Mapping the Initial Stages of a Protective Pathway that Enhances Catalytic Turnover by a Lytic Polysaccharide Monooxygenase.

Oxygenase and peroxygenase enzymes generate intermediates at their active sites which bring about the controlled functionalization of inert C-H bonds in substrates, such as in the enzymatic conversion of methane to methanol. To be viable catalysts, however, these enzymes must also prevent oxidative damage to essential active site residues, which can occur during both coupled and uncoupled turnover. Herein, we use a combination of stopped-flow spectroscopy, targeted mutagenesis, TD-DFT calculations, high-energy resolution fluorescence detection X-ray absorption spectroscopy, and electron paramagnetic resonance spectroscopy to study two transient intermediates that together form a protective pathway built into the active sites of copper-dependent lytic polysaccharide monooxygenases (LPMOs). First, a transient high-valent species is generated at the copper histidine brace active site following treatment of the LPMO with either hydrogen peroxide or peroxyacids in the absence of substrate. This intermediate, which we propose to be a CuII-(histidyl radical), then reacts with a nearby tyrosine residue in an intersystem-crossing reaction to give a ferromagnetically coupled (S = 1) CuII-tyrosyl radical pair, thereby restoring the histidine brace active site to its resting state and allowing it to re-enter the catalytic cycle through reduction. This process gives the enzyme the capacity to minimize damage to the active site histidine residues "on the fly" to increase the total turnover number prior to enzyme deactivation, highlighting how oxidative enzymes are evolved to protect themselves from deleterious side reactions during uncoupled turnover.

Spectrophotometric and Fluorimetric High-Throughput Assays for Phenolic Acid Decarboxylase.

Biocatalytic decarboxylation of hydroxycinnamic acids yields phenolic styrenes, which are important precursors for antioxidants, epoxy coatings, adhesives and other polymeric materials. Bacillus subtilis decarboxylase (BsPAD) is a cofactor-independent enzyme that catalyzes the cleavage of carbon dioxide from p-coumaric-, caffeic-, and ferulic acid with high catalytic efficiency. Real-time spectroscopic assays for decarboxylase reactions remove the necessity of extensive sample workup, which is required for HPLC, mass spectrometry, gas chromatography, or NMR methods. This work presents two robust and sensitive assays based on photometry and fluorimetry that allow decarboxylation reactions to be followed with high sensitivity while avoiding product extraction and long analysis times. Optimized assay procedures were used to measure BsPAD activity in cell lysates and to determine the kinetic constants (KM and Vmax ) of the purified enzyme for p-coumaric-, caffeic- and ferulic acid. Substrate inhibition was shown for caffeic acid.

Application of Causality Modelling for Prediction of Molecular Properties for Textile Dyes Degradation by LPMO.

The textile industry is one of the largest water-polluting industries in the world. Due to an increased application of chromophores and a more frequent presence in wastewaters, the need for an ecologically favorable dye degradation process emerged. To predict the decolorization rate of textile dyes with Lytic polysaccharide monooxygenase (LPMO), we developed, validated, and utilized the molecular descriptor structural causality model (SCM) based on the decision tree algorithm (DTM). Combining mathematical models and theories with decolorization experiments, we have elucidated the most important molecular properties of the dyes and confirm the accuracy of SCM model results. Besides the potential utilization of the developed model in the treatment of textile dye-containing wastewater, the model is a good base for the prediction of the molecular properties of the molecule. This is important for selecting chromophores as the reagents in determining LPMO activities. Dyes with azo- or triarylmethane groups are good candidates for colorimetric LPMO assays and the determination of LPMO activity. An adequate methodology for the LPMO activity determination is an important step in the characterization of LPMO properties. Therefore, the SCM/DTM model validated with the 59 dyes molecules is a powerful tool in the selection of adequate chromophores as reagents in the LPMO activity determination and it could reduce experimentation in the screening experiments.

Active-site copper reduction promotes substrate binding of fungal lytic polysaccharide monooxygenase and reduces stability.

Lytic polysaccharide monooxygenases (LPMOs) are a class of copper-containing enzymes that oxidatively degrade insoluble plant polysaccharides and soluble oligosaccharides. Upon reductive activation, they cleave the substrate and promote biomass degradation by hydrolytic enzymes. In this study, we employed LPMO9C from Neurospora crassa, which is active toward cellulose and soluble ß-glucans, to study the enzyme-substrate interaction and thermal stability. Binding studies showed that the reduction of the mononuclear active-site copper by ascorbic acid increased the affinity and the maximum binding capacity of LPMO for cellulose. The reduced redox state of the active-site copper and not the subsequent formation of the activated oxygen species increased the affinity toward cellulose. The lower affinity of oxidized LPMO could support its desorption after catalysis and allow hydrolases to access the cleavage site. It also suggests that the copper reduction is not necessarily performed in the substrate-bound state of LPMO. Differential scanning fluorimetry showed a stabilizing effect of the substrates cellulose and xyloglucan on the apparent transition midpoint temperature of the reduced, catalytically active enzyme. Oxidative auto-inactivation and destabilization were observed in the absence of a suitable substrate. Our data reveal the determinants of LPMO stability under turnover and non-turnover conditions and indicate that the reduction of the active-site copper initiates substrate binding.

Molecular and catalytic properties of fungal extracellular cellobiose dehydrogenase produced in prokaryotic and eukaryotic expression systems.

BACKGROUND: Cellobiose dehydrogenase (CDH) is an extracellular enzyme produced by lignocellulolytic fungi. cdh gene expression is high in cellulose containing media, but relatively low CDH concentrations are found in the supernatant of fungal cultures due to strong binding to cellulose. Therefore, heterologous expression of CDH in Pichia pastoris was employed in the last 15 years, but the obtained enzymes were over glycosylated and had a reduced specific activity. RESULTS: We compare the well-established CDH expression host P. pastoris with the less frequently used hosts Escherichia coli, Aspergillus niger, and Trichoderma reesei. The study evaluates the produced quantity and protein homogeneity of Corynascus thermophilus CDH in the culture supernatants, the purification, and finally compares the enzymes in regard to cofactor loading, glycosylation, catalytic constants and thermostability. CONCLUSIONS: Whereas E. coli could only express the catalytic dehydrogenase domain of CDH, all eukaryotic hosts could express full length CDH including the cytochrome domain. The CDH produced by T. reesei was most similar to the CDH originally isolated from the fungus C. thermophilus in regard to glycosylation, cofactor loading and catalytic constants. Under the tested experimental conditions the fungal expression hosts produce CDH of superior quality and uniformity compared to P. pastoris.

Characterization of three pyranose dehydrogenase isoforms from the litter-decomposing basidiomycete Leucoagaricus meleagris (syn. Agaricus meleagris).

Multigenicity is commonly found in fungal enzyme systems, with the purpose of functional compensation upon deficiency of one of its members or leading to enzyme isoforms with new functionalities through gene diversification. Three genes of the flavin-dependent glucose-methanol-choline (GMC) oxidoreductase pyranose dehydrogenase (AmPDH) were previously identified in the litter-degrading fungus Agaricus (Leucoagaricus) meleagris, of which only AmPDH1 was successfully expressed and characterized. The aim of this work was to study the biophysical and biochemical properties of AmPDH2 and AmPDH3 and compare them with those of AmPDH1. AmPDH1, AmPDH2 and AmPDH3 showed negligible oxygen reactivity and possess a covalently tethered FAD cofactor. All three isoforms can oxidise a range of different monosaccarides and oligosaccharides including glucose, mannose, galactose and xylose, which are the main constituent sugars of cellulose and hemicelluloses, and judging from the apparent steady-state kinetics determined for these sugars, the three isoforms do not show significant differences pertaining to their reaction with sugar substrates. They oxidize glucose both at C2 and C3 and upon prolonged reaction C2 and C3 double-oxidized glucose is obtained, confirming that the A. meleagris genes pdh2 (AY753308.1) and pdh3 (DQ117577.1) indeed encode CAZy class AA3_2 pyranose dehydrogenases. While reactivity with electron donor substrates was comparable for the three AmPDH isoforms, their kinetic properties differed significantly for the model electron acceptor substrates tested, a radical (the 2,2'-azino-bis[3-ethylbenzothiazoline-6-sulphonic acid] cation radical), a quinone (benzoquinone) and a complexed iron ion (the ferricenium ion). Thus, a possible explanation for this PDH multiplicity in A. meleagris could be that different isoforms react preferentially with structurally different electron acceptors in vivo.

Cellulose surface degradation by a lytic polysaccharide monooxygenase and its effect on cellulase hydrolytic efficiency.

Lytic polysaccharide monooxygenase (LPMO) represents a unique principle of oxidative degradation of recalcitrant insoluble polysaccharides. Used in combination with hydrolytic enzymes, LPMO appears to constitute a significant factor of the efficiency of enzymatic biomass depolymerization. LPMO activity on different cellulose substrates has been shown from the slow release of oxidized oligosaccharides into solution, but an immediate and direct demonstration of the enzyme action on the cellulose surface is lacking. Specificity of LPMO for degrading ordered crystalline and unordered amorphous cellulose material of the substrate surface is also unknown. We show by fluorescence dye adsorption analyzed with confocal laser scanning microscopy that a LPMO (from Neurospora crassa) introduces carboxyl groups primarily in surface-exposed crystalline areas of the cellulosic substrate. Using time-resolved in situ atomic force microscopy we further demonstrate that cellulose nano-fibrils exposed on the surface are degraded into shorter and thinner insoluble fragments. Also using atomic force microscopy, we show that prior action of LPMO enables cellulases to attack otherwise highly resistant crystalline substrate areas and that it promotes an overall faster and more complete surface degradation. Overall, this study reveals key characteristics of LPMO action on the cellulose surface and suggests the effects of substrate morphology on the synergy between LPMO and hydrolytic enzymes in cellulose depolymerization.

A C4-oxidizing lytic polysaccharide monooxygenase cleaving both cellulose and cello-oligosaccharides.

Lignocellulosic biomass is a renewable resource that significantly can substitute fossil resources for the production of fuels, chemicals, and materials. Efficient saccharification of this biomass to fermentable sugars will be a key technology in future biorefineries. Traditionally, saccharification was thought to be accomplished by mixtures of hydrolytic enzymes. However, recently it has been shown that lytic polysaccharide monooxygenases (LPMOs) contribute to this process by catalyzing oxidative cleavage of insoluble polysaccharides utilizing a mechanism involving molecular oxygen and an electron donor. These enzymes thus represent novel tools for the saccharification of plant biomass. Most characterized LPMOs, including all reported bacterial LPMOs, form aldonic acids, i.e., products oxidized in the C1 position of the terminal sugar. Oxidation at other positions has been observed, and there has been some debate concerning the nature of this position (C4 or C6). In this study, we have characterized an LPMO from Neurospora crassa (NcLPMO9C; also known as NCU02916 and NcGH61-3). Remarkably, and in contrast to all previously characterized LPMOs, which are active only on polysaccharides, NcLPMO9C is able to cleave soluble cello-oligosaccharides as short as a tetramer, a property that allowed detailed product analysis. Using mass spectrometry and NMR, we show that the cello-oligosaccharide products released by this enzyme contain a C4 gemdiol/keto group at the nonreducing end.

UDP-sulfoquinovose formation by Sulfolobus acidocaldarius.

The UDP-sulfoquinovose synthase Agl3 from Sulfolobus acidocaldarius converts UDP-D-glucose and sulfite to UDP-sulfoquinovose, the activated form of sulfoquinovose required for its incorporation into glycoconjugates. Based on the amino acid sequence, Agl3 belongs to the short-chain dehydrogenase/reductase enzyme superfamily, together with SQD1 from Arabidopsis thaliana, the only UDP-sulfoquinovose synthase with known crystal structure. By comparison of sequence and structure of Agl3 and SQD1, putative catalytic amino acids of Agl3 were selected for mutational analysis. The obtained data suggest for Agl3 a modified dehydratase reaction mechanism. We propose that in vitro biosynthesis of UDP-sulfoquinovose occurs through an NAD(+)-dependent oxidation/dehydration/enolization/sulfite addition process. In the absence of a sulfur donor, UDP-D-glucose is converted via UDP-4-keto-D-glucose to UDP-D-glucose-5,6-ene, the structure of which was determined by (1)H and (13)C-NMR spectroscopy. During the redox reaction the cofactor remains tightly bound to Agl3 and participates in the reaction in a concentration-dependent manner. For the first time, the rapid initial electron transfer between UDP-D-glucose and NAD(+) could be monitored in a UDP-sulfoquinovose synthase. Deuterium labeling confirmed that dehydration of UDP-D-glucose occurs only from the enol form of UDP-4-keto-glucose. The obtained functional data are compared with those from other UDP-sulfoquinovose synthases. A divergent evolution of Agl3 from S. acidocaldarius is suggested.

Active roles of lytic polysaccharide monooxygenases in human pathogenicity.

Lytic polysaccharide monooxygenases (LPMOs) are redox enzymes widely studied for their involvement in microbial and fungal biomass degradation. The catalytic versatility of these enzymes is demonstrated by the recent discovery of LPMOs in arthropods, viruses, insects and ferns, where they fulfill diverse functions beyond biomass conversion. This mini-review puts a spotlight on a recently recognized aspect of LPMOs: their role in infectious processes in human pathogens. It discusses the occurrence and potential biological mechanisms of LPMOs associated with human pathogens and provides an outlook on future avenues in this emerging and exciting research field.

Stability Increase of Phenolic Acid Decarboxylase by a Combination of Protein and Solvent Engineering Unlocks Applications at Elevated Temperatures.

Enzymatic decarboxylation of biobased hydroxycinnamic acids gives access to phenolic styrenes for adhesive production. Phenolic acid decarboxylases are proficient enzymes that have been applied in aqueous systems, organic solvents, biphasic systems, and deep eutectic solvents, which makes stability a key feature. Stabilization of the enzyme would increase the total turnover number and thus reduce the energy consumption and waste accumulation associated with biocatalyst production. In this study, we used ancestral sequence reconstruction to generate thermostable decarboxylases. Investigation of a set of 16 ancestors resulted in the identification of a variant with an unfolding temperature of 78.1 °C and a half-life time of 45 h at 60 °C. Crystal structures were determined for three selected ancestors. Structural attributes were calculated to fit different regression models for predicting the thermal stability of variants that have not yet been experimentally explored. The models rely on hydrophobic clusters, salt bridges, hydrogen bonds, and surface properties and can identify more stable proteins out of a pool of candidates. Further stabilization was achieved by the application of mixtures of natural deep eutectic solvents and buffers. Our approach is a straightforward option for enhancing the industrial application of the decarboxylation process.

A Cold-Active Flavin-Dependent Monooxygenase from Janthinobacterium svalbardensis Unlocks Applications of Baeyer-Villiger Monooxygenases at Low Temperature.

Cold-active enzymes maintain a large part of their optimal activity at low temperatures. Therefore, they can be used to avoid side reactions and preserve heat-sensitive compounds. Baeyer-Villiger monooxygenases (BVMO) utilize molecular oxygen as a co-substrate to catalyze reactions widely employed for steroid, agrochemical, antibiotic, and pheromone production. Oxygen has been described as the rate-limiting factor for some BVMO applications, thereby hindering their efficient utilization. Considering that oxygen solubility in water increases by 40% when the temperature is decreased from 30 to 10 °C, we set out to identify and characterize a cold-active BVMO. Using genome mining in the Antarctic organism Janthinobacterium svalbardensis, a cold-active type II flavin-dependent monooxygenase (FMO) was discovered. The enzyme shows promiscuity toward NADH and NADPH and high activity between 5 and 25 °C. The enzyme catalyzes the monooxygenation and sulfoxidation of a wide range of ketones and thioesters. The high enantioselectivity in the oxidation of norcamphor (eeS = 56%, eeP > 99%, E > 200) demonstrates that the generally higher flexibility observed in the active sites of cold-active enzymes, which compensates for the lower motion at cold temperatures, does not necessarily reduce the selectivity of these enzymes. To gain a better understanding of the unique mechanistic features of type II FMOs, we determined the structure of the dimeric enzyme at 2.5 Å resolution. While the unusual N-terminal domain has been related to the catalytic properties of type II FMOs, the structure shows a SnoaL-like N-terminal domain that is not interacting directly with the active site. The active site of the enzyme is accessible only through a tunnel, with Tyr-458, Asp-217, and His-216 as catalytic residues, a combination not observed before in FMOs and BVMOs.

Characterization of the two Neurospora crassa cellobiose dehydrogenases and their connection to oxidative cellulose degradation.

The genome of Neurospora crassa encodes two different cellobiose dehydrogenases (CDHs) with a sequence identity of only 53%. So far, only CDH IIA, which is induced during growth on cellulose and features a C-terminal carbohydrate binding module (CBM), was detected in the secretome of N. crassa and preliminarily characterized. CDH IIB is not significantly upregulated during growth on cellulosic material and lacks a CBM. Since CDH IIB could not be identified in the secretome, both CDHs were recombinantly produced in Pichia pastoris. With the cytochrome domain-dependent one-electron acceptor cytochrome c, CDH IIA has a narrower and more acidic pH optimum than CDH IIB. Interestingly, the catalytic efficiencies of both CDHs for carbohydrates are rather similar, but CDH IIA exhibits 4- to 5-times-higher apparent catalytic constants (k(cat) and K(m) values) than CDH IIB for most tested carbohydrates. A third major difference is the 65-mV-lower redox potential of the heme b cofactor in the cytochrome domain of CDH IIA than CDH IIB. To study the interaction with a member of the glycoside hydrolase 61 family, the copper-dependent polysaccharide monooxygenase GH61-3 (NCU02916) from N. crassa was expressed in P. pastoris. A pH-dependent electron transfer from both CDHs via their cytochrome domains to GH61-3 was observed. The different properties of CDH IIA and CDH IIB and their effect on interactions with GH61-3 are discussed in regard to the proposed in vivo function of the CDH/GH61 enzyme system in oxidative cellulose hydrolysis.

Inhibition of the Peroxygenase Lytic Polysaccharide Monooxygenase by Carboxylic Acids and Amino Acids.

Lytic polysaccharide monooxygenases (LPMOs) are widely distributed in fungi, and catalyze the oxidative degradation of polysaccharides such as cellulose. Despite their name, LPMOs possess a dominant peroxygenase activity that is reflected in high turnover numbers but also causes deactivation. We report on the influence of small molecules and ions on the activity and stability of LPMO during catalysis. Turbidimetric and photometric assays were used to identify LPMO inhibitors and measure their inhibitory effect. Selected inhibitors were employed to study LPMO activity and stability during cellulose depolymerization by HPLC and turbidimetry. It was found that the fungal metabolic products oxalic acid and citric acid strongly reduce LPMO activity, but also protect the enzyme from deactivation. QM calculations showed that the copper atom in the catalytic site could be ligated by bi- or tridentate chelating compounds, which replace two water molecules. MD simulations and QM calculations show that the most likely inhibition pattern is the competition between the inhibitor and reducing agent in the oxidized Cu(II) state. A correlation between the complexation energy and the IC50 values demonstrates that small, bidentate molecules interact strongest with the catalytic site copper and could be used by the fungus as physiological effectors to regulate LPMO activity.

Investigating lytic polysaccharide monooxygenase-assisted wood cell wall degradation with microsensors.

Lytic polysaccharide monooxygenase (LPMO) supports biomass hydrolysis by increasing saccharification efficiency and rate. Recent studies demonstrate that H2O2 rather than O2 is the cosubstrate of the LPMO-catalyzed depolymerization of polysaccharides. Some studies have questioned the physiological relevance of the H2O2-based mechanism for plant cell wall degradation. This study reports the localized and time-resolved determination of LPMO activity on poplar wood cell walls by measuring the H2O2 concentration in their vicinity with a piezo-controlled H2O2 microsensor. The investigated Neurospora crassa LPMO binds to the inner cell wall layer and consumes enzymatically generated H2O2. The results point towards a high catalytic efficiency of LPMO at a low H2O2 concentration that auxiliary oxidoreductases in fungal secretomes can easily generate. Measurements with a glucose microbiosensor additionally demonstrate that LPMO promotes cellobiohydrolase activity on wood cell walls and plays a synergistic role in the fungal extracellular catabolism and in industrial biomass degradation.

Spectroelectrochemical investigation of the glyoxal oxidase activation mechanism.

Glyoxal oxidase (GLOX) is an extracellular source of H2O2 in white-rot secretomes, where it acts in concert with peroxidases to degrade lignin. It has been reported that GLOX requires activation prior to catalytic turnover and that a peroxidase system can fulfill this task. In this study, we verify that an oxidation product of horseradish peroxidase, the radical cation of 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid), is an activator for GLOX. A spectroelectrochemical cell was used to generate the activating radical species, to continuously measure its concentration, and to simultaneously measure the catalytic activity of GLOX based on its O2 consumption. The results show that GLOX can undergo multiple catalytic turnovers upon activation and that activity increases with the activator concentration. However, we also found that the ABTS cation radical can serve as an electron acceptor which becomes visible in the absence of O2. Furthermore, GLOX activity is highly restrained by the naturally occurring, low O2 concentration. We conclude that GLOX is indeed an auxiliary enzyme for H2O2 production in white-rot secretomes. Its turnover rate is strongly regulated by the availability of O2 and the radical generating activity of peroxidases present in the secretome, which acts as a feedback loop for GLOX activity.

Insights into the H2 O2 -driven catalytic mechanism of fungal lytic polysaccharide monooxygenases.

Fungal lytic polysaccharide monooxygenases (LPMOs) depolymerise crystalline cellulose and hemicellulose, supporting the utilisation of lignocellulosic biomass as a feedstock for biorefinery and biomanufacturing processes. Recent investigations have shown that H2 O2 is the most efficient cosubstrate for LPMOs. Understanding the reaction mechanism of LPMOs with H2 O2 is therefore of importance for their use in biotechnological settings. Here, we have employed a variety of spectroscopic and biochemical approaches to probe the reaction of the fungal LPMO9C from N. crassa using H2 O2 as a cosubstrate and xyloglucan as a polysaccharide substrate. We show that a single 'priming' electron transfer reaction from the cellobiose dehydrogenase partner protein supports up to 20 H2 O2 -driven catalytic cycles of a fungal LPMO. Using rapid mixing stopped-flow spectroscopy, alongside electron paramagnetic resonance and UV-Vis spectroscopy, we reveal how H2 O2 and xyloglucan interact with the enzyme and investigate transient species that form uncoupled pathways of NcLPMO9C. Our study shows how the H2 O2 cosubstrate supports fungal LPMO catalysis and leaves the enzyme in the reduced Cu+ state following a single enzyme turnover, thus preventing the need for external protons and electrons from reducing agents or cellobiose dehydrogenase and supporting the binding of H2 O2 for further catalytic steps. We observe that the presence of the substrate xyloglucan stabilises the Cu+ state of LPMOs, which may prevent the formation of uncoupled side reactions.

Chimeric Cellobiose Dehydrogenases Reveal the Function of Cytochrome Domain Mobility for the Electron Transfer to Lytic Polysaccharide Monooxygenase.

The natural function of cellobiose dehydrogenase (CDH) to donate electrons from its catalytic flavodehydrogenase (DH) domain via its cytochrome (CYT) domain to lytic polysaccharide monooxygenase (LPMO) is an example of a highly efficient extracellular electron transfer chain. To investigate the function of the CYT domain movement in the two occurring electron transfer steps, two CDHs from the ascomycete Neurospora crassa (NcCDHIIA and NcCDHIIB) and five chimeric CDH enzymes created by domain swapping were studied in combination with the fungus' own LPMOs (NcLPMO9C and NcLPMO9F). Kinetic and electrochemical methods and hydrogen/deuterium exchange mass spectrometry were used to study the domain movement, interaction, and electron transfer kinetics. Molecular docking provided insights into the protein-protein interface, the orientation of domains, and binding energies. We find that the first, interdomain electron transfer step from the catalytic site in the DH domain to the CYT domain depends on steric and electrostatic interface complementarity and the length of the protein linker between both domains but not on the redox potential difference between the FAD and heme b cofactors. After CYT reduction, a conformational change of CDH from its closed state to an open state allows the second, interprotein electron transfer (IPET) step from CYT to LPMO to occur by direct interaction of the b-type heme and the type-2 copper center. Chimeric CDH enzymes favor the open state and achieve higher IPET rates by exposing the heme b cofactor to LPMO. The IPET, which is influenced by interface complementarity and the heme b redox potential, is very efficient with bimolecular rates between 2.9 × 105 and 1.1 × 106 M-1 s-1.

The H2O2-dependent activity of a fungal lytic polysaccharide monooxygenase investigated with a turbidimetric assay.

BACKGROUND: Lytic polysaccharide monooxygenases (LPMOs) are copper-dependent redox enzymes that cleave recalcitrant biopolymers such as cellulose, chitin, starch and hemicelluloses. Although LPMOs receive ample interest in industry and academia, their reaction mechanism is not yet fully understood. Recent studies showed that H2O2 is a more efficient cosubstrate for the enzyme than O2, which could greatly affect the utilization of LPMOs in industrial settings. RESULTS: We probe the reactivity of LPMO9C from the cellulose-degrading fungus Neurospora crassa with a turbidimetric assay using phosphoric acid-swollen cellulose (PASC) as substrate and H2O2 as a cosubstrate. The measurements were also followed by continuous electrochemical H2O2 detection and LPMO reaction products were analysed by mass spectrometry. Different systems for the in situ generation of H2O2 and for the reduction of LPMO's active-site copper were employed, including glucose oxidase, cellobiose dehydrogenase, and the routinely used reductant ascorbate. CONCLUSIONS: We found for all systems that the supply of H2O2 limited LPMO's cellulose depolymerization activity, which supports the function of H2O2 as the relevant cosubstrate. The turbidimetric assay allowed rapid determination of LPMO activity on a cellulosic substrate without the need for time-consuming and instrumentally elaborate analysis methods.

Characterization of pyranose oxidase variants for bioelectrocatalytic applications.

Pyranose oxidase (POx) catalyzes the oxidation of d-glucose to 2-ketoglucose with concurrent reduction of oxygen to H2O2. POx from Trametes ochracea (ToPOx) is known to react with alternative electron acceptors including 1,4-benzoquinone (1,4-BQ), 2,6-dichlorophenol indophenol (DCPIP), and the ferrocenium ion. In this study, enzyme variants with improved electron acceptor turnover and reduced oxygen turnover were characterized as potential anode biocatalysts. Pre-steady-state kinetics of the oxidative half-reaction of ToPOx variants T166R, Q448H, L545C, and L547R with these alternative electron acceptors were evaluated using stopped-flow spectrophotometry. Higher kinetic constants were observed as compared to the wild-type ToPOx for some of the variants. Subsequently, the variants were immobilized on glassy carbon electrodes. Cyclic voltammetry measurements were performed to measure the electrochemical responses of these variants with glucose as substrate in the presence of 1,4-BQ, DCPIP, or ferrocene methanol as redox mediators. High catalytic efficiencies (Imaxapp/KMapp) compared to the wild-type POx proved the potential of these variants for future bioelectrocatalytic applications, in biosensors or biofuel cells. Among the variants, L545C showed the most desirable properties as determined kinetically and electrochemically.