Multimillijoule coherent terahertz bursts from picosecond laser-irradiated metal foils.

Ultrahigh-power terahertz (THz) radiation sources are essential for many applications, for example, THz-wave-based compact accelerators and THz control over matter. However, to date none of the THz sources reported, whether based upon large-scale accelerators or high-power lasers, have produced THz pulses with energies above the millijoule (mJ) level. Here, we report a substantial increase in THz pulse energy, as high as tens of mJ, generated by a high-intensity, picosecond laser pulse irradiating a metal foil. A further up-scaling of THz energy by a factor of ∼4 is observed when introducing preplasmas at the target-rear side. Experimental measurements and theoretical models identify the dominant THz generation mechanism to be coherent transition radiation, induced by the laser-accelerated energetic electron bunch escaping the target. Observation of THz-field-induced carrier multiplication in high-resistivity silicon is presented as a proof-of-concept application demonstration. Such an extremely high THz energy not only triggers various nonlinear dynamics in matter, but also opens up the research era of relativistic THz optics.

Ultrahigh-charge electron beams from laser-irradiated solid surface.

Compact acceleration of a tightly collimated relativistic electron beam with high charge from a laser-plasma interaction has many unique applications. However, currently the well-known schemes, including laser wakefield acceleration from gases and vacuum laser acceleration from solids, often produce electron beams either with low charge or with large divergence angles. In this work, we report the generation of highly collimated electron beams with a divergence angle of a few degrees, nonthermal spectra peaked at the megaelectronvolt level, and extremely high charge (∼100 nC) via a powerful subpicosecond laser pulse interacting with a solid target in grazing incidence. Particle-in-cell simulations illustrate a direct laser acceleration scenario, in which the self-filamentation is triggered in a large-scale near-critical-density plasma and electron bunches are accelerated periodically and collimated by the ultraintense electromagnetic field. The energy density of such electron beams in high-Z materials reaches to [Formula: see text], making it a promising tool to drive warm or even hot dense matter states.

Progress and opportunities for inertial fusion energy in Europe.

In this paper, I consider the motivations, recent results and perspectives for the inertial confinement fusion (ICF) studies in Europe. The European approach is based on the direct drive scheme with a preference for the central ignition boosted by a strong shock. Compared to other schemes, shock ignition offers a higher gain needed for the design of a future commercial reactor and relatively simple and technological targets, but implies a more complicated physics of laser-target interaction, energy transport and ignition. European scientists are studying physics issues of shock ignition schemes related to the target design, laser plasma interaction and implosion by the code developments and conducting experiments in collaboration with US and Japanese physicists, providing access to their installations Omega and Gekko XII. The ICF research in Europe can be further developed only if European scientists acquire their own academic laser research facility specifically dedicated to controlled fusion energy and going beyond ignition to the physical, technical, technological and operational problems related to the future fusion power plant. Recent results show significant progress in our understanding and simulation capabilities of the laser plasma interaction and implosion physics and in our understanding of material behaviour under strong mechanical, thermal and radiation loads. In addition, growing awareness of environmental issues has attracted more public attention to this problem and commissioning at ELI Beamlines the first high-energy laser facility with a high repetition rate opens the opportunity for qualitatively innovative experiments. These achievements are building elements for a new international project for inertial fusion energy in Europe. This article is part of a discussion meeting issue 'Prospects for high gain inertial fusion energy (part 1)'.

Ultrafast Laser Material Damage Simulation-A New Look at an Old Problem.

The chirped pulse amplification technique has enabled the generation of pulses of a few femtosecond duration with peak powers multi-Tera and Peta-Watt in the near infrared. Its implementation to realize even shorter pulse duration, higher energy, and higher repetition rate laser systems relies on overcoming the limitations imposed by laser damage of critical components. In particular, the laser damage of coatings in the amplifiers and in post-compression optics have become a bottleneck. The robustness of optical coatings is typically evaluated numerically through steady-state simulations of electric field enhancement in multilayer stacks. However, this approach cannot capture crucial characteristics of femtosecond laser induced damage (LID), as it only considers the geometry of the multilayer stack and the optical properties of the materials composing the stack. This approach neglects that in the interaction of an ultrashort pulse and the materials there is plasma generation and associated material modifications. Here, we present a numerical approach to estimate the LID threshold of dielectric multilayer coatings based on strong field electronic dynamics. In this dynamic scheme, the electric field propagation, photoionization, impact ionization, and electron heating are incorporated through a finite-difference time-domain algorithm. We applied our method to simulate the LID threshold of bulk fused silica, and of multilayer dielectric mirrors and gratings. The results are then compared with experimental measurements. The salient aspects of our model, such as the implementation of the Keldysh photoionization model, the impact ionization model, the electron collision model for 'low'-temperature, dense plasma, and the LID threshold criterion for few-cycle pulses are discussed.

Stable femtosecond X-rays with tunable polarization from a laser-driven accelerator.

Technology based on high-peak-power lasers has the potential to provide compact and intense radiation sources for a wide range of innovative applications. In particular, electrons that are accelerated in the wakefield of an intense laser pulse oscillate around the propagation axis and emit X-rays. This betatron source, which essentially reproduces the principle of a synchrotron at the millimeter scale, provides bright radiation with femtosecond duration and high spatial coherence. However, despite its unique features, the usability of the betatron source has been constrained by its poor control and stability. In this article, we demonstrate the reliable production of X-ray beams with tunable polarization. Using ionization-induced injection in a gas mixture, the orbits of the relativistic electrons emitting the radiation are reproducible and controlled. We observe that both the signal and beam profile fluctuations are significantly reduced and that the beam pointing varies by less than a tenth of the beam divergence. The polarization ratio reaches 80%, and the polarization axis can easily be rotated. We anticipate a broad impact of the source, as its unprecedented performance opens the way for new applications.

Energetic electrons driven in the polarization direction of an intense laser beam incident normal to a solid target.

Experiments were performed at the LLNL Titan laser to measure the propagation direction of the energetic electrons that were generated during the interaction of the polarized laser beam with solid targets in the case of normal incidence. The energetic electrons propagated through vacuum to spectator metal wires in the polarization direction and in the perpendicular direction, and the K shell spectra from the different wire materials were recorded as functions of the distance from the laser focal spot. It was found that the fluence of the energetic electrons driven into the spectator wires in the polarization direction compared to the perpendicular direction was larger and increased with the distance from the focal spot. This indicates that energetic electrons are preferentially driven in the direction of the intense oscillating electric field of the incident laser beam in agreement with the multiphoton inverse Bremsstrahlung absorption process.

The generation of amplified spontaneous emission in high-power CPA laser systems.

An analytical model is presented describing the temporal intensity contrast determined by amplified spontaneous emission in high-intensity laser systems which are based on the principle of chirped pulse amplification. The model describes both the generation and the amplification of the amplified spontaneous emission for each type of laser amplifier. This model is applied to different solid state laser materials which can support the amplification of pulse durations ≤350 fs . The results are compared to intensity and fluence thresholds, e.g. determined by damage thresholds of a certain target material to be used in high-intensity applications. This allows determining if additional means for contrast improvement, e.g. plasma mirrors, are required for a certain type of laser system and application. Using this model, the requirements for an optimized high-contrast front-end design are derived regarding the necessary contrast improvement and the amplified "clean" output energy for a desired focussed peak intensity. Finally, the model is compared to measurements at three different high-intensity laser systems based on Ti:Sapphire and Yb:glass. These measurements show an excellent agreement with the model.

Laser ion acceleration toward future ion beam cancer therapy - Numerical simulation study -.

BACKGROUND: Ion beam has been used in cancer treatment, and has a unique preferable feature to deposit its main energy inside a human body so that cancer cell could be killed by the ion beam. However, conventional ion accelerator tends to be huge in its size and its cost. In this paper a future intense-laser ion accelerator is proposed to make the ion accelerator compact. SUBJECTS AND METHODS: An intense femtosecond pulsed laser was employed to accelerate ions. The issues in the laser ion accelerator include the energy efficiency from the laser to the ions, the ion beam collimation, the ion energy spectrum control, the ion beam bunching and the ion particle energy control. In the study particle computer simulations were performed to solve the issues, and each component was designed to control the ion beam quality. RESULTS: When an intense laser illuminates a target, electrons in the target are accelerated and leave from the target; temporarily a strong electric field is formed between the high-energy electrons and the target ions, and the target ions are accelerated. The energy efficiency from the laser to ions was improved by using a solid target with a fine sub-wavelength structure or by a near-critical density gas plasma. The ion beam collimation was realized by holes behind the solid target. The control of the ion energy spectrum and the ion particle energy, and the ion beam bunching were successfully realized by a multi-stage laser-target interaction. CONCLUSIONS: The present study proposed a novel concept for a future compact laser ion accelerator, based on each component study required to control the ion beam quality and parameters.