Construction of Embedded Sulfur-Doped g-C3N4/BiOBr S-Scheme Heterojunction for Highly Efficient Visible Light Photocatalytic Degradation of Organic Compound Rhodamine B.

Constructing S-scheme heterojunction catalysts is a key challenge in visible-light catalysed degradation of organic pollutants. Most heterojunction materials are reported to face significant obstacles in the separation of photogenerated electron-hole pairs owing to differences in the material size and energy barriers. In this study, sulfur-doped g-C3N4 oxidative-type semiconductor materials are synthesized and then coupled with BiOBr reductive-type semiconductor to form S-g-C3N4/BiOBr S-scheme heterojunction. A strong and efficient internal electric field is established between the two materials, facilitating the separation of photogenerated electron-hole pairs. Notably, in situ XPS proved that after visible light irradiation, Bi3+ is converted into Bi(3+ɑ)+, and a large number of photogenerated holes are produced on the surface of BiOBr, which oxidized and activated H2O into •OH.  â€¢OH cooperated with •O2 - and 1O2 to attack Rhodamine B (RhB) molecules to achieve deep oxidation mineralization. The composite material is designed with a LUMO energy level higher than that of RhB, promoting the sensitization of RhB by injecting photogenerated electrons into the heterojunction, thereby enhancing the photocatalytic performance to 22.44 times that of pure g-C3N4. This study provides a new perspective on the efficient degradation of organic molecules using visible light catalysis.

Engineering of Graphitic Carbon Nitride (g-C3N4) Based Photocatalysts for Atmospheric Protection: Modification Strategies, Recent Progress, and Application Challenges.

Graphitic carbon nitride (g-C3N4) is a prominent photocatalyst that has attracted substantial interest in the field of photocatalytic environmental remediation due to the low cost of fabrication, robust chemical structure, adaptable and tunable energy bandgaps, superior photoelectrochemical properties, cost-effective feedstocks, and distinctive framework. Nonetheless, the practical application of bulk g-C3N4 in the photocatalysis field is limited by the fast recombination of photogenerated e--h+ pairs, insufficient surface-active sites, and restricted redox capacity. Consequently, a great deal of research has been devoted to solving these scientific challenges for large-scale applications. This review concisely presents the latest advancements in g-C3N4-based photocatalyst modification strategies, and offers a comprehensive analysis of the benefits and preparation techniques for each strategy. It aims to articulate the complex relationship between theory, microstructure, and activities of g-C3N4-based photocatalysts for atmospheric protection. Finally, both the challenges and opportunities for the development of g-C3N4-based photocatalysts are highlighted. It is highly believed that this special review will provide new insight into the synthesis, modification, and broadening of g-C3N4-based photocatalysts for atmospheric protection.

Constructing B─N─P Bonds in Ultrathin Holey g-C3N4 for Regulating the Local Chemical Environment in Photocatalytic CO2 Reduction to CO.

The lack of intrinsic active sites for photocatalytic CO2 reduction reaction (CO2RR) and fast recombination rate of charge carriers are the main obstacles to achieving high photocatalytic activity. In this work, a novel phosphorus and boron binary-doped graphitic carbon nitride, highly porous material that exhibits powerful photocatalytic CO2 reduction activity, specifically toward selective CO generation, is disclosed. The coexistence of Lewis-acidic and Lewis-basic sites plays a key role in tuning the electronic structure, promoting charge distribution, extending light-harvesting ability, and promoting dissociation of excitons into active carriers. Porosity and dual dopants create local chemical environments that activate the pyridinic nitrogen atom between the phosphorus and boron atoms on the exposed surface, enabling it to function as an active site for CO2RR. The P-N-B triad is found to lower the activation barrier for reduction of CO2 by stabilizing the COOH reaction intermediate and altering the rate-determining step. As a result, CO yield increased to 22.45 µmol g-1 h-1 under visible light irradiation, which is ≈12 times larger than that of pristine graphitic carbon nitride. This study provides insights into the mechanism of charge carrier dynamics and active site determination, contributing to the understanding of the photocatalytic CO2RR mechanism.

P-N Bonds-Mediated Atomic-Level Charge-Transfer Channel Fabricated between Violet Phosphorus and Carbon Nitride Favors Charge Separation and Water Splitting.

Heterostructures are widely employed in photocatalysis to promote charge separation and photocatalytic activity. However, their benefits are limited by the linkages and contact environment at the interface. Herein, violet phosphorus quantum dots (VPQDs) and graphitic carbon nitride (g-C3N4) are employed as model materials to form VPQDs/g-C3N4 heterostructures by a simple ultrasonic pulse excitation method. The heterostructure contains strong interfacial P-N bonds that mitigate interfacial charge-separation issues. P-P bond breakage occurs in the distinctive cage-like [P9] VPQD units during longitudinal disruption, thereby exposing numerous active P sites that bond with N atoms in g-C3N4 under ultrasonic pulse excitation. The atomic-level interfacial P-N bonds of the Z-scheme VPQDs/g-C3N4 heterostructure serve as photogenerated charge-transfer channels for improved electron-hole separation efficiency. This results in excellent photocatalytic performance with a hydrogen evolution rate of 7.70 mmol g-1 h-1 (over 9.2 and 8.5 times greater than those of pure g-C3N4 and VPQDs, respectively) and apparent quantum yield of 11.68% at 400 nm. Using atomic-level chemical bonds to promote interfacial charge separation in phosphorene heterostructures is a feasible and effective design strategy for photocatalytic water-splitting materials.

Unraveling the Synergistic Mechanism of Boosted Photocatalytic H2O2 Production over Cyano-g-C3N4/In2S3/Ppy Heterostructure and Enhanced Photocatalysis-Self-Fenton Degradation Performance.

In this work, cyano contained g-C3N4 comodified by In2S3 and polypyrrole (C≡N─CN/IS/Ppy) materials are synthesized for the photocatalytic production of H2O2 and photocatalysis-self-Fenton reaction for highly efficient degradation of metronidazole. The results from UV-vis spectrophotometry, surface photovoltage, and Kelvin probe measurements reveal the promoted transport and separation efficiency of photoinduced charges after the introduction of In2S3 and Ppy in the heterojunction. The existence of a built-in electric field accelerates the photoinduced charge separation and preserves the stronger oxidation ability of holes at the valence band of C≡N─CN. Linear sweep voltammetry measurements, zeta potential analyzations, nitroblue tetrazolium determination, and other measurements show that Ppy improves the conversion ratio of •O2 - to H2O2 and the utilization ratio of •O2 -, as well as suppresses decomposition of H2O2. Accordingly, the H2O2 evolution rate produced via a two-step single-electron reduction reaction reaches almost 895 µmol L-1 h-1, a value 80% and 7.2-fold higher than those obtained with C≡N─CN/IS and C≡N─CN, respectively. The metronidazole removal rate obtained via photocatalysis-self-Fenton reaction attains 83.7% within 120 minutes, a value much higher than that recorded by the traditional Fenton method. Overall, the proposed synthesis materials and route look promising for the H2O2 production and organic pollutants degradation.

Photoinduced Deoxygenative C2 Arylation of Quinoline N-oxides with Phenylhydrazines to 2-Arylquinolines over Porous Tubular Graphitic Carbon Nitride Semiconductor Photocatalyst.

The photo-induced deoxygenative C2 arylation of quinoline N-oxides to 2-arylquinolines is achieved over a heterogeneous porous tubular graphitic carbon nitride (PTCN) catalyst with phenylhydrazines as arylation reagent. A wide range of quinoline N-oxides can be efficiently transformed into their corresponding 2-arylquinolines under visible light irradiation. Moreover, PTCN catalyst is easily separated and could be reused several times without loss to its original activity.

Design of Single-Atom Catalysts on C5N2 for Nitrogen Fixation at Ambient Conditions: A First-Principles Study.

Single atom catalysts (SACs) exhibit the flexible coordination structure of the active site and high utilization of active atoms, making them promising candidates for nitrogen reduction reaction (NRR) under ambient conditions. By the aid of first-principles calculations based on DFT, we have systematically explored the NRR catalytic behavior of thirteen 4d- and 5d-transition metal atoms anchored on 2D porous graphite carbon nitride C 5 ${_5 }$ N 2 ${_2 }$ . With high selectivity and outstanding activity, Zr, Nb, Mo, Ta, W and Re-doped C 5 ${_5 }$ N 2 ${_2 }$ are identified as potential nominees for NRR. Particularly, Mo@C 5 ${_5 }$ N 2 ${_2 }$ possesses an impressive low limiting potential of -0.39 V (corresponding to a very low temperature and atmospheric pressure), featuring the potential determining step involving *N-N transitions to *N-NH via the distal path. The catalytic performance of TM@C 5 ${_5 }$ N 2 ${_2 }$ can be well characterized by the adsorption strength of intermediate *N 2 ${_2 }$ H. Moreover, there exists a volcanic relationship between the catalytic property U L ${_{\rm{L}} }$ and the structure descriptor Ψ ${{{\Psi }}}$ , which validates the robustness and universality of Ψ ${{{\Psi }}}$ , combined with our previous study. This work sheds light on the design of SACs with eminent NRR performance.

Chlorine-Modified Soluble Melem-Based Graphitic Carbon Nitrite: Facile Synthesis, Catalytic Property and Ultrafast 2D IR Spectroscopic Characterization.

On the basis of thermal etching bulk graphitic carbon nitride (g-C3N4), a mild hydrochloric acid treatment method was used in this work to produce g-C3N4 nano-sheets (CNNS) and further carbon nitride with chloride-modification (CNCl). The latter has thinner layer and smaller particle size and exhibit greatly improved dispersibility and solubility in water, DMSO and other polar solvents. A typical photocatalytic reaction in solution driven by CNCl shows a significantly improved photocatalytic performance over bulk g-C3N4 and CNNS. Steady-state analytical tools including SEM, mass, UV-Vis and IR spectroscopies, and time-resolved two-dimensional infrared (2D IR) vibrational spectroscopy, were used together in this work. Better solubility, more flexible structure, smaller size, easier generation of free radicals and lower recombination rate of electron-hole pair, are believed to be reasons for the superior photocatalytic performance of CNCl.

Polyaniline/graphitic carbon nitride/reduced graphene oxide ternary nanocomposite film for flexible thermoelectric application.

The present study outlines the preparation of a ternary nanocomposite film comprising of polyaniline doped with camphor sulfonic acid (PANI), reduced graphene oxide (rGO), and graphitic carbon nitride (g-C3N4), and delves into its thermoelectric performance. PANI is known to possess high electrical conductivity (σ) and poor thermal conductivity (κ). However, its potential for thermoelectric applications is constrained by the low value of the Seebeck coefficient (S). The incorporation of g-C3N4in PANI has been demonstrated to result in an improvement of the Seebeck coefficient. Furthermore, the addition of rGO to the PANI/g-C3N4sample counteracts the decrease in electrical conductivity. The PANI/g-C3N4/rGO ternary nanocomposite film exhibits an enhanced Seebeck coefficient of ∼2.2 times when compared to the PANI sample. The Seebeck coefficient of the PANI/g-C3N4/rGO nanocomposite is enhanced by the energy filtering effect that occurs at the interfaces between g-C3N4/PANI and PANI/rGO. Theπ-πinteraction between the PANI chains and rGO is responsible for the increased electrical conductivity resulting from the well-ordered polymer chain arrangement on the g-C3N4and rGO surfaces. The ternary nanocomposite sample demonstrated a synergistic improvement in both electrical conductivity and Seebeck coefficient, resulting in a remarkable ∼4.6-fold increment in power factor and an ∼4.3-fold enhancement in the figure of merit (zT), as compared to the pristine PANI film.

Exploiting Photoinduced Atom Transfer Radical Polymerizations with Boron-Dopant and Nitrogen-Defect Synergy in Carbon Nitride Nanosheets.

Graphitic carbon nitrides (g-C3N4) possess various benefits as heterogeneous photocatalysts, including tunable bandgaps, scalability, and chemical robustness. However, their efficacy and ongoing advancement are hindered by challenges like limited charge-carrier separation rates, insufficient driving force for photocatalysis, small specific surface area, and inadequate absorption of visible light. In this study, boron dopants and nitrogen defects synergy are introduced into bulk g-C3N4 through the calcination of a blend of nitrogen-defective g-C3N4 and NaBH4 under inert conditions, resulting in the formation of BCN nanosheets characterized by abundant porosity and increased specific surface area. These BCN nanosheets promote intermolecular single electron transfer to the radical initiator, maintaining radical intermediates at a low concentration for better control of photoinduced atom transfer radical polymerization (photo-ATRP). Consequently, this method yields polymers with low dispersity and tailorable molecular weights under mild blue light illumination, outperforming previous reports on bulk g-C3N4. The heterogeneity of BCN enables easy separation and efficient reuse in subsequent polymerization processes. This study effectively showcases a simple method to alter the electronic and band structures of g-C3N4 with simultaneously introducing dopants and defects, leading to high-performance photo-ATRP and providing valuable insights for designing efficient photocatalytic systems for solar energy harvesting.