Hydroelectric Plant Safety: Real-Time Monitoring Utilizing Fiber-Optic Sensors.

In the context of hydroelectric plants, this article emphasizes the imperative of robust monitoring strategies. The utilization of fiber-optic sensors (FOSs) emerges as a promising approach due to their efficient optical transmission, minimal signal attenuation, and resistance to electromagnetic interference. These optical sensors have demonstrated success in diverse structures, including bridges and nuclear plants, especially in challenging environments. This article culminates with the depiction of the development of an array of sensors featuring Fiber Bragg Gratings (FBGs). This array is designed to measure deformation and temperature in protective grids surrounding the turbines at the Santo Antônio Hydroelectric Plant. Implemented in a real-world scenario, the device identifies deformation peaks, indicative of water flow obstructions, thereby contributing significantly to the safety and operational efficiency of the plant.

Dynamic Optimization and Heuristics Based Online Coverage Path Planning in 3D Environment for UAVs.

Path planning is one of the most important issues in the robotics field, being applied in many domains ranging from aerospace technology and military tasks to manufacturing and agriculture. Path planning is a branch of autonomous navigation. In autonomous navigation, dynamic decisions about the path have to be taken while the robot moves towards its goal. Among the navigation area, an important class of problems is Coverage Path Planning (CPP). The CPP technique is associated with determining a collision-free path that passes through all viewpoints in a specific area. This paper presents a method to perform CPP in 3D environment for Unmanned Aerial Vehicles (UAVs) applications, namely 3D dynamic for CPP applications (3DD-CPP). The proposed method can be deployed in an unknown environment through a combination of linear optimization and heuristics. A model to estimate cost matrices accounting for UAV power usage is proposed and evaluated for a few different flight speeds. As linear optimization methods can be computationally demanding to be used on-board a UAV, this work also proposes a distributed execution of the algorithm through fog-edge computing. Results showed that 3DD-CPP had a good performance in both local execution and fog-edge for different simulated scenarios. The proposed heuristic is capable of re-optimization, enabling execution in environments with local knowledge of the environments.

A Framework for Coverage Path Planning Optimization Based on Point Cloud for Structural Inspection.

Different practical applications have emerged in the last few years, requiring periodic and detailed inspections to verify possible structural changes. Inspections using Unmanned Aerial Vehicles (UAVs) should minimize flight time due to battery time restrictions and identify the terrain's topographic features. In this sense, Coverage Path Planning (CPP) aims at finding the best path to coverage of a determined area respecting the operation's restrictions. Photometric information from the terrain is used to create routes or even refine paths already created. Therefore, this research's main contribution is developing a methodology that uses a metaheuristic algorithm based on point cloud data to inspect slope and dams structures. The technique was applied in a simulated and real scenario to verify its effectiveness. The results showed an increasing 3D reconstructions' quality observing optimizing photometric and mission time criteria.

A Robotic Cognitive Architecture for Slope and Dam Inspections.

Big construction enterprises, such as electrical power generation dams and mining slopes, demand continuous visual inspections. The sizes of these structures and the necessary level of detail in each mission requires a conflicting set of multi-objective goals, such as performance, quality, and safety. It is challenging for human operators, or simple autonomous path-following drones, to process all this information, and thus, it is common that a mission must be repeated several times until it succeeds. This paper deals with this problem by developing a new cognitive architecture based on a collaborative environment between the unmanned aerial vehicles (UAVs) and other agents focusing on optimizing the data gathering, information processing, and decision-making. The proposed architecture breaks the problem into independent units ranging from sensors and actuators up to high-level intelligence processes. It organizes the structures into data and information; each agent may request an individual behavior from the system. To deal with conflicting behaviors, a supervisory agent analyzes all requests and defines the final planning. This architecture enables real-time decision-making with intelligent social behavior among the agents. Thus, it is possible to process and make decisions about the best way to accomplish the mission. To present the methodology, slope inspection scenarios are shown.

Deep Learning Applied to Vegetation Identification and Removal Using Multidimensional Aerial Data.

When performing structural inspection, the generation of three-dimensional (3D) point clouds is a common resource. Those are usually generated from photogrammetry or through laser scan techniques. However, a significant drawback for complete inspection is the presence of covering vegetation, hiding possible structural problems, and making difficult the acquisition of proper object surfaces in order to provide a reliable diagnostic. Therefore, this research's main contribution is developing an effective vegetation removal methodology through the use of a deep learning structure that is capable of identifying and extracting covering vegetation in 3D point clouds. The proposed approach uses pre and post-processing filtering stages that take advantage of colored point clouds, if they are available, or operate independently. The results showed high classification accuracy and good effectiveness when compared with similar methods in the literature. After this step, if color is available, then a color filter is applied, enhancing the results obtained. Besides, the results are analyzed in light of real Structure From Motion (SFM) reconstruction data, which further validates the proposed method. This research also presented a colored point cloud library of bushes built for the work used by other studies in the field.

Sensors Fusion and Multidimensional Point Cloud Analysis for Electrical Power System Inspection.

Thermal inspection is a powerful tool that enables the diagnosis of several components at its early stages. One critical aspect that influences thermal inspection outputs is the infrared reflection from external sources. This situation may change the readings, demanding that an expert correctly define the camera position, which is a time consuming and expensive operation. To mitigate this problem, this work proposes an autonomous system capable of identifying infrared reflections by filtering and fusing data obtained from both stereo and thermal cameras. The process starts by acquiring readings from multiples Observation Points (OPs) where, at each OP, the system processes the 3D point cloud and thermal image by fusing them together. The result is a dense point cloud where each point has its spatial position and temperature. Considering that each point's information is acquired from multiple poses, it is possible to generate a temperature profile of each spatial point and filter undesirable readings caused by interference and other phenomena. To deploy and test this approach, a Directional Robotic System (DRS) is mounted over a traditional human-operated service vehicle. In that way, the DRS autonomously tracks and inspects any desirable equipment as the service vehicle passes them by. To demonstrate the results, this work presents the algorithm workflow, a proof of concept, and a real application result, showing improved performance in real-life conditions.

A novel sEMG data augmentation based on WGAN-GP.

The classification of sEMG signals is fundamental in applications that use mechanical prostheses, making it necessary to work with generalist databases that improve the accuracy of those classifications. Therefore, synthetic signal generation can be beneficial in enriching a database to make it more generalist. This work proposes using a variant of generative adversarial networks to produce synthetic biosignals of sEMG. A convolutional neural network (CNN) was used to classify the movements. The results showed good performance with an increase of 4.07% in a set of movement classification accuracy when 200 synthetic samples were included for each movement. We compared our results to other methodologies, such as Magnitude Warping and Scaling. Both methodologies did not have the same performance in the classification.

Unmanned aerial vehicle for transmission line inspection using an extended Kalman filter with colored electromagnetic interference.

Strong electromagnetic fields such as those generated by power stations and transmission lines cause disturbances that affect the on-board sensors of an autonomous unmanned aerial vehicles (AUAVs) and may lead to aircraft instability. To mitigate this effect, we use an extended Kalman filter with colored noise. In addition to the traditional aircraft dynamics, this approach considers the electromagnetic fields of transmission lines and their position, electrical current, and tower topology. In this way, the filter can predict and correct the interference in the aircraft sensors, thereby guaranteeing flight stability even when the AUAV is very close to the electromagnetic sources. This approach enables the AUAV to operate closer to the transformers and transmission lines, thereby paving the way for better autonomous inspection performed by electrical companies and further development of new technologies. To prove the effectiveness of this approach, theoretical and practical results involving a survey of transmission lines are demonstrated.