RESUMO
Structural Health Monitoring (SHM) systems allow three types of diagnostic tasks to be performed, namely damage identification, loads monitoring, and damage prognosis. Only if all three tasks are correctly fulfilled can the useful remaining life of a structure be estimated credibly. This paper deals with the second task and aimed to extend state-of-the-art in load identification, by demonstrating that it is feasible to achieve it through the analysis of response signals captured with high-speed three-dimensional Digital Image Correlation (HS 3D-DIC). The efficacy of the proposed procedure is demonstrated experimentally on a frame structure under broadband vibration excitation. Full-field vibration displacement signals are captured with the use of two high-speed cameras and processed with 3D-DIC. Loads are identified with two different algorithms based on inverting the Frequency Response Function (FRF) matrix and modal filtration (MF). The paper discusses both methods providing their theoretical background and experimental performance.
Assuntos
Algoritmos , Imageamento Tridimensional , Imageamento Tridimensional/métodos , Vibração , EletrocardiografiaRESUMO
Evidence of the ability to probe depth information of stress corrosion cracking (SCC) are presented using the time reversed elastic nonlinearity diagnostic (TREND). Depth estimation of SCC is important to determine when a stainless steel canister has been breached. TREND is a method to focus elastic energy to a point in space in order to probe that point for damage and its' depth penetration is used here to study depth information about SCC. High frequencies are used to probe near the surface, while low frequencies are used to probe deeper into a stainless steel section of a cylinder.
RESUMO
The nonlinear interaction of longitudinal vibration and ultrasound in beams with cracks is investigated. The central focus is on the localization effect of this interaction, i.e., the locally enhanced nonlinear vibro-acoustic modulation. Both numerical and experimental investigations are undertaken. The finite element (FE) method is used to investigate different crack models, including the bi-linear crack, open crack, and breathing crack. A parametric study is performed considering different crack depths, locations, and boundary conditions in a two-dimensional beam model. The study shows that observed nonlinearities (i.e., nonlinear crack-wave modulations) are particularly strong in the vicinity of the crack, allowing not only for crack localization but also for the separation of the crack-induced nonlinearity from other sources of nonlinearity.
RESUMO
The paper presents an approach to efficiently detect local defect resonances (LDRs) in solids with localized defects. The 3D scanning laser Doppler vibrometry (3D SLDV) technique is applied to acquire vibration responses on the surface of a test sample due to a broadband vibration excitation applied by a piezoceramic transducer and modal shaker. Based on the response signals and known excitation, the frequency characteristics for individual response points are determined. The proposed algorithm then processes these characteristics to extract both out-of-plane and in-plane LDRs. Identification is based on calculating the ratio between local vibration levels and the mean vibration level of the structure as a background. The proposed procedure is verified on simulated data obtained from finite element (FE) simulations and validated experimentally for an equivalent test scenario. The obtained results confirmed the effectiveness of the method in identifying in-plane and out-of-plane LDRs for both numerical and experimental data. The results of this study are important for damage detection techniques utilizing LDRs to enhance the efficiency of detection.
RESUMO
This paper presents experimental results demonstrating the increase in ultrasonic radiation obtained from a wedge of cubic profile relative to a plate of uniform thickness. The wedge of cubic profile provides high efficiency sound radiation matching layer from a mounted piezoelectric transducer into the surrounding air. Previous research on structures with indentations of power-law profile has focused on vibration mitigation using the so called "acoustic black-hole" effect, whereas here such structures are used to enhance ultrasonic radiation. The work provides experimental verification of the numerical results of Remillieux et al. (2014).