98.8 % in the presence of interfering ions. Interestingly, the gold ions adsorbed on the surface of NH2 -UiO-66 spontaneously reduce in situ, undergo nucleation and growth and finally achieve the phase separation of high-purity gold particles from NH2 -UiO-66. The desorption and separation efficiency of gold particles from the adsorbent surface reaches 89 %. Theoretical calculations indicate that -NH2 functions as a dual donor of electrons and protons, and the asymmetric structure of NH2 -UiO-66 leads to energetically advantageous multinuclear gold capture and desorption. This adsorption material can greatly facilitate the recovery of gold from wastewater and can easily realize the recycling of the adsorbent.

Recovery of gold from e-waste via food waste byproducts.

Global materials' and energy constraints and environmental issues call for a holistic approach to waste upcycling. We propose a chemically rational, cost-effective and environmentally friendly recovery of non-leaching gold from e-waste using aqueous chemistry with hydrogen peroxide, an environmentally benign oxidant, and lactic acid, a food chain byproduct. The oxidation of the base metals enables the release of gold in its metallic state in the form of flakes subsequently separated via filtration. Our main byproduct is a precursor of Cu2O, a relevant metal oxide for solar energy conversion applications. The recovered gold was characterized by scanning electron microscopy, energy dispersive spectroscopy and x-ray photoelectron spectroscopy to gain insight into the morphology of the flakes and their chemical composition. Furthermore, recovered gold was used to successfully fabricate the source and drain electrodes in organic field-effect transistors.

Irreversible Amide-Linked Covalent Organic Framework for Selective and Ultrafast Gold Recovery.

Design of stable adsorbents for selective gold recovery with large capacity and fast adsorption kinetics is of great challenge, but significant for the economy and the environment. Herein, we show the design and preparation of an irreversible amide-linked covalent organic framework (COF) JNU-1 via a building block exchange strategy for efficient recovery of gold. JNU-1 was synthesized through the exchange of 4,4'-biphenyldicarboxaldehyde (BA) in mother COF TzBA consisting of 4,4',4''-(1,3,5-triazine-2,4,6-triyl)trianiline (Tz) and BA with terephthaloyl chloride. The irreversible amide linked JNU-1 gave good stability, unprecedented fast kinetics, excellent selectivity and outstanding adsorption capacity for gold recovery. X-ray photoelectron spectroscopy along with thermodynamic study and quantum mechanics calculation reveals that the excellent performance of JNU-1 for gold recovery results from the formation of hydrogen bonds C(N)-H⋅⋅⋅Cl and coordinate interaction of O and Au. The rational design of irreversible bonds as both inherent linkage and functional groups in COFs is a promising way to prepare stable COFs for diverse applications.

Environmentally Benign, Rapid, and Selective Extraction of Gold from Ores and Waste Electronic Materials.

The extraction of gold from ores and electronic waste is an important topic worldwide, as this precious metal has immense value in a variety of fields. However, serious environmental pollution and high energy consumption due to the use of toxic oxidation reagents and harsh reaction conditions is a well-known problem in the gold industry. Herein, we report a new chemical method based on the combined use of N-bromosuccinimide (NBS) and pyridine (Py), which has a greatly decreased environmental impact and reagent cost, as well as mild reaction requirements. This method can directly leach Au0 from gold ore and electronic waste to form AuIII in water. The process is achieved in a yield of approximately 90 % at room temperature and a nearly neutral pH. The minimum dose of NBS/Py is as low as 10 mm, which exhibits low toxicity towards mammalian cells and animals as well as aquatic creatures. The high leaching selectivity of Au over other metals during gold leaching is demonstrated, showing that this method has great potential for practical industrial application towards the sustainable refining of gold from ores and electronic waste.

Evaluation of gold adsorption on activated carbon from real cyanide and thiourea leachate solutions.

The recovery of gold by adsorption using activated carbon from sodium cyanide and thiourea leached solutions are reported in this study. The leached solutions were obtained under real operating conditions from the beneficiation plant "Paz Borja", Machala-Ecuador. Calgon Carbon DG-11 6X12 type, widely used in the local metallurgical industry was used as adsorbent material. The operational parameters varied during the adsorption process experiments included the concentration of leaching agent, agitation speed, dose of activated carbon and initial concentration of gold. The control parameters included density, percentage of solid, pH, temperature, and solution potential. The obtained results were adjusted to mass transfer model by diffusion through the interface and the Freundlich model for the equilibrium isotherms. The analysis of the results indicates a higher adsorption rate of the gold di-cyanide complex on activated carbon compared to gold-thiourea complexes.

Ionic liquids functionalized chitosan: An effective, rapid and green adsorbent for gold recovery.

Thiosulfate has been considered as a more environmentally-friendly alternative to cyanide salts for the extraction of gold from gold ores and the development of affordable, green and efficient adsorbents for the isolation of gold-thiosulfate complex (Au(S2O3)23-) from the leaching solution remains a significant challenge. To address this issue, chitosan, a natural macromolecule, was selected as a carrier and chemically modified with ionic liquids. The ionic liquids modified chitosan showed greater adsorption capacity towards Au(S2O3)23- compared with pristine chitosan. The adsorption of Au(S2O3)23- on ionic liquid modified chitosan followed Freundlich isotherm and pseudo-second order kinetic models, involving an anion-exchange mechanism with liquid film diffusion as the rate-limiting step. The chitosan modified with butylimidazolium-based ionic liquid had an adsorption capacity of 5.0 mg g-1 for gold (10 mg L-1 of gold, pH 6, 2 g L-1 of adsorbent dosage), outperforming other reported adsorbents. The ionic liquid modified chitosan showed a high adsorption efficiency of up to 96.7 % for Au(S2O3)23- in an actual thiosulfate leaching solution with a desorption efficiency of 98.4 %, suggesting that the ionic liquid modified chitosan has the potential to be a eco-friendly, biocompatible and effective adsorbent for the recovery of Au(S2O3)23-.

Porous Polypyrrolidines for Highly Efficient Recovery of Precious Metals through Reductive Adsorption Mechanism.

The recycling and utilization of precious metals have emerged as a critical research focus in advancing the development of the circular economy. Among numerous methods for recovering precious metals such as gold, adsorbents with both high adsorption selectivity and capacity have become key technologies. This article incorporated the N-phenylpyrrolidine into a flexible porous polynorbornene backbone to create a class of distinctive porous organic polymers, named BIT-POP-14-BIT-POP-17. Through a reductive capture mechanism, the reductive adsorption sites of N-phenylpyrrolidine coordinate selectively with precious metals, the reduced metal is captured by the hierarchically porous polymers with flexible backbone. This approach leads to remarkable gold recovery efficiency, achieving a record of 2321 mg g-1 at ambient conditions, and 3020 mg g-1 under UV light, surpassing the theoretical limit. The porous polymers are filled in a column for a continuous uptake of gold from waste printed circuit boards (PCBs), showing recovery efficiency toward gold as high as 95% after 84 h. Overall, this work offers a new perspective on designing novel adsorbents for precious metal recovery, providing inspiration for researchers to explore novel adsorption modes and contribute to the advancement of the circular economy.

Gold Recovery from E-Waste by Food-Waste Amyloid Aerogels.

Demand for gold recovery from e-waste grows steadily due to its pervasive use in the most diverse technical applications. Current methods of gold recovery are resource-intensive, necessitating the development of more efficient extraction materials. This study explores protein amyloid nanofibrils (AF) derived from whey, a dairy industry side-stream, as a novel adsorbent for gold recovery from e-waste. To do so, AF aerogels are prepared and assessed against gold adsorption capacity and selectivity over other metals present in waste electrical and electronic equipment (e-waste). The results demonstrate that AF aerogel has a remarkable gold adsorption capacity (166.7 mg g-1) and selectivity, making it efficient and an adsorbent for gold recovery. Moreover, AF aerogels are efficient templates to convert gold ions into single crystalline flakes due to Au growth along the (111) plane. When used as templates to recover gold from e-waste solutions obtained by dissolving computer motherboards in suitable solvents, the process yields high-purity gold nuggets, constituted by ≈90.8 wt% gold (21-22 carats), with trace amounts of other metals. Life cycle assessment and techno-economic analysis of the process finally consolidate the potential of protein nanofibril aerogels from food side-streams as an environmentally friendly and economically viable approach for gold recovery from e-waste.

Regulating the Interface Polarity Distribution of Zr-Based MOFs by Amino Acid-Like Ligand Functionalization Enables Efficient Recovery of Gold.

The recovery of gold from industrial effluents is crucial for environmental conservation, sustainable resource management, and promoting the green development of gold resources. We designed a Zr-based MOF (UKM-78) by incorporating functional organic ligands that resemble amino groups, using MOFs' inherent sieving effect for ion separation. This novel material exhibited enhanced gold recovery under acidic conditions, with an adsorption capacity three times and an adsorption rate four times higher than those of nonfunctionalized UKM-77. Notably, UKM-78 efficiently captured gold solutions at concentrations as low as 1 ppm and achieved an adsorption rate exceeding 90%, owing to the electrostatic interactions and coordination between its functionalized groups and the synergistic effect of its porous structure. Despite multiple regeneration cycles, UKM-78 retains 99.4% of its adsorption capacity. X-ray photoelectron spectroscopy (XPS), kinetic studies, and thermodynamics collectively demonstrated that Au(III) binding on UKM-78 involved cooperative electrostatic interactions and chemical adsorption through coordination. This study highlights the potential of MOFs for efficient and sustainable recovery of gold from complex waste streams.

Chitosan-thioglycolic acid composite cross-linked with glutaraldehyde for selective recovery of Au(III) ions from e-waste leachate via reduction-coupled adsorption and incineration.

The recovery of gold (Au) from electronic waste (e-waste) has gained significant attention due to its high Au content and economic feasibility compared to natural ores. This study presents a facile, single-step approach to prepare the chitosan-thioglycolic acid composite crosslinked with glutaraldehyde (CS-TGA-GA) and demonstrates its unique capability for precious metal management, which is a less investigated application area for thiolated chitosan materials. The novel cost-effective biosorbent CS-TGA-GA demonstrated a very high adsorption capacity of 1351.9 ± 96 mg/g and selectivity for Au(III) from an acidic e-waste solution at pH 1 and 298 K. The high adsorption capacity and selectivity of the sorbent can be attributed to the abundance of -NH2, -OH, and -SH groups present on its surface. Various characterizations, such as scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray diffractometry, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy, as well as sorption experiments, including pH, kinetic, and isotherm studies, were performed. The kinetic data align with a pseudo-second-order model and the isotherm data can be well expressed by the Freundlich model. The CS-TGA-GA composite effectively facilitated the conversion of Au(III) to Au(0), leading to the formation of Au nanoparticles that aggregated in the reaction vessel over time. Subsequently, the Au-loaded CS-TGA-GA underwent an incineration procedure, yielding recovered Au with a purity of 99.6%, as measured by X-ray fluorescence. In addition to its large uptake capacity, acid stability, and recyclability, the prepared sorbent showed a highly selective uptake of Au(III) ions in a solution containing various metal ions leached from waste printed circuit boards. These results highlight the potential of CS-TGA-GA as an adsorbent for the recovery of Au from e-waste leachate, thereby contributing to sustainable resource management.

Selective gold extraction from electronic waste using high-temperature-synthesized reagents.

For over two hundred years, cyanide has served as the primary reagent for gold extraction. However, due to its high toxicity, the use of cyanide poses significant risks. Traditional low-toxicity leaching reagents have limitations that restrict their widespread industrial application, leading to the necessity for the development of new, efficient, and low-toxic gold leaching reagents to support sustainable gold production. In this study, a novel, efficient, and low-toxicity gold extraction reagent was synthesized at high temperatures by combining urea, sodium carbonate, and a specific iron salt. The research delved into the leaching ability of the reagent under different synthesis conditions and examined the generation of free cyanide content as a by-product. Findings indicated that reagents synthesized with either potassium ferrocyanide or potassium ferricyanide displayed comparable leaching capabilities. Reagents synthesized at 800 °C exhibited lower levels of free cyanide ions and reduced toxicity. Additionally, this reagent demonstrated exceptional selectivity for gold, while in minimal dissolution of copper, iron, nickel, lead, and iron from computer central processing unit (CPU) pins. Under optimal conditions, the efficiency of gold extraction from CPU pins reached 94.65%. Hence, this reagent holds significant potential for the low-toxicity extraction of gold from electronic waste or auriferous concentrates.

Exploring the insights and benefits of biomass-derived sulfuric acid activated carbon for selective recovery of gold from simulated waste streams.

The surging affluent in society, concomitant with increasing global demand for electrical and electronic devices, has led to a sharp rise in e-waste generation. E-wastes contain significant amounts of precious metals, such as gold, which can be recovered and reused, thus reducing the environmental impact of mining new metals. Selective recovery using sustainable and cost-effective materials and methods is therefore vital. This study undertook a detailed evaluation of low-cost biomass-derived activated carbon (AC) for selective recovery of Au from simulated e-waste streams. Utilizing high-performance synthesized H2SO4-AC, the adsorption mechanisms were explicated through a combination of characterization techniques, i.e., FE-SEM, BET, TGA, XRD, FTIR, XPS, and DFT simulations to conceptualize the atomic and molecular level interactions. Optimization of coordination geometries between model H2SO4-AC and anionic complexes revealed the most stable coordination for AuCl4- (binding energy, Eb = -4064.15 eV). The Au selectivity was further enhanced by reduction of Au(III) to Au(0), as determined by XRD and XPS. The adsorption reaction was relatively fast (∼5h), and maximum Au uptake reached 1679.74 ± 37.66 mg/g (among highest), achieved through adsorption isotherm experiments. Furthermore, a mixture of 0.5 M thiourea/1 M HCl could effectively elute the loaded Au and regenerate the spent AC. This study presents radical attempts to examine in detail, the synergistic effects of H2SO4 activation on biomass-derived ACs for selective recovery of Au from complex mixtures. The paper therefore describes a novel approach for the selective recovery of Au from e-wastes using multifunctional biomass-derived H2SO4-AC.

Process and systematic study of gold recovery from flexible printed circuit boards (FPCBs) using a choline chloride-ethylene glycol system.

The traditional hydrometallurgy technology has been widely used to recover precious metals from electronic waste. However, such aqueous recycling systems often employ toxic/harsh chemicals, which may cause serious environmental problems. Herein, an efficient and environment-friendly method using a deep eutectic solvent (DES) mixed system of choline chloride-ethylene glycol-CuCl2·2H2O is developed for gold (Au) recovery from flexible printed circuit boards (FPCBs). The Au leaching and precipitation efficiency can reach approximately 100 % and 95.3 %, respectively, under optimized conditions. Kinetic results show that the Au leaching process follows a nucleation model, which is controlled by chemical surface reactions with an apparent activation energy of 80.29 kJ/mol. The present recycling system has a much higher selectivity for Au than for other base metals; the two-step recovery rate of Au can reach over 95 %, whereas those of copper and nickel are < 2 %. Hydrogen nuclear magnetic resonance spectroscopy (HNMR) and density functional theory (DFT) analyses confirm the formation of intermolecular hydrogen bonds in the DES mixed system, which increase the system melting and boiling points and facilitate the Au leaching process. The Au leaching system can be reused for several times, with the leaching efficiency remaining > 97 % after five cycles. Moreover, ethylene glycol (EG) and choline chloride (ChCl) act as aprotic solvents as well as coordinate with metals, decreasing the redox potential to shift the equilibrium to the leaching side. Overall, this research provides a theoretical and a practical basis for the recovery of metals from FPCBs.

Tuning electronic structure of the carbon skeleton to accelerate electron transfer for promoting the capture of gold.

The efficient and selective recovery of gold from secondary sources is key to sustainable development. However, the complexity of the recovery environment can significantly complicate the compositions of utilized sorbents. Here, we report a straw-derived mesoporous carbon as an inexpensive support material. This mesoporous carbon is modified by anions (sulfur modulation, C-S-180) to improve its electron-transfer efficiency and tune the electronic structure of its skeleton toward enhanced gold reduction. The high surface area of C-S-180 (989.4 m2/g), as well as the presence of abundant C-S in the porous structure of the adsorbent, resulted in an outstanding Au3+-uptake capacity (3422.75 mg/g), excellent resistance to interference, and favorable Au3+ selectivity. Dissimilar to most existing carbon-based adsorbents, electrochemistry-based studies on the electron-transfer efficiencies of adsorbents reveal that sulfur modulation is crucial to optimizing their adsorption performances. Furthermore, the density functional theory reveals that the optimization mechanism is attributable to the adjustment of the electronic structure of the carbon skeleton by C-S, which optimizes the band-gap energy for enhanced Au3+ reduction. These findings offer a strategy for constructing green and efficient adsorbents, as well as a basis for extending the applications of inexpensive carbon materials in gold recovery from complex environments.