RESUMO
The size of liposomal drugs has been demonstrated to strongly correlate with their pharmacokinetics and pharmacodynamics. While the microfluidic method successfully achieves the production of liposomes with well-controlled sizes across various buffer/lipid flow rate ratio (FRR) settings, any adjustments to the FRR inevitably influence the concentration, encapsulation efficiency (EE), and stability of liposomal drugs. Here we describe a controllable cavitation-on-a-chip (CCC) strategy that facilitates the precise regulation of liposomal drug size at any desired FRR. The CCC-enabled size-specific liposomes exhibited striking differences in uptake and biodistribution behaviors, thereby demonstrating distinct antitumor efficacy in both tumor-bearing animal and melanoma patient-derived organoid (PDO) models. Intriguingly, as the liposome size decreased to approximately 80 nm, the preferential accumulation of liposomal drugs in the liver transitioned to a predominant enrichment in the kidneys. These findings underscore the considerable potential of our CCC approach in influencing the pharmacokinetics and pharmacodynamics of liposomal nanomedicines.
Assuntos
Dispositivos Lab-On-A-Chip , Lipossomos , Lipossomos/química , Animais , Humanos , Camundongos , Distribuição Tecidual , Tamanho da Partícula , Antineoplásicos/farmacocinética , Antineoplásicos/farmacologia , Antineoplásicos/química , Antineoplásicos/administração & dosagem , Linhagem Celular Tumoral , Melanoma/tratamento farmacológico , Melanoma/patologiaRESUMO
The development of selective histone deacetylase 6 inhibitors (sHDAC6is) is being recognized as a therapeutic approach for cancers. In this paper, we designed a series of novel tetrahydropyridopyrimidine derivatives as sHDAC6 inhibitors. The most potent compound, 8-(2, 4-bis(3-methoxyphenyl)-5, 8-dihydropyrido [3, 4-d]pyrimidin-7(6H)-yl)-N-hydroxy-8-oxooctanamide (8f), inhibited HDAC6 with IC50 of 6.4 nM, and showed > 48-fold selectivity over other subtypes. In Western blot assay, 8f elevated the levels of acetylated α-tubulin in a dose-dependent manner. In vitro, 8f inhibited RPMI-8226, HL60, and HCT116 tumor cells with IC50 of 2.8, 3.20, and 3.25 µM, respectively. Moreover, 8f showed good antiproliferative activity against a panel of tumor cells.
Assuntos
Antineoplásicos , Humanos , Desacetilase 6 de Histona , Linhagem Celular Tumoral , Inibidores de Histona Desacetilases , Células HCT116 , Proliferação de Células , Relação Estrutura-AtividadeRESUMO
Aim: The aim of our study was to investigate a methylation-associated predictor for prognosis in patients with stage I-III lung adenocarcinoma (LUAD). Methods: A DNA methylation-based signature was developed via univariate, least absolute shrinkage and selection operator and multivariate Cox regression models. Results: We identified a 14-site methylation signature that was correlated with recurrence-free survival of stage I-III lung adenocarcinoma patients. By receiver operating characteristic analysis, we showed the high ability of the 14-site methylation signature for predicting recurrence-free survival. In addition, the nomogram result showed a satisfactory predictive value. Conclusion: We successfully identified a DNA methylation-associated nomogram which can predict recurrence-free survival in patients with stage I-III lung adenocarcinoma.
Lay abstract Non-small-cell lung cancer patients have a high death rate as a result of cancer recurrence, which can lead to a dismal prognosis. Our study aimed to determine a novel DNA methylation-related biomarker for predicting the recurrence-free survival of stage IIII lung adenocarcinoma patients via comprehensive bioinformatics analysis. A prognostic model was developed and verified according to regression analysis. A high predictive ability of the 14-site methylation signature was determined. Additionally, we constructed a nomogram based on methylation-related risk score and several clinicopathological factors. In conclusion, an effective 14-site methylation signature was discovered which may act as a potential hallmark for stage IIII lung adenocarcinoma prognosis, and a DNA methylation-related nomogram was developed to promote the individual treatment of patients with stage IIII lung adenocarcinoma.
RESUMO
To improve the feature extraction of ship-radiated noise in a complex ocean environment, fluctuation-based dispersion entropy is used to extract the features of ten types of ship-radiated noise. Since fluctuation-based dispersion entropy only analyzes the ship-radiated noise signal in single scale and it cannot distinguish different types of ship-radiated noise effectively, a new method of ship-radiated noise feature extraction is proposed based on fluctuation-based dispersion entropy (FDispEn) and intrinsic time-scale decomposition (ITD). Firstly, ten types of ship-radiated noise signals are decomposed into a series of proper rotation components (PRCs) by ITD, and the FDispEn of each PRC is calculated. Then, the correlation between each PRC and the original signal are calculated, and the FDispEn of each PRC is analyzed to select the Max-relative PRC fluctuation-based dispersion entropy as the feature parameter. Finally, by comparing the Max-relative PRC fluctuation-based dispersion entropy of a certain number of the above ten types of ship-radiated noise signals with FDispEn, it is discovered that the Max-relative PRC fluctuation-based dispersion entropy is at the same level for similar ship-radiated noise, but is distinct for different types of ship-radiated noise. The Max-relative PRC fluctuation-based dispersion entropy as the feature vector is sent into the support vector machine (SVM) classifier to classify and recognize ten types of ship-radiated noise. The experimental results demonstrate that the recognition rate of the proposed method reaches 95.8763%. Consequently, the proposed method can effectively achieve the classification of ship-radiated noise.
RESUMO
BACKGROUND: Electronic foetal monitoring (EFM), a method to monitor foetal intrauterine conditions and foetal reserve capacity, is the most extensively used intrauterine monitoring technology in obstetrics. OBJECTIVE: This study aims to compare the Thoth wearable foetal electrocardiogram (foetal ECG [FECG]) monitoring system with a traditional Doppler foetal heart monitoring system before labour to investigate their respective values in clinical application. METHODS: A total of 393 pregnant women admitted to our hospital between 2020 and 2022 participated in this study. They were recruited using the convenience sampling method. We employed a paired design to assess the confusion rate, trend overlap, and foetal heart rate/ECG monitoring consistency, whereas a completely randomised design was used to measure pregnancy outcome indicators. The participants were divided into two groups using a random number table: the Thoth group (n= 196) and the traditional Doppler group (n= 197). Each group was monitored using the corresponding system. RESULTS: The Thoth monitor demonstrated a lower confusion rate compared with the traditional Doppler monitor (0.25% vs 2.04%; χ2= 5.508, P= 0.019). The trend overlap in foetal heart rates was consistently 100%, with 91.2% of readings showing a consistency rate of ⩾ 95%. Additionally, the Thoth monitor recorded a higher cumulative interruption time in the foetal heart rate curve (12.13 ± 2.22 vs 21.02 ± 2.34; t= 18.471, P< 0.001) and more abnormal ECGs (21.21 ± 4.32 vs 18.21 ± 2.91; t= 7.582, P< 0.001) than the traditional Doppler system. CONCLUSION: The Thoth wearable FECG monitor offers several advantages over the traditional Doppler foetal heart monitoring system. These include a reduced confusion rate, more accurate data collection, a lower rate of clinical misjudgement, reduced workload for medical staff, and enhanced comfort during vaginal delivery. The rates of emergency caesarean sections and neonatal asphyxia in the Thoth group were marginally lower than those in the Doppler group, which may be attributed to issues such as ECG disconnection or interference from the maternal heart rate.
RESUMO
Accumulation of senescent cells is a recognized feature in hepatocellular carcinoma (HCC), but their specific types and prognostic implications remain under investigation. This study aimed to delineate senescent cell types and their senescent patterns in HCC using publicly available bulk and single-cell mRNA sequencing data. Through gene expression and gene set enrichment analysis, we identified distinct senescent patterns within HCC samples. Notably, unconventional T cells, specifically natural killer T cells and γδT cells, were found to be the predominant senescent cell types. These cells exhibited enriched pathways related to DNA damage, senescence and the negative regulation of lymphocyte activation. Furthermore, we observed upregulation of the mTOR signaling pathway, which correlated positively with the expression of senescence-associated genes. This suggests a potential regulatory role for mTOR in the senescence of HCC. Strikingly, patients with elevated expression of senescence markers, including p16INK4A, p21, and GLB1, demonstrated significantly reduced overall survival rates. Our findings indicate that immunosenescence in unconventional T cells may play a role in HCC progression. The potential therapeutic implications of targeting the mTOR pathway or eliminating senescent unconventional T cells warrant further exploration to improve HCC patient outcomes.
RESUMO
Background: Sclerosing adenosis (SA) is a common proliferative benign lesion without atypia in the breast that may mimic invasive ductal carcinoma (IDC) on medical imaging, leading to it often being misdiagnosed and mistreated. Consequently, the purpose of this study was to assess the diagnostic value of multimodal ultrasound imaging in distinguishing SA from IDC. Methods: Multimodal ultrasound imaging, including automated breast volume scan (ABVS), elasticity imaging (EI), and color Doppler flow imaging (CDFI), were performed on 120 consecutive patients comprising 122 breast lesions (54 SA, 68 IDC). All lesions were pathologically confirmed. Multimodal ultrasound imaging features were compared between the two groups. Binary logistic regression analysis based on ABVS, EI, and CDFI was conducted to formulate a logistic regression equation for differentiating SA from IDC. The diagnostic performances of ABVS, EI, CDFI, and their combination were compared by the receiver operating characteristic (ROC) curve analysis. Results: The sensitivity, specificity, and accuracy of ABVS, EI, CDFI, and their combination in differentiating SA from IDC were, respectively, 75.00%, 72.22%, and 73.77%; 86.76%, 72.22%, and 80.33%; 73.53%, 64.81%, and 69.67%; and 88.24%, 74.07%, and 81.97%. Combining multimodal ultrasound imaging yielded an area under the curve (AUC) of 0.895 (95% confidence interval: 0.827-0.943), which was higher than that of ABVS, EI, and CDFI, with AUC values of 0.736, 0.795, and 0.692, respectively, and the difference was statistically significant (ABVS vs. combined model, P<0.001; CDFI vs. combined model, P<0.001; EI vs. combined model, P<0.001). There was no significant difference in the diagnostic efficacy among the three imaging modalities (ABVS vs. EI, P=0.266; ABVS vs. CDFI, P=0.4671; EI vs. CDFI, P=0.051). Compared with those in IDC, the calcification (16.67% vs. 57.35%; P<0.001) and retraction phenomena in the coronal planes (18.52% vs. 57.35%; P<0.001) were less common in patients with SA, while circumscribed margin (38.89% vs. 5.88%; P<0.001), vascularity grade 0-I (64.81% vs. 26.47%; P<0.001), and elasticity scores 1-3 (72.22% vs. 13.24%; P<0.001) were more frequently found in patients with SA. Patients with SA were significantly younger than were patients with IDC (43±11 vs. 54±11 years; P<0.001), and the lesion size was smaller in patients with SA than in those with IDC (median size 1.0 cm; interquartile range (IQR), 0.9 cm vs. median size 1.3 cm; IQR, 1.3 cm; P<0.001). Conclusions: The preliminary results suggested that multimodal ultrasound imaging can improve the diagnostic accuracy of SA and provide additional information for differential diagnosis of SA and IDC.
RESUMO
Ultra-high frequency (>100 MHz) acoustic waves feature biocompatibility and high sensitivity and allow biomedical imaging and acoustic tweezers. Primarily, excellent spatial resolution and broad bandwidth at ultra-high frequency is the goal for pathological research and cell selection at the cellular level. Here, we propose an efficient approach to visualize mouse brain atrophy by self-focused ultrasonic sensors at ultra-high frequency with ultra-broad bandwidth. The numerical models of geometry and theoretically predicted acoustic parameters for half-concave piezoelectric elements are calculated by the differential method, which agrees with measured results (lateral resolution: 24 µm, and bandwidth: 115% at -6 dB). Compared with the brain slices of 2-month-old mouse, the atrophy visualization of the 6-month-old mouse brain was realized by C-mode imaging with an acoustic microscopy system, which is a potential prospect for diagnosis and treatment of Alzheimer's disease (AD) combined with neuroscience. Meanwhile, the acoustic properties of the brain slices were quantitatively measured by the acoustic microscopy. These encouraging results demonstrate the promising application for high-resolution imaging in vitro biological tissue with ultra-high frequency self-focusing ultrasonic sensors.
Assuntos
Diagnóstico por Imagem , Ultrassom , Camundongos , Animais , Acústica , Encéfalo/diagnóstico por imagem , AtrofiaRESUMO
The development of high-temperature nondestructive testing (NDT) requires ultrasonic transducers with good temperature resistance and high sensitivity for improved detection efficiency. Piezoelectric composite can improve the performance of transducers because of its high electromechanical coupling coefficient and adjustable acoustic impedance. In this study, 1-3-2 composites and 1-3-2 high-temperature composite ultrasonic transducers (HTCUTs) based on 0.36BiScO3-0.64PbTiO3 (BSPT), which is preferred piezoelectric materials at 200 ° C- 300 ° C, and high-temperature epoxy with a center frequency of 6 MHz were designed and fabricated. From 25 ° C to 250 ° C, 1-3-2 composites show a higher electromechanical coupling coefficient kt especially at high temperatures (~0.53 at 25 ° C and ~0.64 at 250 ° C) than monolithic BSPT (~0.5). The signal of the pulse-echo response of 1-3-2 HTCUTs is distinguishable up to 250 ° C and remains stable ( [Formula: see text] mV) below 150 ° C, exhibiting higher sensitivity (improved by 7 dB) than that of monolithic BSPT high-temperature ultrasonic transducers (HTUTs). Bandwidth has been greatly enhanced especially at high temperatures (~103% at 250 ° C) compared with that of monolithic BSPT HTUTs (~30% at 250 ° C). To verify the excellent performance, B-mode scanning imaging measurement of a stepped steel block and defect location detection of a steel block was performed, showing the potential for high-temperature NDT applications.
RESUMO
Optical imaging and phototherapy in deep tissues face notable challenges due to light scattering. We use encoded acoustic holograms to generate three-dimensional acoustic fields within the target medium, enabling instantaneous and robust modulation of the volumetric refractive index, thereby noninvasively controlling the trajectory of light. Through this approach, we achieved a remarkable 24.3% increase in tissue heating rate in vitro photothermal effect tests on porcine skin. In vivo photoacoustic imaging of mouse brain vasculature exhibits an improved signal-to-noise ratio through the intact scalp and skull. These findings demonstrate that our strategy can effectively suppress light scattering in complex biological tissues by inducing low-angle scattering, achieving an effective depth reaching the millimeter scale. The versatility of this strategy extends its potential applications to neuroscience, lithography, and additive manufacturing.
Assuntos
Técnicas Fotoacústicas , Camundongos , Animais , Suínos , Técnicas Fotoacústicas/métodos , Fototerapia , Crânio , Acústica , RefratometriaRESUMO
In our previous study, the sequence of a matrix attachment region binding protein (MBP) cDNA was cloned from the unicellular green alga Dunaliella salina. However, the nucleotide sequence of this gene has not been reported so far. In this paper, the nucleotide sequence of MBP was cloned and characterized, and its gene copy number was determined. The MBP nucleotide sequence is 5641 bp long, and interrupted by 12 introns ranging from 132 to 562 bp. All the introns in the D. salina MBP gene have orthodox splice sites, exhibiting GT at the 5' end and AG at the 3' end. Southern blot analysis showed that MBP only has one copy in the D. salina genome.
Assuntos
Clorófitas/metabolismo , Proteínas Fúngicas/genética , Proteínas de Ligação à Região de Interação com a Matriz/genética , Sequência de Bases , Southern Blotting , Clonagem Molecular , DNA de Algas/química , DNA de Algas/metabolismo , DNA Complementar/química , DNA Complementar/metabolismo , Proteínas Fúngicas/química , Proteínas Fúngicas/metabolismo , Genoma de Planta , Genômica , Íntrons , Proteínas de Ligação à Região de Interação com a Matriz/química , Proteínas de Ligação à Região de Interação com a Matriz/metabolismo , Regiões de Interação com a Matriz , Dados de Sequência MolecularRESUMO
Focused ultrasound featuring non-destructive and high sensitivity has attracted widespread attention in biomedical and industrial evaluation. However, most traditional focusing techniques focus on the design and improvement of single-point focusing, neglecting the need to carry more dimensions of multifocal beams. Here we propose an automatic multifocal beamforming method, which is implemented using a four-step phase metasurface. The metasurface composed of four-step phases improves the transmission efficiency of acoustic waves as a matching layer and enhances the focusing efficiency at the target focal position. The change in the number of focused beams does not affect the full width at half maximum (FWHM), revealing the flexibility of the arbitrary multifocal beamforming method. Phase-optimized hybrid lenses reduce the sidelobe amplitude, and excellent agreement is observed between the simulation and experiments for triple-focusing beamforming metasurface lenses. The particle trapping experiment further validates the profile of the triple-focusing beam. The proposed hybrid lens can achieve flexible focusing in three dimensions (3D) and arbitrary multipoint, which may have potential prospects for biomedical imaging, acoustic tweezers, and brain neural modulation.
RESUMO
This study investigates the relationship between the composition segregation in lead magnesium niobate-lead titanate (PMN-PT; PMN-29%PT, PMN-29.5%PT, PMN-30%PT, PMN-30.5%PT, and PMN-31%PT) single crystals within morphotropic phase boundary (MPB) and the corresponding ultrasonic transducer performance through PiezoCAD modeling and real transducer testing. For five crystals with compositions distributed across the main body of a crystal ingot, the piezoelectric coefficient and free relative permittivity values were measured to vary by over 30%, whereas the transducer bandwidth and center frequency values were modeled to change by less than 10%. For the single-element ultrasonic transducers fabricated using those crystals without matching layers, the variations of -6-dB bandwidth, insertion loss, receiver-free field voltage response, and center frequency were measured to be 9.61%, -15.23%, 9.76%, and 1.41%, respectively, confirming the modeling results. Using the Mason and Krimholtz, Leedom, and Matthaei (KLM) models, it is found that the relatively stable transducer performance can be attributed to the relatively consistent electromechanical coupling coefficient, acoustic impedance, and clamped relative permittivity originated from the stable elastic compliance properties among the crystals of various compositions. It is expected that the relatively stable performance could be extended to multielement transducers with matching layers for the same contributing mechanisms. Our results suggest that it is possible to use crystal plates of different compositions within the MPB region, obtained from one and the same ingot, to fabricate a batch of ultrasonic transducers that will exhibit a similar performance, significantly reducing the cost of materials.
Assuntos
Transdutores , Ultrassom , Desenho de EquipamentoRESUMO
Lake carbon (C) cycling is a key component of the global C cycle and associated C source and sink processes. The partial pressure of carbon dioxide (pCO2) and carbon dioxide (CO2) exchange flux at the lake-air interface (Fc) are controlled by complex physical, chemical, and biological mechanisms. It would be instructively significant to determine whether hydrological processes drive conversion shifts between C sources and sinks in floodplain-lake systems. Findings from this study show that exogenous input and in situ metabolism related to photosynthesis, respiration, and organic matter degradation were the main driving mechanisms of CO2 absorption and release in a large floodplain-lake system (i.e., Lake Poyang). Moreover, the intense and frequent water-level fluctuations inherent to floodplain-lakes may also have a direct or indirect impact on C cycling processes and CO2 exchange rates in floodplain-lake systems via their effect on physical processes, inorganic C transport, in-situ metabolic processes. We confirmed the potential of C source and sink conversion in floodplain-lakes under hydrological fluctuations, and strengthen the understanding of driving mechanisms of C source and sink conversion in floodplain systems.
Assuntos
Dióxido de Carbono , Lagos , China , Hidrologia , ÁguaRESUMO
The control of acoustic field has great potential in many applications such as medical treatment, neuro-modulation, and bio-imaging. Recently, acoustic lenses and phased arrays have become common ways of controlling acoustic fields. However, the shortcomings of the two ways are obvious. Acoustic lenses lack flexibility after design, and phased arrays have complicated structures and need to adjust the parameters of each array element. In this work, we propose an alternative for sound field control using a flexible and adjustable "acoustic projector," and two symmetric mirrors are used to change the direction of propagation of an acoustic wave produced by a piezoelectric element and realize acoustic focusing in the target region. The 2-D "acoustic projector" model was built in finite element simulation, and the feasibility was verified with an actual prototype. The sound intensity produced by the piezoelectric element at different horizontal and vertical positions along the target area can be accurately controlled by two adjustable mirrors. When the angle of the mirror ranges from 30° to 40°, the focal depth can change from 39 to 140 mm. Furthermore, the focus can be controlled in a sector with an angle of 60°. The "acoustic projector" demonstrates simple but precise control of acoustic fields and may broaden their applicability. To show its imaging ability, the three groups of target balls at different positions were imaged and their position information by scanning the mirrors in simulation was given.
Assuntos
Lentes , Ultrassom , Acústica , Transdutores , UltrassonografiaRESUMO
Transcranial ultrasound stimulation (TUS) is a young neuromodulation technology, which uses ultrasound to achieve non-invasive stimulation or inhibition of deep intracranial brain regions, with the advantages of non-invasive, deep penetration, and high resolution. It is widely considered to be one of the most promising techniques for probing brain function and treating brain diseases. In preclinical studies, developing miniaturized transducers to facilitate neuromodulation in freely moving small animals is critical for understanding the mechanism and exploring potential applications. In this article, a miniaturized transducer with a half-concave structure is proposed. Based on the finite element simulation models established by PZFlex software, several ultrasound transducers with different concave curvatures were designed and analyzed. Based on the simulation results, half-concave focused ultrasonic transducers with curvature radii of 5 mm and 7.5 mm were fabricated. Additionally, the emission acoustic fields of the ultrasonic transducers with different structures were characterized at their thickness resonance frequencies of 1 MHz using a multifunctional ultrasonic test platform built in the laboratory. To verify the practical ability for neuromodulation, different ultrasound transducers were used to induce muscle activity in mice. As a result, the stimulation success rates were (32 ± 10)%, (65 ± 8)%, and (84 ± 7)%, respectively, by using flat, #7, and #5 transducers, which shows the simulation and experimental results have a good agreement and that the miniaturized half-concave transducer could effectively converge the acoustic energy and achieve precise and effective ultrasonic neuromodulation.
RESUMO
The high-frequency ultrasonic transducers with larger bandwidths yield excellent imaging performance in the biomedical field. However, achieving perfect acoustic impedance matching from the piezo-element to the target medium in the operating frequency spectrum is still a challenge. Conventional matching layers are mostly fabricated by only one or two uniform materials which are limited by their acoustic property. We propose a novel composite matching layer with gradient acoustic impedance based on a 1-3 gradient composite structure and multilevel matching theory. The proposed gradient-composite matching layer applied for ultrasonic transducer provides efficient impedance matching and ultrawide bandwidth which can significantly improve the quality of biomedical imaging. The active aperture size of the matching layer is 5× 5 mm2, and the overall thickness for five equivalent layers is 115 [Formula: see text]. The -6-dB bandwidth and the center frequency obtained by the ultrasonic transducer equipped with the 1-3 gradient composite matching layer are 141.7% and 22.3 MHz, respectively. The exceedingly good imaging performance of the fabricated ultrasonic transducer was demonstrated by the tungsten wire phantom and study on the biological tissues of a zebrafish and porcine eyeball. The theoretical and experimental results provide a novel train of thought for improving the quality of biomedical ultrasonic imaging.
Assuntos
Ultrassom , Peixe-Zebra , Acústica , Animais , Impedância Elétrica , Desenho de Equipamento , Suínos , Transdutores , Ultrassonografia/métodosRESUMO
Ultrasonic transducers with broad bandwidth are considered to have high axial resolution and good ultrasound scanning flexibility for the clinical applications. The limitations of spatial resolution due to bandwidth are of great concern in ultrasound medical imaging. The method of acoustic impedance matching between the piezoelectric element and medium is commonly used to obtain broad bandwidth and high resolution. In this study, an optimized backing layer design was proposed to broaden the bandwidth by adding a tunable acoustic impedance matching layer of backing (AIMLB) between the backing layer and the piezoelectric ceramic element. The Mason equivalent circuit method was used to analyze the effect of the backing material composition and its structure on the bandwidth of the transducer. The optimized transducer was simulated using the finite-element method with the PZFlex software. Based on the PZFlex simulations, a 20-MHz ultrasonic transducer using the AIMLB with a bandwidth of approximately 92.29% was fabricated. The experimental results were in good agreement with the simulations. The ultrasonic imaging indicated that the designed ultrasonic transducer with an additional AIMLB had high performance with good imaging capability.
Assuntos
Transdutores , Ultrassom , Cerâmica , Desenho de Equipamento , UltrassonografiaRESUMO
( 1- x )BiScO3- x PbTiO3 (BS-PT) ceramics have excellent piezoelectricity and high Curie temperature at its morphotropic phase boundary (MPB) ( x = 0.64 ), so it is a promising piezoelectric material for fabricating high-temperature ultrasonic transducer (HTUT). Electric properties of 0.36BS-0.64PT ceramics were characterized at different temperatures, and an HTUT with the center frequency of about 15 MHz was designed by PiezoCAD based on the measuring results. The prepared HTUT was tested in a silicone oil bath at different temperatures systematically. The test results show that the HTUT can maintain a stable electrical resonance until 290 °C and get a clear echo response until 250 °C with slight changes of the center frequency. Then, a stepped metal block submerged in silicone oil was imaged by the HTUT until 250 °C. Velocity of silicone oil and axial resolution of the HTUT at different temperatures was calculated. The results verify the capability of 0.36BS-0.64PT-based HTUT for high-temperature ultrasonic imaging applications.
Assuntos
Transdutores , Ultrassom , Desenho de Equipamento , Análise de Falha de Equipamento , TemperaturaRESUMO
Acoustic tweezers for microparticle non-contact manipulation have attracted attention in the biomedical engineering field. The key components of acoustic tweezers are piezoelectric materials, which convert electrical energy to mechanical energy. The most widely used piezoelectric materials are lead-based materials. Because of the requirement of environmental protection, lead-free piezoelectric materials have been widely researched in past years. In our previous work, textured lead-free (K, Na)NbO3 (KNN)-based piezoelectric ceramics with high piezoelectric performance were prepared. In addition, the acoustic impedance of the KNN-based ceramics is lower than that of lead-based materials. The low acoustic impedance could improve the transmission efficiency of the mechanical energy between acoustic tweezers and water. In this work, acoustic tweezers were prepared to fill the gap between lead-free piezoelectric materials research and applications. The tweezers achieved 13 MHz center frequency and 89% -6 dB bandwidth. The -6 dB lateral and axial resolution of the tweezers were 195 µm and 114 µm, respectively. Furthermore, the map of acoustic pressure measurement and acoustic radiation calculation for the tweezers supported the trapping behavior for 100 µm diameter polystyrene microspheres. Moreover, the trapping and manipulation of the microspheres was achieved. These results suggest that the KNN-based acoustic tweezers have a great potential for further applications.