Self-Healing Polymeric Soft Actuators.

Natural evolution has provided multicellular organisms with sophisticated functionalities and repair mechanisms for surviving and preserve their functions after an injury and/or infection. In this context, biological systems have inspired material scientists over decades to design and fabricate both self-healing polymeric materials and soft actuators with remarkable performance. The latter are capable of modifying their shape in response to environmental changes, such as temperature, pH, light, electrical/magnetic field, chemical additives, etc. In this review, we focus on the fusion of both types of materials, affording new systems with the potential to revolutionize almost every aspect of our modern life, from healthcare to environmental remediation and energy. The integration of stimuli-triggered self-healing properties into polymeric soft actuators endow environmental friendliness, cost-saving, enhanced safety, and lifespan of functional materials. We discuss the details of the most remarkable examples of self-healing soft actuators that display a macroscopic movement under specific stimuli. The discussion includes key experimental data, potential limitations, and mechanistic insights. Finally, we include a general table providing at first glance information about the nature of the external stimuli, conditions for self-healing and actuation, key information about the driving forces behind both phenomena, and the most important features of the achieved movement.

Highly efficient and reusable CuAu nanoparticles supported on crosslinked chitosan hydrogels as a plasmonic catalyst for nitroarene reduction.

The synthesis of CuAu-based monometallic (MNPs) and bimetallic nanoparticles (BNPs) supported on chitosan-based hydrogels for their application as catalysts is presented. The hydrogels consisted of chitosan chains cross-linked with tripolyphosphate (TPP) in the form of beads with an approximate average diameter of 1.81 mm. The MNPs and BNPs were obtained by the adsorption of metallic ions and their subsequent reduction with hydrazine, achieving a metallic loading of 0.297 mmol per gram of dry sample, with average nanoparticle sizes that were found between 2.6 and 4.4 nm. Both processes, metal adsorption and the stabilization of the nanoparticles, are mainly attributed to the participation of chitosan hydroxyl, amine and amide functional groups. The materials revealed important absorption bands in the visible region of the light spectra, specifically between 520 and 590 nm, mainly attributed to LSPR given the nature of the MNPs and BNPs inside the hydrogels. Subsequently, the hydrogels were evaluated as catalysts against the reduction of 4-nitrophenol (4NP) into 4-aminophenol (4AP), followed by UV-visible spectroscopy. The kinetic advance of the reaction revealed important improvements in the catalytic activity of the materials by synergistic effect of BNPs and plasmonic enhancement under visible light irradiation, given the combination of metals and the light harvesting properties of the nanocomposites. Finally, the catalytic performance of hydrogels containing BNPs CuAu 3:1 showed an important selectivity, recyclability and reusability performance, due to the relevant interaction of the BNPs with the chitosan matrix, highlighting the potential of this nanocomposite as an effective catalyst, with a potential environmental application.

Dual-mode colorimetric/fluorescent chemosensor for Cu2+/Zn2+ and fingerprint imaging based on rhodamine ethylenediamine bis(triazolyl silsesquioxane).

A novel dual functional and visual rhodamine ethylenediamine bis(triazolyl silsesquioxane) (RBS) chemosensor was successfully synthesized using "click" chemistry. The results have unambiguously demonstrated that RBS can act in fluorescent and colorimetric sensing of Cu2+ and Zn2+ by their respective coordination with triazole structures and, more importantly, it has also been found that triazole-amide of RBS could turn on chelation-enhanced fluorescence (CHEF) of Cu2+. Remarkably, the addition of Cu2+ triggered an enhanced fluorescent emission by 63.3-fold (ϕF = 0.41), while Zn2+ enhanced it 48.3-fold (ϕF = 0.29) relative to the original RBS (ϕF = 0.006) in acetonitrile (MeCN) solvent. The fluorescent limit of detection for Cu2+ and Zn2+ is similar and fall within 3.0 nM, while under colorimetric sensing the responses were 2.14 × 10-8 and 4.0 × 10-8 mol L-1, respectively. Moreover, the effective sensing profile of RBS and extended applications of RBS-Cu2+ and RBS-Zn2+ for fingerprinting detection and imaging were observed with adequate sensitivity, stability and legibility under the dual visual responses.

Biomass-derived isosorbide-based thermoresponsive hydrogel for drug delivery.

Herein, we describe the design and synthesis of a new variety of bio-based hydrogel films using a Cu(I)-catalyzed photo-click reaction. These films exhibited thermal-triggered swelling-deswelling and were constructed by crosslinking a triazide derivative of glycerol ethoxylate and dialkyne structures derived from isosorbide, a well-known plant-based platform molecule. The success of the click reaction was corroborated through infrared spectroscopy (FTIR) and the smooth surface of the obtained films was confirmed by scanning electron microscopy (SEM). The thermal characterization was carried out in terms of thermogravimetry (TGA) and differential scanning calorimetry (DSC), from which the decomposition onset and glass transition temperatures were determined, respectively. Additionally, mechanical properties of the samples were estimated by stress-strain experiments. Then, their swelling and deswelling properties were systematically examined in PBS buffer, revealing a thermoresponsive behavior that was successfully tested in the release of the anticancer drug doxorubicin. We also confirmed the non-cytotoxicity of these materials, which is a fundamental aspect for their potential use as drug carriers or tissue engineering matrices.

Intramolecular Nicholas Reaction Enables the Stereoselective Synthesis of Strained Cyclooctynes.

Cyclic products can be obtained through the intramolecular version of the Nicholas reaction, which requires having the nucleophile connected to the alkyne unit. Here, we report the synthesis of 1-oxa-3-cyclooctynes starting from commercially available (1R,3S)-camphoric acid. The strategy is based on the initial preparation of propargylic alcohols, complexation of the triple bond with Co2(CO)8, and treatment with BF3·Et2O to induce an intramolecular Nicholas reaction with the free hydroxyl group as nucleophile. Finally, oxidative deprotection of the alkyne afforded the cyclooctynes in good yields. Notably, large-sized R substituents at the chiral center connected to the O atom were oriented in such a way that steric interactions were minimized in the cyclization, allowing the formation of cyclooctynes exclusively with (R) configuration, in good agreement with theoretical predictions. Moreover, preliminary studies demonstrated that these cyclooctynes were reactive in the presence of azides yielding substituted triazoles.

The Prospect of Photochemical Reactions in Confined Gel Media.

Nature is intrinsically able to control kinetics, conversion, and selectivity of biochemical processes by means of confined reaction environments such as enzyme pockets, bilayer membranes, micelles, vesicles, cells, or bioorganic frameworks. The main reason for this fact is the optimal molecular alignment and restricted motion of reactant molecules compared to those found in bulk solution. Under this inspiration, a number of synthetic photo-nanoreactors based on supramolecular self-assembled systems have been developed during the last decades, including mesoporous inorganic materials, microemulsions, micelles, vesicles, lipid bilayer foams, polyelectrolyte nanoparticles, etc. In a broader sense, nanoreactor technology constitutes nowadays a promising tool to enhance organic synthesis under sustainable reaction conditions. In general, nanoreactors change the essential properties of the molecules within them, thus affecting their chemical reactivity. Among the nanoreactor-like systems described in the literature to facilitate photochemical processes, the more recent use of viscoelastic supramolecular gels, typically made of low-molecular-weight (LMW) compounds self-assembled through noncovalent interactions, as compartmentalized reaction media is particularly appealing due to the versatility of these materials in terms of fabrication, properties, and processability. Furthermore, the high specific surface areas found in supramolecular gels, their stimuli-responsive reversibility, good diffusion properties enhancing the interactions between reactants and the three-dimensional (3D) porous network, functional tunability, and blocking effect of external oxygen are some of the most important features that can benefit photoinduced processes carried out in confined gel media. Not surprisingly, the efficiency of photochemical processes inside gel media is largely dependent on the type of reaction, characteristics of the gel network, solvent nature, reactant properties, and reaction conditions. Thus, the main focus of this Account is to provide a concise overview of the most relevant examples reported by us and others in order to illustrate the main advantages associated with the emerging use of gel-based materials as nonconventional reaction media to facilitate and control photochemical reactions. In particular, photodimerization, triplet-triplet annihilation upconversion (TTA-UC) coupled to single electron transfer (SET), photooxidation, photoreduction, and trifluoromethylation reactions will be illustrated during the discussion. These examples suggest that gel-based media can provide a versatile platform for the discovery of new reaction pathways and facilitate the way that photochemical reactions are traditionally carried out in academia and industry in terms of reaction conditions and required infrastructure. In addition, the use of physical or chemical gels as reaction systems may also accelerate high-throughput screening of photocatalysts. Overall, a judicious choice of gelators, reactants, solvent, and reaction conditions for the assembly of these gelators is crucial for controlling conversion, kinetics, and selectivity of intragel photoinduced processes.

Fluorescent-Labeled Octasilsesquioxane Nanohybrids as Potential Materials for Latent Fingerprinting Detection.

The recent demand for fluorescent-labeled materials (FLMs) in forensic security concepts such as latent fingerprints (LFs) that encode information for anti-counterfeiting and encryption of confidential data makes necessary the development of building new and innovative materials. Here, novel FLMs based on polyhedral oligomeric silsesquioxanes (POSS) functionalized with fluorophores via "click" reactions have been successfully synthesized and fully characterized. A comprehensive study of their photophysical properties has displayed large Stokes's shift together with good photostability in all cases, fulfilling the fundamental requisites for any legible LF detection on various surfaces. The excellent performance of the hetero-bifunctional FLM in the visualization of LF is emphasized by their legibility, selectivity, sensitivity and temporal photostability. In this study, development mechanisms have been proposed and the overall concept constitute a novel approach for vis-à-vis forensic investigations to trace an individual's identity.

Advanced Functional Hydrogel Biomaterials Based on Dynamic B-O Bonds and Polysaccharide Building Blocks.

Dynamic covalent chemistry applied to polymers has attracted significant attention over the past decade. Within this area, this review highlights the recent research on polysaccharide-based hydrogels cross-linked by boronic acid moieties, illustrating its versatility and relevance in biomaterials science to design self-healing, multiple stimuli-responsive, and adaptive biointerfaces and advanced functional devices.

On the sensitivity of alginate rheology to composition.

The linear response of alginate-phenyl boronic acid (Alg-PBA) esters shows a universal, composition-independent viscoelastic fluid-like behaviour. Reversible association of alginates governs their rheology at all compositions (viz. at all alginate concentrations and solution pH). However, their high strain behaviour is very sensitive to composition. Tuning composition affords liquids that neck to form filaments capable of being drawn to large elongations without failure. We interpret our data by invoking strain-dependent association and dissociation rates for the alginates. High association rates at high strain result in materials with viscoelastic liquid like behaviour.

Antimicrobial activity of poly(3,4-ethylenedioxythiophene) n-doped with a pyridinium-containing polyelectrolyte.

In spite of p-doped conducting polymers having been widely studied in the last decades and many applications having been developed, studies based on n-doped conducting polymers are extremely scarce. This fact is even more evident when it comes to conducting polymers n-doped with polycations, even though polyanions, such as poly(styrenesulfonate), are often used to obtain p-doped conducting polymers. In this work poly(pyridinium-1,4-diyliminocarbonyl-1,4-phenylene-methylene chloride), abbreviated as P(Py-1,4-P), has been used to prepare n-doped poly(3,4-ethylenedioxythiophene) (PEDOT) electrodes by applying a reduction potential to a de-doped PEDOT film in a P(Py-1,4-P) water solution. The utilization of this cationic polyelectrolyte as an n-dopant agent results in drastic superficial changes, as is observed by comparing the morphology, topography and wettability of p-doped, de-doped and n-doped PEDOT. Cytotoxicity, cell adhesion and cell proliferation assays, which have been conducted using epithelial and fibroblast cell lines, show that the amount of P(Py-1,4-P) in the re-doped PEDOT films is below that required to observe a cytotoxic harmful response and that n-doped PEDOT:P(Py-1,4-P) films are biocompatible. The non-specific bacteriostatic properties of n-doped PEDOT:P(Py-1,4-P) films have been demonstrated against E. coli and S. aureus bacteria (Gram-negative and Gram-positive, respectively) using bacterial growth curves and adhesion assays. Although the bacteriostatic effect is in part due to the conducting polymer, as is proved by results for p-doped and de-doped PEDOT, the incorporation of P(Py-1,4-P) through the re-doping process greatly enhances this antimicrobial behaviour. Thus, only a small concentration of this cationic polyelectrolyte (∼0.1 mM) is needed to inhibit bacterial growth.

Release of small bioactive molecules from physical gels.

Pharmaceutical drugs with low water solubility have always received great attention within the scientific community. The reduced bioavailability and the need of frequent administrations have motivated the investigation of new drug delivery systems. Within this context, drug carriers that release their payload in a sustained way and hence reduce the administration rate are highly demanded. One interesting strategy to meet these requirements is the entrapment of the drugs into gels. So far, the most investigated materials for such drug-loaded gels are derived from polymers and based on covalent linkages. However, over the last decade the use of physical (or supramolecular) gels derived from low molecular weight compounds has experienced strong growth in this field, mainly due to important properties such as injectability, stimuli responsiveness and ease of synthesis. This review summarizes the use of supramolecular gels for the encapsulation and controlled release of small therapeutic molecules.

Isosteric Substitution of 4 H-1,2,4-Triazole by 1 H-1,2,3-Triazole in Isophthalic Derivative Enabled Hydrogel Formation for Controlled Drug Delivery.

In this work, we demonstrated that the simple substitution of the 1,2,4-triazole moiety in 5-( 4H-1,2,4-triazol-4-yl)isophthalic acid (5-TIA) by the 1 H-1,2,3-triazol-5-yl unit enables the preparation of a hydrogelator (click-TIA). In sharp contrast to 5-TIA, its isostere click-TIA undergoes self-assembly in water upon sonication, leading to the formation of stable supramolecular viscoelastic hydrogels with a critical gelation concentration of 6 g/L. Hydrogels made of click-TIA as well as hybrid hydrogels made of the mixture click-TIA + 5-TIA (molar ratio 1:0.2) were used to compare different properties of the materials (i.e., rheological properties, thermal properties, mechanical stability, morphology). In terms of toxicity, neither click-TIA nor 5-TIA showed cytotoxic effects on cellular viability of HeLa cells up to 2.3 × 10-3 g/L when compared to untreated cells incubated with DMSO. Furthermore, the hydrogels were used for the encapsulation and in vitro controlled release of oxytetracycline that followed first-order kinetics. For the hydrogel made of click-TIA, a maximum drug release of ∼60% was reached after ∼8 h within a pH range between 6.5 and 10. However, the release rate was reduced to approximately half of its value at pH values between 1.2 and 5.0, whereas the use of hybrid hydrogels made of click-TIA + 5-TIA allowed to reduce the original rate at pH ≤ 6.5.

Air-Sensitive Photoredox Catalysis Performed under Aerobic Conditions in Gel Networks.

In this work, we demonstrate that useful C-C bond-forming photoredox catalysis can be performed in air using easily prepared gel networks as reaction media to give similar results as are obtained under inert atmosphere conditions. These reactions are completely inhibited in homogeneous solution in air. However, the supramolecular fibrillar gel networks confine the reactants and block oxygen diffusion, allowing air-sensitive catalytic activity under ambient conditions. We investigate the mechanism of this remarkable protection, focusing on the boundary effect in the self-assembled supramolecular gels that enhances the rates of productive reactions over diffusion-controlled quenching of excited states. Our observations suggest the occurrence of triplet-sensitized chemical reactions in the gel networks within the compartmentalized solvent pools held between the nanofibers. The combination of enhanced viscosity and added interfaces in supramolecular gel media seems to be a key factor in facilitating the reactions under aerobic conditions.

Cationic ionene as an n-dopant agent of poly(3,4-ethylenedioxythiophene).

We report the reduction of poly(3,4-ethylenedioxythiophene) (PEDOT) films with a cationic 1,4-diazabicyclo[2.2.2]octane-based ionene bearing N,N'-(meta-phenylene)dibenzamide linkages (mPI). Our main goal is to obtain n-doped PEDOT using a polymeric dopant agent rather than small conventional tetramethylammonium (TMA), as is usual. This has been achieved using a three-step process, which has been individually optimized: (1) preparation of p-doped (oxidized) PEDOT at a constant potential of +1.40 V in acetonitrile with LiClO4 as the electrolyte; (2) dedoping of oxidized PEDOT using a fixed potential of -1.30 V in water; and (3) redoping of dedoped PEDOT applying a reduction potential of -1.10 V in water with mPI. The resulting films display the globular appearance typically observed for PEDOT, with mPI being structured in separated phases forming nanospheres or ultrathin sheets. This organization, which has been supported by atomistic molecular dynamics simulations, resembles the nanosegregated phase distribution observed for PEDOT p-doped with poly(styrenesulfonate). Furthermore, the doping level achieved using mPI as the doping agent is comparable to that achieved using TMA, even though ionene provides distinctive properties to the conducting polymer. For example, films redoped with mPI exhibit much more hydrophilicity than the oxidized ones, whereas films redoped with TMA are hydrophobic. Similarly, films redoped with mPI exhibit the highest thermal stability, while those redoped with TMA show thermal stability that is intermediate between those of the latter and the dedoped PEDOT. Overall, the incorporation of an mPI polycation as the n-dopant into PEDOT has important advantages for modulating the properties of this emblematic conducting polymer.

Metal- and Oxidant-Free Photoinduced Aromatic Trifluoromethylation Performed in Aerated Gel Media: Determining the Effects on Yield and Selectivity.

In this work we have investigated the potential benefits of using supramolecular gel networks as reaction media to carry out air-sensitive metal-free light-induced trifluoromethylation of six-membered (hetero)arenes under aerobic conditions. This reaction was performed at room temperature (RT) using sodium triflinate (CF3SO2Na, Langlois' reagent) as a source of radicals and diacetyl as electron donor. The effects of confinement in gel media, concentration of reactants, and type of light source on yield and product distribution were evaluated and compared to the results obtained in homogeneous solution. Four different low molecular weight (LMW) gelators were employed in this study. The results confirmed the blocking effect of the gel medium against reaction quenching by external oxygen, as well as a certain control on the kinetics and selectivity.

Synthesis and supramolecular self-assembly of glutamic acid-based squaramides.

We describe the preparation and characterization of two new unsymmetrical squaramide-based organogelators. The synthesis of the compounds was carried out by subsequent amine condensations starting from dimethyl squarate. The design of the gelators involved a squaramide core connected on one side to a long aliphatic chain and on the other side to a glutamic acid residue. The gelator bearing the free carboxylic groups showed a lower gelation capacity than its precursor diester derivative. Some selected gels were further studied by infrared spectroscopy, rheology and electron microscopy. Critical gelation concentrations and gel-to-sol transition temperatures were also determined for each case. In addition, the superior squaramide diester gelator was compared with an analogue triazole-based gelator in terms of critical gelation concentration, gelation kinetics and thermal phase transition.

Targeted Drug Delivery in Covalent Organic Nanosheets (CONs) via Sequential Postsynthetic Modification.

Covalent organic nanosheets (CONs) have emerged as a new class of functional two-dimensional (2D) porous organic polymeric materials with a high accessible surface, diverse functionality, and chemical stability. They could become versatile candidates for targeted drug delivery. Despite their many advantages, there are limitations to their use for target specific drug delivery. We anticipated that these drawbacks could be overturned by judicious postsynthetic modification steps to use CONs for targeted drug delivery. The postsynthetic modification would not only produce the desired functionality, it would also help to exfoliate to CONs as well. In order to meet this requirement, we have developed a facile, salt-mediated synthesis of covalent organic frameworks (COFs) in the presence of p-toluenesulfonic acid (PTSA). The COFs were subjected to sequential postsynthetic modifications to yield functionalized targeted CONs for targeted delivery of 5-fluorouracil to breast cancer cells. This postsynthetic modification resulted in simultaneous chemical delamination and functionalization to targeted CONs. Targeted CONs showed sustained release of the drug to the cancer cells through receptor-mediated endocytosis, which led to cancer cell death via apoptosis. Considering the easy and facile COF synthesis, functionality based postsynthetic modifications, and chemical delamination to CONs for potential advantageous targeted drug delivery, this process can have a significant impact in biomedical applications.

Aromatic ionene topology and counterion-tuned gelation of acidic aqueous solutions.

Unusual gelation of acidic solutions was achieved using polycations bearing quaternary ammonium moieties. These ionene polymers are based on a disubstituted phenylene dibenzamide core, which allows the construction of different topomers (i.e. ortho-1, meta-2 and para-3). The topology of the polymers was found to play a key role on their aggregation behaviour both in pure water and in a variety of aqueous acidic solutions leading to the formation of stable acidic gels. Specifically, ortho-1 showed superior gelation ability than the analogues meta-2 and para-3 in numerous solutions of different pH and ionic strengths. Lower critical gelation concentrations, higher gel-to-sol transition temperatures and faster gelation were usually observed for ortho-1 regardless the solvent system. Detailed computational molecular dynamic simulations revealed a major role of the counterion (Cl-) and specific polymerpolymer interactions. In particular, hydrogen bonds, N-Hπ interactions and intramolecular π-π stacking networks are distinctive in ortho-1. In addition, counterions located at internal hydration regions also affect to such polymerpolymer interactions, acting as binders and, therefore, providing additional stability.

Ultrasonication-enhanced gelation properties of a versatile amphiphilic formamidine-based gelator exhibiting both organogelation and hydrogelation abilities.

We describe the preparation of a novel amphiphilic gelator built from a formamidine core, which is able to form a variety of physical organogels and hydrogels at concentrations ranging from 15 to 150 mg mL-1. Interestingly, ultrasound treatment of isotropic solutions (i.e., gel-precursor) resulted in a remarkable enhancement of the gelation kinetics as well as the gelation scope and characteristic gel properties (e.g., critical gelation concentration, gel-to-sol transition temperature, viscoelastic moduli) in comparison to the heating-cooling protocol typically used to obtain supramolecular gels. Thermoreversibility, thixotropy, injectability and multistimuli responsiveness are some of the most relevant functionalities of these gels. Electron microscopy imaging revealed the formation of entangled networks made of fibers of nanometer diameters and micrometer lengths, with different morphological features depending on the solvent. Insights into the driving forces for molecular aggregations were obtained from FTIR, NMR, PXRD and computational studies. The results suggest a major stabilization of the fibers through additive N-HO hydrogen bonds, in combination with hydrophobic interactions, over π-π stacking interactions.

Transfection of Antisense Oligonucleotides Mediated by Cationic Vesicles Based on Non-Ionic Surfactant and Polycations Bearing Quaternary Ammonium Moieties.

Three different ionene polymers with varying quaternary ammonium moieties were used as a proof of concept for the formulation of antisense oligonucleotides, which are capable of inhibiting Renilla luciferase messenger ribonucleic acid (mRNA). Cationic vesicles, consisting of cationic polymer, antisense oligonucleotide (Luc) and non-ionic surfactant polysorbate 80, were investigated regarding their ζ potential, cytotoxicity and transfection efficiency. Deoxyribonucleic acid- (DNA) forming complexes in the presence of cationic vesicles were also investigated in terms of small-angle X-ray scattering (SAXS). The studied cationic vesicles showed very little, if any, toxicity against HeLa cells. Transfection abilities proved to vary strongly depending on the present quaternary ammonium moiety.