Investigating the Orientation of an Interfacially Adsorbed Monoclonal Antibody and Its Fragments Using Neutron Reflection.

Interfacial adsorption is a molecular process occurring during the production, purification, transport, and storage of antibodies, with a direct impact on their structural stability and subsequent implications on their bioactivities. While the average conformational orientation of an adsorbed protein can be readily determined, its associated structures are more complex to characterize. Neutron reflection has been used in this work to investigate the conformational orientations of the monoclonal antibody COE-3 and its Fab and Fc fragments at the oil/water and air/water interfaces. Rigid body rotation modeling was found to be suitable for globular and relatively rigid proteins such as the Fab and Fc fragments but less so for relatively flexible proteins such as full COE-3. Fab and Fc fragments adopted a 'flat-on' orientation at the air/water interface, minimizing the thickness of the protein layer, but they adopted a substantially tilted orientation at the oil/water interface with increased layer thickness. In contrast, COE-3 was found to adsorb in tilted orientations at both interfaces, with one fragment protruding into the solution. This work demonstrates that rigid-body modeling can provide additional insights into protein layers at various interfaces relevant to bioprocess engineering.

Electrolyte/Dye/TiO2 Interfacial Structures of Dye-Sensitized Solar Cells Revealed by In Situ Neutron Reflectometry with Contrast Matching.

The nature of an interfacial structure buried within a device assembly is often critical to its function. For example, the dye/TiO2 interfacial structure that comprises the working electrode of a dye-sensitized solar cell (DSC) governs its photovoltaic output. These structures have been determined outside of the DSC device, using ex situ characterization methods; yet, they really should be probed while held within a DSC since they are modulated by the device environment. Dye/TiO2 structures will be particularly influenced by a layer of electrolyte ions that lies above the dye self-assembly. We show that electrolyte/dye/TiO2 interfacial structures can be resolved using in situ neutron reflectometry with contrast matching. We find that electrolyte constituents ingress into the self-assembled monolayer of dye molecules that anchor onto TiO2. Some dye/TiO2 anchoring configurations are modulated by the formation of electrolyte/dye intermolecular interactions. These electrolyte-influencing structural changes will affect dye-regeneration and electron-injection DSC operational processes. This underpins the importance of this in situ structural determination of electrolyte/dye/TiO2 interfaces within representative DSC device environments.

Markov Chain Modeling of Surfactant Critical Micelle Concentration and Surface Composition.

A Markov chain (MC) model has been used to model the following binary surfactant mixtures: linear alkylbenzenesulfonate (LAS4)/octaethylene glycol monododecyl ether (C12E8) at 10 and 25 °C, LAS6/acidic sophorolipid (AS), C12Betaine/C12Maltoside, sodium lauryl ether sulfate (SLES2)/C12E8, and rhamnolipid (R1)/LAS6. The critical micellar concentration and the composition of the adsorbed layer, for each system, can be modeled using the same monomer reactivity ratio values, g1 and g2. This implies that the interactions between the surfactants in the bulk solution and at the interface are the same, within error. For the LAS4/C12E8 system at 25 °C, the ranges of g1 and g2 values which can model both sets of data are within 0.03-0.05 and 1.55-2.10, respectively; g1 ≪ g2 implies that C12E8 is significantly more surface active than LAS4. The MC model indicates a negative change in the free energy upon mixing for all of the surfactant systems, consistent with the literature. The interfacial mixing behavior of LAS4/SLES2 is inferred from the results of the MC analysis of the LAS4/C12E8 and SLES2/C12E8 systems, which share a common surfactant partner in C12E8, and the prediction is in line with the published data.

Interfacial Adsorption of a Monoclonal Antibody and Its Fab and Fc Fragments at the Oil/Water Interface.

The physical stability of a monoclonal antibody (mAb) solution for injection in a prefilled syringe may in part depend on its behavior at the silicone oil/water interface. Here, the adsorption of a mAb (termed COE-3) and its fragment antigen-binding (Fab) and crystallizable (Fc) at the oil/water interface was measured using neutron reflection. A 1.4 ± 0.1 µm hexadecane oil film was formed on a sapphire block by a spin-freeze-thaw process, retaining its integrity upon contact with the protein solutions. Measurements revealed that adsorbed COE-3 and its Fab and Fc fragments retained their globular structure, forming layers that did not penetrate substantially into the oil phase. COE-3 and Fc were found to adsorb flat-on to the interface, with denser 45 and 42 Å inner layers, respectively, in contact with the oil and a more diffuse 17-21 Å outer layer caused by fragments adsorbing in a tilted manner. In contrast, Fab fragments formed a uniform 60 Å monolayer. Monolayers were formed under all conditions studied (10-200 ppm, using three isotopic contrasts), although changes in packing density across the COE-3 and Fc layers were observed. COE-3 had a higher affinity to the interface than either of its constituent fragments, while Fab had a lower interfacial affinity consistent with its higher net surface charge. This study extends the application of high-resolution neutron reflection measurements to the study of protein adsorption at the oil/water interface using an experimental setup mimicking the protein drug product in a siliconized prefilled syringe.

Determination of PMMA Residues on a Chemical-Vapor-Deposited Monolayer of Graphene by Neutron Reflection and Atomic Force Microscopy.

Chemical vapor deposition (CVD) is now a well-established method for creating monolayer graphene films. In this method, poly(methyl methacrylate) (PMMA) films are often coated onto monolayer graphene films to make them mechanically robust enough for transfer and further handling. However, it is found that PMMA is hard to remove entirely, and any residual polymers remaining can affect graphene's properties. We demonstrate here a method to determine the amount of PMMA remaining on the graphene sheet fabricated from CVD by a combined study of Raman scattering, atomic force microscopy, and neutron reflection. Neutron reflectivity is a powerful technique which is particularly sensitive to any interfacial structure, so it is able to investigate the density profile of the residual PMMA in the direction perpendicular to the graphene film surface. After the standard process of PMMA removal by acetone-IPA cleaning, we found that the remaining PMMA film could be represented as a two-layer model: an inner layer with a thickness of 17 Å and a roughness of 1 Å mixed with graphene and an outer diffuse layer with an average thickness of 31 Å and a roughness of 4 Å well mixed with water. On the basis of this model analysis, it was demonstrated that the remaining PMMA still occupied a significant fraction of the graphene film surface.

Temperature Resistant Binary SLES/Nonionic Surfactant Mixtures at the Air/Water Interface.

Surface compositions of adsorbed monolayers at the air/water interface, formed from binary surfactant mixtures in equilibrium, have been studied using neutron reflectivity at three discrete temperatures: 10, 25, and 40 °C. The binary compositions studied are sodium lauryl dodecyl ether sulfate (SLES EO3)/C12E n, where n = 6 and 8, at a fixed concentration of 2 mM with and without the addition of 0.1 M NaCl. Without NaCl, the nonionic surfactant dominates at the interface and nonideal mixing behavior is observed. This is modeled using the pseudophase approximation with a quadratic expansion of the free energy of mixing. The addition of 0.1 M NaCl screens the charge interaction between the surfactants and drives the surface composition of each system closer to that of the bulk composition. However, model fits to both the micelles and surface layers suggest that nonideal mixing is still taking place, although it is difficult to establish the extent of nonideality due to the limited data quality. The effect of temperature changes on the surface adsorption and composition of the surfactant mixtures is minimal and within error, with and without NaCl, but the critical micelle concentrations are significantly affected. This indicates the dominant influence of steric hindrances and surfactant charge interactions in determining interfacial behavior for these surfactants, relative to the temperature changes. The study also highlights the delicate effect of a relatively small change in the number of EO groups on mixing behavior.

Structural Features of Reconstituted Cuticular Wax Films upon Interaction with Nonionic Surfactant C12E6.

The interaction of nonionic surfactant hexaethylene glycol monododecyl ether (C12E6) with a reconstituted cuticular wheat wax film has been investigated by spectroscopic ellipsometry and neutron reflection (NR) to help understand the role of the leaf wax barrier during pesticide uptake, focusing on the mimicry of the actions adjuvants impose on the physical integrity and transport of the cuticular wax films against surfactant concentration. As the C12E6 concentration was increased up to the critical micelle concentration (CMC = 0.067 mM), an increasing amount of surfactant mass was deposited onto the wax film. Alongside surface adsorption, C12E6 was also observed to penetrate the wax film, which is evident from the NR measurements using fully protonated and chain-deuterated surfactants. Furthermore, surfactant action upon the model wax film was found to be physically reversible below the CMC, as water rinsing could readily remove the adsorbed surfactant, leaving the wax film in its original state. Above the CMC, the detergency action of the surfactant became dominant, and a significant proportion of the wax film was removed, causing structural damage. The results thus reveal that both water and C12E6 could easily penetrate the wax film throughout the concentration range measured, indicating a clear pathway for the transport of active ingredients while the removal of the wax components above the CMC must have enhanced the transport process. As the partial removal of the wax film could also expose the underlying cutaneous substrate to the environment and undermine the plant's health, this study has a broad implication to the roles of surfactants in crop care.

Adsorption at the Air-Water Interface in Biosurfactant-Surfactant Mixtures: Quantitative Analysis of Adsorption in a Five-Component Mixture.

The composition of the air-water adsorbed layer of a quinary mixture consisting of three conventional surfactants, octaethylene glycol monododecyl ether (C12E8), dodecane-6-p-sodium benzene sulfonate (LAS6), and diethylene glycol monododecyl ether sodium sulfate (SLE2S), mixed with two biosurfactants, the rhamnolipids l-rhamnosyl-l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R2, and l-rhamnosyl-ß-hydroxydecanoyl-ß-hydroxydecanoyl, R1, has been measured over a range of compositions above the mixed critical micelle concentration. Additional measurements on some of the subsets of ternary and binary mixtures have also been measured by NR. The results have been analyzed using the pseudophase approximation (PPA) in conjunction with an excess free energy, GE, that depends on the quadratic and cubic terms in the composition. The compositions of the binary, ternary, and quinary mixtures could all be fitted to two sets of interaction parameters between the pairs of surfactants, one for micelles and one for adsorption. No ternary interactions or ternary corrections were required. Because the system contains two strongly anionic surfactants, the PPA can be extended, in practice, to ionic surfactants, contrary to the prevailing view. The values of the interaction parameters show that the quinary mixture, SLE2S-LAS6-C12E8-R1-R2, which is known to be a highly effective surfactant system, is characterized by a sequence of strong surface but weak micellar interactions. About half of the minima in GE for the strong surface interactions occur well away from the regular solution value of 0.5.

Impact of Electrolyte on Adsorption at the Air-Water Interface for Ternary Surfactant Mixtures above the Critical Micelle Concentration.

The composition of the air-water adsorbed layer of the ternary surfactant mixture, octaethylene monododecyl ether, C12E8, sodium dodecyl 6-benzenesulfonate, LAS, and sodium dioxyethylene glycol monododecyl sulfate, SLES, and of each of the binary mixtures, with varying amounts of electrolyte, has been studied by neutron reflectivity. The measurements were made above the mixed critical micelle concentration. In the absence of electrolyte adsorption is dominated by the nonionic component C12E8 but addition of electrolyte gradually changes this so that SLES and LAS dominate at higher electrolyte concentrations. The composition of the adsorbed layer in both binary and ternary mixtures can be quantitatively described using the pseudo-phase approximation with quadratic and cubic interactions in the excess free energy of mixing (GE) at both the surface and in the micelles. A single set of parameters fits all the experimental data. A similar analysis is effective for a mixture in which SDS replaces SLES. Addition of electrolyte weakens the synergistic SLES-C12E8 and LAS-C12E8 interactions, consistent with them being dominated by electrostatic interactions. The SLES-LAS (and SDS-LAS) interaction is moderately strong at the surface and is little affected by addition of electrolyte, suggesting that it is controlled by structural or packing factors. Most of the significant interactions in the mixtures are unsymmetrical with respect to composition, with the minimum in GE at the 1:2 or 2:1 composition. There is a small structural contribution to the LAS-C12E8 interaction that leads to a minimum intermediate in composition between 1:2 and 1:1 (LAS:C12E8) and to a significant residual GE in strong electrolyte.

Adsorption at air-water and oil-water interfaces and self-assembly in aqueous solution of ethoxylated polysorbate nonionic surfactants.

The Tween nonionic surfactants are ethoxylated sorbitan esters, which have 20 ethylene oxide groups attached to the sorbitan headgroup and a single alkyl chain, lauryl, palmityl, stearyl, or oleyl. They are an important class of surfactants that are extensively used in emulsion and foam stabilization and in applications associated with foods, cosmetics and pharmaceuticals. A range of ethoxylated polysorbate surfactants, with differing degrees of ethoxylation from 3 to 50 ethylene oxide groups, have been synthesized and characterized by neutron reflection, small-angle neutron scattering, and surface tension. In conjunction with different alkyl chain groups, this provides the opportunity to modify their surface properties, their self-assembly in solution, and their interaction with macromolecules, such as proteins. Adsorption at the air-water and oil-water interfaces and solution self-assembly of the range of ethoxylated polysorbate surfactants synthesized are presented and discussed.

Mode of lysozyme protein adsorption at end-tethered polyethylene oxide brushes on gold surfaces determined by neutron reflectivity.

The mode of lysozyme protein adsorption at end-tethered thiol-terminated polyethylene oxide brushes grafted upon gold was determined in situ by neutron reflectivity using the INTER instrument at target station 2, ISIS, RAL, UK. It was found that the most probable position of protein adsorption at these weakly protein resistive brushes was at the gold-brush interface in the so-called primary protein position.

An accurate in vitro model of the E.†coli envelope.

Gram-negative bacteria are an increasingly serious source of antibiotic-resistant infections, partly owing to their characteristic protective envelope. This complex, 20 nm thick barrier includes a highly impermeable, asymmetric bilayer outer membrane (OM), which plays a pivotal role in resisting antibacterial chemotherapy. Nevertheless, the OM molecular structure and its dynamics are poorly understood because the structure is difficult to recreate or study in vitro. The successful formation and characterization of a fully asymmetric model envelope using Langmuir-Blodgett and Langmuir-Schaefer methods is now reported. Neutron reflectivity and isotopic labeling confirmed the expected structure and asymmetry and showed that experiments with antibacterial proteins reproduced published in vivo behavior. By closely recreating natural OM behavior, this model provides a much needed robust system for antibiotic development.

Structural studies of nonionic dodecanol ethoxylates at the oil-water interface: effect of increasing head group size.

The conformation of charged surfactants at the oil-water interface was recently reported. With the aim to assess the role of the head group size on the conformation of the adsorbed layer, we have extended these studies to a series of nonionic dodecanol ethoxylate surfactants (C12En, ethylene oxide units n from 6 to 12). The study was performed using neutron reflectometry to enable maximum sensitivity to buried interfaces. Similarly to charged surfactants, the interface was found to be broader and rougher compared to the air-water interface. Irrespective of the head group size, the tail group region was found to assume a staggered conformation. The conformations of the head group were found to be significantly different from those of the air-water interface, moving from a globular to an almost fully extended conformation at the oil-water interface. The stretching of the head groups is attributed to the presence of some hexadecane oil molecules, which may penetrate all the way to this region. It is proposed here that the presence of the oil, which can efficiently solvate the surfactant tail groups, plays a key role in the conformation of the adsorbed layer and is responsible for the broadening of the interface.

Impact of the degree of ethoxylation of the ethoxylated polysorbate nonionic surfactant on the surface self-assembly of hydrophobin-ethoxylated polysorbate surfactant mixtures.

Neutron reflectivity measurements have been used to study the surface adsorption of the polyethylene sorbitan monostearate surfactant, with degrees of ethoxylation varying from 3 to 20 ethylene oxide groups, with the globular protein hydrophobin. The surface interaction between the ethoxylated polysorbate nonionic surfactants and the hydrophobin results in self-assembly at the air-solution interface in the form of a well-defined layered surface structure. The surface interaction arises from a combination of the hydrophobic interaction between the surfactant alkyl chain and the hydrophobic patch on the surface of the hydrophobin, and the hydrophilic interaction between the ethoxylated sorbitan headgroup and the hydrophilic regions on the surface of the hydrophobin. The results presented show that varying the degree of ethoxylation of the polysorbate surfactant changes the interaction between the surfactant and the hydrophobin and the packing, and hence the evolution in the resulting surface structure. The optimal degree of ethoxylation for multilayer formation is over a broad range, from of order 6 to 17 ethylene oxide groups, and for degrees of ethoxylation of 3 and 20 only monolayer adsorption of either the surfactant or the hydrophobin is observed.

Ion specific effects in trivalent counterion induced surface and solution self-assembly of the anionic surfactant sodium polyethylene glycol monododecyl ether sulfate.

The effect of different trivalent counterions, Al(3+), Cr(3+), Sc(3+), Gd(3+), and La(3+), on the surface adsorption and Al(3+), Cr(3+), and Sc(3+) for solution self-assembly of the anionic surfactant sodium polyethylene glycol monododecyl ether sulfate has been studied by neutron reflectivity and small angle neutron scattering. The strong binding and complexation between the trivalent counterions and the anionic surfactant result in significant micellar growth and the formation of surface multilayer structures at the air-water interface at relatively low counterion concentrations. Broadly similar surface and solution behaviors are observed for the different trivalent counterions. The evolution in the surface and solution structures in detail depends upon the nature of the counterion, its hydrated radius and its strength of binding. Exceptionally the addition of Cr(3+) counterions have a less pronounced effect. This is attributed to a greater reluctance for exchange within the primary hydration shell for Cr(3+) ions, which results in a shielding of the electrostatic interactions and a reduced surfactant-counterion binding.

Calcium-mediated binding of DNA to 1,2-distearoyl-sn-glycero-3-phosphocholine-containing mixed lipid monolayers.

The calcium-mediated interaction of DNA with monolayers of the non-toxic, zwitterionic phospholipid, 1,2-distearoyl-sn-glycero-3-phosphocholine when mixed with 50 mol% of a second lipid, either the zwitteronic 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine or neutral cholesterol was investigated using a combination of surface pressure-area isotherms, Brewster angle microscopy, external reflectance Fourier transform infrared spectroscopy and specular neutron reflectivity in combination with contrast variation. When calcium and DNA were both present in the aqueous subphase, changes were observed in the compression isotherms as well as the surface morphologies of the mixed lipid monolayers. In the presence of calcium and DNA, specular neutron reflectivity showed that directly underneath the head groups of the lipids comprising the monolayers, DNA occupied a layer comprising approximately 13 and 18% v/v DNA for the 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine and cholesterol-containing monolayers, respectively. The volume of the corresponding layer for 1,2-distearoyl-sn-glycero-3-phosphocholine only containing monolayers was ∼15% v/v DNA. Furthermore regardless of the presence and nature of the second lipid and the surface pressure of the monolayer, the specular neutron reflectivity experiments showed that the DNA-containing layer was 20-27 Šthick, suggesting the presence of a well-hydrated layer of double-stranded DNA. External reflectance Fourier transform infrared studies confirmed the presence of double stranded DNA, and indicated that the strands are in the B-form conformation. The results shed light on the interaction between lipids and nucleic acid cargo as well as the role of a second lipid in lipid-based carriers for drug delivery.

Low resolution structure and dynamics of a colicin-receptor complex determined by neutron scattering.

Proteins that translocate across cell membranes need to overcome a significant hydrophobic barrier. This is usually accomplished via specialized protein complexes, which provide a polar transmembrane pore. Exceptions to this include bacterial toxins, which insert into and cross the lipid bilayer itself. We are studying the mechanism by which large antibacterial proteins enter Escherichia coli via specific outer membrane proteins. Here we describe the use of neutron scattering to investigate the interaction of colicin N with its outer membrane receptor protein OmpF. The positions of lipids, colicin N, and OmpF were separately resolved within complex structures by the use of selective deuteration. Neutron reflectivity showed, in real time, that OmpF mediates the insertion of colicin N into lipid monolayers. This data were complemented by Brewster Angle Microscopy images, which showed a lateral association of OmpF in the presence of colicin N. Small angle neutron scattering experiments then defined the three-dimensional structure of the colicin N-OmpF complex. This revealed that colicin N unfolds and binds to the OmpF-lipid interface. The implications of this unfolding step for colicin translocation across membranes are discussed.

Interfacial assembly of lipopeptide surfactants on octyltrimethoxysilane-modified silica surface.

The adsorption of a series of cationic lipopeptide surfactants, C14Kn (where C14 denotes the myristic acyl chain and Kn represents n number of lysine residues) at the hydrophobic solid/water interface has been studied using spectroscopic ellipsometry (SE) and neutron reflection (NR). The hydrophobic C8 surface was prepared by grafting a monolayer of octyltrimethoxysilane on the silicon surface. SE was used to follow the dynamic adsorption from these lipopeptide surfactants and the amount was found to undergo a fast increase within the first 2-3 min, followed by a much slower process tending to equilibration in the subsequent 15-20 min. Lipopetide surfactants with n = 1-4 showed similar dynamic features, indicating that the interaction between the acyl chain and the C8 surface is the main driving force for adsorption. The saturation adsorption amount of C14Kn at the C8/water interface was found to be inversely related to the increasing number of Lys residues in the head group due to the increase of steric hindrance and electrostatic repulsion between the head groups. Solution concentration had a significant effect on the initial adsorption rate, similar to the feature observed from nonionic surfactants CmEn. The structure of the adsorbed layers was studied by NR in conjunction with isotopic contrasts. The layer formed by the head groups of C14K1 was 10 Å thick, and those formed by C14K2, C14K3 and C14K4 head groups were all about 13 Å thick. In contrast, the thicknesses of the layers formed by hydrophobic tails of C14K1, C14K2 C14K3, and C14K4 were found to be 17, 13, 10, and 10 Å, respectively, resulting in the steady increase of area per molecule at the interface from 29 ± 2 Å(2) for C14K1 to 65 ± 2 Å(2) for C14K4. Thus, with an increase in the head group length, the molecules in the adsorbed layer tended to lie down upon adsorption.

Effect of architecture on the formation of surface multilayer structures at the air-solution interface from mixtures of surfactant with small poly(ethyleneimine)s.

The impact of ethyleneimine architecture on the adsorption behavior of mixtures of small poly(ethyleneimines) and oligoethyleneimines (OEIs) with the anionic surfactant sodium dodecylsulfate (SDS) at the air-solution interface has been studied by surface tension (ST) and neutron reflectivity (NR). The strong surface interaction between OEI and SDS gives rise to complex surface tension behavior that has a pronounced pH dependence. The NR data provide more direct access to the surface structure and show that the patterns of ST behavior are correlated with substantial OEI/SDS adsorption and the spontaneous formation of surface multilayer structures. The regions of surface multilayer formation depend upon SDS and OEI concentrations, on the solution pH, and on the OEI architecture, linear or branched. For the linear OEIs (octaethyleneimine, linear poly(ethyleneimine) or LPEI(8), and decaethyleneimine, LPEI(10)) with SDS, surface multilayer formation occurs over a range of OEI and SDS concentrations at pH 7 and to a much lesser extent at pH 10, whereas at pH 3 only monolayer adsorption occurs. In contrast, for branched OEIs BPEI(8) and BPEI(10) surface multilayer formation occurs over a wide range of OEI and SDS concentrations at pH 3 and 7, and at pH 10, the adsorption is mainly in the form of a monolayer. The results provide important insight into how the OEI architecture and pH can be used to control and manipulate the nature of the OEI/surfactant adsorption.

Effect of polymer molecular weight and solution pH on the surface properties of sodium dodecylsulfate-poly(ethyleneimine) mixtures.

The effect of polymer molecular weight and solution pH on the surface properties of the anionic surfactant sodium dodecylsulfate, SDS, and a range of small linear poly(ethyleneimine), PEI, polyelectrolytes of different molecular weights has been studied by surface tension, ST, and neutron reflectivity, NR, at the air-solution interface. The strong SDS-PEI interaction gives rise to a complex pattern of ST behavior which depends significantly on solution pH and PEI molecular weight. The ST data correlate broadly with the more direct determination of the surface adsorption and surface structure obtained using NR. At pH 3, 7, and 10, the strong SDS-PEI interaction results in a pronounced SDS adsorption at relatively low SDS and PEI concentrations, and is largely independent of pH and PEI molecular weight (for PEI molecular weights on the order of 320, 640, and 2000 Da). At pH 7 and 10, there are combinations of SDS and PEI concentrations for which surface multilayer structures form. For the PEI molecular weights of 320 and 640 Da, these surface multilayer structures are most well-developed at pH 10 and less so at pH 7. At the molecular weight of 2000 Da, they are poorly developed at both pH 7 and 10. This evolution in the surface structure with molecular weight is consistent with previous studies, (1) where for a molecular weight of 25,000 Da no multilayer structures were observed for the linear PEI. The results show the importance with increasing polymer molecular weight of the entropic contribution due to the polymer flexibility in control of the surface multilayer formation.