Structural evolution after oxidative pretreatment and CO oxidation of Au nanoclusters with different ligand shell composition: a view on the Au core.

The reactivity of supported monolayer protected Au nanoclusters is directly affected by their structural dynamics under pretreatment and reaction conditions. The effect of different types of ligands of Au clusters supported on CeO2 on their core structure evolution, under oxidative pretreatment and CO oxidation reaction, was investigated. X-ray absorption and X-ray photoelectron spectroscopy studies revealed that the clusters evolve to a similar core structure above 250 °C in all the cases, indicating the active role of the ligand-support interaction in the reaction.

Rhodium Single-Atom Catalyst Design through Oxide Support Modulation for Selective Gas-Phase Ethylene Hydroformylation.

A frontier challenge in single-atom (SA) catalysis is the design of fully inorganic sites capable of emulating the high reaction selectivity traditionally exclusive of organometallic counterparts in homogeneous catalysis. Modulating the direct coordination environment in SA sites, via the exploitation of the oxide support's surface chemistry, stands as a powerful albeit underexplored strategy. We report that isolated Rh atoms stabilized on oxygen-defective SnO2 uniquely unite excellent TOF with essentially full selectivity in the gas-phase hydroformylation of ethylene, inhibiting the thermodynamically favored olefin hydrogenation. Density Functional Theory calculations and surface characterization suggest that substantial depletion of the catalyst surface in lattice oxygen, energetically facile on SnO2 , is key to unlock a high coordination pliability at the mononuclear Rh centers, leading to an exceptional performance which is on par with that of molecular catalysts in liquid media.

Prospects of Heterogeneous Hydroformylation with Supported Single Atom Catalysts.

The potential of oxide-supported rhodium single atom catalysts (SACs) for heterogeneous hydroformylation was investigated both theoretically and experimentally. Using high-level domain-based local-pair natural orbital coupled cluster singles doubles with perturbative triples contribution (DLPNO-CCSD(T)) calculations, both stability and catalytic activity were investigated for Rh single atoms on different oxide surfaces. Atomically dispersed, supported Rh catalysts were synthesized on MgO and CeO2. While the CeO2-supported rhodium catalyst is found to be highly active, this is not the case for MgO, most likely due to increased confinement, as determined by extended X-ray absorption fine structure spectroscopy (EXAFS), that diminishes the reactivity of Rh complexes on MgO. This agrees well with our computational investigation, where we find that rhodium carbonyl hydride complexes on flat oxide surfaces such as CeO2(111) have catalytic activities comparable to those of molecular complexes. For a step edge on a MgO(301) surface, however, calculations show a significantly reduced catalytic activity. At the same time, calculations predict that stronger adsorption at the higher coordinated adsorption site leads to a more stable catalyst. Keeping the balance between stability and activity appears to be the main challenge for oxide supported Rh hydroformylation catalysts. In addition to the chemical bonding between rhodium complex and support, the confinement experienced by the active site plays an important role for the catalytic activity.

Metal-Specific Reactivity in Single-Atom Catalysts: CO Oxidation on 4d and 5d Transition Metals Atomically Dispersed on MgO.

Understanding and tuning the catalytic properties of metals atomically dispersed on oxides are major stepping-stones toward a rational development of single-atom catalysts (SACs). Beyond individual showcase studies, the design and synthesis of structurally regular series of SACs opens the door to systematic experimental investigations of performance as a function of metal identity. Herein, a series of single-atom catalysts based on various 4d (Ru, Rh, Pd) and 5d (Ir, Pt) transition metals has been synthesized on a common MgO carrier. Complementary experimental (X-ray absorption spectroscopy) and theoretical (Density Functional Theory) studies reveal that, regardless of the metal identity, metal cations occupy preferably octahedral coordination MgO lattice positions under step-edges, hence highly confined by the oxide support. Upon exposure to O2-lean CO oxidation conditions, FTIR spectroscopy indicates the partial deconfinement of the monatomic metal centers driven by CO at precatalysis temperatures, followed by the development of surface carbonate species under steady-state conditions. These findings are supported by DFT calculations, which show the driving force and final structure for the surface metal protrusion to be metal-dependent, but point to an equivalent octahedral-coordinated M4+ carbonate species as the resting state in all cases. Experimentally, apparent reaction activation energies in the range of 96 ± 19 kJ/mol are determined, with Pt leading to the lowest energy barrier. The results indicate that, for monatomic sites in SACs, differences in CO oxidation reactivity enforceable via metal selection are of lower magnitude than those evidenced previously through the mechanistic involvement of adjacent redox centers on the oxide carrier, suggesting that tuning of the oxide surface chemistry is as relevant as the selection of the supported metal.

Local Structures of Oxygen-Deficient Perovskite Sr2ScGaO5 Polymorphs Explored by Total Neutron Scattering and EXAFS Spectroscopy.

Depending on the synthesis route, the oxygen ion electrolyte Sr2ScGaO5 shows two polymorphs, a brownmillerite and a cubic perovskite framework. In order to better explore oxygen diffusion pathways and mechanisms, we report here on a multitechnical approach to characterize local structural changes for Sr2ScGaO5 polymorphs as a function of temperature, using a neutron pair distribution function (PDF) analysis together with an extended X-ray absorption fine structure (EXAFS) analysis. While for the brownmillerite type structure PDF and Rietveld refinements yield identical structural descriptions, considerable differences are found for the cubic oxygen-deficient polymorph. On a local scale a brownmillerite type vacancy structure could be evidenced for the cubic phase, suggesting a complex short-range ordering and respective microstructure. Both PDF and EXAFS data confirm an octahedral and tetrahedral coordination for Sc and Ga, respectively, at a local scale for both polymorphs. Related changes in the bond distances and oxygen vacancy ordering are discussed.

One-Pot Cooperation of Single-Atom Rh and Ru Solid Catalysts for a Selective Tandem Olefin Isomerization-Hydrosilylation Process.

Realizing the full potential of oxide-supported single-atom metal catalysts (SACs) is key to successfully bridge the gap between the fields of homogeneous and heterogeneous catalysis. Here we show that the one-pot combination of Ru1 /CeO2 and Rh1 /CeO2 SACs enables a highly selective olefin isomerization-hydrosilylation tandem process, hitherto restricted to molecular catalysts in solution. Individually, monoatomic Ru and Rh sites show a remarkable reaction specificity for olefin double-bond migration and anti-Markovnikov α-olefin hydrosilylation, respectively. First-principles DFT calculations ascribe such selectivity to differences in the binding strength of the olefin substrate to the monoatomic metal centers. The single-pot cooperation of the two SACs allows the production of terminal organosilane compounds with high regio-selectivity (>95 %) even from industrially-relevant complex mixtures of terminal and internal olefins, alongside a straightforward catalyst recycling and reuse. These results demonstrate the significance of oxide-supported single-atom metal catalysts in tandem catalytic reactions, which are central for the intensification of chemical processes.

A flexible cell for in situ combined XAS-DRIFTS-MS experiments.

A new cell for in situ combined X-ray absorption, diffuse reflectance IR Fourier transform and mass spectroscopies (XAS-DRIFTS-MS) is presented. The cell stands out among others for its achievements and flexibility. It is possible to perform XAS measurements in transmission or fluorescence modes, and the cell is compatible with external devices like UV-light and Raman probes. It includes different sample holders compatible with the different XAS detection modes, different sample forms (free powder or self-supporting pellet) and different sample loading/total absorption. Additionally, it has a small dead volume and can operate over a wide range of temperature (up to 600°C) and pressure (up to 5 bar). Three research examples will be shown to illustrate the versatility of the cell. This cell covers a wider range of applications than any other cell currently known for this type of study.

Use of Alkylarsonium Directing Agents for the Synthesis and Study of Zeolites.

Expanding the previously known family of -onium (ammonium, phosphonium, and sulfonium) organic structure-directing agents (OSDAs) for the synthesis of zeolite MFI, a new member, the arsonium cation, is used for the first time. The new group of tetraalkylarsonium cations has allowed the synthesis of the zeolite ZSM-5 with several different chemical compositions, opening a route for the synthesis of zeolites with a new series of OSDA. Moreover, the use of As replacing N in the OSDA allows the introduction of probe atoms that facilitate the study of these molecules by powder X-ray diffraction (PXRD), solid-state nuclear magnetic resonance (MAS NMR), and X-ray absorption spectroscopy (XAS). Finally, the influence of trivalent elements such as B, Al, or Ga isomorphically replacing Si atoms in the framework structure and its interaction with the As species has been studied. The suitability of the tetraalkylarsonium cation for carrying out the crystallization of zeolites is demonstrated along with the benefit of the presence of As atoms in the occluded OSDA, which allows its advanced characterization as well as the study of its evolution during OSDA removal by thermal treatments.

Corrigendum: Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D.

This corrects the article DOI: 10.1038/nmat4757.

Generation of subnanometric platinum with high stability during transformation of a 2D zeolite into 3D.

Single metal atoms and metal clusters have attracted much attention thanks to their advantageous capabilities as heterogeneous catalysts. However, the generation of stable single atoms and clusters on a solid support is still challenging. Herein, we report a new strategy for the generation of single Pt atoms and Pt clusters with exceptionally high thermal stability, formed within purely siliceous MCM-22 during the growth of a two-dimensional zeolite into three dimensions. These subnanometric Pt species are stabilized by MCM-22, even after treatment in air up to 540 °C. Furthermore, these stable Pt species confined within internal framework cavities show size-selective catalysis for the hydrogenation of alkenes. High-temperature oxidation-reduction treatments result in the growth of encapsulated Pt species to small nanoparticles in the approximate size range of 1 to 2 nm. The stability and catalytic activity of encapsulated Pt species is also reflected in the dehydrogenation of propane to propylene.

An in situ XAS study of the activation of precursor-dependent Pd nanoparticles.

The activation of precursor-dependent Pd nanoparticles was comprehensively followed by in situ X-ray absorption spectroscopy on two inorganic supports for rationalizing the final catalytic activity. Two series of Pd-based catalysts (7 wt% Pd) were prepared by impregnation of γ-Al2O3 and activated carbon supports varying the metal precursor (Pd(NO3)2, PdCl2 and Pd(OAc)2). The most relevant physicochemical properties of the studied catalysts were determined by several techniques including ICP-OES, XRD, N2 adsorption and XAS. The results indicate that the thermal stability of the metal precursor plays an important role in the size and speciation of the formed Pd nanoparticles after the activation process. The Cl-based precursor, which presents high thermal stability, passes through a PdOxCly mixed phase when submitted to calcination on Pd/Al2O3 and leaves Cl-species after metal reduction on Pd/C (which can be detrimental to catalytic reactions). Differently, Pd(OAc)2 and Pd(NO3)2 promote the formation of larger species due to different precursor decomposition pathways. Ordered PdO is observed even before calcination when Pd(NO3)2 was used as a metallic source, which translates into large nanoparticles after reduction in H2. By using the average coordination numbers of Pd species obtained from EXAFS data of the as-reduced catalysts, a correlation was observed comparing the three precursors: PdCl2 generates smaller nanoparticles than Pd(OAc)2, which in turn generates smaller nanoparticles than Pd(NO3)2, regardless of the support used for catalyst preparation.

CO Hydrogenation on Cobalt-Based Catalysts: Tin Poisoning Unravels CO in Hollow Sites as a Main Surface Intermediate.

Site poisoning is a powerful method to unravel the nature of active sites or reaction intermediates. The nature of the intermediates involved in the hydrogenation of CO was unraveled by poisoning alumina-supported cobalt catalysts with various concentrations of tin. The rate of formation of the main reaction products (methane and propylene) was found to be proportional to the concentration of multi-bonded CO, likely located in hollow sites. The specific rate of decomposition of these species was sufficient to account for the formation of the main products. These hollow-CO are proposed to be main reaction intermediates in the hydrogenation of CO under the reaction conditions used here, while linear CO are mostly spectators.

Hydrogenation of Pyridines Using a Nitrogen-Modified Titania-Supported Cobalt Catalyst.

Novel heterogeneous catalysts were prepared by impregnation of titania with a solution of cobalt acetate/melamine and subsequent pyrolysis. The resulting materials show an unusual nitrogen-modified titanium structure through partial implementation of nitrogen into the support. The optimal catalyst displayed good activity and selectivity for challenging pyridine hydrogenation under acid free conditions in water as solvent.

A Stable Nanocobalt Catalyst with Highly Dispersed CoNx Active Sites for the Selective Dehydrogenation of Formic Acid.

Novel nanostructured catalysts with highly dispersed cobalt have been synthesized by the pyrolysis of metal phenanthroline complexes. Materials with significantly different properties were obtained by simply tuning the metal/ligand ratio. The catalytic potential of this class of compounds is shown by the first example of the dehydrogenation of formic acid under the catalysis of atomically dispersed cobalt. From TEM, XPS, and XRD characterization, KSCN poisoning, and acid leaching, the formation of CoNx species as the active site seems key to the success of this reaction. Excellent stability and recyclability make this new catalyst also attractive for other applications.

Watching Kinetic Studies as Chemical Maps Using Open-Source Software.

A nonproprietary software package, "PyMca", primarily developed for X-ray fluorescence analysis offers an easy-to-use interface for calculating maps, by integrating intensity (of X-ray fluorescence, as well as any spectral data) over Regions Of Interest (ROI), by performing per pixel operations or by applying multivariate analysis. Here we show that, while initially developed to analyze hyperspectral two-dimensional (spatial) maps, this tool can be beneficial as well to anyone interested in measuring spectral variations over one or two dimensions, these dimensions being time, temperature, and so on. Different possibilities offered by the software (preprocessing, simultaneous analysis of replicas, of different conditions, ROI calculation, multivariate analysis, determination of reaction rate constant and of Arrhenius plot) are illustrated with two examples. The first example is the Fourier transform infrared spectroscopy (FTIR) follow-up of the saponification of oil by lead compounds. The disappearance of reagent (oil) and formation of products (lead carboxylates and glycerol) can be easily followed and quantified. The second example is a combined extended X-ray absorption fine structure (EXAFS), diffuse reflectance infrared Fourier transform spectroscopy (DRIFT), and mass spectroscopy (MS) analysis of RhAl2O3 catalyst under NO reduction by CO in the presence of O2. It is possible to appreciate, in a single shot, Rh particles' structure and surface changes and gas release and adsorption in the reaction conditions.

MoS2 Nanoparticles Decorating Titanate-Nanotube Surfaces: Combined Microscopy, Spectroscopy, and Catalytic Studies.

MoS2/TNTs composites have been obtained by impregnation of titanate nanotubes (TNTs) with a centrifuged solution of nanosized MoS2 particles in isopropyl alcohol (IPA). The characterization has been performed by combining UV-vis-NIR, Raman, AFM, and HRTEM analyses, before and after impregnation. HRTEM images show that the contact between single-layer MoS2 nanoparticles and the support is efficient, so justifying the decoration concept. The volatility of IPA solvent allows the preparation of composites at low temperature and free of carbonaceous impurities. MoS2 nanoparticles have strong excitonic transitions, which are only slightly shifted with respect to the bulk because of quantum size effects. Concentrations of MoS2, less than 0.1 wt %, are enough to induce strong absorption in the visible. Photodegradation of methylene blue (MB) has been performed on TNTs and MoS2/TNTs to verify the effect of the presence of MoS2. The first layer of adsorbed MB is consumed first, followed by clustered MB in the second and more external layers. The presence of low concentrated MoS2 nanoparticles does not substantially alter the photocatalytic properties of TNTs. This result is due to poor overlapping between the high frequency of MoS2 C, D excitonic transitions and the TNTs band gap transition.

Efficient Alkyne Semihydrogenation Catalysis Enabled by Synergistic Chemical and Thermal Modifications of a PdIn MOF.

Recently, there has been a growing interest in using MOF templating to synthesize heterogeneous catalysts based on metal nanoparticles on carbonaceous supports. Unlike the common approach of direct pyrolysis of PdIn-MOFs at high temperatures, this work proposes a reductive chemical treatment under mild conditions before pyrolysis (resulting in PdIn-QT). The resulting material (PdIn-QT) underwent comprehensive characterization via state-of-the-art aberration-corrected electron microscopy, N2 physisorption, X-ray absorption spectroscopy, Raman, X-ray photoelectron spectroscopy, and X-ray diffraction. These analyses have proven the existence of PdIn bimetallic nanoparticles supported on N-doped carbon. In situ DRIFT spectroscopy reveals the advantageous role of indium (In) in regulating Pd activity in alkyne semihydrogenation. Notably, incorporating a soft nucleation step before pyrolysis enhances surface area, porosity, and nitrogen content compared to direct MOF pyrolysis. The optimized material exhibits outstanding catalytic performance with 96% phenylacetylene conversion and 96% selectivity to phenylethylene in the fifth cycle under mild conditions (5 mmol phenylacetylene, 7 mg cat, 5 mL EtOH, R.T., 1 H2 bar).

Beam Effects in Synchrotron Radiation Operando Characterization of Battery Materials: X-Ray Diffraction and Absorption Study of LiNi0.33Mn0.33Co0.33O2 and LiFePO4 Electrodes.

Operando synchrotron radiation-based techniques are a precious tool in battery research, as they enable the detection of metastable intermediates and ensure characterization under realistic cycling conditions. However, they do not come exempt of risks. The interaction between synchrotron radiation and samples, particularly within an active electrochemical cell, can induce relevant effects at the irradiated spot, potentially jeopardizing the experiment's reliability and biasing data interpretation. With the aim of contributing to this ongoing debate, a systematic investigation into these phenomena was carried out by conducting a root cause analysis of beam-induced effects during the operando characterization of two of the most commonly employed positive electrode materials in commercial Li-ion batteries: LiNi0.33Mn0.33Co0.33O2 and LiFePO4. The study spans across diverse experimental conditions involving different cell types and absorption and scattering techniques and seeks to correlate beam effects with factors such as radiation energy, photon flux, exposure time, and other parameters associated with radiation dosage. Finally, it provides a comprehensive set of guidelines and recommendations for assessing and mitigating beam-induced effects that may affect the outcome of battery operando experiments.

Structure sensitivity reaction of chloroform hydrodechlorination to light olefins using Pd catalysts supported on carbon nanotubes and carbon nanofibers.

The upgrading of wasted chloroform in hydrodechlorination for the production of olefins such as ethylene and propylene is studied by employing four catalysts (PdCl/CNT, PdCl/CNF, PdN/CNT, and PdN/CNF) prepared by different precursors (PdCl2 and Pd(NO3)2) supported on carbon nanotubes (CNT) or carbon nanofibers (CNF). TEM and EXAFS-XANES results confirm that Pd nanoparticle size increases in the order: PdCl/CNT < PdCl/CNF âˆ¼ PdN/CNT < PdN/CNF, descending the electron density of Pd nanoparticles in the same order. It illustrates that PdCl-based catalysts show donation of electrons from support to Pd nanoparticles, which is not observed in PdN-based catalysts. Moreover, this effect is more evident in CNT. The smallest and well-dispersed Pd nanoparticles (NPs) on PdCl/CNT with high electron density favor an excellent and stable activity and a remarkable selectivity to olefins. In contrast, the other three catalysts show lower selectivity to olefins and lower activities which suffer strong deactivation due to the formation of Pd carbides on their larger Pd nanoparticles with lower electron density, compared to PdCl/CNT.