RESUMO
Proper risk analysis needs to be in place to understand the susceptibility of protein to unfold and aggregate in the presence of interfacial and/or shear stress. Certain techniques, such as agitation/shaking studies, have been traditionally used to understand the impact of these stresses on the protein physical stability. However, the stresses applied in these systems are convoluted, making it difficult to define the control strategy (i.e., adjustment in process parameters to reduce foaming/bubble formation, change pump type). We have developed two small-scale tools that allow for the isolation of interfacial and shear stress, respectively. These systems, in combination with computational fluid dynamics and numerical approximations, help simulate the normal operating ranges as well as the proven acceptable ranges for different unit operations such as tangential flow filtration (TFF), mixing, and filling.
Assuntos
Produtos Biológicos/química , Química Farmacêutica/instrumentação , Estabilidade de Medicamentos , Processamento de Imagem Assistida por Computador , Tamanho da Partícula , Estabilidade Proteica , Proteínas/química , Estresse MecânicoRESUMO
Therapeutic proteins are subjected to a variety of stresses during manufacturing, storage or administration, that often lead to undesired protein aggregation and particle formation. Ultrafiltration-diafiltration (UF-DF) processing of monoclonal antibodies (mAbs) is one such manufacturing step that has been shown to result in such physical degradation. In this work, we explore the use of different analytical techniques and lab-scale setups as methodologies to predict and rank-order the aggregation potential of four different mAbs during large-scale UF-DF processing. In the first part of the study, a suite of biophysical techniques was applied to assess differences in their inherent bulk protein properties including conformational and colloidal stability in a PBS buffer. Additionally, the inherent interfacial properties of these mAbs in PBS were measured using a Langmuir trough technique. In the next part of the study, several different scale-down lab models were evaluated including a lab bench-scale UF-DF setup, mechanical stress (shaking/stirring) studies in vials, and application of interfacial dilatational stress using a Langmuir trough to assess protein particle formation in different UF-DF processing buffers. Taken together, our results demonstrate the ability of a Langmuir-trough methodology to accurately predict the mAb instability profile observed during large scale UF-DF processing.
Assuntos
Anticorpos Monoclonais , Ultrafiltração , Agregados Proteicos , Ultrafiltração/métodosRESUMO
The past decade has seen the materialization of immune checkpoint blockade as an emerging approach to cancer treatment. However, the overall response and patient survival are still modest. Various efforts to study the "cancer immunogram" have highlighted complex biology that necessitates a multipronged approach. This includes increasing the antigenicity of the tumor, strengthening the immune infiltration in the tumor microenvironment, removing the immunosuppressive mechanisms, and reducing immune cell exhaustion. The coordination of these approaches, as well as the ability to enhance them through delivery, is evaluated. Due to their success in multiple preclinical models, external-stimuli-responsive nanoparticles have received tremendous attention. Several studies report success in distantly located tumor regression, metastases, and reoccurrence in preclinical mouse models. However, clinical translation in this space remains low. Herein, the recent advancement in external-stimuli-responsive nanoconstruct-synergized immune checkpoint blockade is summarized, offering an industry perspective on the limitations of current academic innovations and discussing challenges in translation from a technical, manufacturing, and regulatory perspective. These limitations and challenges will need to be addressed to establish external-stimuli-based therapeutic strategies for patients.
RESUMO
Protein adsorbed at the silicone oil-water interface can undergo a conformational change that has the potential to induce protein aggregation on storage. Characterization of the protein structures at interface is therefore critical for understanding the protein-interface interactions. In this article, we have applied sum frequency generation (SFG) spectroscopy for studying the secondary structures of a fusion protein at interface and the surfactant effect on protein adsorption to silicone oil-water interface. SFG and chiral SFG spectra from adsorbed protein in the amide I region were analyzed. The presence of beta-sheet vibrational band at 1635 cm-1 implies the protein secondary structure was likely perturbed when protein adsorbed at silicone oil interface. The time-dependent SFG study showed a significant reduction in the SFG signal of preadsorbed protein when polysorbate 20 was introduced, suggesting surfactant has stronger interaction with the interface leading to desorption of protein from the interface. In the preadsorbed surfactant and a mixture of protein/polysorbate 20, SFG analysis confirmed that surfactant can dramatically prevent the protein adsorption to silicone oil surface. This study has demonstrated the potential of SFG for providing the detailed molecular level understanding of protein conformation at interface and assessing the influence of surfactant on protein adsorption behavior.
Assuntos
Proteínas/química , Óleos de Silicone/química , Água/química , Adsorção/efeitos dos fármacos , Polissorbatos/química , Estrutura Secundária de Proteína , Análise Espectral/métodos , Propriedades de Superfície , Tensoativos/química , VibraçãoRESUMO
High concentration protein solutions are generally produced by spin column concentration (SCC) during early development and by tangential flow filtration (TFF) during later stages, when greater quantities of protein become available. This is based on the assumption that the protein generated by the SCC process would be fairly similar to the TFF process material. In this study, we report the case of high concentration solutions of an Fc fusion protein produced by the two processes using the same upstream drug substance (DS) with very different storage stability. The TFF and SCC batches were characterized for aggregation, viscosity, and hydrodynamic radius before and after storage at different temperatures (5°C, 25⯰C, and 40⯰C). Aggregation and viscosity of the solutions processed by TFF were higher than those processed by SCC upon storage at 25⯰C and 40⯰C for three months. Differential scanning fluorimetry (DSF) revealed differences in initial protein conformation. Upon exposure to shear stress, protein solutions showed conformational instability and increased aggregation upon storage at 35⯰C. In addition, protein solution showed higher aggregation upon shearing under mixed (downstream purification process and final formulation) buffer conditions - which are more likely to be encountered during the TFF, but not SCC, process. These results were further confirmed in an independent experiment by Fourier transform-infrared (FT-IR) spectroscopy and aggregation analysis. Taken together, these data indicate that shearing the protein in intermediate, unstable buffer conditions can lead to conformational perturbation during TFF processing, which led to higher rate of aggregation and viscosity upon storage. This study highlights the importance of testing shear stress sensitivity in the transitional buffer states of the TFF process early in development to de-risk process related product instability.
Assuntos
Proteínas Recombinantes de Fusão/química , Soluções Tampão , Estabilidade de Medicamentos , Armazenamento de Medicamentos , Fragmentos Fc das Imunoglobulinas/química , Conformação Proteica , Temperatura , ViscosidadeRESUMO
Copolymers of 4-methacryloyloxyazobenzene and N,N-dimethylacrylamide (MOAB-DMA) can aggregate strongly in aqueous solution (they are soluble in water up to a MOAB molar fraction of 0.2) to give concentration-dependent aggregate size distributions and well-defined boundaries between the dilute and semidilute regimes, as determined by dynamic light scattering, surface tension, and probe solubilization experiments. The copolymers are strongly surface active, an uncommon observation for random copolymers, and exhibit pronounced photoviscosity effects at higher concentrations. The concentration dependence of the kinetic parameters for the reversible polymer rearrangement upon photoisomerization, as determined by electronic absorption spectroscopy, is attributed to steric hindrances. Trans-to-cis isomerization under UV light leads to partial dissociation of the azobenzene aggregates that cross-link the polymers, thereby significantly affecting the polymer solution rheology, with a consequent loss of viscoelasticity upon UV irradiation, especially in concentrated polymer solutions.
RESUMO
Photoresponsive poly(N,N-dimethylacrylamide-co-methacryloyloxyazobenzene) (DMA-MOAB) and temperature-responsive Pluronic F127 (F127) copolymers were blended to obtain systems responsive to both stimuli that are potentially useful for pharmaceutical formulations. The random DMA-MOAB copolymer undergoes a trans to cis isomerization when irradiated by 366 nm light, which modifies both the air-water interfacial behavior and the self-associative properties of the copolymer. Under dark conditions the azobenzene groups of DMA-MOAB in the trans conformation self-associate and the interactions with F127 are minimal. The cis conformation of the azobenzene groups of the DMA-MOAB copolymer is relatively more hydrophilic than the trans conformation, which causes the copolymer micelles to dissociate upon irradiation, allowing the unimers to form mixed micelles with the F127. This causes the sol-gel transition temperature of the DMA-MOAB:F127 blend to be 10 degrees C lower upon irradiation at 366 nm compared to that for the dark conditions. It has been found that F127 (10-12 wt %):DMA-MOAB (5-6 wt %) aqueous solutions have at body temperature a low viscosity when equilibrated in the dark and undergo a sol-gel transition when irradiated. Such a transition strongly alters the diffusion of solutes such as methylene blue within the solutions. This light-induced interaction between the azobenzene moieties of DMA-MOAB and F127 micelles disappears when hydroxypropyl-beta-cyclodextrin (HPbetaCD) is added to the medium. In the presence of HPbetaCD, the cis-azobenzene groups are hosted in the cyclodextrin cavities and the mixed micelles are not formed. Therefore, changes in HPbetaCD concentration could be used to modulate the response of the copolymer blends to light.
Assuntos
Resinas Acrílicas/química , Luz , Metacrilatos/química , Preparações Farmacêuticas/química , Poloxâmero/química , 2-Hidroxipropil-beta-Ciclodextrina , Ar , Compostos Azo/química , Micelas , Transição de Fase , Soluções/química , Espectrofotometria Ultravioleta , Estereoisomerismo , Temperatura , Fatores de Tempo , Água/química , beta-Ciclodextrinas/químicaRESUMO
The interactions of DNA (salmon testes) with two new cationic block copolymers made of poly(2-dimethylaminoethyl) methacrylate and poly(ethylene oxide), PEO-pDMAEMA, or poly(ethylene oxide)-poly(propylene oxide)-poly(ethylene oxide), L92-pDMAEMA, were studied with the aim to understand their different in vitro transfection efficiencies when used as nonviral delivery vectors. PEO-pDMAEMA does not show surface activity while L92-pDMAEMA is as surface active as its parent Pluronic L92. Surface tension, titration microcalorimetry, ethidium bromide displacement, and zeta-potential measurements were carried out in phosphate buffers at pH 5 and 7. The association of L92-pDMAEMA with DNA was strongly exothermic at both pHs; the critical aggregation concentration (CAC) corresponded to a N/P ratio of 0.3, the maximum energy evolved was reached for N/P ratios of 0.82 and 1.27 at pH 5 and pH 7, respectively, and the saturation occurred for N/P ratios close to 2. The presence of L92 in the structure of this new block copolymer apparently did not modify the thermodynamic parameters of the interaction with DNA. In contrast, the interaction with PEO-pDMAEMA was significantly less exothermic, and CAC and saturation occurred for N/Ps equal to 0.43 and 1.37, respectively. The strong affinity of L92-pDMAEMA for DNA was reflected in its capacity to displace ethidium bromide and in the jump in the values of the zeta potential when N/P is near 1. Above the N/P ratio at which electroneutral polyplexes are formed, only at pH 5 an excess of L92-pDMAEMA is incorporated in the complexes, resulting in positively charged complexes. The profile of the zeta-potential values obtained for mixtures of L92-pDMAEMA with Pluronic P123 showed a shift to a lower N/P ratio, owing to an easier interaction of L92-pDMAEMA molecules with DNA in the presence of P123. Additionally, a visual inspection of the systems indicates that P123 contributes to stabilize/solubilize the DNA/cationic polymer aggregates, by avoiding the typical phase separation near the charge neutralization point. The information obtained can be particularly useful to optimize the conditions to form efficient polyplexes for gene delivery systems.
Assuntos
DNA/química , Metacrilatos/química , Polietilenoglicóis/química , Polímeros/química , Propilenoglicóis/química , Animais , Fenômenos Biofísicos , Biofísica , Masculino , Nylons , Salmão , Testículo/químicaRESUMO
A facile, one-step synthesis of cationic block copolymers of poly(2-N-(dimethylaminoethyl) methacrylate) (pDMAEMA) and copolymers of poly(propylene oxide) (PPO) and poly(ethylene oxide) (PEO) has been developed. The PEO-PPO-PEO-pDMAEMA (L92-pDMAEMA) and PEO-pDMAEMA copolymers were obtained via free radical polymerization of DMAEMA initiated by polyether radicals generated by cerium(IV). Over 95% of the copolymer fraction was of molecular mass ranging from 6.9 to 7.1 kDa in size, indicating the prevalence of the polyether-monoradical initiation mechanism. The L92-pDMAEMA copolymers possess parent surfactant-like surface activity. In contrast, the PEO-pDMAEMA copolymers lack significant surface activity. Both copolymers can complex with DNA. Hydrodynamic radii of the complexes of the L92-pDMAEMA and PEO-pDMAEMA with plasmid DNA ranged in size from 60 to 400 nm, depending on the copolymer/DNA ratio. Addition of Pluronic P123 to the L92-pDMAEMA complexes with DNA masked charges and decreased the tendency of the complex to aggregate, even at stoichiometric polycation/DNA ratios. The transfection efficiency of the L92-pDMAEMA copolymer was by far greater than that of the PEO-pDMAEMA copolymer. An extra added Pluronic P123 further increased the transfecton efficacy of L92-pDMAEMA, but did not affect that of PEO-pDMAEMA.