A cytosolic bifunctional geranyl/farnesyl diphosphate synthase provides MVA-derived GPP for geraniol biosynthesis in rose flowers.

Geraniol derived from essential oils of various plant species is widely used in the cosmetic and perfume industries. It is also an essential trait of the pleasant smell of rose flowers. In contrast to other monoterpenes which are produced in plastids via the methyl erythritol phosphate pathway, geraniol biosynthesis in roses relies on cytosolic NUDX1 hydrolase which dephosphorylates geranyl diphosphate (GPP). However, the metabolic origin of cytosolic GPP remains unknown. By feeding Rosa chinensis "Old Blush" flowers with pathway-specific precursors and inhibitors, combined with metabolic profiling and functional characterization of enzymes in vitro and in planta, we show that geraniol is synthesized through the cytosolic mevalonate (MVA) pathway by a bifunctional geranyl/farnesyl diphosphate synthase, RcG/FPPS1, producing both GPP and farnesyl diphosphate (FPP). The downregulation and overexpression of RcG/FPPS1 in rose petals affected not only geraniol and germacrene D emissions but also dihydro-ß-ionol, the latter due to metabolic cross talk of RcG/FPPS1-dependent isoprenoid intermediates trafficking from the cytosol to plastids. Phylogenetic analysis together with functional characterization of G/FPPS orthologs revealed that the G/FPPS activity is conserved among Rosaceae species. Site-directed mutagenesis and molecular dynamic simulations enabled to identify two conserved amino acids that evolved from ancestral FPPSs and contribute to GPP/FPP product specificity. Overall, this study elucidates the origin of the cytosolic GPP for NUDX1-dependent geraniol production, provides insights into the emergence of the RcG/FPPS1 GPPS activity from the ancestral FPPSs, and shows that RcG/FPPS1 plays a key role in the biosynthesis of volatile terpenoid compounds in rose flowers.

Frankia alni Carbonic Anhydrase Regulates Cytoplasmic pH of Nitrogen-Fixing Vesicles.

A phyloprofile of Frankia genomes was carried out to identify those genes present in symbiotic strains of clusters 1, 1c, 2 and 3 and absent in non-infective strains of cluster 4. At a threshold of 50% AA identity, 108 genes were retrieved. Among these were known symbiosis-associated genes such as nif (nitrogenase), and genes which are not know as symbiosis-associated genes such as can (carbonic anhydrase, CAN). The role of CAN, which supplies carbonate ions necessary for carboxylases and acidifies the cytoplasm, was thus analyzed by staining cells with pH-responsive dyes; assaying for CO2 levels in N-fixing propionate-fed cells (that require a propionate-CoA carboxylase to yield succinate-CoA), fumarate-fed cells and N-replete propionate-fed cells; conducting proteomics on N-fixing fumarate and propionate-fed cells and direct measurement of organic acids in nodules and in roots. The interiors of both in vitro and nodular vesicles were found to be at a lower pH than that of hyphae. CO2 levels in N2-fixing propionate-fed cultures were lower than in N-replete ones. Proteomics of propionate-fed cells showed carbamoyl-phosphate synthase (CPS) as the most overabundant enzyme relative to fumarate-fed cells. CPS combines carbonate and ammonium in the first step of the citrulline pathway, something which would help manage acidity and NH4+. Nodules were found to have sizeable amounts of pyruvate and acetate in addition to TCA intermediates. This points to CAN reducing the vesicles' pH to prevent the escape of NH3 and to control ammonium assimilation by GS and GOGAT, two enzymes that work in different ways in vesicles and hyphae. Genes with related functions (carboxylases, biotin operon and citrulline-aspartate ligase) appear to have undergone decay in non-symbiotic lineages.

Authentication of Iranian Saffron (Crocus sativus) Using Stable Isotopes δ13C and δ2H and Metabolites Quantification.

Saffron is a very high value-added ingredient used in the food supplement market and contains a high level of safranal. Adding synthetic safranal to saffron, which is significantly cheaper, and falsifying the origin of saffron may represent recurrent fraud. Saffron from different countries was analyzed to determine the stable isotope ratios δ13C and δ2H from safranal by gas chromatography coupled with isotope-ratio mass spectrometry (GC-C/P-IRMS) and the concentration of saffron metabolites with ultra-high performance liquid chromatography coupled with diode array detector (UHPLC-DAD). The isotopic analysis highlighted a higher ratio of δ2H in synthetic safranal than in natural safranal; the mean values were 36‱ (+/- 40) and -210‱ (+/- 35), respectively. The δ13C between Iranian, Spanish and other saffron was significantly different and represents median values of -28.62‱, -30.12‱ and -30.70‱, respectively. Moreover, linear and quadratic discriminant analyses (LDA and QDA) were computed using the two isotope ratios of safranal and the saffron metabolites. A first QDA showed that trans-crocetin and the δ13C of safranal, picrocrocin, and crocin C3 concentrations clearly differentiated Iranian saffron from other origins. A second model identified δ13C, trans-crocetin, crocin C2, crocin C3, and picrocrocin as good predictors to discriminate saffron samples from Iran, Spain, or other origins, with a total ability score classification matrix of 100% and a prediction matrix of 82.5%. This combined approach may be a useful tool to authenticate the origin of unknown saffron.

Determination of surfactant bio-sourced origin by isotope-ratio mass spectrometry.

RATIONALE: To develop more eco-friendly laundry detergents, renewable surfactants synthesized from vegetal sources are increasingly being used. In a more stringent regulation context, the determination of bio-sourced surfactant origin thus appears essential to assess the claims of detergent manufacturers. Radiocarbon determination, the standard method for the analysis of bio-sourced materials, is an expensive technique, so there is a need for a cheaper method. METHODS: Here, the use of an elemental analyzer linked to isotope-ratio mass spectrometry (EA/IRMS) is evaluated as an alternative approach to the official method. The δ(18) O, δ(13) C and δ(2) H isotope-ratio values were determined to investigate the bio-sourced origin of surfactant raw materials and mixtures. RESULTS: A sample library of 26 commercial surfactants representative of detergent raw materials was first analyzed by EA/IRMS. The δ(18) O, δ(13) C and δ(2) H values allowed discrimination of synthetic and bio-sourced surfactants. Moreover, in this latter group, C4 plant-derived surfactants were distinguished by their δ(13) C values. Binary and ternary mixtures made of synthetic and bio-sourced surfactants were also analyzed and indicated a linear relationship between mixture isotope-ratio values and surfactant proportions. CONCLUSIONS: IRMS represents a viable alternative to radiocarbon determination for the evaluation of surfactant bio-sourced origin. It is a faster and cheaper technique, allowing discrimination of petroleum- and biomass-derived surfactants and identification of their carbon sources (C4 or C3 plants).

δ18O compound-specific stable isotope assessment: An advanced analytical strategy for sophisticated adulterations detection in essential oils - Application to spearmint, cinnamon, and bitter almond essential oils authentication.

Natural plant extracts are primarily used as raw materials in the cosmetic and perfumery industry. However, adulterations with petrochemical products are occurring in the market, leading to non-100% natural products. Several analytical techniques such as impurity detection or enantioselective ratio assessments have been previously described as good indicators to detect any addition of synthetic products, but these techniques are ineffective with novel type of synthetic pathways such as semisynthesis. In order to improve authentication, development of advanced analytical strategies such as δ18O stable isotopic ratios assessment was tested on spearmint, cinnamon and bitter almond essential oils major metabolites (carvone, (E)-cinnamaldehyde, and benzaldehyde). Natural δ18O mean values (δ18OCarvone = 18.4‰; δ18OCinnamaldehyde = 13.9‰; δ18OBenzaldehyde = 16.5‰) were found to be higher than semisynthetic origin for the 3 studied molecules (δ18OCarvone = 9.2‰; δ18OCinnamaldehyde = 8.8‰; δ18OBenzaldehyde = 10.9‰). These measurements proved to be efficient to discriminate natural and semisynthetic origins of these components and therefore potentially lead to a novel way to authenticate natural products.

Determination of enantiomeric and stable isotope ratio fingerprints of active secondary metabolites in neroli (Citrus aurantium L.) essential oils for authentication by multidimensional gas chromatography and GC-C/P-IRMS.

Neroli essential oil (EO), extracted from bitter orange blossoms, is one of the most expensive natural products on the market due to its poor yield and its use in fragrance compositions, such as cologne. Multiple adulterations of neroli EO are found on the market, and several authentication strategies, such as enantioselective gas chromatography (GC) and isotope ratio mass spectrometry (IRMS), have been developed in the last few years. However, neroli EO adulteration is becoming increasingly sophisticated, and analytical improvements are needed to increase precision. Enantiomeric and compound-specific isotopic profiling of numerous metabolites using multidimensional GC and GC-C/P-IRMS was carried out. These analyses proved to be efficient for geographical tracing, especially to distinguish neroli EO of Egyptian origin. In addition, δ2H values and enantioselective ratios can identify an addition of 10% of petitgrain EO. These results demonstrate that enantioselective and stable isotopic metabolite fingerprint determination is currently a necessity to control EOs.

Simultaneous CO2 capture and metal purification from waste streams using triple-level dynamic combinatorial chemistry.

A reduction in CO2 emissions is required to mitigate global warming. Post-combustion carbon capture is one of the most developed technologies that has the potential to meet this goal, but its cost prevents its widespread use. A different approach would be to use CO2 directly as it is captured, before it is stored. Here we explore spontaneous CO2 fixation by industrial polyamines as a strategy to generate dynamic libraries of ligands for metal separation and recovery. We identify the CO2 loadings and solvents promoting the optimal precipitation of each metal from the dynamic libraries of complexes. We demonstrate the separation of lanthanum and nickel using the exhaust gas of an internal combustion engine vehicle, and show that the three metal constituents of the La2Ni9Co alloys used to manufacture the batteries of electric vehicles can be separated and recovered by successive CO2-induced selective precipitations. Beyond the concept of CO2-sourced multi-level dynamic coordination chemistry, this study provides a potential framework for integrated CO2 capture and use through sustainable processes.

Simultaneous δ2 H and δ18 O analyses of water inclusions in halite with off-axis integrated cavity output spectroscopy.

Stable isotope compositions of ancient halite fluid inclusions have been recognized to be valuable tools for reconstructing past environments. Nevertheless, in order to better understand the genesis of halite deposits, it could be of great interest to combine both δ2 H and δ18 O measurements of the water trapped as inclusions in the defects of the mineral lattice. We developed a method combining off-axis integrated cavity output spectroscopy (OA-ICOS) connected on line with a modified elemental analyzer (EA-OA-ICOS) to perform those measurements. The first step was to test the method with synthetic halite crystals precipitated in the laboratory from isotopically calibrated waters. Water isotopic signatures have been measured with conventional techniques, equilibration for δ18 O and chromium reduction for δ2 H. Then, we modified and optimized a conventional EA to connect it online with an OA-ICOS instrument for H2 O measurements. The technique is first evaluated for calibrated free water samples. The technique is also evaluated for salt matrix effect, accuracy, and linearity for both isotopic signatures. Then, the technique is used to measure simultaneously δ2 H and δ18 O values of halite water inclusions precipitated from the evaporation experiments. Data generated with this new technique appeared to be comparable with those inferred from prior off-line technique studies. The advantages offered by the OA-ICOS technique are the simultaneous acquisition of both isotopic ratios and the substantial reduction of data acquisition time and sample aliquot size. Natural halite samples have been analyzed with this method. Natural halite samples as old as Precambrian have also been analyzed with this method.

Priority substances in accumulated sediments in a stormwater detention basin from an industrial area.

One of the most adopted solutions in developed countries to manage stormwater is detention/retention basins which generate large quantities of sediments that have to be removed regularly. In order to manage them properly, accurate data are needed about their physical and chemical characteristics, particularly on micropollutant concentrations and their associated risk. This work consisted in a two-year sampling of dry sediments from a detention-settling basin. Priority substances, including pesticides, polybrominated diphenyl ethers (PBDE), alkylphenols and bisphenol A (BPA), were monitored. Different sites in the basin bottom were sampled in order to investigate spatial distribution of the contamination. Results show that the increase of the sediment thickness in the basin was heterogeneous with a maximum of 15 cm after two years. Pesticides and PBDE were, if detected, mainly found in low concentrations from 2 ng/g to 286 ng/g. Conversely, alkylphenols and bisphenol A were always quantified at concentrations varying from 6 ng/g to 3400 ng/g. These high levels suggest that these sediments should be managed with precautions. Spatial heterogeneity of alkylphenol ethoxylates and BPA concentrations was observed, with higher contamination of alkylphenol ethoxylates in anaerobic zones and BPA levels correlated with total organic carbon and in a lesser extent to fine particles.

IRMS to study a common cocaine cutting agent: phenacetin.

Phenacetin is a pharmaceutical closely related to acetaminophen that has been banned in France for a long time due to its nephritic and carcinogenic adverse effects. It frequently appears in cocaine seizures as a cutting agent. Following both sanitary and intelligence motivations, this molecule was chosen for this study, and stable isotopes seemed to be the most appropriate tool. A total of 228 seized samples were collected over a 6-year period, and 8 standards of known origin were purchased. They were submitted to gas chromatography (GC) or elemental analysis - isotope ratio mass spectrometry (EA-IRMS) measurements, depending on their complexity. Stable isotope ratios of carbon, hydrogen, and nitrogen for a part of the sample set, were acquired. The isotopic values of phenacetin standards acquired from various providers located worldwide are quite spread, which indicates that stable isotopes could be used to discriminate manufacturers. However, the measured values of most of the seized samples are concentrated in a narrow range, tending to demonstrate that phenacetin is smuggled from a single source or similar ones. Consequently, stable isotopes could only be used to exclude that several samples come from a common source. Copyright © 2016 John Wiley & Sons, Ltd.