RESUMO
BACKGROUND: In gender-affirming surgery, facial skeletal dimorphism is an important topic for every craniofacial surgeon. Few cephalometric studies have assessed this topic; however, they fall short to provide skeletal contour insights that direct surgical planning. Herein, we propose statistical shape modeling (SSM) as a novel tool for investigating mandibular dimorphism for young white individuals. METHODS: A single-center, retrospective study was performed using computed tomography (CT) scans of white individuals, aged 20 to 39 years old. AI-assisted, three-dimensional (3D) mandibles were reconstructed in Materialise Mimics v25.0. We used SSM to generate average 3D models for both genders. Relevant manual anthropometric measurements were taken for the SSMs and individual mandibles. Contour disparities were then represented using 3D overlays and heatmaps. Statistical analyses were performed using unpaired student t testing or Wilcoxon signed rank testing with 95% confidence interval as deemed appropriate by population-level normality assessment. RESULTS: Ninety-eight patients (53 females, 45 males) were included. Male mandibles showed greater bigonial width, intercondylar width, ramus height, and body length [p<0.005]. There was no statistically significant difference in the gonial angle measurements [p=0.62]. All relevant manual individual measurements demonstrated excellent concordance to their SSM counterparts. The 3D overlays of SSMs revealed squarer male chins with more lateral but less anterior projection than their female counterparts. Also, the female mandibles showed smoother transition at the gonial angle. CONCLUSIONS: SSM provides a novel tool to objectively evaluate volumetric and contour dimorphisms between genders. Moreover, this method can be automated, allowing for expedited comparisons between populations of interest compared to manual assessment. LEVEL OF EVIDENCE III: This journal requires that authors assign a level of evidence to each article. For a full description of these Evidence-Based Medicine ratings, please refer to the Table of Contents or the online Instructions to Authors www.springer.com/00266 . Bullet points about the importance of this work: Advancing Anthropometric Assessment: Statistical shape modeling (SSM) offers a cutting-edge approach to visualizing gender-specific skeletal anatomic differences for aesthetic and gender-affirming facial surgery. Expediting Comparative Analysis: The workflow established in this paper streamlines the evaluative process, enabling rapid morphologic comparisons between populations. Patient-Centered Care: This study establishes a foundation for the development of SSMs in individualized operative planning.
RESUMO
BACKGROUND: The objective of this study was to retrospectively review clinical and radiographic outcomes of patients who underwent corrective osteotomies for clavicle malunion and internal fixation for nonunion using a combination of virtual surgical planning, patient-specific 3-dimensional (3D)-printed clavicles, and 3D-printed cutting guides manufactured at the point of care. METHODS: Between 2015 and 2021, 18 patients underwent corrective osteotomy for a clavicle malunion (7 shoulders) or internal fixation for a clavicle nonunion (11 shoulders). There were 11 male and 7 female individuals with an average patient age of 43.9 (range 19-76) years. All patients underwent computed tomography evaluation of both clavicles. The DICOM files were manually segmented, virtual surgical planning was performed selectively using commercially available software, and a mirrored version of the normal clavicle was 3D printed along with a 3D-printed replica of the affected clavicle. Three-dimensionally printed mirrored clavicles were used in all cases to ensure adequate restoration of the shape and length of the clavicle and to precontour fixation plates. Virtual surgical planning and 3D-printed cutting guides for osteotomy were used in 4 of 18 (22%) patients. Either cancellous or structural intercalary bone grafting was used in 15 of 18 (83%) cases. Patients were contacted postoperatively to determine clinical outcome scores. Preoperative, early postoperative, and late postoperative radiographs were reviewed to assess for union and complications. The average follow-up time was 24.9 months. RESULTS: Radiographic evaluation at the most recent follow-up demonstrated adequate restoration of length and successful union for all shoulders. There were no complications or reoperations. Postoperative patient-reported outcomes could be obtained in 16 of 18 (88.9%) patients. At the most recent follow-up, the mean visual analog scale for pain was 2.38 points (range, 1-7), the mean shoulder American Shoulder and Elbow Surgeons score was 73.2 points (range, 25-100), and the mean Patient-Reported Outcome Measurement Information System Upper Extremity score was 26 points (range, 7-35). All (100%) the patients were satisfied with their outcome (9 very satisfied, 7 satisfied), and their mean subjective shoulder value was 73% (range, 10%-100%). However, 2 patients complained of hardware-related symptoms, and 1 patient had return of preoperative symptoms after an interim 2 years of pain relief. CONCLUSION: The use of mirrored 3D-printed clavicles combined with virtual surgical planning and patient-specific 3D guides provides a reliable technique for restoring native anatomy when performing corrective osteotomies for clavicle malunion or internal fixation for clavicle nonunion, with a high rate of satisfactory clinical and radiographic outcomes.
Assuntos
Clavícula , Fraturas Mal-Unidas , Humanos , Masculino , Feminino , Adulto Jovem , Adulto , Pessoa de Meia-Idade , Idoso , Clavícula/diagnóstico por imagem , Clavícula/cirurgia , Fraturas Mal-Unidas/diagnóstico por imagem , Fraturas Mal-Unidas/cirurgia , Estudos Retrospectivos , Osteotomia/métodos , Dor , Resultado do TratamentoRESUMO
BACKGROUND: Novel therapeutic strategies are urgently needed for Neisseria gonorrhoeae, given its increasing antimicrobial resistance. Treatment of oropharyngeal N. gonorrhoeae infections has proven particularly challenging, with most reported treatment failures of the first-line drug ceftriaxone occurring at this site and lower cure rates in recent trials of new antibiotics reported for oropharyngeal infections compared with other sites of infection. However, the accessibility of the oropharynx to topical therapeutics provides an opportunity for intervention. Local delivery of a therapeutic at a high concentration would enable the use of non-traditional antimicrobial candidates, including biological molecules that exploit underlying chemical sensitivities of N. gonorrhoeae but lack the potency or pharmacokinetic profiles required for effective systemic administration. METHODS: Two classes of molecules that are thought to limit gonococcal viability in vivo, bile acids and short- and medium-chain fatty acids, were examined for rapid bactericidal activity. RESULTS: The bile acids deoxycholic acid (DCA) and chenodeoxycholic acid (CDCA), but not other bile acid species, exerted extremely rapid bactericidal properties against N. gonorrhoeae, reducing viability more than 100â000-fold after 1 min. The short-chain fatty acids formic acid and hexanoic acid shared this rapid bactericidal activity. All four molecules are effective against a phylogenetically diverse panel of N. gonorrhoeae strains, including clinical isolates with upregulated efflux pumps and resistance alleles to the most widely used classes of existing antimicrobials. DCA and CDCA are both approved therapeutics for non-infectious indications and are well-tolerated by cultured epithelial cells. CONCLUSIONS: DCA and CDCA are attractive candidates for further development as anti-gonococcal agents.
Assuntos
Gonorreia , Antibacterianos/farmacologia , Antibacterianos/uso terapêutico , Ácidos e Sais Biliares/farmacologia , Farmacorresistência Bacteriana , Ácidos Graxos/farmacologia , Gonorreia/tratamento farmacológico , Humanos , Testes de Sensibilidade Microbiana , Neisseria gonorrhoeaeRESUMO
Background: With neck, aging the cervicomental angle becomes obtuse and may be influenced by hyoid bone aging. An understanding of hyoid position changes with aging will further our understanding of its role in neck contour changes. Methods: A 3D volumetric reconstruction of 282 neck computed tomography scans was performed. The cohort was categorized into three groups based on age: 20 years or older and younger than 40 years, 40 years or older and younger than 60 years, and 60 years or older and younger than 80 years. The vertical and horizontal hyoid distances in relation to the mandible were calculated for each patient. Results: A total of 282 patients (153 women, 129 men) were included in the cohort. The age groups were evenly distributed in men and women. Mean hyoid vertical and horizontal distances differed between women and men in all age groups. There was a significant difference in the hyoid vertical distance between 20-39 years old to 40-59 years old in men (P < 0.01), and 20-39 years old to 60-79 years old in both genders (women P = 0.005, men P < 0.01). Hyoid horizontal distance was not affected by age and sex (age and sex: P > 0.05), but rather by body mass index (BMI). Every 5 BMI points corresponded to a forward movement of 2 mm. Conclusions: As individuals age, the hyoid bone descends in both sexes, and an increase in BMI is associated with forward movement. Additional studies are needed to assess the correlation of the hyoid position between upright and supine positions.
RESUMO
PURPOSE: Minibeam radiation therapy (MBRT) is characterized by the delivery of submillimeter-wide regions of high "peak" and low "valley" doses throughout a tumor. Preclinical studies have long shown the promise of this technique, and we report here the first clinical implementation of MBRT. METHODS AND MATERIALS: A clinical orthovoltage unit was commissioned for MBRT patient treatments using 3-, 4-, 5-, 8-, and 10-cm diameter cones. The 180 kVp output was spatially separated into minibeams using a tungsten collimator with 0.5 mm wide slits spaced 1.1 mm on center. Percentage depth dose (PDD) measurements were obtained using film dosimetry and plastic water for both peak and valley doses. PDDs were measured on the central axis for offsets of 0, 0.5, and 1 cm. The peak-to-valley ratio was calculated at each depth for all cones and offsets. To mitigate the effects of patient motion on delivered dose, patient-specific 3-dimensional-printed collimator holders were created. These conformed to the unique anatomy of each patient and affixed the tungsten collimator directly to the body. Two patients were treated with MBRT; both received 2 fractions. RESULTS: Peak PDDs decreased gradually with depth. Valley PDDs initially increased slightly with depth, then decreased gradually beyond 2 cm. The peak-to-valley ratios were highest at the surface for smaller cone sizes and offsets. In vivo film dosimetry confirmed a distinct delineation of peak and valley doses in both patients treated with MBRT with no dose blurring. Both patients experienced prompt improvement in symptoms and tumor response. CONCLUSIONS: We report commissioning results, treatment processes, and the first 2 patients treated with MBRT using a clinical orthovoltage unit. While demonstrating the feasibility of this approach is a crucial first step toward wider translation, clinical trials are needed to further establish safety and efficacy.
RESUMO
Trochlear dysplasia is a major contributor to patellofemoral instability and subsequent failure of isolated soft tissue reconstruction procedures in the treatment of recurrent patellar dislocation and/or subluxation. Trochleoplasty procedures aim to address abnormal osseous trochlear morphologic factors that contribute to patellar maltracking. However, teaching these techniques is limited by the lack of reliable training models for trochlear dysplasia and trochleoplasty simulation. Although a cadaveric knee model of trochlear dysplasia for trochleoplasty simulation has been recently described, cadaveric knees are less amenable for use in trochleoplasty planning and surgeon training because of the absence of reliable, natural dysplastic anatomic relationships, such as suprapatellar spurs due to the rarity of dysplastic cadavers and the high cost of cadaveric specimens. Furthermore, readily available sawbone models represent "normal" osseous trochlear morphology and are difficult to modify and bend due to their material composition. Given this, we have developed a cost-effective, reliable, and anatomically accurate three-dimensional (3D) knee model of trochlear dysplasia for trochleoplasty simulation and trainee education.
RESUMO
CASE: This report describes the case of an athletic 12-year-old boy who presented with a 64° left proximal humeral varus angulation deformity and physeal bar secondary to multiple operations for a proximal humeral metaphyseal cystic lesion and pathologic fracture. Using a combined lateral closing and medial opening-wedge osteotomy, a 68° valgus correction was achieved with excellent clinical and functional outcomes at 16-month follow-up. Forward flexion increased from 120 to 170° preoperatively to postoperatively while abduction improved from 110° preoperatively to 170° postoperatively. CONCLUSION: A combined lateral closing and medial opening-wedge osteotomy of the proximal humerus can successfully treat cases of extreme proximal humerus varus in the growing shoulder where unilateral or dome osteotomies are not suitable.
Assuntos
Úmero , Ombro , Criança , Humanos , Masculino , Epífises , Úmero/diagnóstico por imagem , Úmero/cirurgia , Osteotomia , Resultado do TratamentoRESUMO
Patient adherence to chronic therapies can be suboptimal, leading to poor therapeutic outcomes. Dosage forms that enable reduction in dosing frequency stand to improve patient adherence. Variation in gastrointestinal transit time, inter-individual differences in gastrointestinal physiology and differences in physicochemical properties of drugs represent challenges to the development of such systems. To this end, a small intestine-targeted drug delivery system is developed, where prolonged gastrointestinal retention and sustained release are achieved through tissue adhesion of drug pills mediated by an essential intestinal enzyme catalase. Here proof-of-concept pharmacokinetics is demonstrated in the swine model for two drugs, hydrophilic amoxicillin and hydrophobic levodopa. It is anticipated that this system can be applicable for many drugs with a diverse of physicochemical characteristics.
Assuntos
Adesivos , Sistemas de Liberação de Medicamentos , Humanos , Animais , Suínos , Preparações Farmacêuticas , Trato Gastrointestinal , Intestino DelgadoRESUMO
Maintaining an ample supply of personal protective equipment continues to be a challenge for the healthcare industry, especially during emergency situations and times of strain on the supply chain. Most critically, healthcare workers exposed to potential airborne hazards require sufficient respiratory protection. Respirators are the only type of personal protective equipment able to provide adequate respiratory protection. However, their ability to shield hazards depends on design, material, proper fit, and environmental conditions. As a result, not all respirators may be adequate for all scenarios. Additionally, factors including user comfort, ease of use, and cost contribute to respirator effectiveness. Therefore, a careful consideration of these parameters is essential for ensuring respiratory protection for those working in the healthcare industry. Here respirator design and material characteristics are reviewed, as well as properties of airborne hazards and potential filtration mechanisms, regulatory standards of governmental agencies, respirator efficacy in the clinical setting, attitude of healthcare personnel toward respiratory protection, and environmental and economic considerations of respirator manufacturing and distribution.
RESUMO
Carbon monoxide (CO) has long been considered a toxic gas but is now a recognized bioactive gasotransmitter with potent immunomodulatory effects. Although inhaled CO is currently under investigation for use in patients with lung disease, this mode of administration can present clinical challenges. The capacity to deliver CO directly and safely to the gastrointestinal (GI) tract could transform the management of diseases affecting the GI mucosa such as inflammatory bowel disease or radiation injury. To address this unmet need, inspired by molecular gastronomy techniques, we have developed a family of gas-entrapping materials (GEMs) for delivery of CO to the GI tract. We show highly tunable and potent delivery of CO, achieving clinically relevant CO concentrations in vivo in rodent and swine models. To support the potential range of applications of foam GEMs, we evaluated the system in three distinct disease models. We show that a GEM containing CO dose-dependently reduced acetaminophen-induced hepatocellular injury, dampened colitis-associated inflammation and oxidative tissue injury, and mitigated radiation-induced gut epithelial damage in rodents. Collectively, foam GEMs have potential paradigm-shifting implications for the safe therapeutic use of CO across a range of indications.
Assuntos
Colite , Doenças Inflamatórias Intestinais , Animais , Monóxido de Carbono/uso terapêutico , Colite/tratamento farmacológico , Gases , Inflamação/tratamento farmacológico , Doenças Inflamatórias Intestinais/tratamento farmacológico , SuínosRESUMO
Cancer patients undergoing therapeutic radiation routinely develop injury of the adjacent gastrointestinal (GI) tract mucosa due to treatment. To reduce radiation dose to critical GI structures including the rectum and oral mucosa, 3D-printed GI radioprotective devices composed of high-Z materials are generated from patient CT scans. In a radiation proctitis rat model, a significant reduction in crypt injury is demonstrated with the device compared to without (p < 0.0087). Optimal device placement for radiation attenuation is further confirmed in a swine model. Dosimetric modeling in oral cavity cancer patients demonstrates a 30% radiation dose reduction to the normal buccal mucosa and a 15.2% dose reduction in the rectum for prostate cancer patients with the radioprotectant material in place compared to without. Finally, it is found that the rectal radioprotectant device is more cost-effective compared to a hydrogel rectal spacer. Taken together, these data suggest that personalized radioprotectant devices may be used to reduce GI tissue injury in cancer patients undergoing therapeutic radiation.
Assuntos
Trato Gastrointestinal/efeitos da radiação , Neoplasias Bucais/radioterapia , Impressão Tridimensional , Lesões por Radiação/prevenção & controle , Proteção Radiológica/instrumentação , Proteção Radiológica/métodos , Animais , Modelos Animais de Doenças , Trato Gastrointestinal/diagnóstico por imagem , Humanos , Mucosa/diagnóstico por imagem , Mucosa/efeitos da radiação , Órgãos em Risco , Ratos , Ratos Sprague-Dawley , Suínos , Tomografia Computadorizada por Raios XRESUMO
OBJECTIVE: To develop and test a new reusable, sterilisable N95 filtering facepiece respirator (FFR)-comparable face mask, known as the Injection Molded Autoclavable, Scalable, Conformable (iMASC) system, given the dire need for personal protective equipment within healthcare settings during the COVID-19 pandemic. DESIGN: Single-arm feasibility study. SETTING: Emergency department and outpatient oncology clinic. PARTICIPANTS: Healthcare workers who have previously undergone N95 fit testing. INTERVENTIONS: Fit testing of new iMASC system. PRIMARY AND SECONDARY OUTCOME MEASURES: Primary outcome is success of fit testing using an Occupational Safety and Health Administration (OSHA)-approved testing method, and secondary outcomes are user experience with fit, breathability and filter replacement. RESULTS: Twenty-four subjects were recruited to undergo fit testing, and the average age of subjects was 41 years (range of 21-65 years) with an average body mass index of 26.5 kg/m2. The breakdown of participants by profession was 46% nurses (n=11), 21% attending physicians (n=5), 21% resident physicians (n=5) and 12% technicians (n=3). Of these participants, four did not perform the fit testing due to the inability to detect saccharin solution on premask placement sensitivity test, lack of time and inability to place mask over hair. All participants (n=20) who performed the fit test were successfully fitted for the iMASC system using an OSHA-approved testing method. User experience with the iMASC system, as evaluated using a Likert scale with a score of 1 indicating excellent and a score of 5 indicating very poor, demonstrated an average fit score of 1.75, breathability of 1.6, and ease of replacing the filter on the mask was scored on average as 2.05. CONCLUSIONS: The iMASC system was shown to successfully fit multiple different face sizes and shapes using an OSHA-approved testing method. These data support further certification testing needed for use in the healthcare setting.
Assuntos
Infecções por Coronavirus/prevenção & controle , Desenho de Equipamento , Transmissão de Doença Infecciosa do Paciente para o Profissional/prevenção & controle , Pandemias/prevenção & controle , Pneumonia Viral/prevenção & controle , Dispositivos de Proteção Respiratória , Elastômeros de Silicone , Adulto , Idoso , Pessoal Técnico de Saúde , Betacoronavirus , COVID-19 , Infecções por Coronavirus/transmissão , Reutilização de Equipamento , Estudos de Viabilidade , Feminino , Humanos , Masculino , Pessoa de Meia-Idade , Enfermeiras e Enfermeiros , Médicos , Pneumonia Viral/transmissão , Estudos Prospectivos , SARS-CoV-2 , Esterilização , Adulto JovemRESUMO
N95 filtering facepiece respirators (FFR) and surgical masks are essential in reducing airborne disease transmission, particularly during the COVID-19 pandemic. However, currently available FFR's and masks have major limitations, including masking facial features, waste, and integrity after decontamination. In a multi-institutional trial, we evaluated a transparent, elastomeric, adaptable, long-lasting (TEAL) respirator to evaluate success of qualitative fit test with user experience and biometric evaluation of temperature, respiratory rate, and fit of respirator using a novel sensor. There was a 100% successful fit test among participants, with feedback demonstrating excellent or good fit (90% of participants), breathability (77.5%), and filter exchange (95%). Biometric testing demonstrated significant differences between exhalation and inhalation pressures among a poorly fitting respirator, well-fitting respirator, and the occlusion of one filter of the respirator. We have designed and evaluated a transparent elastomeric respirator and a novel biometric feedback system that could be implemented in the hospital setting.