Organic LEDs Based on Bis(8-hydroxyquinoline) Zinc Derivatives with a Styryl Group.

For the first time, organic light-emitting diodes (OLEDs) based on bis(8-hydroxyquinoline) zinc with a styryl group (ZnStq) dispersed in poly(N-vinylcarbazole) matrix (ZnStq_R:PVK, where R = H, Cl, OCH3) were fabricated. The ZnStq_R:PVK films made via the spin-coating method were used as the active layer in these devices. The produced OLEDs showed strong electroluminescence with yellow emissions at 590, 587 and 578 nm for the ZnStq_H:PVK, ZnStq_Cl:PVK and ZnStq_OCH3:PVK, respectively. For all the studied thin films, the main photoluminescence emission bands were observed between 565 and 571 nm. The OLED with the ZnStq_OCH3:PVK layer with a narrow electroluminescence spectrum was found to have sufficient color purity to produce ultra-high-resolution displays with reduced power consumption (full width at half maximum of 59 nm, maximum brightness of 2244 cd/m2 and maximum current efficiency of 1.24 cd/A, with a turn-on voltage of 6.94 V and a threshold voltage of 7.35 V). To characterize the photophysical properties of the active layer, the ZnStq_R:PVK layers samples were additionally deposited on glass and silicon substrates. We found that the obtained results predestine ZnStq_R:PVK layers for use in the lighting industry in the future.

1H-Pyrazolo[3,4-b]quinolines: Synthesis and Properties over 100 Years of Research.

This paper summarises a little over 100 years of research on the synthesis and the photophysical and biological properties of 1H-pyrazolo[3,4-b]quinolines that was published in the years 1911-2021. The main methods of synthesis are described, which include Friedländer condensation, synthesis from anthranilic acid derivatives, multicomponent synthesis and others. The use of this class of compounds as potential fluorescent sensors and biologically active compounds is shown. This review intends to summarize the abovementioned aspects of 1H-pyrazolo[3,4-b]quinoline chemistry. Some of the results that are presented in this publication come from the laboratories of the authors of this review.

Mass Transfer in Osmotic Dehydration of Kiwiberry: Experimental and Mathematical Modelling Studies.

The aim of this study was to analyze the impact of osmotic solutions and temperature on the osmotic dehydration (OD) of two cultivars of kiwiberry. OD was carried out in sucrose, xylitol and maltitol solutions at 30 °C and 50 °C, respectively. The process of osmotic dehydration was described by the means of water loss (WL), solid gain (SG), weight reduction (WR), and water content changes. Moreover, dehydration was described by mathematical models often used in the literature. The highest WL, WR and SG values were observed for samples treated by xylitol and maltitol at 50 °C. The statistical analysis of the mathematical modelling of the process showed that in most cases, the Peleg's equation exhibits better fitting for the experimental data.

Influence of P3HT:PCBM Ratio on Thermal and Transport Properties of Bulk Heterojunction Solar Cells.

The influence of P3HT:PCBM ratio on thermal and transport properties of solar cells were determined by photothermal beam deflection spectrometry, which is advantageous tool for non-destructively study of bulk heterojunction layers of organic solar cells. P3HT:PCBM layers of different P3HT:PCBM ratios were deposited on top of PEDOT:PSS/ITO layers which were included in organic bulk-heterojunction solar cells. The thermal diffusivity, energy gap and charge carrier lifetime were measured at different illumination conditions and with a different P3HT:PCBM ratios. As expected, it was found that the energy band gap depends on the P3HT:PCBM ratio. Thermal diffusivity is decreasing, while charge carrier lifetime is increasing with PCBM concentration. Energy band gap was found to be independent on illumination intensity, while thermal diffusivity was increasing and carrier lifetime was decreasing with illumination intensity. The carrier lifetime exhibits qualitatively similar dependence on the PCBM concentration when compared to the open-circuit voltage of operating solar cells under AM1.5 illumination. BDS and standard I-V measurement yielded comparable results arguing that the former is suitable for characterization of organic solar cells.

Zinc Oxide Films Fabricated via Sol-Gel Method and Dip-Coating Technique-Effect of Sol Aging on Optical Properties, Morphology and Photocatalytic Activity.

Zinc oxide layers on soda-lime glass substrates were fabricated using the sol-gel method and the dip-coating technique. Zinc acetate dihydrate was applied as the precursor, while diethanolamine as the stabilizing agent. This study aimed to determine what effect has the duration of the sol aging process on the properties of fabricated ZnO films. Investigations were carried out with the sol that was aged during the period from 2 to 64 days. The sol was studied using the dynamic light scattering method to determine its distribution of molecule size. The properties of ZnO layers were studied using the following methods: scanning electron microscopy, atomic force microscopy, transmission and reflection spectroscopy in the UV-Vis range, and the goniometric method for determination of the water contact angle. Furthermore, photocatalytic properties of ZnO layers were studied by the observation and quantification of the methylene blue dye degradation in an aqueous solution under UV illumination. Our studies showed that ZnO layers have grain structure, and their physical-chemical properties depend on the duration of aging. The strongest photocatalytic activity was observed for layers produced from the sol that was aged over 30 days. These layers have also the greatest porosity (37.1%) and the largest water contact angle (68.53°). Our studies have also shown that there are two absorption bands in studied ZnO layers, and values of optical energy band gaps determined from positions of maxima in reflectance characteristics are equal to those determined using the Tauc method. Optical energy band gaps of the ZnO layer fabricated from the sol aged over 30 days are EgI = 4.485 eV and EgII = 3.300 eV for the first and second bands, respectively. This layer also showed the highest photocatalytic activity, causing the pollution to degrade 79.5% after 120 min of UV irradiation. We believe that ZnO layers presented here, thanks to their attractive photocatalytic properties, may find application in environmental protection for the degradation of organic pollutants.

Photoinduced charge transfer in push-pull pyrazoline-based chromophores - Relationship between molecular structure and photophysical, photovoltaic properties.

The manuscript describes the effect of molecular structure on the photophysical and photovoltaic properties of the pyrazoline-based donor-branched-π-system-acceptor compounds decorated with two end groups: phenyl or thiophene. Although the absorption to the first singlet excited state is strongly allowed, the emission quantum yield is low in all studied solvents. This behaviour was explained by the existence of two non-radiative deactivation channels: the back electron transfer process, especially operated in polar solvents, and internal conversion realized as the rotation of flexible rotors (cyano, keto phenyl or thiophene). The feasibility of the photoinduced electron transfer process was corroborated by electrochemical, spectroelectrochemical measurements as well as DFT calculations. DFT calculations also support the existence of multiple conformations in the ground state, which differ from one another in terms of charge distribution and the values of ground state dipole moment. Finally, the mechanism of the singlet excited state deactivation of the studied compounds was determined by ultrafast pump-probe measurements. Our studies revealed that charge/electron transfer process may undergo over carbonyl bridge, included in branched π-system. Moreover, the thiophene decorated pyrazoline is characterized by a better photovoltaic power conversion efficiency, while the phenyl-ended pyrazoline can be applied as a viscosity sensor.

Sol-Gel Derived Silica-Titania Waveguide Films for Applications in Evanescent Wave Sensors-Comprehensive Study.

Composite silica-titania waveguide films of refractive index ca. 1.8 are fabricated on glass substrates using a sol-gel method and dip-coating technique. Tetraethyl orthosilicate and tetraethyl orthotitanate with molar ratio 1:1 are precursors. Fabricated waveguides are annealed at 500 °C for 60 min. Their optical properties are studied using ellipsometry and UV-Vis spectrophotometry. Optical losses are determined using the streak method. The material structure and chemical composition, of the silica-titania films are analyzed using transmission electron microscopy (TEM) and electron dispersive spectroscopy (EDS), respectively. The surface morphology was investigated using atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods. The results presented in this work show that the waveguide films are amorphous, and their parameters are stable for over a 13 years. The optical losses depend on their thickness and light polarization. Their lowest values are less than 0.06 dB cm-1. The paper presents the results of theoretical analysis of scattering losses on nanocrystals and pores in the bulk and interfaces of the waveguide film. These results combined with experimental data clearly indicate that light scattering at the interface to a glass substrate is the main source of optical losses. Presented waveguide films are suitable for application in evanescent wave sensors.

Changes in Optical Parameters of SiO2:TiO2 Films Obtained by Sol-Gel Method Observed as a Result of Thermal Treatment.

The research focused on materials having potential applications in technology of planar evanescent wave sensors. Four samples of binary SiO2:TiO2 thin films having different titania content were manufactured through the sol-gel method and dip-coating technique on polished silicon substrates. The samples were subjected to repeated heating/cooling protocols. Simultaneously, their optical parameters were monitored by spectroscopic ellipsometry as they evolved under varying temperature. Subsequent analysis confirmed linear dependence of refractive index on titania content, at least in vis-NIR wavelengths, as well as a low value of the thermal expansion coefficient. It was shown that the thickness of SiO2:TiO2 films decreased as a result of annealing processes, which may be a consequence of reduced porosity.

Mechanical and Combustion Properties of Agglomerates of Wood of Popular Eastern European Species.

The objective of the reported project was to produce wood agglomerates from popular East European species to determine their strength and combustion properties. Closed-die pellets were produced from sawdust of six types of wood common on the East European market: pine, willow, oak, poplar, birch, and beech. The properties of pellets, determined by the type of wood, were influenced by the compaction pressure and the moisture content of the sawdust. The highest average pellet density was obtained for oak sawdust, while the lowest density was obtained for poplar pellets. Expansion of pellets after removing from the die was found to be dependent on the wood species, and as expected, on compaction pressure. The pellet expansion increased after 2 h of conditioning in the laboratory and with an increase in moisture content. The highest and the smallest strength were obtained for oak pellets and for birch sawdust, respectively. The strength of the pellets increased by more than 100% with an increase in the compaction pressure from 60 MPa to 120 MPa. The average strength decreased by 65% with increasing moisture content. For all tested materials, drop resistance remained at a high level, acceptable in industrial practice. The highest calorific value of 18.97 MJ/kg was obtained for pine pellets. The highest ash value of 1.52% was obtained for willow pellets and the lowest value of 0.32% for pine pellets.

High Refractive Index Silica-Titania Films Fabricated via the Sol-Gel Method and Dip-Coating Technique-Physical and Chemical Characterization.

Crack-free binary SiOx:TiOy composite films with the refractive index of ~1.94 at wavelength 632.8 nm were fabricated on soda-lime glass substrates, using the sol-gel method and dip-coating technique. With the use of transmission spectrophotometry and Tauc method, the energy of the optical band gap of 3.6 eV and 4.0 eV were determined for indirect and direct optical allowed transitions, respectively. Using the reflectance spectrophotometry method, optical homogeneity of SiOx:TiOy composite films was confirmed. The complex refractive index determined by spectroscopic ellipsometry confirmed good transmission properties of the developed SiOx:TiOy films in the Vis-NIR spectral range. The surface morphology of the SiOx:TiOy films by atomic force microscopy (AFM) and scanning electron microscopy (SEM) methods demonstrated their high smoothness, with the root mean square roughness at the level of ~0.15 nm. Fourier-transform infrared (FTIR) spectroscopy and Raman spectroscopy were used to investigate the chemical properties of the SiOx:TiOy material. The developed binary composite films SiOx:TiOy demonstrate good waveguide properties, for which optical losses of 1.1 dB/cm and 2.7 dB/cm were determined, for fundamental TM0 and TE0 modes, respectively.

Friction and Shear Properties of Pine Biomass and Pellets.

Knowledge on the mechanical properties of granular biomass is important for the design and efficient operation of equipment used for handling, storage, and processing. Their mechanical properties are used as a measure of material quality. In this study, the mechanical properties of granular biomass obtained from pines (sawdust, shavings, long shavings, and pellets) were determined under a moisture content range of 10-50%. The coefficient of sliding friction µ of four construction materials was determined using a 210-mm-diameter direct shear tester (Jenike's shear box). To measure the shear resistance of the biomass materials (represented as torque T), a prototype vane tester was constructed. The characteristics of shear resistance with respect to time T(t) were determined for material samples under normal pressure p ranging from 5 to 30 kPa and a vane rotation rate of 3 rpm. Measurements were performed for five geometries of the rotor, reflecting typical deformation conditions encountered in the processing of granular biomass. The coefficient of sliding friction was found to be affected by the type of material, moisture content, and normal compressive pressure. Depending on the biomass material, the highest µ, which ranged from 0.50 to 0.62, was obtained for black steel, whereas the lowest µ, which ranged from 0.27 to 0.52, was obtained for aluminum. The lowest coefficient of sliding friction was observed for dry materials and high normal pressure. The torque T was observed to be affected by the rotor shape, material, normal pressure, and moisture content. The parameters presented provide information useful for the design of transport equipment and processing of granular wood biomass.

Characteristics of Instrumental Methods to Describe and Assess the Recrystallization Process in Ice Cream Systems.

Methods of testing and describing the recrystallization process in ice cream systems were characterized. The scope of this study included a description of the recrystallization process and a description and comparison of the following methods: microscopy and image analysis, focused beam reflectance measurement (FBRM), oscillation thermo-rheometry (OTR), nuclear magnetic resonance (NMR), splat-cooling assay, and X-ray microtomography (micro-CT). All the methods presented were suitable for characterization of the recrystallization process, although they provide different types of information, and they should be individually matched to the characteristics of the tested product.

The effect of vegetable and spice addition on the acrylamide content and antioxidant activity of innovative cereal products.

The aim of the work was to assess the impact of vegetable and spice addition on the acrylamide content and antioxidant activity of extruded cereal crisps. The foods were based on grain ingredients, such as brown rice, whole grain flour, wheat bran, with different vegetables. Products from one group contained green vegetables, such as broccoli and zucchini; garlic was included as a flavour additive (0.75-1.50%). The second group of crisps consisted of similar cereal ingredients with pumpkin and cinnamon; additionally ginger was included as a flavour additive (0.75-1.50%). The results indicate that the production of a new, innovative product with appropriate nutritional value and acceptable quality is a complex process. The production process significantly changed the nutritional value of the product. The content of acrylamide in zucchini and broccoli crisps was relatively low; ranging from 78 to 86 µg/kg of product. The addition of garlic did not significantly affect the acrylamide content in the final product. For cereal-pumpkin crisps, the acrylamide content was 7 times higher in comparison with zucchini and broccoli products. The acrylamide content in pumpkin and ginger crisps exceeded the benchmark level. The antioxidant activity of the pumpkin product was significantly higher (p < 0.05) than for crisps with green vegetables.

Active polyphenolic compounds, nutrient contents and antioxidant capacity of extruded fish feed containing purple coneflower (Echinacea purpurea (L.) Moench.).

The growth of fish is directly dependent on feed composition and quality. Medicinal plants can be added to fish feed as adjuvant therapy for the prevention of fish diseases. The purple coneflower (Echinacea purpurea (L.) Moench.) has been reported to have multiple biological effects, including immunomodulatory and antioxidant activity. The most active compounds of E. purpurea are polyphenols - caffeic acid derivatives: caftaric acid, chlorogenic acid, cynarin, echinacoside and cichoric acid. Due to a relatively limited number of studies on the use of the purple coneflower as a nutritional supplement for fish feeding, extruded fish feed with addition of Echinacea roots was produced. In the feed total phenolic content, selected polyphenol contents, the energetic value, nutrient contents and antioxidant capacity were examined. The results indicate that fish feed with addition of the Echinacea has a great potential to be a good source of natural radical scavengers, for example polyphenols, and nutritive ingredients. Antioxidant properties of feed were well correlated with the coneflower content. The study findings confirmed that high-temperature extrusion-cooking process does not deactivate phenolic antioxidant compounds, which are present both in the Echinacea roots and in the final product. Fish feed with addition of E. purpurea can be used as a nutritional supplement in the prevention of fish diseases caused by oxidative stress.