RESUMO
Non-neural extracellular matrix (ECM) has limited application in humanized physiological neural modeling due to insufficient brain-specificity and safety concerns. Although brain-derived ECM contains enriched neural components, certain essential components are partially lost during the decellularization process, necessitating augmentation. Here, it is demonstrated that the laminin-augmented porcine brain-decellularized ECM (P-BdECM) is xenogeneic factor-depleted as well as favorable for the regulation of human neurons, astrocytes, and microglia. P-BdECM composition is comparable to human BdECM regarding brain-specificity through the matrisome and gene ontology-biological process analysis. As augmenting strategy, laminin 111 supplement promotes neural function by synergic effect with laminin 521 in P-BdECM. Annexin A1(ANXA1) and Peroxiredoxin(PRDX) in P-BdECM stabilized microglial and astrocytic behavior under normal while promoting active neuroinflammation in response to neuropathological factors. Further, supplementation of the brain-specific molecule to non-neural matrix also ameliorated glial cell inflammation as in P-BdECM. In conclusion, P-BdECM-augmentation strategy can be used to recapitulate humanized pathophysiological cerebral environments for neurological study.
Assuntos
Encéfalo , Diferenciação Celular , Matriz Extracelular , Laminina , Humanos , Matriz Extracelular/metabolismo , Matriz Extracelular/química , Laminina/química , Encéfalo/metabolismo , Animais , Neurônios/metabolismo , Doenças Neuroinflamatórias/metabolismo , Suínos , Astrócitos/metabolismo , Microglia/metabolismo , Inflamação/patologiaRESUMO
BACKGROUND: Skin aging is accompanied by wrinkle formation. At some sites, such as the periorbital skin, this is a relatively early phenomenon. OBJECTIVE: We evaluated the anti-wrinkle effect of a preparation containing human growth factor and hyaluronic acid serum on periorbital wrinkles (crow's feet). MATERIALS AND METHODS: In total, 23 Korean women (age range: 39-59 years), who were not pregnant, nursing, or undergoing any concurrent therapy, were enrolled in this study. All the patients completed an 8-week trial of twice-daily application of human growth factor and hyaluronic acid serum on the entire face. Efficacy was based on a global photodamage score, photographs, and image analysis using replicas and visiometer analysis every 4 weeks. The standard wrinkle and roughness parameters used in assessing skin by visiometer were calculated and statistically analyzed. RESULTS: Periorbital wrinkles were significantly improved after treatment, with improvements noted both by physician's assessment and visiometer analysis. CONCLUSION: Topical application of human growth factor and hyaluronic acid was beneficial in reducing periorbital wrinkles.
Assuntos
Fármacos Dermatológicos/uso terapêutico , Ácido Hialurônico/uso terapêutico , Peptídeos e Proteínas de Sinalização Intercelular/uso terapêutico , Envelhecimento da Pele/efeitos dos fármacos , Administração Cutânea , Adulto , Combinação de Medicamentos , Fator de Crescimento Epidérmico/uso terapêutico , Feminino , Fator 10 de Crescimento de Fibroblastos/uso terapêutico , Fator 2 de Crescimento de Fibroblastos/uso terapêutico , Humanos , Fator de Crescimento Insulin-Like I/uso terapêutico , Pessoa de Meia-IdadeRESUMO
BACKGROUND: Facial hyperpigmentation occurs in multiple conditions. In addition, many Asian women desire a lighter skin color. Thus, there is a need for the development of skin lightening agents, and niacinamide and tranexamic acid (TXA) are promising candidates. OBJECTIVE: To assess the effectiveness of a combination of niacinamide and TXA as a topical moisturizing formulation for treatment of irregular facial pigmentation. MATERIALS AND METHODS: A total of 42 Korean women (age range: 30-60 years) who were not pregnant, nursing, or undergoing any concurrent therapy were enrolled in this study for 8 weeks. Subjects used a twice-daily regimen of either a moisturizing cream containing 2% niacinamide + 2% TXA (test formulation; n = 21) or cream vehicles (vehicle control; n = 21) in addition to an assigned sunscreen each morning. Pigmentation was measured objectively using a mexameter and chromameter, in addition to physicians' assessment using clinical photographs. RESULTS: The niacinamide + TXA formulation regimen was significantly (P < 0.05) more effective than the vehicle control formulation regimen in reducing the appearance of pigmentation. CONCLUSION: A formulation containing the combination of niacinamide + TXA reduced the appearance of irregular pigmentation, providing an effect beyond that achieved with sunscreen.
Assuntos
Preparações de Ação Retardada/administração & dosagem , Dermatoses Faciais/tratamento farmacológico , Dermatoses Faciais/patologia , Hiperpigmentação/tratamento farmacológico , Hiperpigmentação/patologia , Creme para a Pele/uso terapêutico , Ácido Tranexâmico/administração & dosagem , Administração Tópica , Adulto , Antifibrinolíticos/administração & dosagem , Fármacos Dermatológicos/administração & dosagem , Método Duplo-Cego , Combinação de Medicamentos , Emolientes/uso terapêutico , Feminino , Humanos , Pessoa de Meia-Idade , Niacinamida/administração & dosagem , Resultado do Tratamento , Complexo Vitamínico B/administração & dosagemRESUMO
Decellularized extracellular matrix (dECM) has emerged as an exceptional biomaterial that effectively recapitulates the native tissue microenvironment for enhanced regenerative potential. Although various dECM bioinks derived from different tissues have shown promising results, challenges persist in achieving high-resolution printing of flexible tissue constructs because of the inherent limitations of dECM's weak mechanical properties and poor printability. Attempts to enhance mechanical rigidity through chemical modifications, photoinitiators, and nanomaterial reinforcement have often compromised the bioactivity of dECM and mismatched the desired mechanical properties of target tissues. In response, this study proposes a novel method involving a tissue-specific rheological modifier, gelatinized dECM. This modifier autonomously enhances bioink modulus pre-printing, ensuring immediate and precise shape formation upon extrusion. The hybrid bioink with GeldECM undergoes a triple crosslinking system-physical entanglement for pre-printing, visible light photocrosslinking during printing for increased efficiency, and thermal crosslinking post-printing during tissue culture. A meticulous gelatinization process preserves the dECM protein components, and optimal hybrid ratios modify the mechanical properties, tailoring them to specific tissues. The application of this sequential multiple crosslinking designs successfully yielded soft yet resilient tissue constructs capable of withstanding vigorous agitation with high shape fidelity. This innovative method, founded on mechanical modulation by GeldECM, holds promise for the fabrication of flexible tissues with high resilience.
Assuntos
Gelatina , Reologia , Engenharia Tecidual , Gelatina/química , Animais , Matriz Extracelular/química , Tinta , Bioimpressão , Materiais Biocompatíveis/química , Alicerces Teciduais/química , Humanos , Impressão TridimensionalRESUMO
Saururus chinensis has been used in folk medicine in Korea for the treatment of edema, jaundice, gonorrhea, and several inflammatory diseases. Saururi chinensis extracts (SCE) have demonstrated anti-inflammatory and anti-oxidant activities, as well as anti-asthmatic, antihypertensive, anti-angiogenic, and therapeutic activities for atopic dermatitis. However, the inhibitory activity of SCE on the melanogenesis signaling pathway is not completely understood. This study examined the effects of SCE on the melanogenesis signaling pathway activated by α-melanocyte-stimulating hormone (α-MSH). We found that SCE inhibited melanin production in a dose-dependent manner without causing cytotoxicity in B16F10 cells. Interestingly, SCE decreased α-MSH-induced tyrosinase activity in B16F10 cells but did not inhibit tyrosinase activity under cell-free conditions. The results of this study indicate that SCE may reduce pigmentation by way of an indirect, nonenzymatic mechanism. We also found that SCE decreased α-MSH-induced microphthalmia-associated transcription factor (MITF) and tyrosinase expression and induced the activation of extracellular signal-regulated kinase (ERK). These results suggest that the depigmenting effect of SCE may result from downregulation of MITF and tyrosinase expression due to increased ERK activity. Thus, our results provide evidence that SCE might be useful as a potential skin-whitening agent.
Assuntos
Melaninas/antagonistas & inibidores , Extratos Vegetais/farmacologia , Saururaceae , Preparações Clareadoras de Pele/farmacologia , Animais , Linhagem Celular Tumoral , Sobrevivência Celular/efeitos dos fármacos , MAP Quinases Reguladas por Sinal Extracelular/metabolismo , Sistema de Sinalização das MAP Quinases/efeitos dos fármacos , Melaninas/biossíntese , Melanoma Experimental/metabolismo , Camundongos , Fator de Transcrição Associado à Microftalmia/metabolismo , Monofenol Mono-Oxigenase/metabolismo , FosforilaçãoRESUMO
Despite encouraging progress in the development ofin vitrocancer models,in vitrocancer models that simultaneously recapitulate the complexity of the tumor microenvironment and its diverse cellular components and genetic properties remain lacking. Here, an advanced vascularized lung cancer (LC) model is proposed, which includes patient-derived LC organoids (LCOs), lung fibroblasts, and perfusable vessels using 3D bioprinting technology. To better recapitulate the biochemical composition of native lung tissues, a porcine lung-derived decellularized extracellular matrix (LudECM) hydrogel was produced to offer physical and biochemical cues to cells in the LC microenvironment. In particular, idiopathic pulmonary fibrosis-derived lung fibroblasts were used to implement fibrotic niches similar to actual human fibrosis. It was shown that they increased cell proliferation and the expression of drug resistance-related genes in LCOs with fibrosis. In addition, changes in resistance to sensitizing targeted anti-cancer drugs in LCOs with fibrosis were significantly greater in LudECM than in that Matrigel. Therefore, assessment of drug responsiveness in vascularized LC models that recapitulate lung fibrosis can help determine the appropriate therapy for LC patients accompanied by fibrosis. Furthermore, it is expected that this approach could be utilized for the development of targeted therapies or the identification of biomarkers for LC patients accompanied by fibrosis.
Assuntos
Bioimpressão , Neoplasias Pulmonares , Fibrose Pulmonar , Suínos , Animais , Humanos , Avaliação de Medicamentos , Organoides/patologia , Pulmão/metabolismo , Neoplasias Pulmonares/tratamento farmacológico , Neoplasias Pulmonares/patologia , Fibrose Pulmonar/patologia , Impressão Tridimensional , Microambiente TumoralRESUMO
Owing to the prevalence of rotator cuff (RC) injuries and suboptimal healing outcome, rapid and functional regeneration of the tendon-bone interface (TBI) after RC repair continues to be a major clinical challenge. Given the essential role of the RC in shoulder movement, the engineering of biomimetic multi-tissue constructs presents an opportunity for complex TBI reconstruction after RC repair. Here, we propose a gradient cell-laden multi-tissue construct combined with compositional gradient TBI-specific bioinks via 3D cell-printing technology. In vitro studies demonstrated the capability of a gradient scaffold system in zone-specific inducibility and multi-tissue formation mimicking TBI. The regenerative performance of the gradient scaffold on RC regeneration was determined using a rat RC repair model. In particular, we adopted nondestructive, consecutive, and tissue-targeted near-infrared fluorescence imaging to visualize the direct anatomical change and the intricate RC regeneration progression in real time in vivo. Furthermore, the 3D cell-printed implant promotes effective restoration of shoulder locomotion function and accelerates TBI healing in vivo. In summary, this study identifies the therapeutic contribution of cell-printed constructs towards functional RC regeneration, demonstrating the translational potential of biomimetic gradient constructs for the clinical repair of multi-tissue interfaces.
RESUMO
In vitroorgan models allow for the creation of precise preclinical models that mimic organ physiology. During a pandemic of a life-threatening acute respiratory disease, an improved trachea model (TM) is required. We fabricated a modular assembly of the blood vessel and TMs using 3D bioprinting technology. First, decellularized extracellular matrix (dECM) were prepared using the porcine trachea and blood vessels. A trachea module was fabricated based on the tracheal mucosa-derived dECM and microporous membrane. Further, a blood vessel module was manufactured using the prepared vascular-tissue-derived dECM. By assembling each manufactured module, a perfusable vascularized TM simulating the interface between the tracheal epithelium and blood vessels was fabricated. This assembled model was manufactured with efficient performance, and it offered respiratory symptoms, such as inflammatory response and allergen-induced asthma exacerbation. These characteristics indicate the possibility of manufacturing a highly functional organ model that mimics a complex organ environment in the future.
Assuntos
Bioimpressão , Traqueia , Suínos , Animais , Engenharia Tecidual , Impressão Tridimensional , Mucosa , Epitélio , Alérgenos , Matriz Extracelular , Alicerces TeciduaisRESUMO
Tremendous advances have been made toward accurate recapitulation of the human intestinal system in vitro to understand its developmental process, and disease progression. However, current in vitro models are often confined to 2D or 2.5D microarchitectures, which is difficult to mimic the systemic level of complexity of the native tissue. To overcome this problem, physiologically relevant intestinal models are developed with a 3D hollow tubular structure using 3D bioprinting strategy. A tissue-specific biomaterial, colon-derived decellularized extracellular matrix (Colon dECM) is developed and it provides significant maturation-guiding potential to human intestinal cells. To fabricate a perfusable tubular model, a simultaneous printing process of multiple materials through concentrically assembled nozzles is developed and a light-activated Colon dECM bioink is employed by supplementing with ruthenium/sodium persulfate as a photoinitiator. The bioprinted intestinal tissue models show spontaneous 3D morphogenesis of the human intestinal epithelium without any external stimuli. In consequence, the printed cells form multicellular aggregates and cysts and then differentiate into several types of enterocytes, building junctional networks. This system can serve as a platform to evaluate the effects of potential drug-induced toxicity on the human intestinal tissue and create a coculture model with commensal microbes and immune cells for future therapeutics.
Assuntos
Bioimpressão , Engenharia Tecidual , Colo , Matriz Extracelular/química , Humanos , Intestinos , Impressão Tridimensional , Alicerces Teciduais/químicaRESUMO
BACKGROUND: Colorectal and gastric cancer are major causes of cancer-related deaths. In Korea, gastrointestinal (GI) endoscopic biopsy specimens account for a high percentage of histopathologic examinations. Lack of a sufficient pathologist workforce can cause an increase in human errors, threatening patient safety. Therefore, we developed a digital pathology total solution combining artificial intelligence (AI) classifier models and pathology laboratory information system for GI endoscopic biopsy specimens to establish a post-analytic daily fast quality control (QC) system, which was applied in clinical practice for a 3-month trial run by four pathologists. METHODS AND FINDINGS: Our whole slide image (WSI) classification framework comprised patch-generator, patch-level classifier, and WSI-level classifier. The classifiers were both based on DenseNet (Dense Convolutional Network). In laboratory tests, the WSI classifier achieved accuracy rates of 95.8% and 96.0% in classifying histopathological WSIs of colorectal and gastric endoscopic biopsy specimens, respectively, into three classes (Negative for dysplasia, Dysplasia, and Malignant). Classification by pathologic diagnosis and AI prediction were compared and daily reviews were conducted, focusing on discordant cases for early detection of potential human errors by the pathologists, allowing immediate correction, before the pathology report error is conveyed to the patients. During the 3-month AI-assisted daily QC trial run period, approximately 7-10 times the number of slides compared to that in the conventional monthly QC (33 months) were reviewed by pathologists; nearly 100% of GI endoscopy biopsy slides were double-checked by the AI models. Further, approximately 17-30 times the number of potential human errors were detected within an average of 1.2 days. CONCLUSIONS: The AI-assisted daily QC system that we developed and established demonstrated notable improvements in QC, in quantitative, qualitative, and time utility aspects. Ultimately, we developed an independent AI-assisted post-analytic daily fast QC system that was clinically applicable and influential, which could enhance patient safety.
Assuntos
Inteligência Artificial , Neoplasias Colorretais , Humanos , Biópsia , Endoscopia Gastrointestinal , Controle de Qualidade , Neoplasias Colorretais/diagnósticoRESUMO
Kidney organoids derived from human pluripotent stem cells (hPSCs) have extensive potential for disease modelling and regenerative medicine. However, the limited vascularization and immaturity of kidney organoids have been still remained to overcome. Extracellular matrix (ECM) can provide mechanical support and a biochemical microenvironment for cell growth and differentiation. Here in vitro methods using a kidney decellularized extracellular matrix (dECM) hydrogel to culture hPSC-derived kidney organoids, which have extensive vascular network and their own endothelial cells, are reported. Single-cell transcriptomics reveal that the vascularized kidney organoids cultured using the kidney dECM have more mature patterns of glomerular development and higher similarity to human kidney than those cultured without the kidney dECM. Differentiation of α-galactosidase A (GLA)-knock-out hPSCs generated using CRISPR/Cas9 into kidney organoids by the culture method using kidney dECM efficiently recapitulate Fabry nephropathy with vasculopathy. Transplantation of kidney organoids with kidney dECM into kidney of mouse accelerates the recruitment of endothelial cells from the host mouse kidney and maintains vascular integrity with the more organized slit diaphragm-like structures than those without kidney dECM. The kidney dECM methodology for inducing extensive vascularization and maturation of kidney organoids can be applied to studies for kidney development, disease modeling, and regenerative medicine.
Assuntos
Organoides , Células-Tronco Pluripotentes , Animais , Matriz Extracelular Descelularizada , Células Endoteliais , Humanos , Rim , CamundongosRESUMO
A wide variety of experimental models including 2D cell cultures, model organisms, and 3D in vitro models have been developed to understand pathophysiological phenomena and assess the safety and efficacy of potential therapeutics. In this sense, 3D in vitro models are an intermediate between 2D cell cultures and animal models, as they adequately reproduce 3D microenvironments and human physiology while also being controllable and reproducible. Particularly, recent advances in 3D in vitro biomimicry models, which can produce complex cell structures, shapes, and arrangements, can more similarly reflect in vivo conditions than 2D cell culture. Based on this, 3D bioprinting technology, which enables to place the desired materials in the desired locations, has been introduced to fabricate tissue models with high structural similarity to the native tissues. Therefore, this review discusses the recent developments in this field and the key features of various types of 3D-bioprinted tissues, particularly those associated with blood vessels or highly vascularized organs, such as the heart, liver, and kidney. Moreover, this review also summarizes the current state of the three categories: (1) chemical substance treatment, (2) 3D bioprinting of lesions, and (3) recapitulation of tumor microenvironments (TME) of 3D bioprinting-based disease models according to their disease modeling approach. Finally, we propose the future directions of 3D bioprinting approaches for the creation of more advanced in vitro biomimetic 3D tissues, as well as the translation of 3D bioprinted tissue models to clinical applications.
RESUMO
Islet transplantation is a promising treatment for type 1 diabetes. However, treatment failure can result from loss of functional cells associated with cell dispersion, low viability, and severe immune response. To overcome these limitations, various islet encapsulation approaches have been introduced. Among them, macroencapsulation offers the advantages of delivering and retrieving a large volume of islets in one system. In this study, we developed a hybrid encapsulation system composed of a macroporous polymer capsule with stagger-type membrane and assemblable structure, and a nanoporous decellularized extracellular matrix (dECM) hydrogel containing pancreatic islet-like aggregates using 3D bioprinting technique. The outer part (macroporous polymer capsule) was designed to have an interconnected porous architecture, which allows insulin-producingß-cells encapsulated in the hybrid encapsulation system to maintain their cellular behaviors, including viability, cell proliferation, and insulin-producing function. The inner part (nanoporous dECM hydrogel), composed of the 3D biofabricated pancreatic islet-like aggregates, was simultaneously placed into the macroporous polymer capsule in one step. The developed hybrid encapsulation system exhibited biocompatibilityin vitroandin vivoin terms of M1 macrophage polarization. Furthermore, by controlling the printing parameters, we generated islet-like aggregates, improving cell viability and functionality. Moreover, the 3D bioprinted pancreatic islet-like aggregates exhibited structural maturation and functional enhancement associated with intercellular interaction occurring at theß-cell edges. In addition, we also investigated the therapeutic potential of a hybrid encapsulation system by integrating human pluripotent stem cell-derived insulin-producing cells, which are promising to overcome the donor shortage problem. In summary, these results demonstrated that the 3D bioprinting approach facilitates the fabrication of a hybrid islet encapsulation system with multiple materials and potentially improves the clinical outcomes by driving structural maturation and functional improvement of cells.
Assuntos
Bioimpressão , Ilhotas Pancreáticas , Células-Tronco Pluripotentes , Bioimpressão/métodos , Humanos , Hidrogéis/química , Insulina/metabolismo , Células-Tronco Pluripotentes/metabolismo , Polímeros , Impressão Tridimensional , Engenharia Tecidual/métodos , Alicerces Teciduais/químicaRESUMO
PURPOSE: This study aimed to reduce radiation doses to the tongue, a patient-specific semi-customized tongue immobilization device (SCTID) was developed using a 3D printer for helical tomotherapy (HT) of nasopharyngeal cancer (NPCa). Dosimetric characteristics and setup stability of the SCTID were compared with those of a standard mouthpiece (SMP). MATERIALS AND METHODS: For displacement and robust immobilization of the tongue, the SCTID consists of four parts: upper and lower tooth stoppers, tongue guider, tongue-tip position guide bar, and connectors. With the SCTID and SMP, two sets of planning computed tomography and HT plans were obtained for 10 NPCa patients. Dosimetric and geometric characteristics were compared. Position reproducibility of the tongue with SCTID was evaluated by comparing with planned dose and adaptive accumulated dose of the tongue and base of the tongue based on daily setup mega-voltage computed tomography. RESULTS: Using the SCTID, the tongue was effectively displaced from the planning target volume compared to the SMP. The median mucosa of the tongue (M-tongue) dose was significantly reduced (20.7 Gy vs. 27.8 Gy). The volumes of the M-tongue receiving a dose of 15 Gy, 30 Gy, and 45 Gy and the volumes of the mucosa of oral cavity and oropharynx (M-OC/OP) receiving a dose of 45 Gy and 60 Gy were significantly lower than using the SMP. No significant differences was observed between the planned dose and the accumulated adaptive dose in any dosimetric characteristics of the tongue and base of tongue. CONCLUSION: SCTID can not only reduce the dose to the M-tongue and M-OC/OP dramatically, when compared to SMP, but also provide excellent reproducibility and easy visual verification.
Assuntos
Imageamento Tridimensional/métodos , Neoplasias Nasofaríngeas/radioterapia , Língua/patologia , Adulto , Feminino , Humanos , Masculino , Pessoa de Meia-IdadeRESUMO
Growth factors are important for regulating a variety of cellular processes and typically act as signaling molecules between cells. In the present study, we examined the mechanisms underlying the inhibitory effects of mixtures of recombinant growth factors (MRGFs) on nitric oxide (NO) and pro-inflammatory cytokine production in lipopolysaccharide (LPS)-stimulated RAW 264.7 cells. We also examined whether these effects are mediated through the mitogenactivated protein kinase (MAPK) and nuclear factor-κB (NF-κB) signal transduction pathways. NO production was assessed by measuring nitrite acucmulation using the Greiss reaction. Cytokine concentrations were measured using respective ELISA kits for each cytokine. Our results revealed that the MRGFs significantly attenuated the LPS-induced production of pro-inflammatory cytokines and NO in a dose-dependent manner. To elucidate the mechanisms underlying the inhibitory effects of MRGFs, we examined the effects of the LPS-induced phosphorylation of MAPKs and the activation of the NF-κB signaling pathway on the stabilization of NF-κB nuclear translocation and inhibitory factor-κB (IκB) degradation. Western blot analysis was performed to determine the total and phosphorylated levels of ERK, as well as the nuclear translocation of NF-κB, and IκB phosphorylation and degradation. Our results demonstrated that treatment with MRGFs resulted in a reduction in the phosphorylation of the ERK and NF-κB signaling pathways, whereas the phosphorylation of JNK and p38 was not affected. Taken together, our results suggest that MRGFs inhibit the production of pro-inflammatory cytokines and NO by downregulating inducible NO synthase gene expression and blocking the phosphorylation of the ERK and NF-κB signaling pathways. These findings may provide direct evidence of the potential application of MRGFs in the prevention and treatment of inflammatory diseases.
Assuntos
Citocinas/biossíntese , Fator de Crescimento Epidérmico/deficiência , Inflamação/tratamento farmacológico , Inflamação/metabolismo , Fator de Crescimento Insulin-Like I/deficiência , Insulina/deficiência , Óxido Nítrico/metabolismo , Animais , Citocinas/efeitos dos fármacos , Fator de Crescimento Epidérmico/administração & dosagem , Inflamação/induzido quimicamente , Insulina/administração & dosagem , Fator de Crescimento Insulin-Like I/administração & dosagem , Lipopolissacarídeos/toxicidade , Erros Inatos do Metabolismo , Camundongos , Proteínas Quinases Ativadas por Mitógeno/biossíntese , NF-kappa B/efeitos dos fármacos , NF-kappa B/metabolismo , Óxido Nítrico Sintase Tipo II/biossíntese , Transdução de Sinais/efeitos dos fármacosRESUMO
BACKGROUND: Over the last decade, the incidence of ultraviolet B (UVB)-related skin problems has increased. Oxidative stress caused by UVB induces the secretion of melanocyte growth and activating factors from keratinocytes, which results in the formation of cutaneous hyperpigmentation. Therefore, increasing the antioxidant abilities of skin cells is thought to be a beneficial strategy for the development of sunscreen agents. Superoxide dismutase 1 (SOD1) is an antioxidant enzyme that is known to exhibit antioxidant properties. OBJECTIVE: The purpose of this study was to investigate the effect of SOD1 on alpha-melanocyte stimulating hormone (α-MSH) and UVB-induced melanogenesis in B16F10 melanoma cells and HRM-2 melanin-possessing hairless mice. METHODS: The inhibitory effect of SOD1 on tyrosinase activity was evaluated in a cell-free system. Additional experiments were performed using B16F10 melanoma cells to demonstrate the effects of SOD1 in vitro, and HRM-2 melanin-possessing hairless mice were used to evaluate the antimelanogenic effects of SOD1 in vivo. RESULTS: We found that SOD1 inhibited melanin production in a dose-dependent manner without causing cytotoxicity in B16F10 melanoma cells. SOD1 did not inhibit tyrosinase activity under cell-free conditions. The results indicate that SOD1 may reduce pigmentation by an indirect, nonenzymatic mechanism. We also found that SOD1 decreased UVB-induced melanogenesis in HRM-2 melanin-possessing hairless mice, as visualized through hematoxylin and eosin staining and Fontana-Masson staining. CONCLUSION: Our results indicate that SOD1 has an inhibitory effect on α-MSH and UVB-induced melanogenesis, indicating that SOD1 may be a promising sunscreen agent.
RESUMO
Application of growth factor mixtures has been used for wound healing and anti-wrinkles agents. The aim of this study was to evaluate the effect of recombinant growth factor mixtures (RGFM) on the expression of cell cycle regulatory proteins, type I collagen, and wound healing processes of acute animal wound models. The results showed that RGFM induced increased rates of cell proliferation and cell migration of human skin fibroblasts (HSF). In addition, expression of cyclin D1, cyclin E, cyclin-dependent kinase (Cdk)4, and Cdk2 proteins was markedly increased with a growth factor mixtures treatment in fibroblasts. Expression of type I collagen was also increased in growth factor mixtures-treated HSF. Moreover, growth factor mixtures-induced the upregulation of type I collagen was associated with the activation of Smad2/3. In the animal model, RGFM-treated mice showed accelerated wound closure, with the closure rate increasing as early as on day 7, as well as re-epithelization and reduced inflammatory cell infiltration than phosphate-buffered saline (PBS)-treated mice. In conclusion, the results indicated that RGFM has the potential to accelerate wound healing through the upregulation of type I collagen, which is partly mediated by activation of Smad2/3-dependent signaling pathway as well as cell cycle progression in HSF. The topical application of growth factor mixtures to acute and chronic skin wound may accelerate the epithelization process through these molecular mechanisms.