Bandgap Tunable Oxynitride LaNb2 O7-x Nx Nanosheets.

Bandgap tunable lanthanum niobium oxynitride [LaNb2 O7-x Nx ](1+x)- nanosheet is prepared by the delamination of a Ruddlesden-Popper phase perovskite oxynitride via ion-exchange and two-step intercalation processes. The lanthanum niobium oxynitride nanosheets have a homogeneous thickness of 1.6 nm and exhibit a variety of chromatic colors depending on the nitridation temperature of the parent-layered oxynitride. The bandgap energy of the nanosheets is determined by ultraviolet photoemission spectroscopy, Mott-Schottky, and photoelectrochemical measurements and is found to be tunable in the range of 2.03-2.63 eV. Furthermore, the oxide/oxynitride superlattice structures are fabricated by face-to-face stacking of 2D crystals using oxynitride [LaNb2 O7-x Nx ](1+x)- and oxide [Ca2 Nb3 O10 ]- nanosheets as building blocks. Moreover, the superlattices-like restacked oxynitride/oxide nanosheets hybrid exhibits unique proton conductivity and dielectric properties strongly influenced by the oxynitride nanosheets and enhanced photocatalytic activity under visible light irradiation.

Two 3D Ln(III)-MOFs Based on Phosphineoxide Ligand: Synthesis, Structure Luminescent and Photocatalytic Properties.

Two new 3D metal-organic frameworks (MOFs) ZZUT1 and ZZUT2 were prepared through the reaction of tris-(4-carboxylphenyl) phosphineoxide (H3TPO) ligand with nitrate of neodymium and praseodymium by solvothermal method. The structure, fluorescence and photocatalytic properties of ZZUT1 and ZZUT2 were studied. The crystalline structure of two 3D Ln(III)-MOFs both exhibit triclinic system and P-1 space group. The results of fluorescence analysis showed that two 3D Ln(III)-MOFs could selectively recognize acetone molecule through the fluorescence quenching mechanism. Meanwhile, ZZUT1 and ZZUT2 showed good adsorption and degradation ability on organic dye methylene blue (MB) in photocatalytic condition, and the degradation efficiency can reach to more than 90%.

Facile bio-fabrication of ZnO@AC nanoparticles from chitosan: Characterization, hydrogen generation, and photocatalytic properties.

In this work, activated carbon-supported zinc oxide nanoparticles (ZnO@AC NPs) were studied using the thermal synthesis method. The activated carbon-supported zinc oxide catalyst was characterized by UV-Vis spectrometry techniques, Fourier Transform Infrared Spectrophotometer (FTIR), Transmissive electron microscopy (TEM), and X-ray diffraction (XRD) methods. XRD characterization measurements showed that the average size of the crystal NPs was 6.89 nm. According to the TEM analysis results, the nanoparticles' average size was 11.411 nm, and the particles had a spherical structure. The catalytic properties of the synthesized material were determined using the sodium borohydride methanolysis reaction. A kinetic study was performed regarding the effects of temperature, catalyst, and substrate concentration on the methanolysis reaction. Reusability experiments showed that the catalyst had excellent catalytic activity (85%), stability, and selectivity. As a result of the kinetic study, activation energy, enthalpy (ΔH), entropy (ΔS), and hydrogen production rate activation parameters were found to be 42.52 kJ/mol, 39.98 kJ/mol, -181.42 J/mol.K, 1257.69 mL/min. g, respectively. Also, the photocatalytic activity of ZnO@AC NPs was analyzed against Rhodamine B (RhB) dye, and the maximum degradation percentage was observed to be 76% at 120 min. This study aimed to develop the ZnO@AC NPs into an efficient photocatalyst to prevent industrial wastewater pollution and as a catalyst for hydrogen synthesis as an alternative energy source.

Investigation of the photocatalytic and optical properties of the SrMoO4/g-C3N4 heterostructure obtained via sonochemical synthesis with temperature control.

In this work, nanomaterials of the SrMoO4/g-C3N4 heterostructure were synthesized in a single step by the sonochemical method with controlled temperatures. Structural and morphological investigations indicate the formation of heterojunctions, revealing the presence of g-C3N4 (CN) in the heterostructures and an interface region between the phases. Optical analyzes show broadening of the wavelength absorption range and a decrease in the photoluminescence (PL) intensity of the heterojunctions compared to the CN emission spectrum, proving a decrease in the recombination of the photogenerated charges. The results of the photocatalytic tests indicate that the insertion of CN promoted photocatalytic degradation of the Methylene Blue (MB), Rhodamine B (RhB) and Crystal Violet (CV) organic contaminants, up to 99.58%, 100% and 98.65%, respectively. The mixture of dyes used and reuse cycles was performed to analyze the applicability of the compounds in a real situation.

Nanohybrid Composites Based on TiO2 and Single-Walled Carbon Nanohorns as Promising Catalysts for Photodegradation of Amoxicillin.

In this work, applications of nanohybrid composites based on titanium dioxide (TiO2) with anatase crystallin phase and single-walled carbon nanohorns (SWCNHs) as promising catalysts for the photodegradation of amoxicillin (AMOX) are reported. In this order, TiO2/SWCNH composites were prepared by the solid-state interaction of the two chemical compounds. The increase in the SWCNH concentration in the TiO2/SWCNH composite mass, from 1 wt.% to 5 wt.% and 10 wt.% induces (i) a change in the relative intensity ratio of the Raman lines located at 145 and 1595 cm-1, which are attributed to the Eg(1) vibrational mode of TiO2 and the graphitic structure of SWCNHs; and (ii) a gradual increase in the IR band absorbance at 1735 cm-1 because of the formation of new carboxylic groups on the SWCNHs' surface. The best photocatalytic properties were obtained for the TiO2/SWCNH composite with a SWCNH concentration of 5 wt.%, when approx. 92.4% of AMOX removal was achieved after 90 min of UV irradiation. The TiO2/SWCNH composite is a more efficient catalyst in AMOX photodegradation than TiO2 as a consequence of the SWCNHs' presence, which acts as a capture agent for the photogenerated electrons of TiO2 hindering the electron-hole recombination. The high stability of the TiO2/SWCNH composite with a SWCNH concentration of 5 wt.% is proved by the reusing of the catalyst in six photodegradation cycles of the 98.5 µM AMOX solution, when the efficiency decreases from 92.4% up to 78%.

Photocatalytic Activity of the Blends Based on TiO2 Nanoparticles and Reduced Graphene Oxide for Degradation of Acetaminophen.

The aim of this work is to highlight the influence of blends based on TiO2 nanoparticles and reduced graphene oxide (RGO) on the photodegradation of acetaminophen (AC). To this end, the catalysts of TiO2/RGO blends with RGO sheet concentrations equal 5, 10, and 20 wt. % were prepared by the solid-state interaction of the two constituents. The preferential adsorption of TiO2 particles onto the RGO sheets' surfaces via the water molecules on the TiO2 particle surface was demonstrated by FTIR spectroscopy. This adsorption process induced an increase in the disordered state of the RGO sheets in the presence of the TiO2 particles, as highlighted by Raman scattering and scanning electron microscopy (SEM). The novelty of this work lies in the demonstration that TiO2/RGO mixtures, obtained by the solid-phase interaction of the two constituents, allow an acetaminophen removal of up to 95.18% after 100 min of UV irradiation. This TiO2/RGO catalyst induced a higher photodegradation efficiency of AC than TiO2 due to the presence of RGO sheets, which acted as a capture agent for the photogenerated electrons of TiO2, hindering the electron-hole recombination. The reaction kinetics of AC aqueous solutions containing TiO2/RGO blends followed a complex first-order kinetic model. Another novelty of this work is the demonstration of the ability of PVC membranes modified with Au nanoparticles to act both as filters for the removal of TiO2/RGO blends after AC photodegradation and as potential SERS supports, which illustrate the vibrational properties of the reused catalyst. The reuse of the TiO2/RGO blends after the first cycle of AC photodegradation indicated their suitable stability during the five cycles of pharmaceutical compound photodegradation.

Effects of Co Doping on the Growth and Photocatalytic Properties of ZnO Particles.

The present work reports on the synthesis of ZnO photocatalysts with different Co-doping levels via a facile one-step solution route. The structural and optical properties were characterized by powder X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS), and UV-Vis diffuse reflectance spectra. The morphology of Co-doped ZnO depends on the reaction temperature and the amount of Co and counter-ions in the solution. Changes with the c-axis lattice constant and room temperature redshift show the replacement of Zn with Co ions without changing the wurtzite structure. Photocatalytic activities of Co-doped ZnO on the evolution of H2 and the degradation of methylene blue (MB) reduce with the doping of Co ions. As the close ionic radii of Co and Zn, the reducing photocatalytic activity is not due to the physical defects but the formation of deep bandgap energy levels. Photocurrent response experiments further prove the formation of the recombination centers. Mechanistic insights into Co-ZnO formation and performance regulation are essential for their structural adaptation for application in catalysis, energy storage, etc.

Rhodamine B Photodegradation in Aqueous Solutions Containing Nitrogen Doped TiO2 and Carbon Nanotubes Composites.

In this work, new results concerning the potential of mixtures based on nitrogen doped titanium dioxide (TiO2:N) and carbon nanotubes (CNTs) as possible catalyst candidates for the rhodamine B (RhB) UV photodegradation are reported. The RhB photodegradation was evaluated by UV-VIS absorption spectroscopy using samples of TiO2:N and CNTs of the type of single-walled carbon nanotubes (SWNTs), double-wall carbon nanotubes (DWNTs), multi-wall carbon nanotubes (MWNTs), and single-walled carbon nanotubes functionalized with carboxyl groups (SWNT-COOH) having various concentrations of CNTs. The best photocatalytic performance was obtained for sample containing TiO2:N and 2.5 wt.% SWNTs-COOH, when approx. 85% of dye removal was achieved after 300 min. of UV irradiation. The reaction kinetics of RhB aqueous solutions containing TiO2:N/CNT mixtures followed a complex first-order kinetic model. The TiO2:N/CNTs catalyst induced higher photodegradation efficiency of RhB than TiO2:N due to the presence of CNTs, which act as adsorbent and dispersing agent and capture the photogenerated electrons of TiO2:N hindering the electron-hole recombination.

Photocatalytic properties of graphene-supported titania clusters from density-functional theory.

Density-functional theory calculations of (TiO2 )n clusters (n = 1-5) in the gas phase and adsorbed on pristine graphene as well as graphene quantum dots are presented. The cluster adsorption is found to be dominated by van der Waals forces. The electronic structure and in particular the excitation energies of the bare clusters and the TiO2 /graphene composites are found to vary largely in dependence on the size of the respective constituents. This holds in particular for the energy and the spatial localization of the highest occupied and lowest unoccupied molecular orbitals. In addition to a substantial gap narrowing, a pronounced separation of photoexcited electrons and holes is predicted in some instances. This is expected to prolong the lifetime of photoexcited carriers. Altogether, TiO2 /graphene composites are predicted to be promising photocatalysts with improved electronic and photocatalytic properties compared to bulk TiO2 .

ZnO Nanoparticles for Photocatalytic Application in Alkali-Activated Materials.

This paper reports an Alkali-Activated Materials (AAM) using two different precursors, metakaolin and a metallurgical slag with photocatalytic zinc oxide nanoparticles, as novel photocatalytic composites. The photodegradation performance of the composites using methylene blue (MB) dye as a wastewater model was investigated by ultraviolet radiations (UV-vis) spectroscopy. Adsorption in dark conditions and photodegradation under UV irradiation are the mechanisms for removing MB dye. The pseudo-first-order kinetic and pseudo-second-order kinetic models were employed, and the experimental data agreed with the pseudo-second-order model in both cases with UV and without UV irradiations. As new photocatalytic materials, these composites offer an alternative for environmental applications.

Anatase TiO2 Nanosheets Exposed {001} Facet: Solvent Effects on the Photocatalytic Performance.

Anatase TiO2 with exposed {001} facets were synthesized via solvothermal method by using titanium (IV) butoxide as Ti source, hydrofluoric acid as capping agent and alcohol as solvent. Different alcohols such as methanol, ethanol, isopropyl alcohol, and n-butanol were investigated systematically. As-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscope and transmission electron microscope. The results indicated that regular TiO2 nanosheets were created from ethanol and isopropanol alcohol even though the size and thickness changed. However, TiO2 nanosheets were attached together in methanol and n-butanol. The reasons of solvent effect the morphology and properties of TiO2 crystals exposed {001} facets have been discussed. The photocatalysis investigation of samples was carried out by degradating methyl orange under ultraviolet light irradiation. TiO2 nanosheets obtained in ethanol solvent exhibited superior photocatalytic performance compared with other samples. The reasons could attribute to TiO2 nanosheets obtained in ethanol solvent with higher specific surface area, mesoporous structure, and exposed highly active {001} facets.

Preparation and photocatalytic properties of porous C and N co-doped TiO2 deposited on brick by a fast, one-step microwave irradiation method.

A one-step microwave irradiation method was used to deposit carbon and nitrogen co-doped TiO2 ((C, N)-TiO2) on commercial brick ((C, N)-TiO2/brick). The as-prepared samples were characterized by X-ray diffraction, ultraviolet-visible (UV-vis) diffuse reflectance spectroscopy, photoluminescence spectroscopy, X-ray photoelectron spectroscopy, and scanning electron microscopy (SEM). A selective technique was also used to investigate the concentration of hydroxyl radicals during UV-vis irradiation of the Methyl Orange solution with the as-prepared samples. The C and N dopants enhanced visible light absorption and provided a longer lifetime for the photo-generated electron-hole pairs. The SEM images showed that the as-prepared sample is porous. The dark adsorption and photodegradation test for (C, N)-TiO2/brick showed good photodegradation and good recyclability. The best photodegradation rate was 94% after 2hr. The maximum degradation rate was maintained even after the 6th cycle. The good photocatalytic properties are attributed to the enhanced visible light absorption, enhanced pollutant adsorption arising from the porous structure of the (C, N)-TiO2 thin film, and longer lifetime of the photo-generated electron-hole pairs. (C, N)-TiO2/brick should have potential commercial applications in photodegradation processes because of its low cost, good photodegradation, and excellent recyclability.

Photocatalytic properties of hierarchical BiOXs obtained via an ethanol-assisted solvothermal process.

In this study, bismuth oxyhalide (BiOXs (XCl, Br, I)) semiconductors were prepared by a simple solvothermal method, with ethanol serving as solvent and a series of tetrabutylammonium halide surfactants as halogen sources. Under identical synthetic conditions, BiOBr was more readily constructed into regular flower-like hierarchical architectures. The photocatalytic properties of the materials were studied by monitoring the degradation of rhodamine B (RhB), with visible light absorption, and colorless salicylic acid (SA). It was found that both RhB and SA were rapidly degraded on the surface of BiOBr. BiOCl was rather active for the degradation of RhB, but ineffective toward the degradation of SA. However, neither RhB nor SA could be degraded effectively in the case of BiOI. Further experiments such as UV-visible spectroscopy and detection of OH and O2(-) radicals suggest that the electronic structure of the BiOX photocatalysts is responsible for the difference in their activities.

Effect of Co Doping on the Physical Properties and Organic Pollutant Photodegradation Efficiency of ZnO Nanoparticles for Environmental Applications.

This paper presents a comprehensive investigation of the synthesis and characterization of Zn1-xCoxO (0 ≤ x ≤ 0.05) nanopowders using a chemical co-precipitation approach. The structural, morphological, and vibrational properties of the resulting ZnO nanostructures were assessed through X-ray diffraction, scanning electronic microscopy, and Raman spectroscopy to examine the influence of cobalt doping. Remarkably, a notable congruence between the experimental results and the density functional theory (DFT) calculations for the Co-doped ZnO system was achieved. Structural analysis revealed well-crystallized hexagonal wurtzite structures across all samples. The SEM images demonstrated the formation of spherical nanoparticles in all the samples. The vibrational properties confirmed the formation of a hexagonal wurtzite structure, with an additional Raman peak corresponding to the F2g vibrational mode characteristic of the secondary phase of ZnCo2O4 observed at a 5% cobalt doping concentration. Furthermore, a theoretical examination of cobalt doping's impact on the elastic properties of ZnO demonstrated enhanced mechanical behavior, which improves stability, recyclability, and photocatalytic activity. The photocatalytic study of the synthesized compositions for methylene blue (MB) dye degradation over 100 min of UV light irradiation demonstrated that Co doping significantly improves photocatalytic degradation. The material's prolonged lifetime, reduced rate of photogenerated charge carrier recombination, and increased surface area were identified as pivotal factors accelerating the degradation process. Notably, the photocatalyst with a Zn0.99Co0.01O composition exhibited exceptional efficiency compared to that reported in the literature. It demonstrated high removal activity, achieving an efficiency of about 97% in a shorter degradation time. This study underscores the structural and photocatalytic advancements in the ZnO system, particularly at lower cobalt doping concentrations (1%). The developed photocatalyst exhibits promise for environmental applications owing to its superior photocatalytic performance.

The Hydrothermal-Assisted Approach Improves the Photocatalytic and Energy Storage Performance of Novel CuSe-TiO2-GO Composite.

This study reports a novel CuSe-TiO2-GO composite, synthesized by a facile hydrothermal method at a controlled temperature, and investigates its electrochemical performance for supercapacitors (SCs) and photocatalytic behavior for degrading methylene blue (MB) dye. The compositional phase structure and chemical bond interaction were thoroughly investigated. The as-fabricated pristine, binary, and ternary composites underwent comprehensive characterization employing spectroscopic techniques and electrochemical analysis. Compared with pure and binary compounds (CuSe, TiO2, and binary CuSe-TiO2 composites), the ternary CuSe-TiO2-GO composites demonstrated a high degradation efficiency while degrading MB in less than just 80 min (240 min, 100 min, and 140 min, respectively). The photocatalytic activity of the ternary CuSe-TiO2-GO composites is enhanced due to the highly positive conduction band of CuSe, leading to the quick excitation of electrons to the conduction band of CuSe. Subsequently, graphene oxide (GO) left holes on the photocatalyst surface for MB, as GO assisted the photoexcited electron-hole pairs, resulting in enhanced photocatalytic performance. The CuSe-TiO2-GO electrode for the supercapacitor indicates a 310.6 F/g and 135.2 F/g capacitance when the discharge current upsurges from 1 to 12 A/g. The good photocatalytic and energy storage performance is due to the smaller charge transfer resistance, which promotes efficient separation of electron-hole pairs.

Evaluation on photocatalytic activity of bismuth nitrate derived materials at different calcination temperatures using paper microzones method.

Our work reveals for the first time that directly calcined bismuth nitrate derivatives (BNDs) possess significant photocatalytic activity towards rhodamine B (RhB). As the calcination temperature increased, the Bi(NO3)3·5H2O powder gradually ruptured and transformed into different bismuth nitrate products and their mixtures, finally into stable α-Bi2O3 at 500 °C. Among them, BNDs-100 could achieve 100 % photocatalytic degradation of 10 mg/L RhB solution under UV irradiation for 6 min. The ImageJ-led paper microzones (PMZs) method is introduced for the first time into the performance evaluation process of photocatalysts, which can achieve the green chemistry pathway and the rapid evaluation of different catalysts. The accuracy of the results of the PMZs method relative to the spectrophotometric method was up to 91.14 %, which has a better reliability and is suitable for qualitative analysis, and a certain ability when used for quantitative analysis. The results showed that the PMZs method was used to assess the photocatalytic degradation of rhodamine B by bismuth nitrate-derived materials at different calcination temperatures with well reliability, and the preparation of BNDs by direct calcination was a simple and effective strategy.

Enhanced photocatalytic activity of green synthesized zinc oxide nanoparticles using low-cost plant extracts.

Developing stable and highly efficient metal oxide photocatalysts remains a significant challenge in managing organic pollutants. In this study, zinc oxide nanoparticles (ZnO NPs) were successfully synthesized using various plant extracts, pomegranate (P.M), beetroot roots (B.S), and seder, along with a chemical process. The produced ZnO NPs were characterized using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), ultraviolet-visible spectroscopy (UV-Vis), Field Emission Scanning Electron Microscope (FESEM), High-Resolution Transmission Electron Microscopy (HRTEM), and Surface Area. For all prepared samples, the results indicated that the composition of the plant extract affects several characteristics of the produced particles, such as their photocatalytic properties, energy bandgap (Eg), particle size, and the ratio of the two intensity (0 0 2) and (1 0 0) crystalline planes. The particle size of the produced NPs varies between 20 and 30 nm. To examine NPs' photocatalytic activity in the presence of UV light, Methyl Orange (MO) was utilized. The Eg of  ZnO synthesized by the chemical method was 3.16 e. V, whereas it was 2.84, 2.63, and 2.59 for P.M, Seder, and B.S extracts, respectively. The most effective ZnO NPs, synthesized using Beetroots, exhibited a degradation efficiency of 87 ± 0.5% with a kinetic rate constant of 0.007 min-1. The ratio of the two intensity (0 0 2) and (1 0 0) crystalline planes was also examined to determine a specific orientation in (0 0 2) that is linked to the production of oxygen vacancies in ZnO, which enhances their photocatalytic efficiency. Furthermore, the increase in photocatalytic effectiveness can be attributed to the improved light absorption by the inter-band gap states and effective charge transfer.

Synthesis, characterization, and photocatalytic activities of green sol-gel ZnO nanoparticles using Abelmoschus esculentus and Salvia officinalis: A comparative study versus co-precipitation-synthesized nanoparticles.

Background: The development of green chemistry methods involving plant-based nanoparticle synthesis presents an affordable and eco-friendly approach for wastewater treatment and color removal. This study aimed to synthesize ZnO nanoparticles using the sol-gel method with Salvia officinalis and Abelmoschus esculentus plants, examining their photocatalytic efficiency for organic dye removal. Methods: To compare the properties of ZnO nanoparticles, another type of ZnO-NPs was synthesized using the co-precipitation method. The characterization of synthesized nanoparticles was performed using thermogravimetric analysis (TGA-DTG), X-ray diffraction (XRD), Dynamic Light Scattering (DLS), Zeta potential (ZP), field emission scanning electron microscopy (FE-SEM), Energy Dispersive X-ray (EDX), Fourier transform infrared spectroscopy (FTIR), and UV-Vis spectrophotometry. Results: Based on XRD results, the average crystalline size of nanoparticles was calculated using the Debye-Scherer equation for synthesized nanoparticles using the S. officinalis at 22.99 nm and for the A. esculentus at 29.79 nm, and for the co-precipitation method at 18.83 nm. The FE-SEM images showed spherical ZnO nanoparticles. Photocatalytic properties of ZnO-NPs were investigated for remove of methylene blue organic dye in the presence of UV light. The pH 10 was identified as the best pH, which had the highest percentage of color degradation. All three types of nanoparticles were tested by up to 360 min to optimize the dyeing time. For A. esculentus, the highest percentage of color removal occurred in the first 90 min (41.0 %), for S. officinalis nanoparticles between 75 and 90 min (86.9 %), and for chemically synthesized nanoparticles between 30 and 45 min (100 %). Conclusions: In conclusion, the best MB dye degradation capacity belonged to co-precipitation ZnO nanoparticles followed by S. officinalis and A. esculentus nanoparticles.

Photocatalytic degradation of 2,4-dichlorophenoxyacetic acid by electrospun TiO2 nanofibres synthesised from two different titanium molecular precursors.

The evaluation of the photocatalytic properties of electrospun TiO2 nanofibres (TiO2-NFs) synthesised in the same experimental conditions using two distinct precursors, tetraisopropyl orthotitanate (TTIP) and tetrabutyl orthotitanate (TNBT), with morphology and crystalline structure controlled by annealing at 460 °C for 3 h is presented. The presence of circular-shaped TiO2-NFs was corroborated by scanning electron microscopy (SEM). By using X-ray photoelectron spectroscopy (XPS), the chemical binding energies and their interactions of the TiO2 with the different incorporated impurities were determined; the most intense photoelectronic transitions of Ti 2p3/2 (458.39 eV), O 1 s (529.65 eV) and C 1 s (284.51 eV) were detected for TTIP and slightly blue-shifted for TNBT. By using energy-dispersive X-ray spectroscopy (EDS), the chemical element percentages in TiO2 were determined. Using X-ray diffraction, it was found that the annealed electrospun TiO2-NFs presented the anatase crystalline phase and confirmed by Raman scattering. Bandgap energies were determined by diffuse reflectance spectroscopy at room temperature. The photocatalytic degradation of 2,4-dichlorophenoxyacetic acid (2,4-D) herbicide under exposure to ultraviolet light was studied using the TiO2-NFs obtained with the two molecular precursors. The results showed that the catalyst, prepared with the TTIP precursor, turned out to be the one that presented the highest photocatalytic activity with a half-life time (t1/2) of 28 min and a degradation percentage of 93%. The total organic carbon (TOC) in the solutions resulting from the 2,4-D degradation by the TiO2-NFs was measured, which showed a TOC removal of 50.67% for the TTIP sample and 36.14% for the TNBT sample. Finally, by using FTIR spectroscopy, the final chemical compounds of the degradation were identified as H2O and CO2.

Photocatalytic Evaluation and Application as a Sensor for the Toxic Atmospheres (Propane and Carbon Monoxide) of Nickel Antimonate (NiSb2O6) Powders.

Nickel antimonate (NiSb2O6) powders were synthesized using a wet chemistry process assisted by microwave radiation and calcination from 600 to 700 °C to evaluate their photocatalytic and gas-sensing properties. The crystalline phase obtained at 800 °C of trirutile-type nickel antimonate was confirmed with powder X-ray diffraction. The morphology and size of the nanostructures were analyzed employing electron microscopy (SEM and TEM), identifying irregular particles and microrods (~277 nm, made up of polyhedral shapes of size ~65 nm), nanorods with an average length of ~77 nm, and nanostructures of polyhedral type of different sizes. UV-vis analysis determined that the bandgap of the powders obtained at 800 °C was ~3.2 eV. The gas sensing tests obtained a maximum response of ~5 for CO (300 ppm) at 300 °C and ~10 for C3H8 (500 ppm) at 300 °C. According to these results, we consider that NiSb2O6 can be applied as a gas sensor. On the other hand, the photocatalytic properties of the antimonate were examined by monitoring the discoloration of malachite green (MG) at five ppm. MG concentration monitoring was carried out using UV-visible spectroscopy, and 85% discoloration was achieved after 200 min of photocatalytic reaction.