Simultaneous determination of selected ionophoric coccidiostats and amino acids in feed premixes using high-performance liquid chromatography-ultraviolet detection method.

The combination of ionophoric coccidiostats and amino acids (AAs) is important in poultry feeding to enhance immunity and improve the growth and feed efficiency of birds suffering from coccidiosis. A simple, rapid, and economical high-performance liquid chromatography-ultraviolet detection (HPLC-UV) method for the simultaneous determination of three ionophoric coccidiostats, namely salinomycin (SAL), maduramicin (MAD), and monensin (MON) in addition to three AAs; L-tryptophan (L-TRP), alpha-ketoleucin (KLEU), and L-valine (L-VAL) in feed premixes was developed and validated. Chromatographic separation was achieved in less than 12 min using a phenyl hexyl column with a mobile phase consisting of acetonitrile/methanol/water (25:20:55, v/v/v) adjusted to pH 3 using phosphoric acid. Isocratic elution was performed at a flow rate of 1 mL/min with UV detection at 210 nm. The method showed good linearity in the ranges 0.50-5.0 mg/mL for MON, 0.20-2.0 mg/mL for MAD and SAL, 10.0-100.0 µg/mL for L-TRP and KLEU, and 50.0-500.0 µg/mL for VAL. The developed method was successfully applied to determine the studied analytes in feed premixes with good recoveries and precision. The good validation criteria of the proposed method allow its utilization in quality control laboratories.

A novel sustainable second-derivative synchronous spectrofluorimetric method for the simultaneous determination of olmesartan medoxomil and rosuvastatin calcium in bulk and formulations: Integrated greenness and whiteness evaluation.

The present research has established a quick and highly sensitive second-derivative synchronous fluorometric technique for the simultaneous quantification of a binary mixture of olmesartan medoxomil and rosuvastatin calcium. Simultaneously, the suggested approach was used to detect the synchronous fluorescence intensity of the cited drugs at Δ λ = 80 nm in ethanol to determine the concentrations of olmesartan medoxomil and rosuvastatin calcium at 265 and 240 nm, respectively. Various experimental conditions were tested, and each variable was analyzed and optimized. The calibration graphs were shown to be linear within ranges of 0.1-2.0 and 0.5-6.0 µg ml-1 for each drug concentration, respectively. The newly developed Green Solvents Selecting Tool (GSST) was utilized to assess the solvent's sustainability. Furthermore, the proposed method was found to be environmentally friendly after being evaluated with three different tools [the Green Analytical Procedure Index (GAPI), the Analytical Greenness Metric (AGREE), and the Analytical Eco-Scale with Eco-score equal to 95]. The whiteness qualities were also studied using the Red-Green-Blue (RGB12) model, which was recently designed and showed a high score equal to 92.9. The proposed method's good findings, as well as its ongoing sustainability, simplicity, and economy, stimulate its application in QC laboratories.

Novel spectrofluorimetric technique for determination of amoxicillin and ethopabate in chicken tissues, liver, kidney, eggs, and feed premix.

A new smart spectrofluorometric method was developed for the quantitation of amoxicillin and ethopabate simultaneously for the first time. The method is based on measuring their first derivative synchronous amplitudes in water at Δλ = 80 nm. The peak amplitudes were recorded at their crossing points; 240 nm for amoxicillin and 280 nm for ethopabate. The method is linear over the concentration ranges of 100.0-1,000.0 ng/ml for amoxicillin and 2.0-20.0 ng/ml for ethopabate. The limits of detection were 20.0 ng/ml and 0.58 ng/ml and limits of quantitation were 60.0 ng/ml and 1.92 ng/ml for amoxicillin and ethopabate, respectively. The method sensitivity permitted the determination of the two drugs below their maximum residue limit stated by the federal regulations. The developed method was applicable to the analysis of both drugs in the veterinary powders, feed premix, chicken tissues, liver, kidney, and eggs samples with percentage recoveries ranging 93.72-104.71%.

Independent concentration extraction as a novel green approach resolving overlapped UV-Vis binary spectra and HPTLC-densitometric methods for concurrent determination of levocloperastine and chlorpheniramine.

BACKGROUND: The proposed research study introduces independent concentration extraction (ICE) as a novel UV-Vis spectrophotometric approach. The approach can be used for extracting the concentration of two analytes with severely overlapped spectra from their binary mixtures. ICE is based on spectral extraction platform involving simple smart successive methods that can directly extract the original zero order spectra of the analytes at their characteristic (λmax). Chlorpheniramine maleate (CPM) and Levocloperastine fendizoate (LCF) are two commonly co-formulated drugs in cough preparations. The combined mixture was used to confirm the validity of the developed ICE tool. Another less green HPTLC was developed for the first time to separate both drugs and help also in confirming the proposed tool. METHODS: For the simultaneous determination of CPM and LCF, two ecologically friendly techniques were employed. The first approach encompasses the use of the ICE spectrophotometric method that could be successively applied for extracting the concentration of two analytes with severely overlapped unresolved spectra in their binary mixtures. Other complementary methods aiming at original spectral extraction; including spectrum subtraction (SS) and unity subtraction (US) were also successfully employed to resolve the zero order spectra of the combined drugs with all their characteristic features and peaks. The second technique used, a high-performance TLC-densitometric one, was performed on silica plates with silica plates F254 and a mobile phase with a ratio of 3:3:3:1 by volume of toluene, ethanol, acetone, and ammonia as a developing system at 230 nm. RESULTS: The presented extraction approach was executed without any optimization steps or sample pretreatment for the simultaneous determination of CPM and LCF. The method was found to be valid for their determination within concentration range of 3.0-30.0 µg mL-1 for both drugs. For HPTLC method, the resulting Rf values of CPM and LCF were 0.37 and 0.78, within concentration ranges of 0.3-4.0 µg/spot and 0.8-10.0 µg/spot, respectively. Greenness assessment of both developed methodologies showed that the HPTLC method is less green than the spectrophotometric method, yet with comparable sustainability when it comes to the used technique. CONCLUSION: The procedures were found to be selective, accurate, and precise for analysis of the studied binary mixture. Furthermore, the environmental impact of the introduced methods was assessed using novel greenness metrics, namely AGREE and Green Analytical Procedure Index (GAPI) to prove their ecological safety. In addition, white analytical chemistry (WAC) evaluation metric was employed to ensure the synergy and coherence of analytical, practical, and ecological attributes.

Central composite design driven optimization of sustainable stability indicating HPLC method for the determination of Tigecycline and greenness assessment.

Background: Tigecycline (TGC) is a recently developed antibiotic to battle resistant bacteria. The procedures outlined in the literature for analyzing TGC involve chemical solvents that could be hazardous. Therefore, this study aimed to create a sustainable and stable HPLC technique for quantifying Tigecycline in lyophilized powder. The powerful chemometric tool, experimental design (ED), will be applied to analyze the variables' interaction and impact on the selected analytical target profiles. Response surface methodology provides a tutorial on using the central composite design with three levels of variables and quadratic programming to optimize the design space of the developed method. Methods: The New HPLC method consisted of an aqueous buffer and ethanol as a green mobile phase run on a reversed-phase symmetry C18 column. A full resolution between the Tigecycline and its degradation product peaks was achieved in a short analytical runtime. Results: Further, the specificity, accuracy, precision, robustness and stability indicating power of the proposed approach were verified through stress degrading testing. Conclusions: Finally, the analytical eco-scale and the green Analytical Procedure Index (GAPI) were utilized to determine how environmentally friendly the recommended method was compared to other published approaches.