Hindered dialkyl ether synthesis with electrogenerated carbocations.

Hindered ethers are of high value for various applications; however, they remain an underexplored area of chemical space because they are difficult to synthesize via conventional reactions1,2. Such motifs are highly coveted in medicinal chemistry, because extensive substitution about the ether bond prevents unwanted metabolic processes that can lead to rapid degradation in vivo. Here we report a simple route towards the synthesis of hindered ethers, in which electrochemical oxidation is used to liberate high-energy carbocations from simple carboxylic acids. These reactive carbocation intermediates, which are generated with low electrochemical potentials, capture an alcohol donor under non-acidic conditions; this enables the formation of a range of ethers (more than 80 have been prepared here) that would otherwise be difficult to access. The carbocations can also be intercepted by simple nucleophiles, leading to the formation of hindered alcohols and even alkyl fluorides. This method was evaluated for its ability to circumvent the synthetic bottlenecks encountered in the preparation of 12 chemical scaffolds, leading to higher yields of the required products, in addition to substantial reductions in the number of steps and the amount of labour required to prepare them. The use of molecular probes and the results of kinetic studies support the proposed mechanism and the role of additives under the conditions examined. The reaction manifold that we report here demonstrates the power of electrochemistry to access highly reactive intermediates under mild conditions and, in turn, the substantial improvements in efficiency that can be achieved with these otherwise-inaccessible intermediates.

Bicyclo[m.n.k]alkane Building Blocks as Promising Benzene and Cycloalkane Isosteres: Multigram Synthesis, Physicochemical and Structural Characterization.

Electrophilic double bond functionalization - intramolecular enolate alkylation sequence was used to obtain a series of bridged and fused bicyclo[m.n.k]alkane derivatives (i. e., bicyclo[4.1.1]octanes, bicyclo[2.2.1]heptanes, bicyclo[3.2.1]octanes, bicyclo[3.1.0]hexanes, and bicyclo[4.2.0]heptanes). The scope and limitations of the method were established, and applicability to the multigram synthesis of target bicyclic compounds was illustrated. Using the developed protocols, over 50 mono- and bifunctional building blocks relevant to medicinal chemistry were prepared. The synthesized compounds are promising isosteres of benzene and cycloalkane rings, which is confirmed by their physicochemical and structural characterization (pKa , LogP, and exit vector parameters (EVP)). "Rules of thumb" for the upcoming isosteric replacement studies were proposed.

2-Oxabicyclo[2.1.1]hexanes: Synthesis, Properties, and Validation as Bioisosteres of ortho- and meta-Benzenes.

We have developed a general and practical approach towards 2-oxabicyclo[2.1.1]hexanes with two and three exit vectors via an iodocyclization reaction. The obtained compounds have been easily converted into the corresponding building blocks for use in medicinal chemistry. 2-Oxabicyclo[2.1.1]hexanes have been incorporated into the structure of five drugs and three agrochemicals, and validated biologically as bioisosteres of ortho- and meta-benzenes.

Spiro[3.3]heptane as a Saturated Benzene Bioisostere.

The spiro[3.3]heptane core, with the non-coplanar exit vectors, was shown to be a saturated benzene bioisostere. This scaffold was incorporated into the anticancer drug sonidegib (instead of the meta-benzene), the anticancer drug vorinostat (instead of the phenyl ring), and the anesthetic drug benzocaine (instead of the para-benzene). The patent-free saturated analogs obtained showed a high potency in the corresponding biological assays.

Nickel-Electrocatalytic Decarboxylative Arylation to Access Quaternary Centers.

There is a pressing need, particularly in the field of drug discovery, for general methods that will enable direct coupling of tertiary alkyl fragments to (hetero)aryl halides. Herein a uniquely powerful and simple set of conditions for achieving this transformation with unparalleled generality and chemoselectivity is disclosed. This new protocol is placed in context with other recently reported methods, applied to simplify the routes of known bioactive building blocks molecules, and scaled up in both batch and flow. The role of pyridine additive as well as the mechanism of this reaction are interrogated through Cyclic Voltammetry studies, titration experiments, control reactions with Ni(0) and Ni(II)-complexes, and ligand optimization data. Those studies indicate that the formation of a BINAPNi(0) is minimized and the formation of an active pyridine-stabilized Ni(I) species is sustained during the reaction. Our preliminary mechanistic studies ruled out the involvement of Ni(0) species in this electrochemical cross-coupling, which is mediated by Ni(I) species via a Ni(I)-Ni(II)-Ni(III)-Ni(I) catalytic cycle.

General and Scalable Approach to Trifluoromethyl-Substituted Cyclopropanes.

CF3-cyclopropanes with aliphatic, aromatic, and even heteroaromatic substituents were prepared on a multigram scale by deoxyfluorination of cyclopropane carboxylic acids or their salts with sulfur tetrafluoride. For labile α-pyridine acetic acids, only the use of their potassium salts allowed to obtain the needed products. Derivatization of CF3-cyclopropanes into building blocks ready for direct use in medicinal chemistry was performed.

Fluorinated Aliphatic Diazirines: Preparation, Characterization, and Model Photolabeling Studies.

The previously unknown difluoromethyl diazirines and the previously neglected trifluoromethyl-aliphatic diazirines were synthesized and characterized. Model photolabeling experiments and biological studies showed that these compounds could indeed be used as photoaffinity labels.

Fluorinated Pyrazoles: From Synthesis to Applications.

Fluorinated pyrazoles play an important role in medicinal chemistry, drug discovery, agrochemistry, coordination chemistry, and organometallic chemistry. Since the early 1990s, their popularity has grown exponentially. Moreover, more than 50% of all contributions on the topic have been published in the last 5 years. In this review, analysis of novel synthetic approaches to fluorinated pyrazoles that appeared in recent years is performed. A particular emphasis is devoted to a detailed consideration of reaction mechanisms. In addition, the reasons that have led to the ever-increasing popularity of fluorinated pyrazoles in various areas of science are discussed. At the end of the review, several potentially interesting but yet mostly unknown classes of fluorinated pyrazoles are outlined.

C-H Activation of Unbiased C(sp3 )-H Bonds: Gold(I)-Catalyzed Cycloisomerization of 1-Bromoalkynes.

Selective functionalization of non-activated C(sp3 )-H bonds is a major challenge in chemistry, so functional groups are often used to enhance reactivity. Here, we present a gold(I)-catalyzed C(sp3 )-H activation of 1-bromoalkynes without any sort of electronic, or conformational bias. The reaction proceeds regiospecifically and stereospecifically to the corresponding bromocyclopentene derivatives. The latter can be readily modified, comprising an excellent library of diverse 3D scaffolds for medicinal chemistry. In addition, a mechanistic study has shown that the reaction proceeds via a so far unknown mechanism: a concerted [1,5]-H shift / C-C bond formation involving a gold-stabilized vinylcation-like transition state.

Rapid and Scalable Halosulfonylation of Strain-Release Reagents.

Sulfonylated aromatics are commonplace motifs in drugs and agrochemicals. However, methods for the direct synthesis of sulfonylated non-classical arene bioisosteres, which could improve the physicochemical properties of drug and agrochemical candidates, are limited. Here we report a solution to this challenge: a one-pot halosulfonylation of [1.1.1]propellane, [3.1.1]propellane and bicyclo[1.1.0]butanes that proceeds under practical, scalable and mild conditions. The sulfonyl halides used in this chemistry feature aryl, heteroaryl and alkyl substituents, and are conveniently generated in situ from readily available sulfinate salts and halogen atom sources. This methodology enables the synthesis of an array of pharmaceutically and agrochemically relevant halogen/sulfonyl-substituted bioisosteres and cyclobutanes, on up to multidecagram scale.

General Synthesis of 3-Azabicyclo[3.1.1]heptanes and Evaluation of Their Properties as Saturated Isosteres.

A general approach to 3-azabicyclo[3.1.1]heptanes by reduction of spirocyclic oxetanyl nitriles was developed. The mechanism, scope, and scalability of this transformation were studied. The core was incorporated into the structure of the antihistamine drug Rupatidine instead of the pyridine ring, which led to a dramatic improvement in physicochemical properties.

1-Azaspiro[3.3]heptane as a Bioisostere of Piperidine.

1-Azaspiro[3.3]heptanes were synthesized, characterized, and validated biologically as bioisosteres of piperidine. The key synthesis step was thermal [2+2] cycloaddition between endocyclic alkenes and the Graf isocyanate, ClO2 S-NCO, to give spirocyclic ß-lactams. Reduction of the ß-lactam ring with alane produced 1-azaspiro[3.3]heptanes. Incorporation of this core into the anesthetic drug bupivacaine instead of the piperidine fragment resulted in a new patent-free analogue with high activity.

Overcoming Limitations in Decarboxylative Arylation via Ag-Ni Electrocatalysis.

A useful protocol for achieving decarboxylative cross-coupling (DCC) of redox-active esters (RAE, isolated or generated in situ) and halo(hetero)arenes is reported. This pragmatically focused study employs a unique Ag-Ni electrocatalytic platform to overcome numerous limitations that have plagued this strategically powerful transformation. In its optimized form, coupling partners can be combined in a surprisingly simple way: open to the air, using technical-grade solvents, an inexpensive ligand and Ni source, and substoichiometric AgNO3, proceeding at room temperature with a simple commercial potentiostat. Most importantly, all of the results are placed into context by benchmarking with state-of-the-art methods. Applications are presented that simplify synthesis and rapidly enable access to challenging chemical space. Finally, adaptation to multiple scale regimes, ranging from parallel milligram-based synthesis to decagram recirculating flow is presented.

Fluorine-Containing Prolines: Synthetic Strategies, Applications, and Opportunities.

Fluorinated prolines play an important role in peptide studies, protein engineering, medicinal chemistry, drug discovery, and agrochemistry. Since the first synthesis of 4-fluoroprolines by Gottlieb and Witkop in 1965, their popularity started to grow exponentially. For example, during the past two decades, all isomeric trifluoromethyl-substituted prolines have been synthesized. In this Perspective, chemical properties and applications of fluorinated prolines are discussed. Synthetic approaches to all known fluorine-containing prolines are also discussed and analyzed. This analysis unexpectedly revealed an unsolved problem: in strict contrast to fluoro- and trifluoromethyl-substituted prolines, the corresponding analogues with fluoromethyl and difluoromethyl groups are mostly unknown. At the end of the paper, structures of several interesting, yet unknown, fluorinated prolines are disclosed─a good opportunity for chemists to make them.

2,2,2-Trifluorodiazoethane (CF3CHN2): A Long Journey since 1943.

2,2,2-Trifluorodiazoethane (CF3CHN2) has been proven to be a valuable reagent for the rapid synthesis of various classes of trifluoromethyl-substituted organic molecules in both academic and industrial research. The reagent was prepared first in 1943, but only recently it received a great attention from the scientific community. Protocols for in situ generation, in flow generation, and crystalline analogues of CF3CHN2 were developed during the past decade and have led to an ever-increasing number of publications on the topic. The current review summarizes and comprehensively analyzes all manuscripts in a peer-reviewed literature on 2,2,2-trifluorodiazoethane since its discovery in 1943 until today (as of 19 June 2020). These include contributions mostly overseen by scientific community before. A particular emphasis of this review is to classify the existing reactivity modes of CF3CHN2 and to systematically analyze the corresponding reaction mechanisms in details. At the end of this review, several undeveloped areas for CF3CHN2 are outlined, based on the overseen precedents in the literature.

A Practical and Scalable Approach to Fluoro-Substituted Bicyclo[1.1.1]pentanes.

After more than 20 years of trials, a practical scalable approach to fluoro-substituted bicyclo[1.1.1]pentanes (F-BCPs) has been developed. The physicochemical properties of the F-BCPs have been studied, and the core was incorporated into the structure of the anti-inflammatory drug Flurbiprofen in place of the fluorophenyl ring.

Arylboration of Enecarbamates for the Synthesis of Borylated Saturated N-Heterocycles.

Two catalytic systems have been developed for the arylboration of endocyclic enecarbamates to deliver synthetically versatile borylated saturated N-heterocycles in good regio- and diastereoselectivities. A Cu/Pd dual catalytic reaction enables the synthesis of borylated, α-arylated azetidines, while a Ni-catalysed arylboration reaction efficiently functionalizes 5-, 6-, and 7-membered enecarbamates. In the case of the Cu/Pd-system, a remarkable additive effect was identified that allowed for broader scope. The products are synthetically useful, as demonstrated by manipulations of the boronic ester to access biologically active compounds.

Large-Scale Synthesis and Modifications of Bicyclo[1.1.1]pentane-1,3-dicarboxylic Acid (BCP).

In flow photochemical addition of propellane to diacetyl allowed construction of the bicyclo[1.1.1]pentane (BCP) core in a 1 kg scale within 1 day. Haloform reaction of the formed diketone in batch afforded bicyclo[1.1.1]pentane-1,3-dicarboxylic acid in a multigram amount. Representative gram scale transformations of the diacid were also performed to obtain various BCP-containing building blocks-alcohols, acids, amines, trifluoroborates, amino acids, etc.-for medicinal chemistry.

Scalable Approach to Fluorinated Heterocycles with Sulfur Tetrafluoride (SF4).

A general approach to fluorinated (hetero)aromatic derivatives is elaborated. The key reaction is a deoxofluorination of substituted acetophenones with sulfur tetrafluoride (SF4). In contrast to previous deoxofluorination methods, this transformation is fast, scalable (up to 70 g), and high-yielding. More than 100 novel or previously hardly accessible fluorinated heterocycles, interesting for medicinal chemistry and agrochemistry, were synthesized.

Bicyclic Piperidines via [2 + 2] Photocycloaddition.

A synthetic strategy to fused bicyclic piperidines-building blocks for medicinal chemistry-is developed. The key step was an intramolecular [2 + 2]-photocyclization. The photochemical step was performed on a gram scale. Crystallographic analysis of the obtained compounds revealed that they occupy a novel chemical space and can be considered as elongated analogues of 3-substituted piperidines.