RESUMO
Fast development of space technologies poses a strong challenge for elastic materials, which need to be not only lightweight, strong and compliant, but also able to maintain stable elasticity over a wide temperature range1-4. Here we report a lightweight magnesium-scandium strain glass alloy (Mg with 21.3 at.% Sc) that meets this challenge. This alloy is as light (density ~2 g cm-3) and compliant as organic-based materials5-7 like bones and glass fibre reinforced plastics, but in contrast with those materials, it possesses a nearly temperature-independent (or Elinvar-type), ultralow Young's modulus (~20-23 GPa) over a wide temperature range from room temperature down to 123 K; a higher yield strength of ~200-270 MPa; and a long fatigue life of over one million cycles. As a result, it exhibits a relatively high, temperature-independent elastic energy density of ~0.5 kJ kg-1 among known materials at a moderate stress level of 200 MPa. We show that its exceptional properties stem from a strain glass transition, and the Elinvar-type elasticity originates from its moderate elastic softening effect cancelling out the ever-present elastic hardening. Our findings provide insight into designing materials that possess unconventional and technologically important elastic properties.
Assuntos
Ligas , Módulo de Elasticidade , Elasticidade , Teste de Materiais , TemperaturaRESUMO
In addition to customizing shapes of metal bone substitutes for patients, the 3D printing technique can reduce the modulus of the substitutes through the design and manufacture of interconnected porous structures, achieving the modulus match between substitute and surrounding bone to improve implant longevity. However, the porous bone substitutes take more risks of postoperative infection due to its much larger surface area compared with the traditional casting solid bone substitute. Here, we prepared of gentamicin-loaded silk fibroin coatings on 3D-printed porous cobalt-chromium-molybdenum (CoCrMo) bone substitutes via electrophoretic deposition technique. Through optimization, relatively intact, continuous, homogeneous, and conformal coatings with a thickness of 2.30 ± 0.58 µm were deposited around the struts with few pore blocked. The porous metal structures exhibited no loss in mechanical properties after the anode galvanic corrosion in EPD process. The initial osteoblastic response on coatings was better than that on metal surface, including cell spreading, proliferation and cytotoxicity. Antibacterial efficacy experiments showed that the coatings had an antibacterial effect on both adherent and planktonic bacteria within 1 week. These results suggested that the beneficial properties of anode electrophoretic deposited silk fibroin coatings could be exploited to improve the biological functionality of porous structures made of medical metals.
Assuntos
Substitutos Ósseos/síntese química , Materiais Revestidos Biocompatíveis/síntese química , Eletroforese/métodos , Gentamicinas/síntese química , Próteses e Implantes/microbiologia , Substitutos Ósseos/química , Substitutos Ósseos/uso terapêutico , Cromo/química , Materiais Revestidos Biocompatíveis/química , Materiais Revestidos Biocompatíveis/uso terapêutico , Cobalto/química , Fibroínas/química , Fibroínas/uso terapêutico , Gentamicinas/química , Gentamicinas/uso terapêutico , Humanos , Molibdênio/química , Osteoblastos/efeitos dos fármacos , Osteoblastos/microbiologia , Porosidade , Impressão Tridimensional , Próteses e Implantes/efeitos adversos , Seda/química , Seda/uso terapêutico , Propriedades de SuperfícieRESUMO
The aryl/methyl fragmentation selectivities for the photooxidations of phenyltrimethylstannane and (4-methylphenyl)trimethylstannane by 1,2,4,5-tetracyanobenzene in acetonitrile were found to depend on the codonor used to generate the stannane cation radical intermediates. The aryl/methyl fragmentation selectivities for phenyltrimethylstannane and (4-methylphenyl)trimethylstannane varied by factors of 26 and 5.6, respectively, depending on the structures of the codonors. The fragmentation selectivities could be correlated with the oxidation potentials of the codonors and their steric bulk. The results can be interpreted by the intermediacy of heterodimer cation radicals formed between the stannane cation radicals and the neutral codonors, which thereby affect the fragmentation selectivities.
RESUMO
Aryltrialkylstannane cation radicals were generated and characterized by nanosecond transient absorption spectroscopy. Kinetics show the fragmentations of the stannane cation radicals occur by a bimolecular, nucleophile-assisted mechanism (S(N)2). Consistent with this hypothesis, steric effects on both the nucleophile and the stannane cation radicals were observed. Steady-state, preparative photooxidation experiments show that aryltrimethylstannane cation radicals have an unusual preference for loss of aryl radicals over methyl radicals and that the selectivity for aryl vs methyl radical loss is dependent on the identity of the nucleophile. The preference for loss of aryl radicals is rationalized by a hypothesis based on Bent's rules.
RESUMO
The redox equilibrium method was used to determine accurate oxidation potentials in acetonitrile for 40 heteroatom-substituted compounds. These include methoxy-substituted benzenes and biphenyls, aromatic amines, and substituted acetanilides. The redox equilibrium method allowed oxidation potentials to be determined with high precision (≤ ±6 mV). Whereas most of the relative oxidation potentials follow well-established chemical trends, interestingly, the oxidation potentials of substituted N-methylacetanilides were found to be higher than those of the corresponding acetanilides. Density functional theory calculations provided insight into the origin of these surprising results in terms of the preferred conformations of the amides versus their cation radicals.
RESUMO
Introduction: Fingered citron slices possess significant nutritional value and economic advantages as herbal products that are experiencing increasing demand. The grading of fingered citron slices plays a crucial role in the marketing strategy to maximize profits. However, due to the limited adoption of standardization practices and the decentralized structure of producers and distributors, the grading process of fingered citron slices requires substantial manpower and lead to a reduction in profitability. In order to provide authoritative, rapid and accurate grading standards for the market of fingered citron slices, this paper proposes a grading detection model for fingered citron slices based on improved YOLOv8n. Methods: Firstly, we obtained the raw materials of fingered citron slices from a dealer of Sichuan fingered citron origin in Shimian County, Ya'an City, Sichuan Province, China. Subsequently, high-resolution fingered citron slices images were taken using an experimental bench, and the dataset for grading detection of fingered citron slices was formed after manual screening and labelling. Based on this dataset, we chose YOLOv8n as the base model, and then replaced the YOLOv8n backbone structure with the Fasternet main module to improve the computational efficiency in the feature extraction process. Then we redesigned the PAN-FPN structure used in the original model with BiFPN structure to make full use of the high-resolution features to extend the sensory field of the model while balancing the computation amount and model volume, and finally we get the improved target detection algorithm YOLOv8-FCS. Results: The findings from the experiments indicated that this approach surpassed the conventional RT-DETR, Faster R-CNN, SSD300 and YOLOv8n models in most evaluation indicators. The experimental results show that the grading accuracy of the YOLOv8-FCS model reaches 98.1%, and the model size is only 6.4 M, and the FPS is 130.3. Discussion: The results suggest that our model offers both rapid and precise grading for fingered citron slices, holding significant practical value for promoting the advancement of automated grading systems tailored to fingered citron slices.
RESUMO
With the high incidence rate, distinctive implant characteristic and unique infection pattern, peri-implantitis (PI) requires a specially designed implant animal model for the researches on the pathogenesis and treatments. Previous small-animal PI models exhibit variability in implant site selection, design, and surgical procedures resulting in unnecessary tissue damage and less effectivity. Herein, a quantitative-analysis-based standardized rat model for transmucosal PI-related research was proposed. After dissecting the anatomic structures of the rat maxilla, we determined that placing the implant anterior to the molars in the rat maxilla streamlined the experimental period and enhanced animal welfare. We standardized the model by controlling the rat strain, gender, and size. The customized implant and a series of matched surgical instruments were appropriately designed. A clear, step-by-step surgical process was established. These designs ensured the success rate, stability, and replicability of the model. Each validation method confirmed the successful construction of the model. This study proposed a quantitative-analysis-based standardized transmucosal PI rat model with improved animal welfare and reliable procedures. This model could provide efficient in vivo insights to study the pathogenesis and treatments of PI and preliminary screening data for further large-animal and clinical trials.
RESUMO
With the discovery of the pivotal role of macrophages in tissue regeneration through shaping the tissue immune microenvironment, various immunomodulatory strategies have been proposed to modify traditional biomaterials. Decellularized extracellular matrix (dECM) has been extensively used in the clinical treatment of tissue injury due to its favorable biocompatibility and similarity to the native tissue environment. However, most reported decellularization protocols may cause damage to the native structure of dECM, which undermines its inherent advantages and potential clinical applications. Here, we introduce a mechanically tunable dECM prepared by optimizing the freeze-thaw cycles. We demonstrated that the alteration in micromechanical properties of dECM resulting from the cyclic freeze-thaw process contributes to distinct macrophage-mediated host immune responses to the materials, which are recently recognized to play a pivotal role in determining the outcome of tissue regeneration. Our sequencing data further revealed that the immunomodulatory effect of dECM was induced via the mechnotrasduction pathways in macrophages. Next, we tested the dECM in a rat skin injury model and found an enhanced micromechanical property of dECM achieved with three freeze-thaw cycles significantly promoted the M2 polarization of macrophages, leading to superior wound healing. These findings suggest that the immunomodulatory property of dECM can be efficiently manipulated by tailoring its inherent micromechanical properties during the decellularization process. Therefore, our mechanics-immunomodulation-based strategy provides new insights into the development of advanced biomaterials for wound healing.
RESUMO
As we reported recently, endergonic to mildly exergonic electron transfer between neutral aromatics (benzenes and biphenyls) and their radical cations in acetonitrile follows a Sandros-Boltzmann (SB) dependency on the reaction free energy (ΔG); i.e., the rate constant is proportional to 1/[1 + exp(ΔG/RT)]. We now report deviations from this dependency when one reactant is sterically crowded: 1,4-di-tert-butylbenzene (C1), 1,3,5-tri-tert-butylbenzene (C2), or hexaethylbenzene (C3). Obvious deviation from SB behavior is observed with C1. Stronger deviation is observed with the more crowded C2 and C3, where steric hindrance increases the interplanar separation at contact by ~1 Å, significantly decreasing the π orbital overlap. Consequently, electron transfer (k(et)) within the contact pair becomes slower than diffusional separation (k(-d)), causing deviation from the SB dependency, especially near ΔG = 0. Fitting the data to a standard electron-transfer theory gives small matrix elements (~5-7 meV) and reasonable reorganization energies. A small systematic difference between reactions of C3 with benzenes vs biphenyls is rationalized in terms of small differences in the electron-transfer parameters that are consistent with previous data. The influence of solvent viscosity on the competition between k(et) and k(-d) was investigated by comparing reactions in acetonitrile and propylene carbonate.
RESUMO
Risk of metastasis is increased by the presence of chromosome 3 monosomy in uveal melanoma (UM). This study aimed to identify more accurate biomarker for risk of metastasis in UM. A total of 80 patients with UM from TCGA were assigned to two groups based on the metastatic status, and bioinformatic analyses were performed to search for critical genes for risk of metastasis. SLC25A38, located on chromosome 3, was the dominant downregulated gene in metastatic UM patients. Low expression of SLC25A38 was an independent predictive and prognostic factor in UM. The predictive potential of SLC25A38 expression was superior to that of pervious reported biomarkers in both TCGA cohort and GSE22138 cohort. Subsequently, its role in promoting metastasis was explored in vitro and in vivo. Knock-out of SLC25A38 could enhance the migration ability of UM cells, and promote distant metastasis in mice models. Through the inhibition of CBP/HIF-mediated pathway followed by the suppression of pro-angiogenic factors, SLC25A38 was situated upstream of metastasis-related pathways, especially angiogenesis. Low expression of SLC25A38 promotes angiogenesis and metastasis, and identifies increased metastatic risk and worse survival in UM patients. This finding may further improve the accuracy of prognostic prediction for UM.
Assuntos
Melanoma , Neoplasias Uveais , Animais , Biomarcadores , Biologia Computacional , Humanos , Melanoma/patologia , Camundongos , Proteínas de Transporte da Membrana Mitocondrial , Metástase Neoplásica , Neoplasias Uveais/genética , Neoplasias Uveais/metabolismo , Neoplasias Uveais/patologiaRESUMO
BACKGROUND: Transepithelial medical devices are increasing utilized in clinical practices. However, the damage of continuous natural epithelial barrier has become a major risk factor for the failure of epithelium-penetrating implants. How to increase the "epithelial barrier structures" (focal adhesions, hemidesmosomes, etc.) becomes one key research aim in overcoming this difficulty. Directly targeting the in situ "epithelial barrier structures" related proteins (such as fibronectin) absorption and functionalization can be a promising way to enhance interface-epithelial integration. METHODS: Herein, we fabricated three plasma polymerized bio-interfaces possessing controllable surface chemistry. Their capacity to adsorb and functionalize fibronectin (FN) from serum protein was compared by Liquid Chromatography-Tandem Mass Spectrometry. The underlying mechanisms were revealed by molecular dynamics simulation. The response of gingival epithelial cells regarding the formation of epithelial barrier structures was tested. RESULTS: Plasma polymerized surfaces successfully directed distinguished protein adsorption profiles from serum protein pool, in which plasma polymerized allylamine (ppAA) surface favored adsorbing adhesion related proteins and could promote FN absorption and functionalization via electrostatic interactions and hydrogen bonds, thus subsequently activating the ITG ß1-FAK-mTOR signaling and promoting gingival epithelial cells adhesion. CONCLUSION: This study offers an effective perspective to overcome the current dilemma of the inferior interface-epithelial integration by in situ protein absorption and functionalization, which may advance the development of functional transepithelial biointerfaces. Tuning the surface chemistry by plasma polymerization can control the adsorption of fibronectin and functionalize it by exposing functional protein domains. The functionalized fibronectin can bind to human gingival epithelial cell membrane integrins to activate epithelial barrier structure related signaling pathway, which eventually enhances the formation of epithelial barrier structure.
RESUMO
Biogenic collagen membranes have been widely used as soft tissue barriers in guided bone regeneration (GBR) and guided tissue regeneration (GTR). Nevertheless, their clinical performance remains unsatisfactory because of their low mechanical strength and fast degradation rate in vivo. Although cross-linking with chemical agents is effective and reliable for prolonging the degradation time of collagen membranes, some adverse effects including potential cytotoxicity and undesirable tissue integration have been observed during this process. As a fundamental nutritional trace element, zinc plays an active role in promoting the growth of cells and regulating the degradation of the collagen matrix. Herein, a biogenic collagen membrane was cross-linked with glutaraldehyde-alendronate to prolong its degradation time. The physiochemical and biological properties were enhanced by the incorporation of zinc-doped nanohydroxyapatite (nZnHA), with the native structure of collagen preserved. Specifically, the cross-linking combined with the incorporation of 1% and 2% nZnHA seemed to endow the membrane with the most appropriate biocompatibility and tissue integration capability among the cross-linked membranes, as well as offering a degradation period of six weeks in a rat subcutaneous model. Thus, improving the clinical performance of biogenic collagen membranes by cross-linking together with the incorporation of nZnHA is a promising strategy for the improvement of biogenic collagen membranes. STATEMENT OF SIGNIFICANCE: The significance of this research includes.
Assuntos
Durapatita , Zinco , Implantes Absorvíveis , Animais , Regeneração Óssea , Colágeno/química , Colágeno/farmacologia , Durapatita/farmacologia , Membranas Artificiais , Ratos , Zinco/farmacologiaRESUMO
Nanosecond transient absorption methods were used to determine accurate oxidation potentials (E(ox)) in acetonitrile for benzene and a number of its alkyl-substituted derivatives. E(ox) values were obtained from a combination of equilibrium electron-transfer measurements and electron-transfer kinetics of radical cations produced from pairs of benzene and biphenyl derivatives, with one member of the pair acting as a reference. Using a redox-ladder approach, thermodynamic oxidation potentials were determined for 21 benzene and biphenyl derivatives. Of particular interest, E(ox) values of 2.48 +/- 0.03 and 2.26 +/- 0.02 V vs SCE were obtained for benzene and toluene, respectively. Because of a significant increase in solvent stabilization of the radical cations with decreasing alkyl substitution, the difference between ionization and oxidation potentials of benzene is approximately 0.5 eV larger than that of hexamethylbenzene. Oxidation potentials of the biphenyl derivatives show an excellent correlation with substituent sigma+ values, which allows E(ox) predictions for other biphenyl derivatives. Significant dimer radical cation formation was observed in several cases and equilibrium constants for dimerization were determined. Methodologies are described for determining accurate electron-transfer equilibrium constants even when dimer radical cations are formed. Additional equilibrium measurements in trifluoroacetic acid, methylene chloride, and ethyl acetate demonstrated that solvation differences can substantially alter and even reverse relative E(ox) values.