RESUMO
In this paper, we present the development of a photonic biosensor device for cancer treatment monitoring as a complementary diagnostics tool. The proposed device combines multidisciplinary concepts from the photonic, nano-biochemical, micro-fluidic and reader/packaging platforms aiming to overcome limitations related to detection reliability, sensitivity, specificity, compactness and cost issues. The photonic sensor is based on an array of six asymmetric Mach Zender Interferometer (aMZI) waveguides on silicon nitride substrates and the sensing is performed by measuring the phase shift of the output signal, caused by the binding of the analyte on the functionalized aMZI surface. According to the morphological design of the waveguides, an improved sensitivity is achieved in comparison to the current technologies (<5000 nm/RIU). This platform is combined with a novel biofunctionalization methodology that involves material-selective surface chemistries and the high-resolution laser printing of biomaterials resulting in the development of an integrated photonics biosensor device that employs disposable microfluidics cartridges. The device is tested with cancer patient blood serum samples. The detection of periostin (POSTN) and transforming growth factor beta-induced protein (TGFBI), two circulating biomarkers overexpressed by cancer stem cells, is achieved in cancer patient serum with the use of the device.
Assuntos
Técnicas Biossensoriais , Neoplasias , Humanos , Interferometria , Neoplasias/diagnóstico , Neoplasias/terapia , Óptica e Fotônica , Fótons , Reprodutibilidade dos TestesRESUMO
In this paper, we present the immobilization of thiol-modified aptamers on alkyne- or alkene-terminated silicon nitride surfaces by laser-induced click chemistry reactions. The aptamers are printed onto the surface by laser-induced forward transfer (LIFT), which also induces the covalent bonding of the aptamers by thiol-ene or thiol-yne reactions that occur upon UV irradiation of the thiol-modified aptamers with ns laser pulses. This combination of LIFT and laser-induced click chemistry allows the creation of high-resolution patterns without the need for masks. Whereas the click chemistry already takes place during the printing process (single-step process) by the laser pulse used for the printing process, further irradiation of the LIFT-printed aptamers by laser pulses (two-step process) leads to a further increase in the immobilization efficiency.
RESUMO
We report the formation of covalently bound alkyl layers onto oxidized Pt (PtOx) substrates by reaction with 1-alkenes as a novel way to bind organic molecules to metal surfaces. The organic layers were characterized by static contact angle, infrared reflection absorption spectroscopy (IRRAS), X-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). The grafted alkyl layers display a hydrolytic stability that is comparable to that of alkyl thiols on Au. PtOx-alkene attachment is compatible with terminal ester moieties enabling further anchoring of functional groups, such as redox-active ferrocene, and thus has great potential to extend monolayer chemistry on noble metals.
RESUMO
Detection elements play a key role in analyte recognition in biosensors. Therefore, detection elements with high analyte specificity and binding strength are required. While antibodies (Abs) have been increasingly used as detection elements in biosensors, a key challenge remains - the immobilization on the biosensor surface. This minireview highlights recent approaches to immobilize and study Abs on surfaces. We first introduce Ab species used as detection elements, and discuss techniques recently used to elucidate Ab orientation by determination of layer thickness or surface topology. Then, several immobilization methods will be presented: non-covalent and covalent surface attachment, yielding oriented or random coupled Abs. Finally, protein modification methods applicable for oriented Ab immobilization are reviewed with an eye to future application.
Assuntos
Anticorpos Imobilizados/química , Técnicas Biossensoriais/métodos , Animais , Técnicas Biossensoriais/instrumentação , Humanos , Interferometria , Microscopia de Força Atômica , Difração de Nêutrons , Conformação Proteica , Espectrometria de Massa de Íon Secundário , Propriedades de SuperfícieRESUMO
The Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2) pandemic has once more emphasized the urgent need for accurate and fast point-of-care (POC) diagnostics for outbreak control and prevention. The main challenge in the development of POC in vitro diagnostics (IVD) is to combine a short time to result with a high sensitivity, and to keep the testing cost-effective. In this respect, sensors based on photonic integrated circuits (PICs) may offer advantages as they have features such as a high analytical sensitivity, capability for multiplexing, ease of miniaturization, and the potential for high-volume manufacturing. One special type of PIC sensor is the asymmetric Mach-Zehnder Interferometer (aMZI), which is characterized by a high and tunable analytical sensitivity. The current work describes the application of an aMZI-based biosensor platform for sensitive and multiplex detection of anti-SARS-CoV-2 antibodies in human plasma samples using the spike protein (SP), the receptor-binding domain (RBD), and the nucleocapsid protein (NP) as target antigens. The results are in good agreement with several CE-IVD marked reference methods and demonstrate the potential of the aMZI biosensor technology for further development into a photonic IVD platform.
Assuntos
Técnicas Biossensoriais , COVID-19 , Anticorpos Antivirais , Técnicas Biossensoriais/métodos , COVID-19/diagnóstico , Humanos , Interferometria , Pandemias , SARS-CoV-2RESUMO
Inhalational anthrax, a zoonotic disease caused by the inhalation of Bacillus anthracis spores, has a â¼50% fatality rate even when treated with antibiotics. Pathogenesis is dependent on the activity of two toxic noncovalent complexes: edema toxin (EdTx) and lethal toxin (LeTx). Protective antigen (PA), an essential component of both complexes, binds with high affinity to the major receptor mediating the lethality of anthrax toxin in vivo, capillary morphogenesis protein 2 (CMG2). Certain antibodies against PA have been shown to protect against anthrax in vivo. As an alternative to anti-PA antibodies, we produced a fusion of the extracellular domain of human CMG2 and human IgG Fc, using both transient and stable tobacco plant expression systems. Optimized expression led to the CMG2-Fc fusion protein being produced at high levels: 730 mg/kg fresh leaf weight in Nicotiana benthamiana and 65 mg/kg in N. tabacum. CMG2-Fc, purified from tobacco plants, fully protected rabbits against a lethal challenge with B. anthracis spores at a dose of 2 mg/kg body weight administered at the time of challenge. Treatment with CMG2-Fc did not interfere with the development of the animals' own immunity to anthrax, as treated animals that survived an initial challenge also survived a rechallenge 30 days later. The glycosylation of the Fc (or lack thereof) had no significant effect on the protective potency of CMG2-Fc in rabbits or on its serum half-life, which was about 5 days. Significantly, CMG2-Fc effectively neutralized, in vitro, LeTx-containing mutant forms of PA that were not neutralized by anti-PA monoclonal antibodies.
Assuntos
Antraz/imunologia , Fragmentos Fc das Imunoglobulinas/imunologia , Fragmentos Fc das Imunoglobulinas/metabolismo , Nicotiana/metabolismo , Receptores de Peptídeos/imunologia , Receptores de Peptídeos/metabolismo , Proteínas Recombinantes de Fusão/imunologia , Proteínas Recombinantes de Fusão/metabolismo , Animais , Humanos , Fragmentos Fc das Imunoglobulinas/genética , Coelhos , Receptores de Peptídeos/genética , Proteínas Recombinantes de Fusão/genética , Nicotiana/genéticaRESUMO
The preparation and characterization of self-assembled monolayers on copper with n-alkyl and functional thiols was investigated. Well-ordered monolayers were obtained, while the copper remained oxide-free. Direct attachment of N-succinimidyl mercaptoundecanoate (NHS-MUA) onto the copper surface allowed for the successful attachment of biomolecules, such as ß-d-glucosamine, the tripeptide glutathione, and biotin. Notably, the copper surfaces remained oxide-free even after two reaction steps. All monolayers were characterized by static water contact angle measurements, X-ray photoelectron spectroscopy, and infrared reflection absorption spectroscopy. In addition, the biotinylated copper surfaces were employed in the immobilization of biomolecules such as streptavidin.
Assuntos
Álcoois/química , Ácidos Carboxílicos/química , Cobre/química , Membranas Artificiais , Succinimidas/química , Compostos de Sulfidrila/química , Estrutura Molecular , Tamanho da Partícula , Estreptavidina/química , Propriedades de SuperfícieRESUMO
Sensitivity of biosensors depends on the orientation of bio-receptors on the sensor surface. The objective of this study was to organize bio-receptors on surfaces in a way that their analyte binding site is exposed to the analyte solution. VHH proteins recognizing foot-and-mouth disease virus (FMDV) were used for making biosensors, and azides were introduced in the VHH to function as bioorthogonal reactive groups. The importance of the orientation of bio-receptors was addressed by comparing sensors with randomly oriented VHH (with multiple exposed azide groups) to sensors with uniformly oriented VHH (with only a single azide group). A surface plasmon resonance (SPR) chip exposing cyclooctyne was reacted to azide functionalized VHH domains, using click chemistry. Comparison between randomly and uniformly oriented bio-receptors showed up to 800-fold increase in biosensor sensitivity. This technique may increase the containment of infectious diseases such as FMDV as its strongly enhanced sensitivity may facilitate early diagnostics.
Assuntos
Anticorpos Antivirais/imunologia , Técnicas Biossensoriais/instrumentação , Camelídeos Americanos/imunologia , Vírus da Febre Aftosa/imunologia , Vírus da Febre Aftosa/isolamento & purificação , Imunoensaio/instrumentação , Ressonância de Plasmônio de Superfície/instrumentação , Animais , Desenho de Equipamento , Análise de Falha de Equipamento , Conformação Proteica , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Uniform orientation of capture molecules on biosensors has been reported to increase sensitivity. Here it is investigated which analyte properties contribute to sensitivity by orientation. Orientation of capture molecules on biosensors was investigated using variable domains of llama heavy-chain antibodies (VHHs) as capture molecule, and a surface plasmon resonance (SPR) chip as biosensor. Two VHHs were tested in this study: one recognizing foot-and-mouth disease virus (FMDV) and another recognizing the 16 kDa heat-shock protein of Mycobacterium tuberculosis. SPR chips with randomly immobilized biotinylated VHHs were compared to streptavidin-coated SPR chips, on which similar quantities of oriented biotinylated VHHs were non-covalently immobilized. Analytes that differ in molecular weight, epitope number and epitope affinity were compared using the FMDV-recognizing VHH. When binding of intact FMDV particles (146 S; 8200 kDa) or pentameric FMDV coat protein aggregates (12 S; 282 kDa) was detected, a modest (1-2-fold) increase in sensitivity was observed. When a 26-residue peptide (3 kDa) containing the epitope for VHH recognition was tested, much larger effects of capture molecule orientation (14-fold) on signal were observed. A 20-227-fold improvement was also observed when the epitope peptide was covalently linked to bovine serum albumin (67 kDa) or R-phycoerythrin (240 kDa). The results indicate that orientation of the capture molecule hardly affects high-affinity interactions, while it leads to strong improvements in sensitivity for lower-affinity interactions.
Assuntos
Antígenos/análise , Antígenos/química , Técnicas Biossensoriais/instrumentação , Imunoensaio/instrumentação , Desenho de Equipamento , Análise de Falha de Equipamento , Conformação Proteica , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
BACKGROUND: The 16 kDa heat shock protein (HSP) is an immuno-dominant antigen, used in diagnosis of infectious Mycobacterium tuberculosis (M.tb.) causing tuberculosis (TB). Its use in serum-based diagnostics is limited, but for the direct identification of M.tb. bacteria in sputum or cultures it may represent a useful tool. Recently, a broad set of twelve 16 kDa specific heavy chain llama antibodies (VHH) has been isolated, and their utility for diagnostic applications was explored. METHODOLOGY/PRINCIPAL FINDINGS: To identify the epitopes recognized by the nine (randomly selected from a set of twelve 16 kDa specific VHH antibodies) distinct VHH antibodies, 14 overlapping linear epitopes (each 20 amino acid long) were characterized using direct and sandwich ELISA techniques. Seven out of 14 epitopes were recognized by 8 out of 9 VHH antibodies. The two highest affinity binders B-F10 and A-23 were found to bind distinct epitopes. Sandwich ELISA and SPR experiments showed that only B-F10 was suitable as secondary antibody with both B-F10 and A-23 as anchoring antibodies. To explain this behavior, the epitopes were matched to the putative 3D structure model. Electrospray ionization time-of-flight mass spectrometry and size exclusion chromatography were used to determine the higher order conformation. A homodimer model best explained the differential immunological reactivity of A-23 and B-F10 against heat-treated M.tb. lysates. CONCLUSIONS/SIGNIFICANCE: The concentrations of secreted antigens of M.tb. in sputum are too low for immunological detection and existing kits are only used for identifying M.tb. in cultures. Here we describe how specific combinations of VHH domains could be used to detect the intracellular HSP antigen. Linked to methods of pre-concentrating M.tb. cells prior to lysis, HSP detection may enable the development of protein-based diagnostics of sputum samples and earlier diagnosis of diseases.
Assuntos
Proteínas de Bactérias/metabolismo , Camelídeos Americanos , Proteínas de Choque Térmico/metabolismo , Temperatura Alta , Cadeias Pesadas de Imunoglobulinas/imunologia , Mycobacterium tuberculosis/isolamento & purificação , Multimerização Proteica , Sequência de Aminoácidos , Animais , Especificidade de Anticorpos , Proteínas de Bactérias/química , Proteínas de Bactérias/imunologia , Mapeamento de Epitopos , Proteínas de Choque Térmico/química , Proteínas de Choque Térmico/imunologia , Modelos Moleculares , Dados de Sequência Molecular , Peso Molecular , Mycobacterium tuberculosis/imunologia , Mycobacterium tuberculosis/metabolismo , Mycobacterium tuberculosis/fisiologia , Fragmentos de Peptídeos/química , Fragmentos de Peptídeos/imunologia , Estrutura Quaternária de Proteína , Escarro/microbiologia , Tuberculose/diagnósticoRESUMO
BACKGROUND: Recombinant antibodies are powerful tools in engineering of novel diagnostics. Due to the small size and stable nature of llama antibody domains selected antibodies can serve as a detection reagent in multiplexed and sensitive assays for M. tuberculosis. METHODOLOGY/PRINCIPAL FINDINGS: Antibodies for Mycobacterium tuberculosis (M. tb) recognition were raised in Alpaca, and, by phage display, recombinant variable domains of heavy-chain antibodies (VHH) binding to M. tuberculosis antigens were isolated. Two phage display selection strategies were followed: one direct selection using semi-purified protein antigen, and a depletion strategy with lysates, aiming to avoid cross-reaction to other mycobacteria. Both panning methods selected a set of binders with widely differing complementarity determining regions. Selected recombinant VHHs were produced in E. coli and shown to bind immobilized lysate in direct Enzymelinked Immunosorbent Assay (ELISA) tests and soluble antigen by surface plasmon resonance (SPR) analysis. All tested VHHs were specific for tuberculosis-causing mycobacteria (M. tuberculosis, M. bovis) and exclusively recognized an immunodominant 16 kDa heat shock protein (hsp). The highest affinity VHH had a dissociation constant (KD) of 4 × 10(-10) M. CONCLUSIONS/SIGNIFICANCE: A broad set of different llama antibodies specific for 16 kDa heat shock protein of M. tuberculosis is available. This protein is highly stable and abundant in M. tuberculosis. The VHH that detect this protein are applied in a robust SPR sensor for identification of tuberculosis-causing mycobacteria.