Overcoming Solubility Challenges: Liposomal isoCoQ-Carbazole as a Promising Anti-Tumor Agent for Inoperable and Radiation-Insensitive cancers.

This study evaluated the potential of isoCoQ-Carbazole, a diheterocyclic analog of isoCA-4, as an anti-tumor agent. To overcome its low aqueous solubility, liposomes were developed as a delivery system for the compound. In vitro experiments showed that loaded liposomes exhibited similar activity to the free form on multiple human tumor cell lines. In vivo experiments using a palliative intratumoral injection chemotherapy approach further demonstrated that isoCoQ-Carbazole loaded liposomes significantly reduced tumor growth in a CA-4-resistant HT29 cell model, without inducing any observable toxicity or weight loss in the treated mice. These findings suggest that liposomal isoCoQ-Carbazole may hold promise as a potential therapeutic agent for the treatment of inoperable, radiation-insensitive cancers.

Amphiphilic Phosphorus Dendrons Associated with Anti-inflammatory siRNA Reduce Symptoms in Murine Collagen-Induced Arthritis.

Small interfering RNA (siRNA) holds promise for treating rheumatoid arthritis by inhibiting major cytokines such as tumor necrosis factor-α (TNF-α). We developed original cationic amphiphilic phosphorus dendrons to produce dendriplexes associated with TNF-α siRNA. The dendrons were made of 10 pyrrolidinium end groups and a C17 aliphatic chain. The dendriplexes demonstrated the ability to protect siRNA from nuclease degradation and to promote macrophage uptake. Moreover, they led to potent inhibition of TNF-α expression in the lipopolysaccharide-activated mouse macrophage cell line RAW264.7 in vitro model. A significant anti-inflammatory effect in the murine collagen-induced arthritis model was observed through arthritis scoring and histological observations. These results open up essential perspectives in using this original amphiphilic dendron to reduce the disease burden and improve outcomes in chronic inflammatory diseases.

A Polymer Prodrug Strategy to Switch from Intravenous to Subcutaneous Cancer Therapy for Irritant/Vesicant Drugs.

Chemotherapy is almost exclusively administered via the intravenous (IV) route, which has serious limitations (e.g., patient discomfort, long hospital stays, need for trained staff, high cost, catheter failures, infections). Therefore, the development of effective and less costly chemotherapy that is more comfortable for the patient would revolutionize cancer therapy. While subcutaneous (SC) administration has the potential to meet these criteria, it is extremely restrictive as it cannot be applied to most anticancer drugs, such as irritant or vesicant ones, for local toxicity reasons. Herein, we report a facile, general, and scalable approach for the SC administration of anticancer drugs through the design of well-defined hydrophilic polymer prodrugs. This was applied to the anticancer drug paclitaxel (Ptx) as a worst-case scenario due to its high hydrophobicity and vesicant properties (two factors promoting necrosis at the injection site). After a preliminary screening of well-established polymers used in nanomedicine, polyacrylamide (PAAm) was chosen as a hydrophilic polymer owing to its greater physicochemical, pharmacokinetic, and tumor accumulation properties. A small library of Ptx-based polymer prodrugs was designed by adjusting the nature of the linker (ester, diglycolate, and carbonate) and then evaluated in terms of rheological/viscosity properties in aqueous solutions, drug release kinetics in PBS and in murine plasma, cytotoxicity on two different cancer cell lines, acute local and systemic toxicity, pharmacokinetics and biodistribution, and finally their anticancer efficacy. We demonstrated that Ptx-PAAm polymer prodrugs could be safely injected subcutaneously without inducing local toxicity while outperforming Taxol, the commercial formulation of Ptx, thus opening the door to the safe transposition from IV to SC chemotherapy.

Liposomes Loaded with Everolimus and Coated with Hyaluronic Acid: A Promising Approach for Lung Fibrosis.

Chronic lung allograft dysfunction (CLAD) and interstitial lung disease associated with collagen tissue diseases (CTD-ILD) are two end-stage lung disorders in which different chronic triggers induce activation of myo-/fibroblasts (LFs). Everolimus, an mTOR inhibitor, can be adopted as a potential strategy for CLAD and CTD-ILD, however it exerts important side effects. This study aims to exploit nanomedicine to reduce everolimus side effects encapsulating it inside liposomes targeted against LFs, expressing a high rate of CD44. PEGylated liposomes were modified with high molecular weight hyaluronic acid and loaded with everolimus (PEG-LIP(ev)-HA400kDa). Liposomes were tested by in vitro experiments using LFs derived from broncholveolar lavage (BAL) of patients affected by CLAD and CTD-ILD, and on alveolar macrophages (AM) and lymphocytes isolated, respectively, from BAL and peripheral blood. PEG-LIP-HA400kDa demonstrated to be specific for LFs, but not for CD44-negative cells, and after loading everolimus, PEG-LIP(ev)-HA400kDa were able to arrest cell cycle arrest and to decrease phospho-mTOR level. PEG-LIP(ev)-HA400kDa showed anti-inflammatory effect on immune cells. This study opens the possibility to use everolimus in lung fibrotic diseases, demonstrating that our lipids-based vehicles can vehicle everolimus inside cells exerting the same drug molecular effect, not only in LFs, but also in immune cells.

Nanoscale Lipophilic Prodrugs of Dexamethasone with Enhanced Pharmacokinetics.

The encapsulation of glucocorticoids, such as dexamethasone, in nanoparticles (NPs) faces two main issues: a low drug loading and the destabilization of the nanoparticle suspension due to drug crystallization. Here, we successfully formulated a prodrug of dexamethasone, dexamethasone palmitate (DXP), into nanoparticles stabilized by the sole presence of distearoyl- sn-glycero-3-phosphoethanolamine- N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG2000). Two formulation processes, nanoprecipitation and emulsion-evaporation, allowed the formation of stable nanoparticles. By adjusting the drug/lipid ratio and the DXP concentration, nanoparticles of DXP (DXP-NPs) with a size between 130 and 300 nm can be obtained. Owing to the presence of DSPE-PEG2000, a high drug entrapment efficiency of 98% w/w was reached for both processes, corresponding to a very high equivalent dexamethasone drug loading of around 50% w/w in the absence of crystallization upon storage at 4 °C. The anti-inflammatory activity of DXP-NPs was preserved when incubated with macrophages activated with lipopolysaccharide. Pharmacokinetics parameters were evaluated after intravenous (IV) injection of DXP-NPs to healthy mice. The release of DXM from DXP-NPs in plasma was clearly controlled up to 18 h compared with the free drug, which was rapidly eliminated from plasma after administration. In conclusion, a novel type of nanoparticle combining the advantages of prodrugs and nanoparticles was designed, easy to produce with a high loading efficiency and leading to modified pharmacokinetics and tissue distribution after IV administration.

Bare and Sterically Stabilized PLGA Nanoparticles for the Stabilization of Pickering Emulsions.

Pickering emulsions were formulated using biodegradable and biocompatible poly(lactic- co-glycolic acid) (PLGA) nanoparticles (NPs) prepared without surfactants or any other polymer than PLGA. A pharmaceutical and cosmetic oil (Miglyol) was chosen as the oil phase at a ratio of 10% w/w. These emulsions were then compared with emulsions using the same oil but formulated with well-described PLGA-poly(vinyl alcohol) (PVA) NPs, i.e., with PVA as NP stabilizers. Strikingly, the emulsions demonstrated very different structures at macroscopic, microscopic, and interfacial scales, depending on the type of NPs used. Indeed, the emulsion layer was significantly thicker when using PLGA NPs rather than PLGA-PVA NPs. This was attributed to the formation and coexistence of multiple water-in-oil-in-water (W/O/W) and simple oil-in-water (O/W) droplets, using a single step of emulsification, whereas simple O/W emulsions were obtained with PLGA-PVA NPs. The latter NPs were more hydrophilic than bare PLGA NPs because of the presence of PVA at their surface. Moreover, PLGA NPs only slightly lowered the oil/water interfacial tension whereas the decrease was more pronounced with PLGA-PVA NPs. The PVA chains at the PLGA-PVA NP surface could probably partially desorb from the NPs and adsorb at the interface, inducing the interfacial tension decrease. Finally, independent of their composition, NPs were adsorbed at the oil/water interface without influencing its rheological behavior, possibly due to their mobility at their interface. This work has direct implications in the formulation of Pickering emulsions and stresses the paramount influence of the physicochemical nature of the NP surface into the stabilization of these systems.

Comb-Like Fluorophilic-Lipophilic-Hydrophilic Polymers for Nanocapsules as Ultrasound Contrast Agents.

Imaging the enhanced permeation and retention effect by ultrasound is hindered by the large size of commercial ultrasound contrast agents (UCAs). To obtain nanosized UCAs, triblock copolymers of poly(ethylene glycol)-polylactide-poly(1 H,1 H,2 H,2 H-heptadecafluorodecyl methacrylate) (PEG-PLA-PFMA) with distinct numbers of perfluorinated pendant chains (5, 10, or 20) are synthesized by a combination of ring-opening polymerization and atom transfer radical polymerization. Nanocapsules (NCs) containing perfluorooctyl bromide (PFOB) intended as UCAs are obtained with a 2-fold increase in PFOB encapsulation efficiency in fluorinated NCs as compared with plain PEG-PLA NCs thanks to fluorous interactions. NC morphology is strongly influenced by the number of perfluorinated chains and the amount of polymer used for formulation, leading to peculiar capsules with several PFOB cores at high PEG-PLA-PFMA20 amount and single-cored NCs with a thinner shell at low fluorinated polymer amount, as confirmed by small-angle neutron scattering. Finally, fluorinated NCs yield higher in vitro ultrasound signal compared with PEG-PLA NCs, and no in vitro cytotoxicity is induced by fluorinated polymers and their degradation products. Our results highlight the benefit of adding comb-like fluorinated blocks in PEG-PLA polymers to modify the nanostructure and enhance the echogenicity of nanocapsules intended as UCAs.

Anti-Inflammatory Effect of Anti-TNF-α SiRNA Cationic Phosphorus Dendrimer Nanocomplexes Administered Intranasally in a Murine Acute Lung Injury Model.

Inflammation is an essential component of many lung diseases, including asthma, chronic obstructive pulmonary disease (COPD), or acute lung injury. Our purpose was to design efficient carriers for lung delivery of small interfering RNA (siRNA) targeting tumor necrosis factor (TNF-α) in an acute lung injury model. To achieve this goal, two different types of phosphorus-based dendrimers with either pyrrolidinium or morpholinium as terminal protonated amino groups were selected for their better biocompatibility compared to other dendrimers. Dendriplexes containing pyrrolidinium surface groups demonstrated a stronger siRNA complexation, a higher cellular uptake, and enhanced in vitro silencing efficiency of TNF-α in the lipopolysaccharide (LPS)-activated mouse macrophage cell line RAW264.7, compared to morpholinium-containing dendriplexes. The better performance of the pyrrolidium dendriplexes was attributed to their higher pKa value leading to a stronger siRNA complexation and improved protection against enzymatic degradation resulting in a higher cellular uptake. The superior silencing effect of the pyrrolidinium dendriplexes, compared to noncomplexed siRNA, was confirmed in vivo in an LPS-induced murine model of short-term acute lung injury upon lung delivery via nasal administration. These data suggest that phosphorus dendriplexes have a strong potential in lung delivery of siRNA for treating inflammatory lung diseases.

Pulmonary Surfactant Protein A-Mediated Enrichment of Surface-Decorated Polymeric Nanoparticles in Alveolar Macrophages.

Surfactant protein A (SP-A), a lung anti-infective protein, is a lectin with affinity for sugars found on fungal and micrococcal surfaces such as mannose. We synthesized a mannosylated poly(lactic acid)-poly(ethylene glycol) (PLA-PEG) copolymer and used it to produce nanoparticles with a polyester (PLGA/PLA) core and a PEG shell decorated with mannose residues, designed to be strongly associated with SP-A for an increased uptake by alveolar macrophages. Nanoparticles made of the copolymers were obtained by nanoprecipitation and displayed a size of around 140 nm. The presence of mannose on the surface was demonstrated by zeta potential changes according to pH and by a strong aggregation in the presence of concanavalin A. Mannosylated nanoparticles bound to SP-A as demonstrated by dynamic light scattering and transmission electron microscopy. The association with SP-A increased nanoparticle uptake by THP-1 macrophages in vitro. In vivo experiments demonstrated that after intratracheal administration of nanoparticles with or without SP-A, SP-A-coated mannosylated nanoparticles were internalized by alveolar macrophages in greater proportion than SP-A-coated nonmannosylated nanoparticles. The data demonstrate for the first time that the pool of nanoparticles available to lung cells can be changed after surface modification, using a biomimetic approach.

AFM Investigation of Liquid-Filled Polymer Microcapsules Elasticity.

Elasticity of polymer microcapsules (MCs) filled with a liquid fluorinated core is studied by atomic force microscopy (AFM). Accurately characterized spherical tips are employed to obtain the Young's moduli of MCs having four different shell thicknesses. We show that those moduli are effective ones because the samples are composites. The strong decrease of the effective MC elasticity (from 3.0 to 0.1 GPa) as the shell thickness decreases (from 200 to 10 nm) is analyzed using a novel numerical approach. This model describes the evolution of the elasticity of a coated half-space according to the contact radius, the thickness of the film, and the elastic moduli of bulk materials. This numerical model is consistent with the experimental data and allows simulating the elastic behavior of MCs at high frequencies (5 MHz). While the quasi-static elasticity of the MCs is found to be very dependent on the shell thickness, the high frequency (5 MHz) elastic behavior of the core leads to a stable behavior of the MCs (from 2.5 to 3 GPa according to the shell thickness). Finally, the effect of thermal annealing on the MCs elasticity is investigated. The Young's modulus is found to decrease because of the reduction of the shell thickness due to the loss of the polymer.

Supramolecular Organization and siRNA Binding of Hyaluronic Acid-Coated Lipoplexes for Targeted Delivery to the CD44 Receptor.

The dynamics of the formation of siRNA-lipoplexes coated with hyaluronic acid (HA) and the parameters influencing their supramolecular organization were studied. The insertion of a HA-dioleylphosphatidylethanolamine (DOPE) conjugate in the liposome structure as well as subsequent complexation with siRNA increased the liposome size. Lipoplexes were around 110 nm at high ± charge ratios with a zeta potential around +50 mV and around 230 nm at low ± ratios, with a zeta potential that decreased to negative values, reaching -45 mV. The addition of the conjugate did not compromise siRNA binding to liposomes, although these nucleic acids induced a displacement of part of the HA-DOPE conjugate upon lipoplex formation, as confirmed by capillary electrophoresis. Isothermal titration calorimetry, X-ray diffraction studies, and cryo-TEM microscopy demonstrated that in addition to electrostatic interactions with siRNA a rearrangement of the lipid bilayers takes place, resulting in condensed oligolamellar vesicles. This phenomenon is dependent on the number of siRNA molecules and the degree of modification with HA. Finally, the suitable positioning of HA on the lipoplex surface and its ability to bind specifically to the CD44 receptors in a concentration-dependent manner was demonstrated by surface plasmon resonance analysis.

Formulation and pharmacokinetics of thermosensitive stealth® liposomes encapsulating 5-Fluorouracil.

PURPOSE: We optimize the encapsulation and investigate the pharmacokinetics of 5-Fluorouracil (5-FU) delivered by thermosensitive stealth(®) liposomes (TSLs) designed to trigger drug release upon hyperthermia using focused ultrasound (FUS). METHODS: 5-FU was encapsulated into liposomes made of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol/1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-PEG2000 either as a free molecule or complexed with copper-polyethylenimine. Heat-triggered drug release was evaluated using either a water bath or FUS. Formulation cytotoxicity was assessed on HT-29 cell line by MTS assay. Pharmacokinetics and biodistribution of 5-FU were evaluated in HT-29-tumor bearing mice. RESULTS: 5-FU was easily encapsulated using the lipid hydration method (encapsulation efficacy of 13%) but poorly retained upon dilution. 5-FU complexation with copper-polyethylenimine improved 5-FU retention into liposomes and allowed to obtain an encapsulation efficacy of 37%. At 42°C, heat-triggered 5-FU release from TSLs was 63% using a water bath and 68% using FUS, within 10 min, whereas it remained below 20% for the non-thermosensitive formulation. The MTS assay revealed that formulation toxicity arose from 5-FU and not from the excipients. In addition, 5-FU complex encapsulation into TSLs induces a reduction of the IC50 from 115 down to 49 µM. Pharmacokinetics reveals a longer circulation of encapsulated 5-FU and a more important body exposure, although tumor passive targeting is not significantly higher than free 5-FU. CONCLUSIONS: Complexation of 5-FU with copper-polyethylenimine appears an interesting strategy to improve 5-FU retention into TSLs in vitro and in vivo. TSLs allow heat-triggered release of the drug within 10 min at 42°C, a reasonable time for future in vivo experiments.

Properties of theranostic nanoparticles determined in suspension by ultrasonic spectroscopy.

In the context of growing use of nanoparticles, it is important to be able to characterize all their physical properties in order to understand their behavior, to optimize them, and to control their quality. We showed that ultrasonic spectroscopy provides many of the desired properties. To do so, we used as an example nanocapsules made of a polymer shell encaspulating a liquid perfluorocarbon core and designed them for theranostic applications. Frequency-dependent measurements of both ultrasound velocity and attenuation were performed on nanocapsule suspensions. Then the desired properties were extracted by analyzing the experimental data using a recently developed model that relates the speed of sound and attenuation of a suspension to the geometrical and viscoelastic properties of the nanocapsules.

Focused ultrasound influence on calcein-loaded thermosensitive stealth liposomes.

Focused ultrasound (FUS) is a versatile technology for non-invasive thermal therapies in oncology. Indeed, this technology has great potential for local heat-mediated drug delivery from thermosensitive liposomes (TSLs), thus improving therapeutic efficacy and reducing toxicity profiles. In the present study we evaluated the influence of FUS parameters on the release of calcein from TSLs used to model a hydrophilic drug. Quantitative calcein release from TSLs (DPPC/CHOL/DSPE-PEG2000: 90/5/5) and non-thermosensitive liposomes (NTSLs) (DPPC/CHOL/DSPE-PEG2000: 65/30/5) was measured by spectrofluorimetry after both water bath and FUS-induced in vitro heating. The heating of TSLs at 42 °C in a water bath resulted in a maximum calcein release of 45%. No additional calcein release was observed at temperatures above 42 °C. A similar percentage of calcein release was achieved when TSLs were exposed to 1 MHz sinusoidal waves at peak negative pressure of 1.5 MPa, 40% duty cycle, for 10 min (i.e. above 42 °C). No release was detected when NTSLs were heated in a water bath. For both TSLs and NTSLs, the calcein release was increased by more than 10% for acoustic pressures ranging from 1.5 MPa to 2 MPa. This additional release was attributed to the mechanical stress generated by FUS, which was sufficient to disrupt the liposomal membrane. Furthermore, analysis of cryo-TEM images showed a significant decrease in liposome size (14%) induced by the thermal effect, whereas the liposome diameter remained unaffected by the FUS-triggered non-thermal effects.

Poly(malic acid)-budesonide nanoconjugates embedded in microparticles for lung administration.

To improve the therapeutic activity of inhaled glucocorticoids and reduce potential side effects, we designed a formulation combining the advantages of nanoparticles, which have an enhanced uptake by alveolar cells, allow targeted delivery and sustained drug release, as well as limited drug systemic passage, with those of microparticles, which display good alveolar deposition. Herein, a polymer-drug conjugate, poly(malic acid)-budesonide (PMAB), was first synthesized with either 11, 20, 33, or 43 mol% budesonide (drug:polymer from 1:8 to 3:4), the drug creating hydrophobic domains. The obtained conjugates self-assemble into nanoconjugates in water, yielding excellent drug loading of up to 73 wt%, with 80-100 nm diameters. In vitro assays showed that budesonide could be steadily released from the nanoconjugates, and the anti-inflammatory activity was preserved, as evidenced by reduced cytokine production in LPS-activated RAW 264.7 macrophages. Nanoconjugates were then embedded into microparticles through spray-drying with L-leucine, forming nano-embedded microparticles (NEMs). NEMs were produced with an aerodynamic diameter close to 1 µm and a density below 0.1 g.cm-3, indicative of a high alveolar deposition. NEMs spray-dried with the less hydrophobic nanoconjugates, PMAB 1:4, were readily dissolved in simulated lung fluid and were chosen for in vivo experiments to study pharmacokinetics in healthy rats. As it was released in vivo from NEMs, sustained distribution of budesonide was obtained for 48 h in lung tissue, cells, and lining fluid. With high loading rates, modulable release kinetics, and low cytotoxicity, these nanoconjugates delivered by NEMs are promising for the more efficient treatment of pulmonary inflammatory diseases.

Liposomal AntagomiR-155-5p Restores Anti-Inflammatory Macrophages and Improves Arthritis in Preclinical Models of Rheumatoid Arthritis.

OBJECTIVE: We previously reported an increased expression of microRNA-155 (miR-155) in the blood monocytes of patients with rheumatoid arthritis (RA) that could be responsible for impaired monocyte polarization to anti-inflammatory M2-like macrophages. In this study, we employed two preclinical models of RA, collagen-induced arthritis and K/BxN serum transfer arthritis, to examine the therapeutic potential of antagomiR-155-5p entrapped within PEGylated (polyethylene glycol [PEG]) liposomes in resolution of arthritis and repolarization of monocytes towards the anti-inflammatory M2 phenotype. METHODS: AntagomiR-155-5p or antagomiR-control were encapsulated in PEG liposomes of 100 nm in size and -10 mV in zeta potential with high antagomiR loading efficiency (above 80%). Mice were injected intravenously with 1.5 nmol/100 µL PEG liposomes containing antagomiR-155-5p or control after the induction of arthritis. RESULTS: We demonstrated the biodistribution of fluorescently tagged PEG liposomes to inflamed joints one hour after the injection of fluorescently tagged PEG liposomes, as well as the liver's subsequent accumulation after 48 hours, indicative of hepatic clearance, in mice with arthritis. The injection of PEG liposomes containing antagomiR-155-5p decreased arthritis score and paw swelling compared with PEG liposomes containing antagomiR-control or the systemic delivery of free antagomiR-155-5p. Moreover, treatment with PEG liposomes containing antagomiR-155-5p led to the restoration of bone marrow monocyte defects in anti-inflammatory macrophage differentiation without any significant functional change in other immune cells, including splenic B and T cells. CONCLUSION: The injection of antagomiR-155-5p encapsulated in PEG liposomes allows the delivery of small RNA to monocytes and macrophages and reduces joint inflammation in murine models of RA, providing a promising strategy in human disease.

Successful factorial design for the optimization of methylprednisolone encapsulation in biodegradable nanoparticles.

Due to their crystalline nature, the encapsulation of hydrophobic corticosteroids within polymeric nanoparticles by o/w solvent evaporation method is often difficult to achieve. The aim of this study was to evaluate the effect of both process and formulation parameters on the encapsulation of a model corticosteroid: methylprednisolone (MP). For this purpose, a 3(2)factorial design was performed evaluating the effects of the concentration of emulsifiers and sonication time on the manufactured nanoparticles, followed by a multiresponse optimization. The study also included the evaluation of other parameters such as the type of organic solvent used, polymer characteristics and the initial mass of drug. The optimal nanoparticle formulation using 0.25% (w/v) of emulsifying agent (Polyvinyl-alcohol, PVA) and 5 min of sonication was then characterized. The highest encapsulation was obtained with an organic phase consisting of acetone: dichloromethane (1:1), polyD,L-lactide-co-glycolide (PLGA) 50:50 as polymer and an initial mass of 6.6 mg of methylprednisolone. Nanoparticles size and ζ potential of optimized formulation were respectively around 230 nm and -14 mV. Differential scanning calorimetry (DSC) and X-ray diffraction (XRD) demonstrated that the drug was molecularly dispersed within the nanoparticles. Release study showed that MP-loaded nanoparticles sustained drug release for up to 120 h. This study reflects the importance of factorial design to optimize the manufacture of nanoparticles encapsulating hydrophobic drugs.

Emerging nanoparticle platforms to improve the administration of glucocorticoids.

Glucocorticoids (GC) are common drugs used to treat acute and chronic inflammatory diseases, whose prolonged use can result in severe side effects hampering their efficacy. In addition, the pharmacokinetics, and biodistribution of GC are inadequate to support high efficacy with reduced toxicity. Following the marketing of GC prodrugs, new GC prodrug entities, and conjugates, have been developed. These new prodrugs and conjugates have been administered in free form or under a nanoparticulate form for local or systemic administration. These nanoparticles from lipid prodrugs and nanoconjugates change the paradigm of GC delivery, solving the issue of low drug loading into nanoparticles and circumventing the potential burst release effect by allowing a more controlled delivery of the GC and better targeting in inflammatory sites. This review highlights the design strategies, recent advances in GC prodrugs and conjugates, and their delivery in nanoparticulate form, demonstrating the strong potentialities of these novel strategies.

Modulation of release and pharmacokinetics from nanoscale lipid prodrugs of dexamethasone with variable linkage chemistry.

In an attempt to tune drug release and subsequent pharmacokinetics once administered intravenously, we have synthesized three lipid-drug conjugates (LDCs) of dexamethasone (DXM) each possessing a different lipid-drug chemical linkage: namely ester, carbamate and carbonate. These LDCs were thoroughly characterized before being turned into nanoscale particles by an emulsion-evaporation process using DSPE-PEG2000 (Distearoyl-sn-Glycero-3-Phosphoethanolamine-N-(methoxy(polyethylene glycol)-2000) as the only excipient. Spherical nanoparticles (NPs) of about 140-170 nm, with a negative zeta potential, were obtained for each LDC and exhibited good stability upon storage at 4 °C for 45 days with no recrystallization of LDCs observed. LDC encapsulation efficacy was above 95% for the three LDCs, leading to a LDC loading of about 90% and an equivalent DXM loading above 50%. Although the ester and carbonate NPs did not exhibit any toxicity up to an equivalent DXM concentration of 100 µg/mL, the carbamate LDC NPs appeared very toxic towards RAW 264.7 macrophages and were discarded. Both ester and carbonate LDC NPs were shown to exert anti-inflammatory activity on LPS-activated macrophages. DXM release from LDC NPs in murine plasma was faster from ester than from carbonate NPs. Finally, pharmacokinetics and biodistribution were conducted, showing a lower exposure to DXM from carbonate LDC NPs than from ester LDC NPs, correlated with the slower DXM release from carbonate LDC NPs. These results outline the need for extended studies to find the best prodrug system for extended drug release.

Pickering emulsions stabilized with biodegradable nanoparticles for the co-encapsulation of two active pharmaceutical ingredients.

Innovative Pickering emulsions co-encapsulating two active pharmaceutical ingredients (API) were formulated for a topical use. An immunosuppressive agent, either cyclosporine A (CysA) or tacrolimus (TAC), was encapsulated at high drug loading in biodegradable and biocompatible poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP). These NP stabilized the oil droplets (Miglyol) containing an anti-inflammatory drug, calcitriol (CAL). The influence of the API on the physico-chemical properties of these emulsions were studied. Emulsions formulated with or without API had a similar macroscopic and microscopic structure, as well as interfacial properties, and they exhibited a good stability for at least 55 days. The emulsions did not alter the viability of human keratinocytes (HaCaT cell line) after 2 and 5 days of exposure to NP concentrations equivalent to efficient API dosages. Thus, these new Pickering emulsions appear as a promising multidrug delivery system for the treatment of chronical inflammatory skin diseases.