Evaluation and application of a new scintillator-based heat-resistant back-scattered electron detector during heat treatment in the scanning electron microscope.

A new high-temperature detector dedicated to the collection of backscattered electrons is used in combination with heating stages up to 1050°C, in high-vacuum and low-vacuum modes in order to evaluate its possibilities through signal-to-noise ration measurements and different applications. Four examples of material transformations occurring at high temperature are herein reported: grain growth during annealing of a rolled platinum foil, recrystallisation of a multiphased alloy, oxidation of a Ni-based alloy and complex phase transformations occurring during the annealing of an Al-Si coated boron steel. The detector could be potentially adapted to any type of SEM and it offers good opportunities to perform high-temperature experiments in various atmospheres.

Hydrothermal conversion of mixed uranium(IV)-cerium(III) oxalates into U1-xCexO2+δ·nH2O solid solutions.

Uranium-cerium oxide solid solutions, U1-xCexO2+δ·nH2O, were prepared through hydrothermal conversion of mixed U(IV)-Ce(III) oxalate precursors, cerium being used as a surrogate for plutonium. Whatever the starting pH, the fluorite-type structure of AnO2 was obtained after heating at 250 °C for 24 h. The initial pH of the reaction media appeared to affect significantly the oxide morphology: for pH ≤ 2, the powder was found to be composed of microspheres, whereas for more alkaline pH values, agglomerates of nanocrystallites were found. Furthermore, a study of the hydrothermal treatment duration (T = 250 °C, pH = 8, t = 1-48 h) showed that fluorite-type mixed dioxides started to form after only 1 h, and then became single phase after 3 h. SEM and TEM/EDS analyses revealed that the cationic distribution narrowed with time to finally form highly homogeneous mixed oxides. Such a preparation route was then applied to various cerium incorporation rates and it was found that the formation of U1-xCexO2+δ·nH2O mixed oxides was possible for 0.1 ≤ x ≤ 0.75. In all the systems investigated, the speciation of uranium and cerium was questioned in both the solid and liquid phases. Thermodynamic calculations and evaluation of the O/M ratio in the final oxides led us to understand the complex redox behaviour of uranium and cerium in solution during hydrothermal processes and to propose a conversion mechanism.