Barley Nodulin 26-like intrinsic protein permeates water, metalloids, saccharides, and ion pairs due to structural plasticity and diversification.

Aquaporins can facilitate the passive movement of water, small polar molecules, and some ions. Here, we examined solute selectivity for the barley Nodulin 26-like Intrinsic Protein (HvNIP2;1) embedded in liposomes and examined through stopped-flow light scattering spectrophotometry and Xenopus laevis oocyte swelling assays. We found that HvNIP2;1 permeates water, boric and germanic acids, sucrose, and lactose but not d-glucose or d-fructose. Other saccharides, such as neutral (d-mannose, d-galactose, d-xylose, d-mannoheptaose) and charged (N-acetyl d-glucosamine, d-glucosamine, d-glucuronic acid) aldoses, disaccharides (cellobiose, gentiobiose, trehalose), trisaccharide raffinose, and urea, glycerol, and acyclic polyols, were permeated to a much lower extent. We observed apparent permeation of hydrated KCl and MgSO4 ions, while CH3COONa and NaNO3 permeated at significantly lower rates. Our experiments with boric acid and sucrose revealed no apparent interaction between solutes when permeated together, and AgNO3 or H[AuCl4] blocked the permeation of all solutes. Docking of sucrose in HvNIP2;1 and spinach water-selective SoPIP2;1 aquaporins revealed the structural basis for sucrose permeation in HvNIP2;1 but not in SoPIP2;1, and defined key residues interacting with this permeant. In a biological context, sucrose transport could constitute a novel element of plant saccharide-transporting machinery. Phylogenomic analyses of 164 Viridiplantae and 2993 Archaean, bacterial, fungal, and Metazoan aquaporins rationalized solute poly-selectivity in NIP3 sub-clade entries and suggested that they diversified from other sub-clades to acquire a unique specificity of saccharide transporters. Solute specificity definition in NIP aquaporins could inspire developing plants for food production.

Activation of Coq6p, a FAD Monooxygenase Involved in Coenzyme Q Biosynthesis, by Adrenodoxin Reductase/Ferredoxin.

Adrenodoxin reductase (AdxR) plays a pivotal role in electron transfer, shuttling electrons between NADPH and iron/sulfur adrenodoxin proteins in mitochondria. This electron transport system is essential for P450 enzymes involved in various endogenous biomolecules biosynthesis. Here, we present an in-depth examination of the kinetics governing the reduction of human AdxR by NADH or NADPH. Our results highlight the efficiency of human AdxR when utilizing NADPH as a flavin reducing agent. Nevertheless, akin to related flavoenzymes such as cytochrome P450 reductase, we observe that low NADPH concentrations hinder flavin reduction due to intricate equilibrium reactions between the enzyme and its substrate/product. Remarkably, the presence of MgCl2 suppresses this complex kinetic behavior by decreasing NADPH binding to oxidized AdxR, effectively transforming AdxR into a classical Michaelis-Menten enzyme. We propose that the addition of MgCl2 may be adapted for studying the reductive half-reactions of other flavoenzymes with NADPH. Furthermore, in vitro experiments provide evidence that the reduction of the yeast flavin monooxygenase Coq6p relies on an electron transfer chain comprising NADPH-AdxR-Yah1p-Coq6p, where Yah1p shuttles electrons between AdxR and Coq6p. This discovery explains the previous in vivo observation that Yah1p and the AdxR homolog, Arh1p, are required for the biosynthesis of coenzyme Q in yeast.

Measuring differential fitness costs and interactions between genetic cassettes using fluorescent spectrophotometry.

In this article, we present a method for designing, executing, and analyzing data from a microbial competition experiment. We use fluorescent reporters to label different competing strains and resolve individual growth curves using a fluorescent spectrophotometer. Our comprehensive data analysis pipeline integrates multiple experiments to simultaneously infer sources of variation, extract selection coefficients, and estimate the genetic contributions to fitness for various synthetic genetic cassettes (SGCs). To demonstrate the method, we employ a synthetic biological system based on Escherichia coli. Strains carry 1 of 10 different plasmids and one of three genomically integrated fluorescent markers. All strains are co-cultured to obtain real-time measurements of optical density (total population density) and fluorescence (sub-population densities). We identify challenges in calibrating between fluorescence and density and of fluorescent proteins maturing at different rates. To resolve these issues, we compare two methods of fluorescence calibration and correct for maturation by measuring in vivo maturation times. We provide evidence of genetic interactions occurring between our SGCs and further show how to use our statistical model to test some hypotheses about microbial growth and the costs of protein expression.IMPORTANCEFluorescently labeled co-cultures are becoming increasingly popular. The approach proposed here offers a high standard for experimental design and data analysis to measure selection coefficients and growth rates in competition. Measuring competitive differences is useful in many laboratory studies, allowing for fitness cost-correction of growth rates and ecological interactions and testing hypotheses in synthetic biology. Using time-resolved growth curves, rather than endpoint measurements, for competition assays allows us to construct a detailed scientific model that can be used to ask questions about fine-grained phenomena, such as bacterial growth dynamics, as well as higher-level phenomena, such as the interactions between synthetic cassette expression.

Derivative spectrophotometry-assisted determination of tryptophan metabolites emerges host and intestinal flora dysregulations during sepsis.

Sepsis is a life-threatening condition characterized by organ dysfunction resulting from a dysregulated host response to infection. Dysregulated tryptophan (TRP) metabolites serve as significant indicators for endogenous immune turnovers and abnormal metabolism in the intestinal microbiota during sepsis. Therefore, a high coverage determination of TRP and its metabolites in sepsis is beneficial for the diagnosis and prognosis of sepsis, as well as for understanding the underlying mechanism of sepsis development. However, similar structures in TRP metabolites make it challenging for separation and metabolite identification. Here, high-performance liquid chromatography coupled with a diode array detector (HPLC-DAD) was developed to determine TRP metabolites in rat serum. The first-order derivative spectrophotometry of targeted metabolites in the serum was investigated and proved to be promising for chromatographic peak annotation across different columns and systems. The established method separating the targeted metabolites was optimized and validated to be sensitive and accurate. Application of the method revealed dysregulated TRP metabolites, associated with immune disorders and NAD + metabolism in both the host and gut flora in septic rats. Our findings indicate that the derivative spectrophotometry-assisted method enhances metabolite identifications for the chromatographic systems based on DAD detectors and holds promise for precision medicine in sepsis.

Visual inspection versus spectrophotometry for xanthochromia detection in patients with sudden onset severe headache-A diagnostic accuracy study.

OBJECTIVE: There is still disagreement about whether to routinely use spectrophotometry to detect xanthochromia in cerebrospinal fluid (CSF) or whether visual inspection is adequate. We aimed to evaluate the diagnostic accuracy of these methods in detecting an aneurysmal subarachnoid hemorrhage in patients with sudden onset severe headache. BACKGROUND: When a patient presents to the emergency department with a headache for which there is suspicion of a subarachnoid hemorrhage, the gold standard to rule this out is to perform a CSF analysis for xanthochromia with or without spectrophotometry if the cranial non-contrast computed tomography (CT) upon admission is negative. METHODS: Having applied the gold standard, we retrospectively included patients with acute headache who underwent both CT scan and CSF spectrophotometry at our hospital in the period 2002-2020. Patients were excluded if the cranial CT was interpreted as positive, there was a bloody CSF, or if visual assessment data of the CSF was unavailable. We scrutinized the patients' medical records and evaluated the benefit of spectrophotometry compared to visual inspection. The net bilirubin absorbance cut-off for support of subarachnoid hemorrhage was set at >0.007 absorbance units. The spectrophotometry was also considered positive if the net bilirubin absorbance was ≤0.007 and net oxyhemoglobin absorbance was ≥0.1 absorbance units. We calculated and compared the sensitivity and specificity of CSF spectrophotometry and visual inspection of the CSF. RESULTS: In total, 769 patients, with a mean age of 42.3 ± (standard deviation [SD] = 17.3) years, were included. The headache onset was classified as a thunderclap headache in 41.5%, and 4.7% had a sudden loss of consciousness. Fifteen patients (2%) were finally diagnosed with a subarachnoid hemorrhage, six (0.8%) had an aneurysmal subarachnoid hemorrhage, seven (0.9%) had a perimesencephalic hemorrhage, one (0.1%) had a cortical cerebral sinus venous thrombosis, and one (0.1%) had a spinal epidural hematoma. Four patients (0.5%) had a subarachnoid hemorrhage that was not detected by visual inspection, and two were caused by an aneurysmal rupture. One of these two patients died just before intervention, and the other underwent coiling for an anterior communicating aneurysm. The number needed for lumbar puncture to detect a subarachnoid hemorrhage was 51, but 128 to detect an aneurysmal hemorrhage. The corresponding numbers needed for CSF spectrophotometric analysis were 192 and 385, respectively. Spectrophotometry was positive in 31 patients (4.0%), of whom 18 (2.3%) also had visually detected xanthochromia (11 true positive). The mean net bilirubin absorbance in the 13 samples with visually clear CSF was 0.0111 ± (SD = 0.0103) absorbance units, compared to 0.0017 ± (SD = 0.0013) in the CSF with negative spectrophotometry. The corresponding figures for net oxyhemoglobin absorbance were 0.0391 ± (SD = 0.0522) versus 0.0057 ± (SD = 0.0081). The sensitivity of spectrophotometric xanthochromia detection was 100% (95% confidence interval [CI], 78-100), compared to 73% (95% CI, 45-92) for visual xanthochromia detection. The specificity of spectrophotometric xanthochromia detection was 98% (95% CI, 97-99) compared to 99% (95% CI, 98-100) for visual xanthochromia detection. Both methods had high negative predictive values: 100% (95% CI, 99.5-100) versus 99.5% (95% CI, 98.6-99.9), respectively. CONCLUSIONS: Both visual inspection and spectrophotometry have high diagnostic accuracy for detecting CSF xanthochromia, but the lower sensitivity of visual assessment makes it unreliable, and we recommend the use of spectrophotometry in clinical practice.

UV-spectrophotometric Optimization of Temperature, pH, Concentration and Time for Eucalyptus Globulus Capped Silver Nanoparticles Synthesis, their Characterization and Evaluation of Biological Applications.

Morphology (size, shape) and structural variations (bonding pattern, crystallography, and atomic arrangements) have significant impacts on the efficacy of the metallic nanoparticles. Fabrication of these metal nanoparticles through green synthesis using plant extracts has increased attention due to their low cost, less hazardous byproducts, and multiple applications. In present study, Eucalyptus globulus extract was used to synthesize silver nanoparticles (AgNPs). Change of color from light brown to reddish brown and UV-visible spectral peak at 423 nm confirmed the formation of AgNPs. The shifting of FTIR spectra peaks indicated the potential role of the functional groups in extract as capping agents. The DLS evaluated the average size and stability of the nanoparticles while the surface morphology, size and the elemental composition of the AgNPs was established by the FESEM and EDX analysis. The SEM images revealed spherical nanoparticles of size ranging from 40-60 nm. Biogenic AgNPs showed better DPPH radical scavenging activity with IC50 (13.44 ± 0.3) as compared to leaves extract with IC50 (10.57 ± 0.2). The synthesized AgNPs showed higher zones of inhibition (ZOI) by well diffusion method against Escherichia coli, Staphylococcus aureus and Klebsiella pneumoniae. Results of present study highlights the potential benefits of Eucalyptus globulus leaves extract-based AgNPs for various biomedical uses.

Amber coloured plasma-Case for illustration.

INTRODUCTION: Abnormal colour of plasma is infrequently identified during processing of blood and blood components. Common reasons include haemolysis, medications or diet related. Sometimes, the aetiology is unknown. It is a dilemma for every transfusion specialist encountering this situation. Effort should be made to find the aetiology of discolouration of plasma, so that the blood donor can be suitably advised, and a decision can be made regarding the use of blood products. MATERIALS AND METHODS: We encountered two cases of orange coloured (amber coloured) plasma in our regular blood donors. All the common reasons for abnormal plasma discolouration were evaluated, including the donor's medication and diet. Spectrophotometry along with Liquid Chromatography-Mass Spectrometry (LC-MS) in both the positive and negative ion modes with literature search helped in arriving at a conclusion. RESULTS: Haemolysis was ruled out by estimation of plasma haemoglobin. Spectrophotometric analysis of the coloured plasma samples showed a peak, which was absent in normal coloured plasma. This was further investigated using Liquid Chromatography-Mass Spectrometry (LC-MS) in both the positive and negative ion modes. There was no significant difference between the coloured and normal samples in the positive ion mode. But in the negative ion mode, there was a peak observed at 110.5 and 191 m/z value in the profile of the coloured samples in comparison with the normal sample. Literature review shows the peak was corresponding to the presence of quinic acid residues-a substance found in coffee, and potentially excreted into the plasma of an individual with high coffee consumption. CONCLUSION: Reporting unusual causes associated with plasma discolouration is important. Present guidelines forbid issue of abnormal coloured blood and blood components for transfusion. Further such reports are necessary to confirm the safety of recipients receiving such units. This is the first case report to our knowledge of quinic acid discolouring blood products.

Microextraction with smartphone detection of thiocyanate in saliva of tobacco smokers using paper-based analytical method.

This study presents a novel, cost-effective approach involving spectrophotometric and smartphone paper-based (SPB) methods and a distinctive salting-out air-assisted dispersive microextraction procedure to quantify thiocyanate in saliva samples. The method relies on the inhibitory effect of thiocyanate on quinoneimine dye formation during the Emerson reaction with sodium hypochlorite. Spectrophotometry quantifies the extracted dye by monitoring quinoneimine color intensity reduction at 525 nm. In the SPB method, extracted dye is applied to a paper strip, a smartphone captures the colored paper, and an application analyzes red, green, and blue components. All analyte determination and extraction variables were explored. Both methods exhibit good linearity (10-100 µg/L) with a coefficient of determination of 0.9991 and a limit of detection of 7.5 µg/L for the spectrophotometric method, and a coefficient of determination of 0.9988 and a limit of detection of 8.8 µg/L for the SPB method. The calculated values for the enrichment factor and extraction recovery of the developed extraction methodology were 46% and 93%, respectively. The methods detect thiocyanate in saliva samples, producing results comparable to a validated method.

Determination of xanthophylls in egg yolk using a combination of spectrophotometric and diol phase high-performance liquid chromatography methods.

Normal-phase (NP) liquid chromatography is one of the most effective methods for separating isomers with sensitive structural features, including xanthophyll isomers. In this work, reverse-phase (RP) and NP liquid chromatography (LC), with silica gel and diol phase, respectively, were evaluated for the separation of xanthophyll isomers. The results showed that RP LC with monomeric C18 phase not only poorly separate all xanthophyll isomers in egg yolk but also requires additional sample preparation to eliminate triacylglycerols in egg yolk. The diol phase of NP-LC provided the highest efficiency for separating lutein, zeaxanthin, and their cis-isomers with isocratic separation using mobile phases consisting of n-hexane and polar modifiers (such as acetone, methyl tert-butyl ether, or ethyl acetate). To determine the xanthophyll content, peak areas from LC and total absorbance from spectrophotometry measurements were used. The approach was applied to analyze the xanthophylls of nine commercial egg samples. The results revealed that five out of nine analyzed samples contained a high level of canthaxanthin, which contributes to color enhancement but not to prevent age-related macular degeneration. Together, it shows that NP LC with diol phase combined with spectrophotometry is a powerful tool to monitor xanthophylls in eggs.

The first reported values of microplastics in prostate.

BACKGROUND: Microplastics are ubiquitous, widespread environmental pollutants with unavoidable human exposure. Herein, it was aimed to investigate the presence of microplastics in prostate tissue. METHODS: Prostate tissues from 12 patients who underwent Trans Urethral Resection of the Prostate (TUR-P) were analyzed to investigate the presence of microplastics. Initially, the prostate tissues were analyzed for microplastic particles using a light microscope after extraction. Subsequently, the chemical composition of the particles found in the prostate tissues was characterized using Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) spectrophotometry. RESULTS: Microplastic particles of various types were detected in 6 out of 12 patients. All detected plastic particles in this study were microplastics, with sizes below 26 µm in size. These microplastics exhibited different shapes as pellets, spheres or fibers. Overall, among the 12 analyzed prostate tissue samples, four different types of plastic were identified in six samples. The most common type of microplastic detected was Polyamide (Nylon 6), found in samples from three patients. Other detected types, Polypropylene, Polyacrylic Acid and Poly (dimethylsiloxane) were each determined in samples from one patient. CONCLUSIONS: This is the first study to demonstrate the presence of microplastics in prostate tissue, serving as an exploratory investigation, which can trigger further research to validate the results in a larger patient cohort.

A rapid spectrophotometric test for assessing skin sensitization potential of chemicals by using N-acetyl-L-cysteine methyl ester in chemico.

During the key event 1 of skin sensitization defined as covalent binding or haptenization of sensitizer to either thiol or amino group of skin proteins, a sensitizer not only covalently binds with skin proteins but also interacts with nucleophilic small molecules such as glutathione (GSH). Although GSH would not be directly associated with skin sensitization, this interaction may be applied for developing an alternative test method simulating key event 1, haptenization. Thus, the aim of the present study was to examine whether N-acetyl-L-cysteine methyl ester (NACME), a thiol-containing compound, was selected as an electron donor to determine whether NACME reacted with sensitizers. Following a reaction of NACME with a sensitizer in a 96-well plate, the remaining NACME was measured spectrophotometrically using 5,5'-dithio-bis-(2-nitrobenzoic acid) (DTNB). Following the optimization of test conditions with two different vehicles, such as acetonitrile (ACN) and dimethyl sulfoxide (DMSO), 64 test chemicals were tested to determine the predictive capacity of current NACME test method. The results obtained showed, the predictive capacity of 94.6% sensitivity, 88.9% specificity, and 92.2% accuracy utilizing DMSO as a vehicle with a cutoff NACME depletion of 5.85%. The three parameters were also over 85% in case of ACN. These values were comparable to or better than other OECD-approved test methods. Data demonstrated that a simple thiol-containing compound NACME might constitute as a reliable candidate for identifying reactive skin sensitizers, and that this method be considered as practical method as a screening tool for assessing a chemical's tendency to initiate skin sensitization.

Electrical stimulation of the lower eyelid orbicularis oculi muscle improves periocular dark circles.

BACKGROUND: We developed and tested the safety and efficacy of a cosmetic device to improve dark circles using electrical muscle stimulation of the orbicularis oculi muscle. METHODS: Overall, 18 participants (36 eyes) were studied. The following five items were evaluated before and after the intervention:(1) the Clinical Dark Circle Score using clinical findings and photographs, (2) transcutaneous oxygen partial pressure (TcPO2) on the lower eyelid, (3) thermography, (4) two-dimensional laser blood flowmetry, and (5) spectrophotometry. RESULTS: The mean score at baseline was 2.0 ± 0.90 (mean ± standard deviation), and that at the end of the study was 1.2 ± 1.0 (Wilcoxon signed-rank sum test, p < 0.0001), indicating a significant reduction. The spectrophotometer showed a significant decrease in a* and L* values before and after use (Wilcoxon signed-rank sum test, p < 0.0001). There was also a weak negative correlation between the change in score and the change in blood flow and TcPO2 measured using a laser perfusion device (Spearman's rank correlation coefficient, r = -0.32 and -0.39, respectively). Stratified analysis of the baseline score showed a strong negative correlation between the change in score and the change in spectrophotometric a* in the subjects/group with mild periocular dark circles (Spearman's rank correlation coefficient, r = -0.46). Contrastingly, no correlation was observed for any of the measurements in the subjects/group with severe periocular dark circles. After 1 month, no device-related ophthalmic adverse events were observed in any of the participants. CONCLUSION: Electrical muscle stimulation could improve periocular dark circles, especially in the subjects/group with mild periocular dark circles, and was safe.

Application of validated UV-Vis spectrophotometry-colorimetric methods for specific quantification of deferiprone in the development of iron-responsive nanoparticle loaded into dissolving microneedle.

Deferiprone (DFP) is one of the iron-chelating agents used in iron overload therapy for patients with ß-thalassemia major (ß-TM). However, the use of DFP is limited as it experiences a first-pass effect and can potentially cause iron deficiency due to uncontrolled release. Therefore, iron-responsive (NP-IR) DFP nanoparticle innovation was developed to control DFP release. A dissolving microneedle system (NP-IR-DMNs) was used to maximize DFP release. However, in support of this development, validation of analytical methods using spectrophotometry and colorimetrics was carried out. UV-Vis spectrophotometry is an approach that is easy to use, practical, and more cost-effective than others. The DFP levels were determined in normal and iron-overloaded medium solutions with 1%, 2%, and 4% concentrations. In addition, DFP levels were also measured in rat plasma using the colorimetric method with the addition of FeCl3 reagent to increase sensitivity for the detection of the analyte. The procedures used as guidelines in the validation procedure are The International Council for Harmonization (ICH). As a result, all linear correlation values of medium and plasma ≥ 0.999 were obtained. The LOQ levels obtained were 0.55 µg/mL, 0.44 µg/mL, 0.42 µg/mL, 0.52 µg/mL, and 1.01 µg/mL in plasma, 1% FeSO4, 2% FeSO4, 4% FeSO4, and normal media, respectively. The accuracy and precision were confirmed valid, as all values were within the requirements and did not change during dilution. Then, this approach was successfully applied to determine the levels of DFP in NP-IR integrated into DMNs.

Peroxidase-like activity and mechanism of gold nanoparticle-modified Ti3C2 MXenes for the construction of H2O2 and ampicillin colorimetric sensors.

Transition metal carbides modified by Au nanoparticles (Au/Ti3C2) were synthesized and developed as a colorimetric sensor for the determination of H2O2 and ampicillin. The surface electrical properties of Ti3C2 were changed, and Au nanoparticles (AuNPs) and gold growth solution were synthesized simultaneously. Au/Ti3C2 was obtained by seed growth method with AuNPs modified on the surface of transition metal carbides, nitrides or carbon-nitrides (Ti3C2 MXenes). The synthesized AuNPs and Ti3C2 had no peroxidase-like activity, but Au/Ti3C2 had. The peroxidase catalytic mechanism was due to electron transfer. The peroxidase activity of Au/Ti3C2 can be utilized for the determination of H2O2. The linear range of Au/Ti3C2 for H2O2 was 1-60 µM, and the detection limit was 0.12 µM (S/N = 3). A colometric sensor for ampicillin detection based on Au/Ti3C2 was further constructed since S in ampicillin formed an Au-S bond with Au/Ti3C2, leading to the weakening of its peroxidase-like property. The change of peroxidase-like property attenuated oxidation of TMB, and the ampicillin content was inversely proportional to the concentration of oxidized TMB, and the blue color of solution faded, which enabled the determination of ampicillin. The linear range for ampicillin was 0.005-0.5 µg mL- 1, and the detection limit was 1.1 ng mL- 1 (S/N = 3). The sensor was applied to the detection of ampicillin in milk and human serum.

MOF-based Ag NPs/Co3O4 nanozyme for colorimetric detection of thiophanate-methyl based on analyte-enhanced sensing mechanism.

Silver nanoparticles supported on metal-organic framework (ZIF-67)-derived Co3O4 nanostructures (Ag NPs/Co3O4) were synthesized via a facile in situ reduction strategy. The resulting materials exhibited pH-switchable peroxidase/catalase-like catalytic activity. Ag NP doping greatly enhanced the catalytic activity of Ag NPs/Co3O4 towards 3,3',5,5'-tetramethylbenzidine (TMB) oxidation and H2O2 decomposition which were 59 times (A652 of oxTMB) and 3 times (A240 of H2O2) higher than that of ZIF-67, respectively. Excitingly, thiophanate-methyl (TM) further enhanced the peroxidase-like activity of Ag NPs/Co3O4 nanozyme due to the formation of Ag(I) species in TM-Ag NPs/Co3O4 and generation of more radicals resulting from strong interaction between Ag NPs and TM. The TM-Ag NPs/Co3O4 nanozyme exhibited lower Km and higher Vmax values towards H2O2 when compared with Ag NPs/Co3O4 nanozyme. A simple, bioelement-free colorimetric TM detection method based on Ag NPs/Co3O4 nanozyme via analyte-enhanced sensing strategy was successfully established with high sensitivity and selectivity. Our study demonstrated that hybrid noble metal NPs/MOF-based nanozyme can be a class of promising artificial nanozyme in environmental and food safety applications.

Longitudinal analysis of microcirculatory parameters in gingival tissues after tooth extraction in patients with different risk profiles for wound healing disorders - a pilot study.

OBJECTIVES: We aimed to establish a risk profile for intraoral wound healing disorders based on measurements of microcirculation in gingival tissues. MATERIALS AND METHODS: Oxygen saturation (SO2) and blood flow in gingival tissues were measured with tissue spectrometry and laser doppler spectroscopy in 37 patients before/after tooth extractions. Patients were assigned to four groups: anamnestically and periodontally healthy patients (n = 7), anamnestically healthy but suffering from periodontitis (n = 10), anamnestically healthy but smoking and suffering from periodontitis (n = 10) and suffering from diabetes and periodontitis (n = 10). Measurements were performed at three different time points: Baseline measurement (T0), one day post extractionem (p.e.) (T1) and seven days p.e. (T2). RESULTS: Baseline SO2 values were higher in control patients (p = .038). This effect was most evident in comparison to smokers suffering from periodontitis (p = .042), followed by diabetics suffering from periodontitis (p = .09). An opposite trend was seen for blood flow. Patients suffering from periodontitis demonstrated higher blood flow values (p = .012). Five patients, which belonged to the group of smokers suffering from periodontitis, showed clinically a delayed wound healing. CONCLUSION: Differences in SO2 and blood flow of gingival tissue could be detected in different groups of patients with existing periodontitis compared to control patients. CLINICAL RELEVANCE: Lower baseline SO2 values could be a warning signal for possible wound healing disorders after oral surgery.

Evaluation of peri-implant perfusion in patients who underwent avascular augmentation or microvascular reconstruction using laser Doppler flowmetry and tissue spectrophotometry: a prospective comparative clinical study.

OBJECTIVES: The aim of this study was to evaluate the peri-implant perfusion, such as oxygen saturation, the relative amount of hemoglobin, and blood flow, in implants placed in pristine bone and avascular and microvascular grafts using a non-invasive measurement method. MATERIALS AND METHODS: A total of 58 patients with 241 implants were included. Among them, 106 implants were based in native bone (group I), 75 implants were inserted into avascular bone grafts (group II), and 60 implants were placed in microvascular bone grafts (group III). Gingival perfusion was measured using laser Doppler flowmetry and tissue spectrophotometry (LDF-TS). Implants with signs of gingival inflammation were excluded to analyze healthy implant perfusion in different bony envelopes. RESULTS: The mean values for oxygen saturation, relative hemoglobin levels, and blood flow did not differ significantly between the groups (p = 0.404, p = 0.081, and p = 0.291, respectively). There was no significant difference in perfusion between implants that were surrounded by mucosa and implants based within cutaneous transplants (p = 0.456; p = 0.628, and p = 0.091, respectively). CONCLUSION: No differences in perfusion were found between implants inserted into native bone and implants involving bone or soft tissue augmentation. However, implants based in avascular and microvascular transplants showed higher rates of peri-implant inflammation. CLINICAL RELEVANCE: Peri-implant perfusion seems to be comparable for all implants after they heal, irrespective of their bony surroundings. Although perfusion does not differ significantly, other factors may make implants in avascular and microvascular transplants vulnerable to peri-implant inflammation.

Investigating the role of chlorogenic acids and coffee type in coffee-induced teeth discoloration.

OBJECTIVE: Coffee is one of the most popular beverages in the world, with millions of people consuming it every day. The effect of coffee on teeth discoloration has long been a concern for both coffee drinkers and dental professionals. To address this concern, this study aimed to investigate the role of chlorogenic acids (CGAs) and the type of coffee in coffee-induced teeth discoloration. MATERIALS AND METHODS: High-performance liquid chromatography with a photodiode array detector was used to determine the CGA contents of instant coffee produced by five manufacturers (Starbucks, Dunkin' Donuts, Kanu, Ediya, Coffee Bean). A total of 180 bovine tooth specimens were immersed in the coffee samples for varying durations (3, 9, 24, 48, and 72 h), and the discoloration levels were measured using a spectrophotometer. A linear mixed-effects model analysis was used to determine the significance of L*, a*, and b* values in relation to the duration of coffee immersion and coffee type. RESULTS: Both immersion time and coffee type had significant effects on tooth discoloration (p < 0.001), with some types of coffee being more strongly associated with tooth discoloration than others. The amount of CGAs present in coffee was found to be positively correlated with the degree of discoloration (p = 0.030). CONCLUSIONS: Prolonged exposure to coffee can exacerbate teeth staining, and different types of coffee can cause varying degrees of discoloration. Furthermore, coffee with higher levels of CGAs may lead to greater tooth discoloration.

Effect of shade and opacity on color differences and translucency of resin composite veneers over lighter and darker substrates.

To evaluate color differences (ΔE00) and translucency parameters (TP) from mono, bi, and trilayer resin composite veneers using different opacities and shades of resin composite over lighter and darker simulated tooth-colored substrates. Mono, bi, and trilayer veneers (1.5 mm) (n = 12) were made using two shades (A1 and A2) and three opacities (enamel, body, and dentin) of resin composite over simulated lighter (A1) and darker (C4, and C4+) tooth-colored substrates. CIEDE2000 formula was used to calculate ΔE00 considering simulated tooth-colored substrate versus opacities in distinct mono, bi, and trilayer combinations of resin composite over the simulated tooth-colored substrate. The TP was calculated using color coordinates measured over standard white and black backgrounds. Differences in ΔE00 and TP values were calculated with a Three-way Analysis of Variance followed by Tukey's post-hoc test. A1E and A1B monolayer veneers showed similar TP values. Significantly higher ΔE00 values were observed over darker (C4 and C4+), and lower over lighter (A1) simulated tooth-colored substrate. Bilayer and trilayer veneers using dentin opacity provided similar ΔE00 values over the darker tooth-colored substrate. Distinct shades and opacities of resin composite layer combinations over lighter and darker tooth-colored substrates significantly affected TP and ΔE00 values. A1 shade and dentin opacity of monolayer resin composite veneers yielded higher ΔE00 values over darker tooth-colored substrates.

Assessment of 5-Hydroxymethylfurfural in Food Matrix by an Innovative Spectrophotometric Assay.

Foods contaminants pose a challenge for food producers and consumers. Due to its spontaneous formation during heating and storage, hydroxymethylfurfural (HMF) is a prevalent contaminant in foods rich in carbohydrates and proteins. Colorimetric assays, such as the Seliwanoff test, offer a rapid and cost-effective method for HMF quantification but require careful optimization to ensure accuracy. We addressed potential interference in the Seliwanoff assay by systematically evaluating parameters like incubation time, temperature, and resorcinol or hydrochloric acid concentration, as well as the presence of interfering carbohydrates. Samples were analyzed using a UV-Vis spectrophotometer in scan mode, and data obtained were validated using HPLC, which also enabled quantification of unreacted HMF for assessing the protocol's accuracy. Incubation time and hydrochloric acid percentage positively influenced the colorimetric assay, while the opposite effect was observed with the increase in resorcinol concentration. Interference from carbohydrates was eliminated by reducing the acid content in the working reagent. HPLC analyses corroborated the spectrophotometer data and confirmed the efficacy of the proposed method. The average HMF content in balsamic vinegar samples was 1.97 ± 0.94 mg/mL. Spectrophotometric approaches demonstrated to efficiently determine HMF in complex food matrices. The HMF levels detected in balsamic vinegars significantly exceeded the maximum limits established for honey. This finding underscores the urgent need for regulations that restrict contaminant levels in various food products.