Comprehensive meta-QTL analysis for dissecting the genetic architecture of stripe rust resistance in bread wheat.

BACKGROUND: Yellow or stripe rust, caused by the fungus Puccinia striiformis f. sp. tritici (Pst) is an important disease of wheat that threatens wheat production. Since developing resistant cultivars offers a viable solution for disease management, it is essential to understand the genetic basis of stripe rust resistance. In recent years, meta-QTL analysis of identified QTLs has gained popularity as a way to dissect the genetic architecture underpinning quantitative traits, including disease resistance. RESULTS: Systematic meta-QTL analysis involving 505 QTLs from 101 linkage-based interval mapping studies was conducted for stripe rust resistance in wheat. For this purpose, publicly available high-quality genetic maps were used to create a consensus linkage map involving 138,574 markers. This map was used to project the QTLs and conduct meta-QTL analysis. A total of 67 important meta-QTLs (MQTLs) were identified which were refined to 29 high-confidence MQTLs. The confidence interval (CI) of MQTLs ranged from 0 to 11.68 cM with a mean of 1.97 cM. The mean physical CI of MQTLs was 24.01 Mb, ranging from 0.0749 to 216.23 Mb per MQTL. As many as 44 MQTLs colocalized with marker-trait associations or SNP peaks associated with stripe rust resistance in wheat. Some MQTLs also included the following major genes- Yr5, Yr7, Yr16, Yr26, Yr30, Yr43, Yr44, Yr64, YrCH52, and YrH52. Candidate gene mining in high-confidence MQTLs identified 1,562 gene models. Examining these gene models for differential expressions yielded 123 differentially expressed genes, including the 59 most promising CGs. We also studied how these genes were expressed in wheat tissues at different phases of development. CONCLUSION: The most promising MQTLs identified in this study may facilitate marker-assisted breeding for stripe rust resistance in wheat. Information on markers flanking the MQTLs can be utilized in genomic selection models to increase the prediction accuracy for stripe rust resistance. The candidate genes identified can also be utilized for enhancing the wheat resistance against stripe rust after in vivo confirmation/validation using one or more of the following methods: gene cloning, reverse genetic methods, and omics approaches.

Delineating Marker-Trait Associations for Fusarium Wilt in Chickpea Using the Axiom® CicerSNP Array.

Fusarium wilt (FW) caused by Fusarium oxysporum f. sp. ciceri is a devastating disease of chickpea (Cicer arietinum). To identify promising resistant genotypes and genomic loci for FW resistance, a core set of 179 genotypes of chickpea was tested for FW reactions at the seedling and reproductive stages under field conditions and controlled conditions in the greenhouse. Our results revealed that at the seedling stage, most of the genotypes were resistant, whereas at the reproductive stage, most of the genotypes were susceptible. Genotyping using a 50K Axiom® CicerSNP Array and trait data of FW together led to the identification of 26 significant (P ≤ E-05) marker-trait associations (MTAs) for FW resistance. Among the 26 MTAs, 12 were identified using trait data recorded in the field (three at the seedling and nine at the reproductive stage), and 14 were identified using trait data recorded under controlled conditions in the greenhouse (six at the seedling and eight at the reproductive stage). The phenotypic variation explained by these MTAs varied from 11.75 to 15.86%, with an average of 13.77%. Five MTAs were classified as major, explaining more than 15% of the phenotypic variation for FW, and two were declared stable, being identified in two environments. One of the promising stable and major MTAs (Affx_123280060) detected in field conditions at the reproductive stage was also detected in greenhouse conditions at the seedling and reproductive stages. The stable and major (>15% PVE) MTAs can be used in chickpea breeding programs.

Comprehensive biochemical approach for understanding the interaction between host "common bean" and pathogen "Colletotrichum lindemuthianum" causing bean anthracnose.

Anthracnose (ANT) caused by Colletotrichum lindemuthianum is the most devastating seed-borne fungal disease of common bean. In response to fungal infections, it is hypothesized that pathogen-plant interactions typically cause hypersensitive reactions by producing reactive oxygen species, hydrogen peroxide and lipid peroxidation of cell membranes. esent study was conducted by inoculating susceptible bean genotype "SB174" and resistant bean genotype "E10" with pathogen "C. lindemuthianum". Defense-related enzymes (ascorbate peroxidase, peroxidase, lipid peroxidase, and catalase) and C-based compounds (total phenols and flavonoids) were studied using the detached bean leaf method. Comparative defense response was studied in different plant tissues (pod, stem, and seed) in susceptible and resistant bean genotypes under uninoculated and pathogen-inoculated conditions. The host‒pathogen interaction was studied at mock inoculation, 2, 4 and 6 days after inoculation (dai). Comparing the pathogen-inoculated bean leaves to water-treated bean leaves, defense enzymes as well as total phenols and flavonoids exhibited differential expression. In a comparative study, the enzyme activity also displayed differential biochemical responses in pods, stems and seeds in both contrasting genotypes. For example, 5.1-fold (pod), 1.5-fold (stem) and 1.06-fold (seed) increases in ascorbate peroxidase activity were observed in the susceptible genotype at 6 dai compared to mock inoculation. Similarly, catalase activity in pods was upregulated (1.47-fold) in the resistant genotype and downregulated (1.30-fold) in the susceptible genotype at 6 dai. The study revealed that defense-related antioxidative enzymes, phenols and flavonoids are fine-tuned to detoxify important reactive oxygen species (ROS) molecules, induce systemic resistance and are successfully controlled in common bean plants against pathogen invasion.

Lipidomics-Assisted GWAS (lGWAS) Approach for Improving High-Temperature Stress Tolerance of Crops.

High-temperature stress (HT) over crop productivity is an important environmental factor demanding more attention as recent global warming trends are alarming and pose a potential threat to crop production. According to the Sixth IPCC report, future years will have longer warm seasons and frequent heat waves. Thus, the need arises to develop HT-tolerant genotypes that can be used to breed high-yielding crops. Several physiological, biochemical, and molecular alterations are orchestrated in providing HT tolerance to a genotype. One mechanism to counter HT is overcoming high-temperature-induced membrane superfluidity and structural disorganizations. Several HT lipidomic studies on different genotypes have indicated the potential involvement of membrane lipid remodelling in providing HT tolerance. Advances in high-throughput analytical techniques such as tandem mass spectrometry have paved the way for large-scale identification and quantification of the enormously diverse lipid molecules in a single run. Physiological trait-based breeding has been employed so far to identify and select HT tolerant genotypes but has several disadvantages, such as the genotype-phenotype gap affecting the efficiency of identifying the underlying genetic association. Tolerant genotypes maintain a high photosynthetic rate, stable membranes, and membrane-associated mechanisms. In this context, studying the HT-induced membrane lipid remodelling, resultant of several up-/down-regulations of genes and post-translational modifications, will aid in identifying potential lipid biomarkers for HT tolerance/susceptibility. The identified lipid biomarkers (LIPIDOTYPE) can thus be considered an intermediate phenotype, bridging the gap between genotype-phenotype (genotype-LIPIDOTYPE-phenotype). Recent works integrating metabolomics with quantitative genetic studies such as GWAS (mGWAS) have provided close associations between genotype, metabolites, and stress-tolerant phenotypes. This review has been sculpted to provide a potential workflow that combines MS-based lipidomics and the robust GWAS (lipidomics assisted GWAS-lGWAS) to identify membrane lipid remodelling related genes and associations which can be used to develop HS tolerant genotypes with enhanced membrane thermostability (MTS) and heat stable photosynthesis (HP).

Root-omics for drought tolerance in cool-season grain legumes.

Root traits can be exploited to increase the physiological efficiency of crop water use under drought. Root length, root hairs, root branching, root diameter, and root proliferation rate are genetically defined traits that can help to improve the water productivity potential of crops. Recently, high-throughput phenotyping techniques/platforms have been used to screen the germplasm of major cool-season grain legumes for root traits and their impact on different physiological processes, including nutrient uptake and yield potential. Advances in omics approaches have led to the dissection of genomic, proteomic, and metabolomic structures of these traits. This knowledge facilitates breeders to improve the water productivity and nutrient uptake of cultivars under limited soil moisture conditions in major cool-season grain legumes that usually face terminal drought. This review discusses the advances in root traits and their potential for developing drought-tolerant cultivars in cool-season grain legumes.

Genomics Associated Interventions for Heat Stress Tolerance in Cool Season Adapted Grain Legumes.

Cool season grain legumes occupy an important place among the agricultural crops and essentially provide multiple benefits including food supply, nutrition security, soil fertility improvement and revenue for farmers all over the world. However, owing to climate change, the average temperature is steadily rising, which negatively affects crop performance and limits their yield. Terminal heat stress that mainly occurred during grain development phases severely harms grain quality and weight in legumes adapted to the cool season, such as lentils, faba beans, chickpeas, field peas, etc. Although, traditional breeding approaches with advanced screening procedures have been employed to identify heat tolerant legume cultivars. Unfortunately, traditional breeding pipelines alone are no longer enough to meet global demands. Genomics-assisted interventions including new-generation sequencing technologies and genotyping platforms have facilitated the development of high-resolution molecular maps, QTL/gene discovery and marker-assisted introgression, thereby improving the efficiency in legumes breeding to develop stress-resilient varieties. Based on the current scenario, we attempted to review the intervention of genomics to decipher different components of tolerance to heat stress and future possibilities of using newly developed genomics-based interventions in cool season adapted grain legumes.

Drought and High Temperature Stress in Sorghum: Physiological, Genetic, and Molecular Insights and Breeding Approaches.

Sorghum is one of the staple crops for millions of people in Sub-Saharan Africa (SSA) and South Asia (SA). The future climate in these sorghum production regions is likely to have unexpected short or long episodes of drought and/or high temperature (HT), which can cause significant yield losses. Therefore, to achieve food and nutritional security, drought and HT stress tolerance ability in sorghum must be genetically improved. Drought tolerance mechanism, stay green, and grain yield under stress has been widely studied. However, novel traits associated with drought (restricted transpiration and root architecture) need to be explored and utilized in breeding. In sorghum, knowledge on the traits associated with HT tolerance is limited. Heat shock transcription factors, dehydrins, and genes associated with hormones such as auxin, ethylene, and abscisic acid and compatible solutes are involved in drought stress modulation. In contrast, our understanding of HT tolerance at the omic level is limited and needs attention. Breeding programs have exploited limited traits with narrow genetic and genomic resources to develop drought or heat tolerant lines. Reproductive stages of sorghum are relatively more sensitive to stress compared to vegetative stages. Therefore, breeding should incorporate appropriate pre-flowering and post-flowering tolerance in a broad genetic base population and in heterotic hybrid breeding pipelines. Currently, more than 240 QTLs are reported for drought tolerance-associated traits in sorghum prospecting discovery of trait markers. Identifying traits and better understanding of physiological and genetic mechanisms and quantification of genetic variability for these traits may enhance HT tolerance. Drought and HT tolerance can be improved by better understanding mechanisms associated with tolerance and screening large germplasm collections to identify tolerant lines and incorporation of those traits into elite breeding lines. Systems approaches help in identifying the best donors of tolerance to be incorporated in the SSA and SA sorghum breeding programs. Integrated breeding with use of high-throughput precision phenomics and genomics can deliver a range of drought and HT tolerant genotypes that can improve yield and resilience of sorghum under drought and HT stresses.

First report of 'Candidatus Liberibacter solanacearum' on carrot in Serbia.

At the beginning of July 2020, three-month-old carrot plants (Daucus carota L. variety Maestro F1) grown in a commercial field 1.2 ha in size at the Begec locality (45°14'30.38" N 19°36'44.82" E) in southern part of the Backa region, Vojvodina, Serbia, exhibited symptoms of yellowing and reddish leaf discoloration. At the end of July, leaves on the infected plants became bronze and purplish, while their shoots and roots were stunted due to dehydration, with pronounced proliferation. In some cases, the damage was so extensive that it led to plant decay. The disease incidence of 0.5-1% recorded early in July rapidly escalated, reaching 10-15% in the first ten days of August. The observed symptoms resembled those caused by 'Candidatus Liberibacter solanacearum' (CaLso), a phloem-limited proteobacterium (1). To detect and identify CaLso, 15 symptomatic diseased and 5 asymptomatic healthy carrot plants were subjected to conventional polymerase chain reactions (PCR) using two primer sets specific to CaLso, and positive PCR products were further sequenced using commercial facilities (Macrogen Europe). Total DNA was extracted from petiole and root tissues using a commercial kit (Qiagen DNEasy Plant Mini Kit) following the manufacturer-recommended protocol. In the first PCR, using the Lso TX 16/23 F/R primer pair that targets the 16S-23S rRNA IGS region specific to CaLso (2), all 15 diseased samples yielded a band of 383 bp size. After sequencing, 100% homology was noted among tested isolates; therefore, one isolate coded as 1842/20 was chosen as representative and was deposited in NCBI GenBank under Accession number MT948144. BLAST analysis showed 99.70% identity of Serbian carrot isolates with those of the CaLso isolate 80022 originating from celery seed in Slovenia or Italy (Acc. no. KY619977) (3), as well as 99.41% identity with isolate GBBC_Clso_03 from carrot in Belgium (Acc. no. MH734515) and 98.22% identity with the sequence of the CaLso reference strain NZ082226 (Acc. no. EU834130) isolated from tomato in New Zealand (4). In the second PCR, species-specific forward primer LsoF empirically designed at the signature region of the 16S rRNA sequence of CaLso (5) in combination with the universal liberibacter reverse primer OI2c (6) yielded a target of 1163 bp size in all 15 diseased symptomatic carrot samples. Representative isolate 1842/20 was deposited in NCBI GenBank under Acc. no. MW187524. Based on the nucleotide BLAST analysis, the sequence of Serbian carrot isolate showed 100% identity with CaLso strains 16-004 and 16-011 originating from carrot in Finland (Acc. no. MG701014 and MG701015, respectively) and 99.64% identity with CaLso reference strain NZ082226 (Acc. no. EU834130). Five healthy asymptomatic carrot plant samples were negative for the presence of CaLso in both PCR tests employed in this work. To our knowledge, this is the first report of CaLso causing the disease in carrot in Serbia. These results suggest a wider distribution of this pathogen than previously reported in Europe. In 2014, Psyllid Bactericera trigonica (Hemiptera, Triozidae) was described for the first time as a potential vector for CaLso transmission in few localities, including Begec (7). Considering that its vectors are presently unidentified, certain aspects of CaLso genomics, diversity, epidemiology and vector dynamics will be studied further in future investigations.

Antioxidant potential in Stevia rebaudiana callus in response to polyethylene glycol, paclobutrazol and gibberellin treatments.

The study on Stevia callus has the potential to advance the knowledge of antioxidant mechanisms involved in unorganized cells response to drought stress. The effects of polyethylene glycol (PEG; 0 and 4% w/v) in combination with paclobutrazol (PBZ; 0 and 2 mg l-1) and gibberellin (GA; 0 and 2 mg l-1) were studied on Stevia rebaudiana callus. PEG treatment led to an oxidative stress, as indicated by increased H2O2 content whose accumulation was prevented with PBZ and GA treatments. All treatments of PEG, PBZ and GA increased the total antioxidant capacity, with the highest antioxidant power in PBZ and GA treatments without PEG. The activity of superoxide dismutase, catalase and ascorbate peroxidase significantly increased in PEG treatment alone or in combination with PBZ and GA. All treatments of PEG, PBZ and GA significantly increased proteins, amino acids and proline contents, with the highest increase in presence of PBZ in medium culture. In contrary to proline, the activity of pyrroline-5-carboxylate synthetase and proline dehydrogenase did not change in response to any of the treatments. Collectively, our results demonstrated that PBZ and GA increased reactive oxygen species scavenging and osmolytes in PEG-treated calli more than PEG treatment alone to alleviate negative effects of PEG on Stevia calli. These findings will enable us to design effective genetic engineering strategies in callus culture to generate some somaclonal variation that may be useful in enhancing drought resistance in Stevia.

Maize and heat stress: Physiological, genetic, and molecular insights.

Global mean temperature is increasing at a rapid pace due to the rapid emission of greenhouse gases majorly from anthropogenic practices and predicted to rise up to 1.5°C above the pre-industrial level by the year 2050. The warming climate is affecting global crop production by altering biochemical, physiological, and metabolic processes resulting in poor growth, development, and reduced yield. Maize is susceptible to heat stress, particularly at the reproductive and early grain filling stages. Interestingly, heat stress impact on crops is closely regulated by associated environmental covariables such as humidity, vapor pressure deficit, soil moisture content, and solar radiation. Therefore, heat stress tolerance is considered as a complex trait, which requires multiple levels of regulations in plants. Exploring genetic diversity from landraces and wild accessions of maize is a promising approach to identify novel donors, traits, quantitative trait loci (QTLs), and genes, which can be introgressed into the elite cultivars. Indeed, genome wide association studies (GWAS) for mining of potential QTL(s) and dominant gene(s) is a major route of crop improvement. Conversely, mutation breeding is being utilized for generating variation in existing populations with narrow genetic background. Besides breeding approaches, augmented production of heat shock factors (HSFs) and heat shock proteins (HSPs) have been reported in transgenic maize to provide heat stress tolerance. Recent advancements in molecular techniques including clustered regularly interspaced short palindromic repeats (CRISPR) would expedite the process for developing thermotolerant maize genotypes.

Nutritional and Chemical Quality of Maize Hybrids from Different FAO Maturity Groups Developed and Grown in Serbia.

Maize is a globally significant cereal crop, contributing to the production of essential food products and serving as a pivotal resource for diverse industrial applications. This study investigated the proximate analysis of maize hybrids from different FAO maturity groups in Serbia, exploring variations in polyphenols, flavonoids, carotenoids, tocopherols, and fatty acids with the aim of understanding how agroecological conditions influence the nutritional potential of maize hybrids. The results indicate substantial variations in nutritional composition and antioxidant properties among different maturity groups. The levels of total polyphenols varied among FAO groups, indicating that specific hybrids may offer greater health benefits. Flavonoids and carotenoids also showed considerable variation, with implications for nutritional quality. Tocopherol content varied significantly, emphasizing the diversity in antioxidant capacity. Fatty acid analysis revealed high levels of unsaturated fatty acids, particularly linoleic acid, indicating favorable nutritional and industrial properties. The study highlights the importance of considering maturity groups in assessing the nutritional potential of maize hybrids.

Nitrogen Fertilization and Cultivar Interactions Determine Maize Yield and Grain Mineral Composition in Calcareous Soil under Semiarid Conditions.

Identifying the contributions of climate factors and fertilization to maize yield is significant for the assessment of climate change impacts on maize production under semiarid conditions. This experiment was conducted with an overall objective to find how N fertilization and cultivar interactions along with climatic conditions determine the mineral composition and maize yield responses of four divergent maize cultivars grown under eight different fertilization levels. The results showed that element contents were significantly affected by year (Y), cultivar (C), N fertilization, and N × C interaction. The element contents of grains were mainly influenced by N rate or N × C interactions. The results showed that maize yield was significantly affected by year (Y), genotype (G), N fertilization (N), and Y × G × N interaction. These results implied that the maize yield was significantly affected by changes in genotypes and environments. Overall, our findings are a result of the interactions of genetic, environmental, and agronomic management factors. Future studies could evaluate more extreme plant densities, N fertilizer levels, and environments to further enhance our understanding of management effects on the mineral composition and maize yield in calcareous soil.

Physiological, molecular, and environmental insights into plant nitrogen uptake, and metabolism under abiotic stresses.

Nitrogen (N) as an inorganic macronutrient is inevitable for plant growth, development, and biomass production. Many external factors and stresses, such as acidity, alkalinity, salinity, temperature, oxygen, and rainfall, affect N uptake and metabolism in plants. The uptake of ammonium (NH4 +) and nitrate (NO3 -) in plants mainly depends on soil properties. Under the sufficient availability of NO3 - (>1 mM), low-affinity transport system is activated by gene network NRT1, and under low NO3 - availability (<1 mM), high-affinity transport system starts functioning encoded by NRT2 family of genes. Further, under limited N supply due to edaphic and climatic factors, higher expression of the AtNRT2.4 and AtNRT2.5T genes of the NRT2 family occur and are considered as N remobilizing genes. The NH4 + ion is the final form of N assimilated by cells mediated through the key enzymes glutamine synthetase and glutamate synthase. The WRKY1 is a major transcription factor of the N regulation network in plants. However, the transcriptome and metabolite profiles show variations in N assimilation metabolites, including glycine, glutamine, and aspartate, under abiotic stresses. The overexpression of NO3 - transporters (OsNRT2.3a and OsNRT1.1b) can significantly improve the biomass and yield of various crops. Altering the expression levels of genes could be a valuable tool to improve N metabolism under the challenging conditions of soil and environment, such as unfavorable temperature, drought, salinity, heavy metals, and nutrient stress.

Mitigation of salt stress in Indian mustard (Brassica juncea L.) by the application of triacontanol and hydrogen sulfide.

Salinity stress is a well-known abiotic stress that has been shown to have a negative impact on crop growth, production, and soil richness. The current study was intended to ameliorate salt stress in Indian mustard (Brassica juncea L.), keeping in mind the detrimental influence of salt stress. A pot experimentation was executed on B. juncea to examine the efficacy of exogenous application of triacontanol (TRIA) and hydrogen sulfide (H2S) (NaHS donor), either alone or in combination, on growth attributes, metabolites, and antioxidant defense system exposed to salt stress at three distinct concentrations (50, 100 and 150 mM NaCl). Increase in the concentration of oxidative markers (malondialdehyde and hydrogen peroxide) was found which results in inhibited growth of B. juncea. The growth characteristics of plant, such as root and shoot length, fresh and dry weight under salt stress, were improved by foliar application of TRIA (150 µM) and H2S (25 µM) alone as well as in combination. Additionally, salt stress reduced the levels of protein, metabolites (flavonoids, phenolic and anthocyanin), antioxidant enzyme activity including that of ascorbate peroxidase, catalase, polyphenol oxidase and guaiacol peroxidase as well as the level of ascorbic acid and glutathione (non-enzymatic antioxidants). However, application of TRIA and H2S alone or in grouping substantially raised the content of protein, metabolites and antioxidant defense system in plants of B. juncea.

The Development of Novel Functional Corn Flakes Produced from Different Types of Maize (Zea mays L.).

Cereal products, such as flakes and snack items, are frequently consumed as part of everyday diets, encompassing ready-to-eat breakfast cereals, flakes, and snacks. The utilization of extrusion technology is crucial in the manufacturing process of cereal-based flakes or snack products. When it comes to cereal-based flakes or snacks, different types of corn, such as white corn, yellow corn, red corn, and black corn, have garnered attention from scientists, consumers, and experts in the food industry. This paper investigates the simultaneous effects of different types of corn (white corn, yellow corn, red corn, and black corn) addition and different screw speeds (350, 500, 650 rpm) on the physical, technological, and functional properties of flake products. An increasing screw speed had a positive influence on the physical and technological characteristics of corn flakes, while different types of corn had a positive influence on the mineral composition and antioxidant properties. Black corn flour and a screw speed of 350 rpm positively influenced the physical and technological characteristics, mineral composition, and antioxidant properties of flake products, with a best total Z-score analysis of 0.59. Overall, the combination of Tukey's HSD test and PCA enabled a comprehensive analysis of the observed corn products and allowed us to identify satiating and significant differences between attributes and create a classification of the samples based on those differences. Corn flakes from black corn flour on a screw speed of 350 rpm is a new product with good physical-technological and functional properties due to a higher level of antioxidant activity. The last three samples have a significantly higher percentage of free radical inhibition compared with the other samples according to TPC and TFC. This product has the potential to be found on the market as a new product with functional properties.

Integrating genomics and genome editing for orphan crop improvement: a bridge between orphan crops and modern agriculture system.

Domestication of orphan crops could be explored by editing their genomes. Genome editing has a lot of promise for enhancing agricultural output, and there is a lot of interest in furthering breeding in orphan crops, which are sometimes plagued with unwanted traits that resemble wild cousins. Consequently, applying model crop knowledge to orphan crops allows for the rapid generation of targeted allelic diversity and innovative breeding germplasm. We explain how plant breeders could employ genome editing as a novel platform to accelerate the domestication of semi-domesticated or wild plants, resulting in a more diversified base for future food and fodder supplies. This review emphasizes both the practicality of the strategy and the need to invest in research that advances our understanding of plant genomes, genes, and cellular systems. Planting more of these abandoned orphan crops could help alleviate food scarcities in the challenge of future climate crises.

Alleviation of drought stress through foliar application of thiamine in two varieties of pea (Pisum sativum L.).

Drought stress poorly impacts many morphological and physio-biochemical processes in plants. Pea (Pisum sativum L.) plants are highly nutritious crops destined for human consumption; however, their productivity is threatened under drought stress. Thiamine (vitamin B1) is well-known essential micronutrient, acting as a cofactor in key metabolic processes. Therefore, this study was designed to examine the protective effect of foliar application of thiamine (0, 250, and 500 ppm) on two varieties of pea plants under drought stress. Here, we conducted the pot experiment at the Government College Women University, Faisalabad, to investigate the physio-biochemical and morphological traits of two pea varieties (sarsabz and metior) grown under drought stress and thiamine treatment. Drought stress was applied to plants after germination period of 1 month. Results showed that root fresh and dry weight, shoot fresh and dry weight, number of pods, leaf area, total soluble sugars, total phenolics, total protein contents, catalase, peroxidase, and mineral ions were reduced against drought stress. However, the application of thiamine (both 250 and 500 ppm) overcome the stress and also enhances these parameters, and significantly increases the antioxidant activities (catalase and peroxidase). Moreover, the performance of sarsabz was better under control and drought stress conditions than metior variety. In conclusion, the exogenous application of thiamine enabled the plants to withstand drought stress conditions by regulating several physiological and biochemical mechanisms. In agriculture, it is a great latent to alleviate the antagonistic impact of drought stress on crops through the foliar application of thiamine.

Green revolution to genome revolution: driving better resilient crops against environmental instability.

Crop improvement programmes began with traditional breeding practices since the inception of agriculture. Farmers and plant breeders continue to use these strategies for crop improvement due to their broad application in modifying crop genetic compositions. Nonetheless, conventional breeding has significant downsides in regard to effort and time. Crop productivity seems to be hitting a plateau as a consequence of environmental issues and the scarcity of agricultural land. Therefore, continuous pursuit of advancement in crop improvement is essential. Recent technical innovations have resulted in a revolutionary shift in the pattern of breeding methods, leaning further towards molecular approaches. Among the promising approaches, marker-assisted selection, QTL mapping, omics-assisted breeding, genome-wide association studies and genome editing have lately gained prominence. Several governments have progressively relaxed their restrictions relating to genome editing. The present review highlights the evolutionary and revolutionary approaches that have been utilized for crop improvement in a bid to produce climate-resilient crops observing the consequence of climate change. Additionally, it will contribute to the comprehension of plant breeding succession so far. Investing in advanced sequencing technologies and bioinformatics will deepen our understanding of genetic variations and their functional implications, contributing to breakthroughs in crop improvement and biodiversity conservation.

Combining Straw Mulch with Nitrogen Fertilizer Improves Soil and Plant Physio-Chemical Attributes, Physiology, and Yield of Maize in the Semi-Arid Region of China.

Mulching and nitrogen (N) fertilization are the main drivers for sustainable crop production. The sole use of nitrogen fertilizer threatened both the physiology and production of maize in rain-fed areas. Therefore, we proposed that wheat straw mulching with N fertilization would increase maize yield by improving soil fertility, physiology, and nitrogen use efficiency. A two-year field study evaluated the effects of CK (control), N (nitrogen application at 172 kg ha-1), HS (half wheat straw mulch, 2500 kg ha-1), HS+N (half wheat straw, 2500 kg ha-1 plus 172 kg N ha-1), FS (full wheat straw, 5000 kg ha-1), and FS+N (full wheat straw, 5000 kg ha-1 plus 172 kg N ha-1) on maize growth, physiology, and biochemistry. Compared with the control, the FS+N treatment resulted in the increase of 56% photosynthetic efficiency, 9.6% nitrogen use efficiency, 60% nitrogen uptake, 80% soluble sugar, 59% starches, 48% biomass, and 29% grain yield of maize. In addition, the FS+N regime increased 47%, 42%, and 106% of soil organic carbon and available P and N content in comparison with the control. Maize grain and biomass yields were positively correlated with N uptake, photosynthesis, soil organic carbon, and soil available N and P contents. Conclusively, the use of wheat straw at 5000 kg ha-1, along with 172 kg N ha-1, is a promising option for building a sustainable wheat-maize cropping system to achieve optimal crop yield and improved plant and soil health in a semi-arid region of China.

The comparative effects of manganese nanoparticles and their counterparts (bulk and ionic) in Artemisia annua plants via seed priming and foliar application.

The world has experienced an unprecedented boom in nanotechnology. Nanoparticles (NPs) are likely to act as biostimulants in various plants due to having high surface/volume value. However, understanding the actual effect of NPs is essential to discriminate them from other counterparts in terms of being applicable, safe and cost-effective. This study aimed to assay the impact of manganese(III) oxide (Mn2O3)-NPs via seed-priming (SP) and a combination of SP and foliar application (SP+F) on Artemisia. annua performance at several times intervals and comparison with other available manganese (Mn) forms. Our findings indicate that SP with MnSO4 and Mn2O3-NPs stimulates the processes that occur prior to germination and thus reduces the time for radicle emergence. In both applications (i.e., SP and +F), none of the Mn treatments did show adverse phytotoxic on A. annua growth at morpho-physio and biochemical levels except for Mn2O3, which delayed germination and further plant growth, subsequently. Besides, from physio-biochemical data, it can be inferred that the general mechanism mode of action of Mn is mainly attributed to induce the photosynthetic processes, stimulate the superoxide dismutase (SOD) activity, and up-regulation of proline and phenolic compounds. Therefore, our results showed that both enzymatic and non-enzymatic antioxidants could be influenced by the application of Mn treatments in a type-dependent manner. In general, this study revealed that Mn2O3-NPs at the tested condition could be used as biostimulants to improve germination, seedling development and further plant growth. However, they are not as effective as MnSO4 treatments. Nonetheless, these findings can be used to consider and develop Mn2O3-NPs priming in future studies to improve seed germination and seedling quality in plants.