RESUMO
BACKGROUND: Komagataella phaffii (Pichia pastoris) has emerged as a common and robust biotechnological platform organism, to produce recombinant proteins and other bioproducts of commercial interest. Key advantage of K. phaffii is the secretion of recombinant proteins, coupled with a low host protein secretion. This facilitates downstream processing, resulting in high purity of the target protein. However, a significant but often overlooked aspect is the presence of an unknown polysaccharide impurity in the supernatant. Surprisingly, this impurity has received limited attention in the literature, and its presence and quantification are rarely addressed. RESULTS: This study aims to quantify this exopolysaccharide in high cell density recombinant protein production processes and identify its origin. In stirred tank fed-batch fermentations with a maximal cell dry weight of 155 g/L, the polysaccharide concentration in the supernatant can reach up to 8.7 g/L. This level is similar to the achievable target protein concentration. Importantly, the results demonstrate that exopolysaccharide production is independent of the substrate and the protein production process itself. Instead, it is directly correlated with biomass formation and proportional to cell dry weight. Cell lysis can confidently be ruled out as the source of this exopolysaccharide in the culture medium. Furthermore, the polysaccharide secretion can be linked to a mutation in the HOC1 gene, featured by all derivatives of strain NRRL Y-11430, leading to a characteristic thinner cell wall. CONCLUSIONS: This research sheds light on a previously disregarded aspect of K. phaffii fermentations, emphasizing the importance of monitoring and addressing the exopolysaccharide impurity in biotechnological applications, independent of the recombinant protein produced.
Assuntos
Fermentação , Proteínas Recombinantes , Saccharomycetales , Proteínas Recombinantes/biossíntese , Proteínas Recombinantes/metabolismo , Proteínas Recombinantes/genética , Saccharomycetales/metabolismo , Saccharomycetales/genética , Biomassa , Técnicas de Cultura Celular por Lotes , Polissacarídeos/metabolismo , Polissacarídeos/biossínteseRESUMO
PURPOSE: Simultaneous membrane-based feeding and monitoring of the oxygen transfer rate shall be introduced to the newly established perforated ring flask, which consists of a cylindrical glass flask with an additional perforated inner glass ring, for rapid bioprocess development. METHODS: A 3D-printed adapter was constructed to enable monitoring of the oxygen transfer rate in the perforated ring flasks. Escherichia coli experiments in batch were performed to validate the adapter. Fed-batch experiments with different diffusion rates and feed solutions were performed. RESULTS: The adapter and the performed experiments allowed a direct comparison of the perforated ring flasks with Erlenmeyer flasks. In batch cultivations, maximum oxygen transfer capacities of 80 mmol L-1 h-1 were reached with perforated ring flasks, corresponding to a 3.5 times higher capacity than in Erlenmeyer flasks. Fed-batch experiments with a feed reservoir concentration of 500 g glucose L-1 were successfully conducted. Based on the oxygen transfer rate, an ammonium limitation could be observed. By adding 40 g ammonium sulfate L-1 to the feed reservoir, the limitation could be prevented. CONCLUSION: The membrane-based feeding, an online monitoring technique, and the perforated ring flask were successfully combined and offer a new and promising tool for screening and process development in biotechnology.
Assuntos
Técnicas de Cultura Celular por Lotes , Reatores Biológicos , Escherichia coli , Fermentação , Oxigênio , Escherichia coli/metabolismo , Oxigênio/metabolismo , Técnicas de Cultura Celular por Lotes/métodos , Glucose/metabolismo , Difusão , Impressão TridimensionalRESUMO
Microbial bioproduction of the aromatic acid anthranilate (ortho-aminobenzoate) has the potential to replace its current, environmentally demanding production process. The host organism employed for such a process needs to fulfil certain demands to achieve industrially relevant product levels. As anthranilate is toxic for microorganisms, the use of particularly robust production hosts can overcome issues from product inhibition. The microorganisms Corynebacterium glutamicum and Pseudomonas putida are known for high tolerance towards a variety of chemicals and could serve as promising platform strains. In this study, the resistance of both wild-type strains towards anthranilate was assessed. To further enhance their native tolerance, adaptive laboratory evolution (ALE) was applied. Sequential batch fermentation processes were developed, adapted to the cultivation demands for C. glutamicum and P. putida, to enable long-term cultivation in the presence of anthranilate. Isolation and analysis of single mutants revealed phenotypes with improved growth behaviour in the presence of anthranilate for both strains. The characterization and improvement of both potential hosts provide an important basis for further process optimization and will aid the establishment of an industrially competitive method for microbial synthesis of anthranilate.
Assuntos
Corynebacterium glutamicum/metabolismo , Pseudomonas putida/metabolismo , ortoaminobenzoatos/metabolismo , Adaptação Fisiológica , Reatores Biológicos , Corynebacterium glutamicum/genética , Corynebacterium glutamicum/crescimento & desenvolvimento , Evolução Molecular Direcionada , Microbiologia Industrial , Mutação , Pseudomonas putida/genética , Pseudomonas putida/crescimento & desenvolvimentoRESUMO
Cell line generation of mammalian cells is a time-consuming and labor-intensive process, especially because of challenges in clone selection after transfection. Antibiotics are common selection agents for mammalian cells due to their simplicity of use. However, the optimal antibiotic concentration must be determined with a kill curve experiment before clone selection starts. The traditional kill curve experiments are resource-intensive and time-consuming due to necessary sampling and offline analysis effort. This study, thus, explores the potential of online monitoring the oxygen transfer rate (OTR), as a non-invasive and efficient alternative for kill curve experiments. The OTR is monitored using the Transfer-rate Online Measurement (TOM) system and the micro(µ)-scale Transfer-rate Online Measurement (µTOM) device, which was used for mammalian cells first. It could be shown that the OTR curves for both devices align perfectly, affirming consistent cultivation conditions. The µTOM device proves effective in performing kill curve experiments in 96-deep-well plates without the need for sampling and offline analysis. The streamlined approach reduces medium consumption by 95%, offering a cost-effective and time-efficient solution for kill curve experiments. The study validates the generalizability of the method by applying it to two different CHO cell lines (CHO-K1 and sciCHO) with two antibiotics (puromycin and hygromycin B) each. In conclusion, the broad application of OTR online monitoring for CHO cell cultures in 96-deep-well plates is highlighted. The µTOM device proves as a valuable tool for high-throughput experiments, paving the way for diverse applications, such as media and clone screening, cytotoxicity tests, and scale-up experiments.
RESUMO
BACKGROUND: An important step in replacing petrochemical products with sustainable, cost-effective alternatives is the use of feedstocks other than, e.g., pure glucose in the fermentative production of platform chemicals. Ustilaginaceae offer the advantages of a wide substrate spectrum and naturally produce a versatile range of value-added compounds under nitrogen limitation. A promising candidate is the dicarboxylic acid malic acid, which may be applied as an acidulant in the food industry, a chelating agent in pharmaceuticals, or in biobased polymer production. However, fermentable residue streams from the food and agricultural industry with high nitrogen content, e.g., sugar beet molasses, are unsuited for processes with Ustilaginaceae, as they result in low product yields due to high biomass and low product formation. RESULTS: This study uncovers challenges in evaluating complex feedstock applicability for microbial production processes, highlighting the role of secondary substrate limitations, internal storage molecules, and incomplete assimilation of these substrates. A microliter-scale screening method with online monitoring of microbial respiration was developed using malic acid production with Ustilago trichophora on molasses as an application example. Investigation into nitrogen, phosphate, sulphate, and magnesium limitations on a defined minimal medium demonstrated successful malic acid production under nitrogen and phosphate limitation. Furthermore, a reduction of nitrogen and phosphate in the elemental composition of U. trichophora was revealed under the respective secondary substrate limitation. These adaptive changes in combination with the intricate metabolic response hinder mathematical prediction of product formation and make the presented screening methodology for complex feedstocks imperative. In the next step, the screening was transferred to a molasses-based complex medium. It was determined that the organism assimilated only 25% and 50% of the elemental nitrogen and phosphorus present in molasses, respectively. Due to the overall low content of bioavailable phosphorus in molasses, the replacement of the state-of-the-art nitrogen limitation was shown to increase malic acid production by 65%. CONCLUSION: The identification of phosphate as a superior secondary substrate limitation for enhanced malic acid production opens up new opportunities for the effective utilization of molasses as a more sustainable and cost-effective substrate than, e.g., pure glucose for biobased platform chemical production.
RESUMO
This article details a risk-based methodology designed to assign environmental classifications to the different operations in biopharmaceutical facilities manufacturing non-sterile (low bioburden) drug substance. Generally, environmental conditions for active pharmaceutical ingredient manufacture are established based on previous experiences or expectations or on extrapolated interpretations of current good manufacturing practices guidelines. Improvements in equipment design and operation, especially the use of closed systems, allow certain process steps to take place in controlled environment areas rather than in classified clean rooms. However, the design of facilities has not developed to reflect these technological advancements. The result is that facility designs are more complex with multiple environmental classifications, resulting in far higher capital and operational costs than necessary given the current technology and understanding. The authors propose a formal risk assessment-based methodology that is applicable in the early design phase of new facilities and facilitates the fast selection of the environmental conditions required for the different process steps. The risk assessment describes the risk to product quality or patient safety from environmental contamination, and this is expressed in terms of impact, probability, and detectability. The assessment considers growth potential in terms of time, nutrients, and temperature; bioburden limit; level of closure of the system; and the ability of the process to detect contamination to assign an environmental classification. Because closure is a key factor in the methodology, the authors propose a practical definition of closed systems, building on existing International Society for Pharmaceutical Engineering guidance. A fundamental of the assessment is that closed system operations only require controlled not classified environments, and any increase in classification does nothing further to protect the product. Results of the assessment are discussed in relation to a variety of process steps in different operating scenarios, to demonstrate how the assessment is applied. The methodology strongly supports the implementation of closed systems and demonstrates the limited need for classified areas. With fewer classified rooms, companies can reduce the complexity of facility layout and save costs without compromising patient safety or product quality.
Assuntos
Produtos Biológicos , Tecnologia Farmacêutica , Contaminação de Medicamentos/prevenção & controle , Indústria Farmacêutica , Desenho de Equipamento , HumanosRESUMO
The intracellular concentrations of the valine and leucine pathway intermediates in a Corynebacterium glutamicum strain were measured during a transient state. The data were obtained by performing a glucose stimulus-response experiment with the use of a rapid sampling device and advanced mass spectrometry. The glucose stimulus resulted in a 3-fold increase in the intracellular pyruvate concentration within less than a second, demonstrating the very fast interactions in metabolic networks. The samples were taken at subsecond intervals for a time period of 25 s. The time courses of the metabolite concentrations formed the experimental basis of a mathematical model simulating the fluxes and concentrations in the valine/leucine pathway. The implementation of a model selection criterion based on the second law of thermodynamics is demonstrated to be essential for the identification of realistic and unique models. Large differences between the enzyme properties determined in vitro and those determined in vivo by the model were observed with the in vivo maximal rates being almost an order of magnitude larger than the in vitro maximal rates. The transamination of ketoisovalerate (KIV) to valine is carried out mainly by the transaminase B enzyme, with the transaminase C enzyme playing a minor role. The availability of the cofactors NADP and NADPH only has modest influence on the flux through the valine pathway, while the influence of NAD and NADH on the flux through the leucine pathway is negligible.
Assuntos
Corynebacterium glutamicum/metabolismo , Leucina/biossíntese , Leucina/química , Modelos Biológicos , Valina/biossíntese , Valina/química , Corynebacterium glutamicum/química , Cinética , Leucina/metabolismo , Termodinâmica , Fatores de Tempo , Valina/metabolismoRESUMO
To maintain or strengthen their market position, biopharmaceutical producers have to adapt their production facilities to a drastically changed market environment. Contrary to currently used large scale batch-wise operated production facilities, where stainless steel equipment is widely applied, small scale and flexible production processes are desired. Consequently, the concept of the "biofacility of the future" has been developed, which combines the attributes fast, flexible, small, inexpensive and sustainable. Four design principles build the facility's basis and are presented within this work: continuous processing, 100% single-use equipment, closed processing and adopting the ballroom concept. However, no publication presents a completely continuously operated platform process for the production of monoclonal antibodies up to now. Therefore, this work establishes the proof of concept regarding continuous antibody manufacturing. A pilot plant for the production of monoclonal antibodies has been built 100% in single-use equipment. It was operated fully continuous and automated in the upstream and the downstream part. The concepts that allow continuously operating the pilot plant are presented within this work, i.e., continuously operated filtration, continuously operated viral inactivation, continuously operated chromatography and a continuously operated formulation. Analytics showed that the produced product was within specification limits of industrial bulk drug substances.
Assuntos
Anticorpos Monoclonais/biossíntese , Biotecnologia , Indústria Farmacêutica , Arquitetura de Instituições de Saúde , Cromatografia , Filtração , Concentração de Íons de Hidrogênio , Proteína Estafilocócica A/química , Inativação de VírusRESUMO
The enzyme targets for the rational optimization of a Corynebacterium glutamicum strain constructed for valine production are identified by analyzing the control of flux in the valine/leucine pathway. The control analysis is based on measurements of the intracellular metabolite concentrations and on a kinetic model of the reactions in the investigated pathway. Data-driven and model-based methods are used and evaluated against each other. The approach taken gives a quantitative evaluation of the flux control and it is demonstrated how the understanding of flux control is used to reach specific recommendations for strain optimization. The flux control coefficients (FCCs) with respect to the valine excretion rate were calculated, and it was found that the control is distributed mainly between the acetohydroxyacid synthase enzyme (FCC = 0.32), the branched chain amino acid transaminase (FCC = 0.27), and the exporting translocase (FCC = 0.43). The availability of the precursor pyruvate has substantial influence on the valine flux, whereas the cometabolites are less important as demonstrated by the calculation of the respective response coefficients. The model is further used to make in-silico predictions of the change in valine flux following a change in enzyme level. A doubling of the enzyme level of valine translocase will result in an increase in valine flux of 31%. By optimizing the enzyme levels with respect to valine flux it was found that the valine flux can be increased by a factor 2.5 when the optimal enzyme levels are implemented.
Assuntos
Proteínas de Bactérias/química , Proteínas de Bactérias/metabolismo , Corynebacterium glutamicum/enzimologia , Modelos Biológicos , Valina/metabolismo , Proteínas de Bactérias/genética , Corynebacterium glutamicum/química , Corynebacterium glutamicum/genética , Corynebacterium glutamicum/metabolismo , CinéticaRESUMO
BACKGROUND: To understand the dynamic behavior of cellular systems, mathematical modeling is often necessary and comprises three steps: (1) experimental measurement of participating molecules, (2) assignment of rate laws to each reaction, and (3) parameter calibration with respect to the measurements. In each of these steps the modeler is confronted with a plethora of alternative approaches, e. g., the selection of approximative rate laws in step two as specific equations are often unknown, or the choice of an estimation procedure with its specific settings in step three. This overall process with its numerous choices and the mutual influence between them makes it hard to single out the best modeling approach for a given problem. RESULTS: We investigate the modeling process using multiple kinetic equations together with various parameter optimization methods for a well-characterized example network, the biosynthesis of valine and leucine in C. glutamicum. For this purpose, we derive seven dynamic models based on generalized mass action, Michaelis-Menten and convenience kinetics as well as the stochastic Langevin equation. In addition, we introduce two modeling approaches for feedback inhibition to the mass action kinetics. The parameters of each model are estimated using eight optimization strategies. To determine the most promising modeling approaches together with the best optimization algorithms, we carry out a two-step benchmark: (1) coarse-grained comparison of the algorithms on all models and (2) fine-grained tuning of the best optimization algorithms and models. To analyze the space of the best parameters found for each model, we apply clustering, variance, and correlation analysis. CONCLUSION: A mixed model based on the convenience rate law and the Michaelis-Menten equation, in which all reactions are assumed to be reversible, is the most suitable deterministic modeling approach followed by a reversible generalized mass action kinetics model. A Langevin model is advisable to take stochastic effects into account. To estimate the model parameters, three algorithms are particularly useful: For first attempts the settings-free Tribes algorithm yields valuable results. Particle swarm optimization and differential evolution provide significantly better results with appropriate settings.