RESUMO
Stimuli-triggered generation of complicated 3D shapes from 2D strips or plates without using sophisticated molds is desirable and achieving such 2D-to-3D shape transformation in combination with shape reconfiguration, welding, and reprogramming on a single material is very challenging. Here, a convenient and facile strategy using the solution of a disulfide-containing diamine for patterned secondary crosslinking of an optical shape-memory polymer network is developed to integrate the above performances. The dangling thiolectones attached to the backbones react with the diamine in the solution-deposited region so that the secondary crosslinking may not only weld individual strips into assembled 3D shapes but also suppress the relaxation of the deformed polymer chains to different extents for shape reconfiguration or heating-induced complex 3D deformations. In addition, as the dynamic disulfide bonds can be thermally activated to erase the initial programming information and the excessive thiolectones are available for subsequent patterned crosslinking, the material also allows shape reprogramming. Combining welding with patterning treatment, it is further demonstrated that a gripper can be assembled and photothermally controlled to readily grasp an object.
RESUMO
In recent years, there has been rapid development in the field of shape memory materials with active deformation performance. However, bismaleimide, a widely used thermosetting material in aerospace, has been largely overlooked in shape memory applications. This work presents the synthesis of a molecule containing an alkene bond adjacent to an oxygen atom. Through molecular design, a one-time reaction between this specialized molecule and the bismaleimide molecule is successfully achieved, facilitated by the steric hindrance effect. Therefore, a new series of shape memory bismaleimide materials are obtained. By introducing a diamine to adjust the chain length, the properties of material are further improved, resulting in increasing static modulus by 506 times. The synthesized materials exhibit a broad glass transition temperature (Tg) range exceeding 153 °C, remarkable stiffness tunability. Notably, in the synthesis process of this materials series, the disulfide bonds are introduced, which facilitates the realization of self-healing and reprocessable functionalities in the resulting thermosetting materials. This significant advancement lays a solid foundation for the future recycling and reuse of aircraft, satellites, and other equipment, offering promising prospects for enhancing sustainability and efficiency within the aerospace industry.
RESUMO
The designed synthesis of a crystalline azulene-based covalent organic framework (COF-Azu-TP) is presented and its photothermal property is investigated. Azulene, a distinctive 5-7 fused ring non-benzenoid aromatic compound with a large intramolecular dipole moment and unique photophysical characteristics, is introduced as the key feature in COF-Azu-TP. The incorporation of azulene moiety imparts COF-Azu-TP with broad-spectrum light absorption capability and interlayer dipole interactions, which makes COF-Azu-TP a highly efficient photothermal conversion material. Its polyurethane (PU) composite exhibits a solar-to-vapor conversion efficiency (97.2%) and displays a water evaporation rate (1.43 kg m-2 h-1) under one sun irradiation, even at a very low dosage of COF-Azu-TP (2.2 wt%). Furthermore, COF-Azu-TP is utilized as a filler in a polylactic acid (PLA)/polycaprolactone (PCL) composited shape memory material, enabling rapid shape recovery under laser stimulation. A comparison study with a naphthalene-based COF isomer further emphasizes the crucial role of azulene in enhancing photothermal conversion efficiency. This study demonstrates the significance of incorporating specific building blocks into COFs for the development of functional porous materials with enhanced properties, paving the way for future applications in diverse fields.
RESUMO
Intelligent materials derived from green and renewable bio-based materials garner widespread attention recently. Herein, shape memory polyurethane composite (PUTA/Fe) with fast response to near-infrared (NIR) light is successfully prepared by introducing Fe3+ into the tannic acid-based polyurethane (PUTA) matrix through coordination between Fe3+ and tannic acid. The results show that the excellent NIR light response ability is due to the even distribution of Fe3+ filler with good photo-thermal conversion ability. With the increase of Fe3+ content, the NIR light response shape recovery rate of PUTA/Fe composite films is significantly improved, and the shape recovery time is reduced from over 60 s to 40 s. In addition, the mechanical properties of PUTA/Fe composite film are also improved. Importantly, owing to the dynamic phenol-carbamate network within the polymer matrix, the PUTA/Fe composite film can reshape its permanent shape through topological rearrangement and show its good NIR light response shape memory performance. Therefore, PUTA/Fe composites with high content of bio-based material (TA content of 15.1-19.4%) demonstrate the shape memory characteristics of fast response to NIR light; so, it will have great potential in the application of new intelligent materials including efficient and environmentally friendly smart photothermal responder.
Assuntos
Carbamatos , Raios Infravermelhos , Ferro , Poliuretanos , Taninos , Taninos/química , Poliuretanos/química , Ferro/química , Carbamatos/química , Fenóis/química , Fenol/química , Materiais Inteligentes/química , PolifenóisRESUMO
Bioinspired smart superwetting surfaces with special wettability have aroused great attention from fundamental research to technological applications including self-cleaning, oil-water separation, anti-icing/corrosion/fogging, drag reduction, cell engineering, liquid manipulation, and so on. However, most of the reported smart superwetting surfaces switch their wettability by reversibly changing surface chemistry rather than surface microstructure. Compared with surface chemistry, the regulation of surface microstructure is more difficult and can bring novel functions to the surfaces. As a kind of stimulus-responsive material, shape-memory polymer (SMP) has become an excellent candidate for preparing smart superwetting surfaces owing to its unique shape transformation property. This review systematically summarizes the recent progress of smart superwetting SMP surfaces including fabrication methods, smart superwetting phenomena, and related application fields. The smart superwettabilities, such as superhydrophobicity/superomniphobicity with tunable adhesion, reversible switching between superhydrophobicity and superhydrophilicity, switchable isotropic/anisotropic wetting, slippery surface with tunable wettability, and underwater superaerophobicity/superoleophobicity with tunable adhesion, can be obtained on SMP micro/nanostructures by regulating the surface morphology. Finally, the challenges and future prospects of smart superwetting SMP surfaces are discussed.
RESUMO
The current work presents the study of a semicrystalline, shape memory polymer synthesized by simultaneous free radical polymerization and crosslinking in a blend of polybutadiene (PB) and octadecyl acrylate. Blending elastomers and phase change materials provide a modular method for new smart materials, such as shape memory polymers. In this system, grafted, side-chain crystalline poly(octadecyl acrylate) (PODA) fixes a programmed shape in the shape memory cycle, while crosslinked polybutadiene drives shape recovery. This work focuses on improving material parameters important for shape memory (crystallinity, gel fraction, melting temperature) by tuning the processing and formulation parameters (amount of crosslinker and PB weight fraction). The result is a shape memory PB-PODA copolymer that can be fabricated by melt processing and programmed without cooling below ambient temperature. It is found that good shape memory (i.e., high shape fixity and recovery) is obtained at a low PB weight fraction where a percolating PODA crystal network is formed at room temperature. The optimized sample shows excellent shape memory properties (fixity > 99%, recovery = 96%). It is shown that it is possible to mold this material into complex 3D shapes or topography with potential use in anticounterfeiting and antitampering applications.
Assuntos
Elastômeros , Polímeros , Polímeros/química , Polimerização , Acrilatos/químicaRESUMO
The rapid development of 4D printing provides a potential strategy for the fabrication of deployable medical devices (DMD). The minimally invasive surgery to implant the DMD into the body is critical, 4D printing DMD allows the well-defined device to be implanted with a high-compacted shape and transformed into their designed shape to meet the requirement. Herein, a 4D printing tissue engineering material is developed with excellent biocompatibility and shape memory effect based on the photocrosslinked polycaprolactone (PCL). The fast thiol-acrylate click reaction is applied for photocrosslinking of the acrylates capped star polymer (s-PCL-MA) with poly-thiols, that enable the 3D printing for the DMD fabrication. The cell viability, erythrocyte hemolysis, and platelet adhesion results indicate the excellent biocompatibility of the 4D printing polymer, especially the biological subcutaneous implantation results confirm the promote tissue growth and good histocompatibility. A 4D printing stent with deformable shape and recovery at a temperature close to human body temperature demonstrated the potential application as DMD. In addition, the everolimus is loaded to the polymer (ps1-PCL) through host-guest coordination with ß-cyclodextrin as the core of the star polymer, which shows sustained drug release and improved body's inflammatory response.
Assuntos
Materiais Inteligentes , Humanos , Polímeros , Engenharia Tecidual/métodos , Liberação Controlada de Fármacos , Impressão TridimensionalRESUMO
The emerging field of regenerative medicine holds immense promise for addressing complex tissue and organ regeneration challenges. Central to its advancement is the evolution of additive manufacturing techniques, which have transcended static constructs to embrace dynamic, biomimetic solutions. This manuscript explores the pivotal role of smart materials in this transformative journey, where materials are endowed with dynamic responsiveness to biological cues and environmental changes. By delving into the innovative integration of smart materials, such as shape memory polymers and stimulus-responsive hydrogels, into additive manufacturing processes, this research illuminates the potential to engineer tissue constructs with unparalleled biomimicry. From dynamically adapting scaffolds that mimic the mechanical behavior of native tissues to drug delivery systems that respond to physiological cues, the convergence of smart materials and additive manufacturing heralds a new era in regenerative medicine. This manuscript presents an insightful overview of recent advancements, challenges, and future prospects, underscoring the pivotal role of smart materials as pioneers in shaping the dynamic landscape of regenerative medicine and heralding a future where tissue engineering is propelled beyond static constructs towards biomimetic, responsive, and regenerative solutions.
Assuntos
Medicina Regenerativa , Materiais Inteligentes , Materiais Biocompatíveis , Biomimética/métodos , Impressão Tridimensional , Medicina Regenerativa/métodos , Engenharia Tecidual/métodosRESUMO
Flexible intelligent materials are desired to effectively regulate their own deformation and accurately sense their immediate morphology at the same time. Graphene foam is an attractive material for strain sensing and electrical/thermal performance control due to its outstanding mechanical, electrical, and thermal properties. However, graphene-foam-based materials with both strain sensing and deformation control capabilities are rarely reported. Here, a multiscale design of graphene foam with a single-layer-graphene-dominated microstructure and resilient 3D network architecture, which leads to exceptional strain sensing performance as well as modulation ability of the electrical and thermal conductivity for shape memory polymers, is reported. The graphene foams exhibit a strain detection limit of 0.033%, a rapid response of 53 ms, long-term stability over 10 000 cycles, significant thermoacoustic effect, and great heat-generation and heat-diffusion ability. By combining these advantages, an electro-activated shape-memory composite that is capable of monitoring its own shape state during its morphing process, is demonstrated.
RESUMO
Shape memory polymers (SMPs) are a class of smart materials that change shape when stimulated by environmental stimuli. Different from the shape memory effect at the macro level, the introduction of micro-patterning technology into SMPs strengthens the exploration of the shape memory effect at the micro/nano level. The emergence of shape memory micro/nano patterns provides a new direction for the future development of smart polymers, and their applications in the fields of biomedicine/textile/micro-optics/adhesives show huge potential. In this review, the authors introduce the types of shape memory micro/nano patterns, summarize the preparation methods, then explore the imminent and potential applications in various fields. In the end, their shortcomings and future development direction are also proposed.
Assuntos
Polímeros , TêxteisRESUMO
Shape memory polymers (SMPs), although offer a suite of advantages such as ease of processability and lower density, lag behind their shape memory alloy counterparts, in terms of mechanical properties such as recovery stress and cyclability. Reinforcing SMPs with inorganic nanowires and carbon nanotubes (CNTs) is a sought-after pathway for tailoring their mechanical properties. Here, inorganic nanowires also offer the added advantage of covalently binding the fillers to the surrounding polymer matrices via organic molecules. The SMP composites (SMPCs) thus obtained have well-engineered nanowire-polymer interfaces, which could be used to tune their mechanical properties. A well-known method of fabricating SMPCs involving casting dispersions of nanowires (or CNTs) in mixtures of monomers and crosslinkers typically results in marginal improvements in the mechanical properties of the fabricated SMPCs. This is owed to the constraints imposed by the rule-of-mixture principles. To circumvent this limitation, a new method for SMPC fabrication is designed and presented. This involves infiltrating polymers into pre-fabricated nanowire foams. The pre-fabricated foams were fabricated by consolidating measured quantities of nanowires and a sacrificial material, such as (NH4)2CO3, followed by heating the consolidated mixtures for subliming the sacrificial material. Similar to the case of traditional composites, use of silanes to functionalize the nanowire surfaces allowed for the formation of bonds between both the nanowire-nanowire and the nanowire-polymer interfaces. SMPCs fabricated using TiO2nanowires and SMP composed of neopentyl glycol diglycidyl ether and poly(propylene glycol) bis(2-aminopropyl ether) (Jeffamine D230) in a 2:1 molar ratio exhibited a 300% improvement in the elastic modulus relative to that of the SMP. This increase was significantly higher than SMPC made using the traditional fabrication route. Well-known powder metallurgy techniques employed for the fabrication of these SMPCs make this strategy applicable for obtaining other SMPCs of any desired shape and chemical composition.
RESUMO
Gecko feet consist of numerous micro/nano hierarchical hairs and exhibit a high adhesion onto various surfaces by van der Waals forces. The gecko, despite its mighty adhesion, can travel efficiently with a rapid adhesion switching due to the end of the hairs on the gecko feet are slanted in one direction. Herein, a shape memory polymer (SMP)-based switchable dry adhesive (SSA), inspired by gecko feet, having tremendous surface adaptability and adhesion switching capability, is reported. The SSA shows not only high adhesion to the various surfaces (≈332.8 kPa) but also easy detachment (nearly 3.73 kPa) due to the characteristic of SMP, which can reversibly recover from a deformed shape to its initial shape. On the basis of the novel adhesion switching property, it is suggested the SSA-applied advanced glass transfer system can lead to feasible application. This experiment confirms that an ultrathin and light glass film is transferred easily and sustainably, and it is believed that the SSA may be a breakthrough and a powerful alternative for not only conventional dry adhesives but also the next-level transfer systems.
Assuntos
Lagartos , Materiais Inteligentes , Adesividade , Adesivos , AnimaisRESUMO
The shape memory effect is the capability of a structure or a material that can be deformed into a certain temporary shape under external stimulus, and the shape will be fixed without the stimulus. The recovery process can be triggered by the same stimulus. The intelligent tunable device based on the shape memory effect has a wide range of applications in many fields. In the optical field, smart diffraction gratings can accomplish in situ optical diffractions according to requirements, meeting the high demand in the next generation of smart optical systems. However, it is essential to construct high-precision grating structures based on shape memory materials. Here, a smart diffraction grating based on UV-curable shape memory polymers (SMPs) via two-beam interference is reported, with nano-scale precision, excellent deformability and recovery ability, and adjustable spectroscopic performance. More importantly, based on the shape memory effect, grating structures that surpass the precision of the fabrication system can be obtained. The smart grating exhibits rapid deformation and recovery upon heating and long-term storage capability, which facilitates them to be applied in optics, electronics, and integrated sensing.
Assuntos
Polímeros , Materiais Inteligentes , Óptica e Fotônica , Polímeros/químicaRESUMO
The recent burst of research on smart materials is a clear evidence of the growing interest of the scientific community, industry, and society in the field. The exploitation of the great potential of stimuli-responsive materials for sensing, actuation, logic, and control applications is favored and supported by new manufacturing technologies, such as electrospinning, that allows to endow smart materials with micro- and nanostructuration, thus opening up additional and unprecedented prospects. In this wide and lively scenario, this article systematically reviews the current advances in the development of thermoactive electrospun fibers and textiles, sorting them, according to their response to the thermal stimulus. Hence, several platforms including thermoresponsive systems, shape memory polymers, thermo-optically responsive systems, phase change materials, thermoelectric materials, and pyroelectric materials, are described and critically discussed. The difference in active species and outputs of the aforementioned categories is highlighted, evidencing the transversal nature of temperature stimulus. Moreover, the potential of novel thermoactive materials are pointed out, revealing how their development could take to utmost interesting achievements.
Assuntos
Nanofibras , TemperaturaRESUMO
Shape-Memory Polymers (SMPs) are considered a kind of smart material able to modify size, shape, stiffness and strain in response to different external (heat, electric and magnetic field, water or light) stimuli including the physiologic ones such as pH, body temperature and ions concentration. The ability of SMPs is to memorize their original shape before triggered exposure and after deformation, in the absence of the stimulus, and to recover their original shape without any help. SMPs nanofibers (SMPNs) have been increasingly investigated for biomedical applications due to nanofiber's favorable properties such as high surface area per volume unit, high porosity, small diameter, low density, desirable fiber orientation and nanoarchitecture mimicking native Extra Cellular Matrix (ECM). This review focuses on the main properties of SMPs, their classification and shape-memory effects. Moreover, advantages in the use of SMPNs and different biomedical application fields are reported and discussed.
Assuntos
Nanofibras/uso terapêutico , Polímeros/farmacologia , Materiais Inteligentes/química , Animais , Materiais Biocompatíveis/química , Engenharia Biomédica/métodos , Engenharia Biomédica/tendências , Humanos , Nanofibras/química , Polímeros/química , Polímeros/uso terapêutico , Materiais Inteligentes/farmacologia , Materiais Inteligentes/uso terapêutico , Alicerces Teciduais/químicaRESUMO
The 4D-printing technology is applied to fabricate a shape memory peripheral stent with good biocompatibility, which sustains long-term drug release. The star polymer s-PCL is prepared by ring opening polymerization of ε-caprolactone with the -OH of ß-cyclodextrin (ßCD) as initiator, and then the s-PCL is modified with acrylate endgroup which allows the polymerization under UV light to form the crosslinking network c-PCL. Attributed to the feature of the high crosslinked structure and chemical nature of polycaprolactone (PCL) and ßCD, the composite exhibits appropriate tensile strength and sufficient elasticity and bursting pressure, and it is comparable with great saphenous vein in human body. The radial support of the 4D-printed stent is 0.56 ± 0.11 N and is equivalent to that of commercial stent. The cell adhesion and proliferation results show a good biocompatibility of the stent with human umbilical vein endothelial cells. Due to the presence of ßCD, the wettability and biocompatibility of the materials are improved, and the sustained paclitaxel release based on the host-guest complexion shows the potential of the drug-loaded stent for long-term release. This study provides a new strategy to solve the urgent need of small-diameter scaffolds to treat critical limb ischemia.
Assuntos
Células Endoteliais , beta-Ciclodextrinas , Materiais Biocompatíveis , Humanos , Poliésteres , Impressão Tridimensional , StentsRESUMO
A semi-crystalline, shape memory polymer (SMP) is fabricated by free radical cross-linking, polymerization, and grafting in a blend of n-octadecyl acrylate and polybutadiene (PB). Poly(n-octadecyl acrylate) (PODA) is a side-chain crystalline polymer, which serves as the structure-fixing network counterbalancing the elastically deformed, cross-linked polymer network. At a constant 50/50 ratio of monomer and polymer the amount of free radical initiator, dicumyl peroxide (DCP) is varied from 1% to 5% w/w PB. From swelling measurements and calculation of the cross-link density it is determined that DCP produces greater than one cross-link per DCP molecule. It is found that lower cross-linking efficiency is favorable for higher shape fixity. This lower efficiency is found to produce a higher degree of crystallinity of the PODA in the 2-5% DCP samples, which is determined to be the main driver of higher shape fixity of the polymer. A SMP with >90% fixity and 100% recovery at uniaxial strains from 34-79% is achieved. This material should be useful for mold processing of shape memory articles. This approach provides a method to decouple the elastomeric and thermoplastic portions of a SMP to convert commodity elastomers into SMPs and tailor the shape memory response.
Assuntos
Materiais Inteligentes , Acrilatos , Butadienos , Elastômeros , Radicais Livres , PolimerizaçãoRESUMO
Smart materials have intrinsic properties that change in a controlled fashion in response to external stimuli. Currently, the only smart materials with a significant clinical impact in cardiovascular implant design are shape memory alloys, particularly Nitinol. Recent prodigious progress in material science has resulted in the development of sophisticated shape memory polymers. In this article, we have reviewed the literature and outline the characteristics, advantages, and disadvantages of shape memory alloys and shape memory polymers which are relevant to clinical cardiovascular applications, and describe the potential of these smart materials for applications in coronary stents and transcatheter valves.
Assuntos
Doenças Cardiovasculares/cirurgia , Intervenção Coronária Percutânea/instrumentação , Polímeros/uso terapêutico , Materiais Inteligentes/uso terapêutico , Substituição da Valva Aórtica Transcateter/instrumentação , Desenho de Equipamento , Humanos , Teste de Materiais , Intervenção Coronária Percutânea/tendências , Stents/tendências , Substituição da Valva Aórtica Transcateter/tendênciasRESUMO
Transparent and stretchable electrodes (TSEs) are a key technology for the next generation of stretchable electronics and optoelectronics. Metallic nanofibers are widely used because of their good optoelectrical properties, but they demonstrate low stretchability. To enhance stretchability, fabricating in-plane buckled nanofibers with the aid of a prestrained substrate has become crucial in this research field. Here, a composite comprising shape memory polymer-TSE (SMP-TSE) using crosslinked polycyclooctene as a substrate, which shows wrinkle-free deformation and switchable optical transparency, is fabricated. Because of its considerable elongation without residual strain and the shape memory behavior of polycyclooctene, in-plane buckled nanofibers are formed effectively. For fabrication of SMP-TSE, continuous and thin metallic nanofiber that can maintain its structural integrity is required; therefore, electrospinning and an ultraviolet reduction process to create a free-standing, conductive, nanofiber network are used. Because of its in-plane buckled nanofibers, the electrode maintained its resistance during 3000 cycles of a bending test and 900 cycles of a tensile test. Furthermore, SMP-TSE is able to electrically control its temperature, optical transparency, elastic modulus, and shape memory behavior. Finally, the use of SMP-TSE in a smart display that can control its optical and mechanical properties is demonstrated.
Assuntos
Nanofibras , Materiais Inteligentes , Condutividade Elétrica , Eletrodos , PrataRESUMO
The goal of this work was to develop a shape memory polymer (SMP) foam with visibility under both X-ray and magnetic resonance imaging (MRI) modalities. A porous polymeric material with these properties is desirable in medical device development for applications requiring thermoresponsive tissue scaffolds with clinical imaging capabilities. Dual modality visibility was achieved by chemically incorporating monomers with X-ray visible iodine-motifs and MRI visible monomers with gadolinium content. Physical and thermomechanical characterization showed the effect of increased gadopentetic acid (GPA) on shape memory behavior. Multiple compositions showed brightening effects in pilot, T1-weighted MR imaging. There was a correlation between the polymeric density and X-ray visibility on expanded and compressed SMP foams. Additionally, extractions and indirect cytocompatibility studies were performed to address toxicity concerns of gadolinium-based contrast agents (GBCAs). This material platform has the potential to be used in a variety of medical devices.