Craniosynostosis in molecularly diagnosed Kabuki syndrome: Prevalence and clinical implications.

Kabuki syndrome (KS) is characterized by growth impairment, psychomotor delay, congenital heart disease, and distinctive facial features. KMT2D and KDM6A have been identified as the causative genes of KS. Craniosynostosis (CS) has been reported in individuals with KS; however, its prevalence and clinical implications remain unclear. In this retrospective study, we investigated the occurrence of CS in individuals with genetically diagnosed KS and examined its clinical significance. Among 42 individuals with genetically diagnosed KS, 21 (50%) exhibited CS, with 10 individuals requiring cranioplasty. No significant differences were observed based on sex, causative gene, and molecular consequence among individuals with KS who exhibited CS. Both individuals who underwent evaluation with three-dimensional computed tomography (3DCT) and those who required surgery tended to exhibit cranial dysmorphology. Notably, in several individuals, CS was diagnosed before KS, suggesting that CS could be one of the clinical features by which clinicians can diagnose KS. This study highlights that CS is one of the noteworthy complications in KS, emphasizing the importance of monitoring cranial deformities in the health management of individuals with KS. The findings suggest that in individuals where CS is a concern, conducting 3DCT evaluations for CS and digital impressions are crucial.

Reducing the incidence of persistent headache attributed to retrosigmoid craniotomy: the role of 3D computed tomography venography image-guided technique and bone defects minimization.

OBJECTIVE: The objective of this paper was to assess the risk factors for persistent headache attributed to retrosigmoid craniotomy. Furthermore, we evaluated the role of the 3D computed tomography venography(CTV) image-guided technique in reducing the incidence of persistent headache. METHOD: The study encompassed patients with trigeminal neuralgia who underwent microvascular decompression. Patients were categorized into two groups based on the use of 3D CTV in surgical planning. Factors related to craniotomy and postoperative complications were analyzed between the two groups. Binary logistic regression analysis was conducted to identify risk factors for persistent headache attributed to craniotomy. RESULT: The inclusion criteria yielded 48 patients who underwent craniotomy with 3D CTV image guidance (the image-guided group) and 69 patients who did not use this technique (the control group). The image-guided group experienced significantly shorter craniotomy durations (27.9 ± 4.7 vs. 37.5 ± 8.0 min; p < 0.001), smaller craniotomy areas (472.7 ± 56.7 vs. 617.4 ± 89.7 mm2; p < 0.001), and reduced bone defects (141.8 ± 33.5 vs. 233.2 ± 71.1 mm2; p < 0.001). Bone defect (OR: 1.012; 95% CI: 1.005-1.018; p < 0.001) was found to be significantly associated with persistent headache in the multivariate analysis. CONCLUSIONS: Bone defects constitute an independent risk factor for persistent headache attributed to retrosigmoid craniotomy. The 3D CTV image-guided technique effectively reduces the size of bone defects, thereby leading to a reduced incidence of persistent headache postoperatively.

Closed reduction and internal fixation for tillaux fractures, based on pre-operative three-dimensional computed tomography.

OBJECTIVE: This study aimed to propose treatment protocol and identify patterns of tillaux fractures using three-dimensional (3D) computed tomography (CT) analysis and to describe an effective reduction technique. METHODS: Forty-two juvenile patients with tillaux fractures were evaluated with 3D-CT scan for fracture displacement pattern and received surgical treatment. Tillaux fragment was reduced by pushing the superomedial quadrant part of the fragment slightly downward towards the ankle joint from anterolateral to posteromedial through 5-mm skin incisions with mosquito forceps. A 4.0 cannulated screw was subsequently inserted from the anterolateral to the posteromedial side parallel to the ankle joint. We analysed the distance and direction of fracture displacement with 3D-CT before the surgery. Pre-operative and post-operative plain radiographs were evaluated. RESULTS: Pre-operative 3D-CT analysis revealed a common fracture pattern, varus tilt, and external rotation of fragment. We achieved satisfactory reduction with residual fracture gaps less than 2 mm in 42 cases. Two cases had a 13-mm anterior gap that was reduced by mini-open reduction because of periosteal impingement. No significant clinical complications were found. CONCLUSION: The closed reduction technique developed based on the fracture pattern identified by 3D-CT anatomical analysis is safe and effective in treating tillaux fractures.

A Study on the Effect of Precise Rehabilitation Therapy Guided by Three-dimensional-computed Tomography Reconstruction Technology in Hip Fracture Surgery Patients.

OBJECTIVE: To evaluate the effectiveness of precise rehabilitation therapy guided by three-dimensional computed tomography (3D-CT) reconstruction technology in hip fracture patients through a retrospective cohort study. METHOD: Data were retrospectively collected from 60 patients aged over 60 who had undergone hip fracture surgery. They were divided into two groups based on their chosen rehabilitation method: a control group and a test group. The study collected demographic data, fracture characteristics, and quality of life indicators to assess the impact of rehabilitation on economic indicators and daily living activities (ADL). Additionally, it included assessments of muscle strength, joint mobility, hip function, postoperative complications, and records of hospitalization information and costs. Cognitive function was also assessed postoperatively. RESULTS: There were no significant differences in demographic data, fracture characteristics, ADL, or Fugl-Meyer assessment (FMA) between the two groups. However, the test group exhibited significantly higher post-surgery muscle strength recovery and hip mobility compared to the control group (P<0.05). Additionally, the test group had significantly fewer hospitalization days and lower hospitalization costs than the control group (P<0.05). CONCLUSION: Precise rehabilitation therapy guided by 3D-CT reconstruction technology for hip fracture surgery patients can enhance early muscle strength recovery, improve mobility of the affected limb, reduce hospitalization duration and costs, and enhance overall patient recovery outcomes.

Benefits of adrenal venous sampling with preoperative four-dimensional CT imaging.

BACKGROUND: The effects of adrenal venous sampling (AVS) may be limited by the anatomical variants of adrenal veins. PURPOSE: To investigate the benefits of AVS for patients who underwent four-dimensional computed tomography (4D CT) before AVS. MATERIAL AND METHODS: We reviewed the images of contrast-enhanced four phase three-dimensional (3D) and 4D CT in patients who received AVS between February 2010 and February 2021. A total of 112 patients (59 women; mean age = 55.3 ± 11.8 years) were enrolled. Of the entire population, 49.1% (55/112) underwent 4D CT, whereas 50.9% (57/112) underwent 3D CT. The anatomical features of adrenal veins and procedural data were obtained. Simple linear regression analyses were performed to determine the relationship between imaging protocols and AVS. RESULTS: On comparison of the two groups, the 4D cohort had a higher success rate (98.2% vs. 78.9%; P = 0.001), shorter procedure and fluoroscopy time (73.6 ± 37.3 min vs. 110.5 ± 47.9 min; P < 0.001 and 28.7 ± 31.2 min vs. 97.4 ± 251.7 min; P = 0.047, respectively), lower radiation exposure (243.5 ± 315.5 mGycm2 vs. 613.4 ± 674.6 mGycm2; P < 0.001) and less contrast volume (46.2 ± 42.7 ml vs. 68.3 ± 47.4 ml vs; P = 0.014). In simple linear regression analysis, positive and negative identification of right adrenal vein before AVS significantly influenced the success rate (unstandardized coefficients [UC] = 0.304, standardized coefficients [SC] = 0.304; P = 0.001) and operation duration (UC = -46.124, SC = -0.318; P = 0.001). CONCLUSION: Pre-procedural 4D CT may facilitate successful AVS. Compared with four-phase 3D CT, this protocol is better to shorten the operation and fluoroscopy time, and to reduce the radiation dose and contrast consumption.

Performance of atrazine adsorption behavior and microbial community structure in Mollisol aggregate fraction.

Owing to complex pore systems and chemical substances, soil aggregates provide a spatially heterogeneous microenvironment for adsorption capacity and microbial survival. As the widely used pesticide in farmlands, atrazine environmental behavior is not well known at the aggregate scale. In this study, Mollisol soil samples were sieved into four aggregate-size classes: large macroaggregates (>2 mm, LMa), small macroaggregates (1-2 mm, SMa), microaggregates (0.25-1 mm, Mia) and primary particles (<0.25 mm, P). The pore characteristics of each aggregate fraction was visualized by non-invasive X-ray three-dimensional microscopic computed tomography (3D-CT) combined with pore network extraction. The adsorption kinetics of atrazine in each aggregate-size fraction can be described well by a pseudo-second-order kinetic model. The adsorption isothermal process of atrazine can be better fitted by the Langmuir isotherm model than Freundlich isotherm model. There was an obvious linear correlation between the maximum atrazine adsorption capacity and aggregate SOC content as well as TN. In addition, the abundance of bacteria, actinomycetes and anaerobic bacteria in P was totally higher than those in SMa and Mia. Although pH is strongly linked to the bacterial community in the aggregate fraction, aggregate particle size explained 18 % for shaping the microbial community. Therefore, chemical properties and pore characteristics of each soil aggregate fraction both contributed to performance of atrazine adsorption behavior and microbial community.

ACL stump and ACL femoral landmarks are equally reliable in ACL reconstruction for assisting ACL femoral tunnel positioning.

PURPOSE: This study aimed to comparatively evaluate the accuracy of femoral tunnel positioning after anatomic single-bundle anterior cruciate ligament (ACL) reconstruction performed with the remnant preservation (RP) technique versus the non-remnant preservation (NRP) technique. METHODS: A retrospective review of 145 patients who underwent ACL reconstruction from May 2020 to May 2022 were performed in this single-surgeon study. A total of 120 patients met the inclusion criteria and were allocated into two groups according to the surgical technique (i.e. RP group and NRP group). The relative location of the femoral tunnel in the lateral condyle was evaluated as a percentage using a standardized grid system on the three-dimensional computed tomography (3D-CT) image. The accuracy and precision of the RP group were assessed based on published anatomical data in direct comparison with the NRP group. RESULTS: According to the surgical procedure, 57 of the 120 patients included were allocated into the RP group, and 63 into the NRP group. Significant differences were observed between the two groups in terms of tunnel position (posterior-to-distal (PD): 28.4 ± 5.4% (RP) vs. 31.8 ± 5.3% (NRP); P = 0.01), (anterior-to-posterior (AP): 32.6 ± 7.7% (RP) vs. 38.8 ± 7.7% (NRP); P = 0.00), while no significant differences were found in terms of the accuracy (8.6% (RP) vs. 8.9% (NRP); n.s) and precision (4.4% (RP) vs. 5.6% (NRP); n.s) of femoral tunnel positioning between the two groups. CONCLUSIONS: From this single-surgeon study, it was concluded that there were no differences in the creation of ACL femoral tunnel between the RP technique and the non-remnant preserving technique. Meanwhile, the RP technique would not sacrifice the ideal position of the femoral tunnel and is able to retain the possible benefits of the ACL stump. LEVEL OF EVIDENCE: Level III.

Bone formation of the coracoid bone graft after the Bristow procedure assessed using three-dimensional computed tomography.

BACKGROUND: The Bristow procedure has been shown to be a reliable method to prevent recurrent anterior shoulder instability by compensating for glenoid bone loss and producing the sling effect. The degree of postoperative morphological change in the coracoid bone graft is speculated to influence glenohumeral joint stability; however, the details of these changes after the Bristow procedure remain unknown. This study was performed to quantify the postoperative change in the coracoid bone graft volume as assessed by three-dimensional computed tomography (3D-CT). METHODS: The Bristow procedure was performed on 17 shoulders in 17 patients from August 2018 to January 2020. All patients were men, and their mean age at surgery was 17.9 years. The mean follow-up duration was 21.4 months. Within the first week after the operation (Time 0) and at the final follow-up, 3D-CT was used to determine the total coracoid bone graft volume. The clinical outcomes were evaluated using the Japanese Orthopaedic Association (JOA) shoulder score, the University of California Los Angeles (UCLA) shoulder score, and the Western Ontario Shoulder Instability Index (WOSI). RESULTS: The mean volume of the total coracoid bone graft was 1.26 ± 0.29 cm3 at Time 0 and 1.90 ± 0.36 cm3 at the final follow-up (p < 0.0001). The mean JOA score, UCLA score, and WOSI were significantly better at the final follow-up than preoperatively (p < 0.001). No postoperative infection, neurovascular injury, or recurrent instability of the glenohumeral joint occurred. CONCLUSIONS: In the Bristow procedure, the volume of the total coracoid bone graft as shown by 3D-CT was significantly greater at the final follow-up than at Time 0, and bone formation of the coracoid bone graft was found after the Bristow procedure.

Robot-assisted thoracoscopic right upper lobectomy with displaced B3 and absence of minor fissure: a case report.

INTRODUCTION: B3 downward-shifting is a rare bronchial anomaly characterized by abnormal pulmonary arteries associated with downward displacement of B3 and complete fusion between the right upper and middle lobes. CASE PRESENTATION: We report a case of robot-assisted thoracoscopic right upper lobectomy in a patient with lung cancer with B3 downward-shifting. An 81-year-old male was diagnosed with non-small cell lung cancer in S3 of the right upper lung. Preoperative three-dimensional computed tomography angiography revealed a B3 bronchus derived from the middle lobe bronchus and an anterior segmental pulmonary artery variation. Robot-assisted thoracoscopic surgery right upper lobectomy with ND2a-1 was performed via four-port incisions and an assist incision. No interlobar fissure was observed between the right upper and middle lobes. After dissecting B1+2, the displaced B3 root was dissected. The displaced A3a was difficult to dissect because of an extremely severe complete fissure. Therefore, we dissected the bronchus preceding from the cranial side. To confirm a minor fissure, indocyanine green was administered intravenously, and the interlobar boundary was identified as the line separating the dark and green lung parenchyma. The boundary was divided using mechanical staples. No surgical complications occurred. CONCLUSIONS: Using three-dimensional reconstruction imaging and systemic indocyanine green administration, we successfully performed a right upper lobectomy through robot-assisted thoracic surgery.

Standardised 3D-CT lung volumes for patients with idiopathic pulmonary fibrosis.

BACKGROUND: The assessment of lung physiology via pulmonary function tests (PFTs) is essential for patients with idiopathic pulmonary fibrosis (IPF). However, PFTs require active participation, which can be challenging for patients with severe respiratory failure, such as during moments of acute exacerbation (AE) of IPF. Recent advances have enabled the re-construction of 3-dimensional computed-tomography (3D-CT) images. This study established a standardisation method and quantitative analysis of lung volume (LV) based on anthropometry using 3D-CT images. METHODS: This is a retrospective multi-center cohort study. The standardised 3D-CT LV in patients with IPF at diagnosis (n = 140) and during AE (cohort1; n = 61 and cohort2; n = 50) and those of controls (n = 53) were assessed. RESULTS: The standardised 3D-CT LVs at IPF diagnosis were less than those of control patients, especially in the lower lung lobes. The standardised 3D-CT LVs were correlated with forced vital capacity (FVC) and validated using the modified Gender-Age-Physiology (GAP) index. The standardised 3D-CT LVs at IPF diagnosis were independently associated with prognosis. During AE, PFTs were difficult to perform, 3D-CT analyses revealed reduced lung capacity in both the upper and lower lobes compared to those obtained at diagnosis. Lower standardised 3D-CT LVs during AE were independently associated with worse outcomes in the two independent cohorts. In particular, volume loss in the upper lobe at AE had prognostic values. CONCLUSIONS: A novel image quantification method for assessing pulmonary physiology using standardised 3D-CT-derived LVs was developed. This method successfully predicts mortality in patients with IPF and AE of IPF, and may be a useful alternative when PFTs cannot be performed.

Variables measured on three-dimensional computed tomography are preferred for predicting the outcomes of shock wave lithotripsy.

PURPOSE: Shock wave lithotripsy (SWL) is used to treat upper urinary tract stones. Recently, some volume analyzers have enabled preoperative assessment using three-dimensional computed tomography (3D-CT). We evaluated the efficacy of 3D-CT variables for predicting the outcomes of SWL. METHODS: The study population included 193 patients who underwent SWL between November 2014 and August 2020. In addition to conventional two-dimensional computed tomography (2D-CT) assessments, 3D-CT assessments of targeted stones were retrospectively performed, and stone size and stone density (SD) were measured. The successful and unsuccessful treatment groups were compared and risk factors for an unsuccessful first SWL session were investigated. The predictive accuracy of variables measured on 3D-CT was evaluated by receiver operating characteristic curves and multivariate analyses. RESULTS: The success rate of the first SWL session was 73.1%. Stone volume, mean SD and highest SD on 3D-CT were significantly higher in the unsuccessful group than in the successful group. Stone volume showed a higher area under the curve (AUC) than the estimated volumetric stone burden and stone diameter, which were measured on 2D-CT (0.729, 0.683, and 0.672, respectively). The AUCs of the mean SD and highest SD on 3D-CT were higher than those on 2D-CT (0.699, 0.680, 0.617, and 0.627, respectively). Multivariate analyses identified stone volume (≥ 0.29 ml), mean SD on 3D-CT (≥ 421 HU), and absence of hydronephrosis as independent predictive factors for unsuccessful SWL. CONCLUSION: 3D-CT variables were promising predictors of the outcomes of SWL. Preoperative 3D-CT assessment is helpful for selecting favorable patients for SWL.

Outcome of thoracoscopic anatomical sublobar resection under 3-dimensional computed tomography simulation.

BACKGROUND: Previous studies have reported the feasibility and efficacy of thoracoscopic anatomical sublobar resection under three-dimensional computed tomography (3DCT) simulation; however, its long-term outcomes have not been clearly established in primary lung cancer. This study aimed to evaluate the long-term outcomes of this technique. METHODS: We retrospectively reviewed data from 112 consecutive patients with selected clinical stage IA non-small cell lung cancer (NSCLC) who underwent thoracoscopic anatomical sublobar resection from 2004 to 2014. This procedure was planned using preoperative 3DCT simulation to ensure sufficient surgical margins and enabled tailor-made surgery for each patient. Patients who had predominantly ground glass opacity lung cancers underwent anatomical sublobar resection as a curative-intent resection. Other patients who were high-risk candidates for lobectomy underwent anatomical sublobar resection as a compromised limited resection. RESULTS: Of the 112 cases, 82 had a curative-intent resection, while 30 had a compromised limited resection. Recurrence occurred in only 2 cases (1.8%), both of which were in the compromised limited group. A second primary lung cancer was observed in 5 cases (4.5%). Of the 5 patients, 4 underwent surgery for a second cancer and had no recurrence. The 5-year overall survival, lung cancer-specific overall survival, and recurrence-free survival rates were 92.5%, 100%, and 98.2%, respectively, for all cases; 97.6%, 100%, and 100%, respectively, in the curative-intent group; and 75.8%, 100% and 92.6%, respectively, in the compromised limited group. CONCLUSIONS: Thoracoscopic anatomical sublobar resection under 3DCT simulation may be an acceptable alternative treatment in selected patients with NSCLC. TRIAL AND CLINICAL REGISTRY: Clinical registration number: IRB No. 2020-98 (Dated: 2020.6.30).

Assessing component orientation of total hip arthroplasty using the low-dose bi-planar radiographs.

BACKGROUND: Three-dimensional computed tomography (3D CT) reconstruction is the reference standard for measuring component orientation. However, functional cup orientation in standing position is preferable compared with supine position. The low-dose bi-planar radiographs can be used to analyze standing cup component orientation. We aimed to assess the validity and reliability of the component orientation using the low-dose bi-planar radiographs compared with the 3D CT reconstruction, and explore the differences between the functional cup orientation in standing radiographs and supine CT scans. METHODS: A retrospective study, including 44 patients (50 hips) with total hip arthroplasty (THA), was conducted. CT scans were taken 1 week after surgery and the low-dose bi-planar radiographs were taken in the follow-up 6 weeks later. Component orientation measurement was performed using the anterior pelvic plane and the radiographic coronal plane as reference, respectively. RESULTS: The study showed no significant difference in cup anteversion (p = 0.160), cup inclination (p = 0.486), and stem anteversion (p = 0.219) measured by the low-dose bi-planar radiographs and 3D reconstruction. The differences calculated by the Bland-Altman analysis ranged from - 0.4° to 0.6° for the three measured angles. However, the mean absolute error was 4.76 ± 1.07° for functional anteversion (p = 0.035) and 4.02 ± 1.08° for functional inclination (p = 0.030) measured by the bi-planar radiographs and supine CT scans. CONCLUSIONS: The low-dose bi-planar radiographs are the same reliable and accurate as 3D CT reconstruction to assess post-THA patients' component orientation, while providing more valuable functional component orientation than supine CT scans.

Three-dimensional morphological analysis of the thoracic pedicle and related radiographic factors in adolescent idiopathic scoliosis.

BACKGROUND: This study aimed to investigate the laterality of the pedicle morphology at the apical vertebra (AV) level and identify the radiographic factors associated with the laterality ratio of the pedicle morphology at the AV level in patients with adolescent idiopathic scoliosis (AIS). METHODS: Overall, 684 pedicles in 57 AIS patients aged 10-20 years, who underwent preoperative computed tomography (CT) and had Lenke type 1 or 2 with right convex main thoracic curves (MTC), were evaluated. Pedicle diameters of the MTC were assessed. We defined and compared the region containing two vertebrae adjacent to the AV (APEX±1) and the region containing two vertebrae adjacent to the neutral vertebra. We analyzed the pedicle diameter and laterality ratio of APEX±1 and performed multiple linear regression analysis to identify the radiographic factors associated with the laterality of the pedicle diameter. RESULTS: On the concave side of APEX±1, the pedicles of 15 patients (26.3%) did not accept a 4-mm-diameter pedicle screw (PS), even with 25% cortical bone width expansion. Laterality ratio differences in the pedicle diameters of the cortical bone width in APEX±1 were large in patients with more proximal AV level (p < 0.001) and smaller apical vertebral rotation (AVR) (p = 0.029). CONCLUSIONS: Preoperative planning to accurately select and insert the PS in AIS should be based on the anatomical limitations in APEX±1, AV level, and AVR degree. In APEX±1, the correlation between AVR and the laterality ratio of the pedicle diameter may be useful for pathoetiological interpretation of the AIS deformity.

Does the thoracolumbar kyphosis secondary to ankylosing spondylitis affect the iliac trajectory of S2AI screw?

BACKGROUND: The study aimed to evaluate the influence of thoracolumbar kyphosis secondary to ankylosing spondylitis (AS) on parameters of S2AI trajectory and to compare the ideal S2AI trajectory with those of the non-deformity patients with AS, sagittal deformity patients without AS, and the normal population reported in literatures. METHODS: Sagittal parameters including global kyphosis (GK), pelvic tilt (PT) and sacral slope (SS) were measured. Besides, according to the simulated ideal S2AI trajectory on the CT images, trajectory parameters were measured including Sag angle, Tsv angle, Max-length, Sacral distance and Iliac width. Starting-point parameters were also measured including PSIS distance, Skin distance, Iliac wing and S2 midline. RESULTS: Ninety-four AS-related thoracolumbar kyphosis patients were included. After adjusting the age and gender, twenty non-deformity patients with AS and 20 sagittal deformity patients without AS were selected to compare with patients with AS-related thoracolumbar kyphosis, respectively. Sag angle in deformity patients with AS was smaller than other two groups (P < 0.001). No difference was found in Tsv angle and Sacral distance between AS patients with and without deformity. However, these two parameters were shown significant differences between deformity patients with AS and without AS. In deformity patients with AS, no significant differences were found in all parameters between genders Furthermore, there were strong correlations between PT and the bilateral Sag angle (P < 0.001). CONCLUSIONS: The thoracolumbar kyphosis secondary to AS affects the Sag angle of the ideal S2AI trajectory which was approximately 20° smaller than that in non-deformity patients with AS, sagittal deformity patients without AS, and the normal population. Additionally, the Tsv angle and the Sacral distance in AS patients with thoracolumbar kyphosis were about 10° and 10 mm larger than those in sagittal deformity patients without AS, and the normal population reported in literatures.

Pulmonary vessels and bronchus anatomy of the left upper lobe.

PURPOSES: The bronchopulmonary vascular bifurcation patterns in the upper lobe of the left lung are diverse. Therefore, it is important for general thoracic surgeons to understand the detailed anatomy of the pulmonary segments when performing thoracoscopic anatomical pulmonary resection. This study aimed to analyze the bronchovascular patterns of the left upper lobe and summarize the anatomical information associated with pulmonary anatomical pulmonary resection. METHODS: We reviewed the anatomical patterns of pulmonary vessels and the left lung bronchus of 539 patients using computed tomography imaging data including those obtained using three-dimensional computed tomography. We herein report the anatomic structure in the left upper lobe. RESULTS: Regarding the superior division bronchi, a pattern of trifurcation into B1+2, B3, lingular division bronchus was observed in nine patients (1.7%). A pattern of proximal bifurcation of B4 was found in eight patients (1.5%). Regarding the lingular veins (LV), patterns of LV drainage into the left lower pulmonary vein were observed in 22 patients (4.1%). Regarding the pulmonary artery, mediastinal lingular arteries (MLA) were found in 161 patients (29.9%). CONCLUSION: The bifurcation patterns of the bronchovascular region in the upper lobe of the left lung were clarified. These results should be carefully noted when performing anatomical pulmonary resection.

Intraoral and extraoral approach for surgical treatment of Eagle's syndrome: a retrospective study.

BACKGROUND AND PURPOSE: Eagle's syndrome is not uncommon in clinical work. Because of its atypical symptoms, it is easy to be misdiagnosed as other diseases, further leading to misdiagnosis and mistreatment. At present, there is no expert consensus or treatment guidelines for the disease. We evaluated the clinical characteristics and postoperative efficacy of 103 patients with Eagle's syndrome based on their clinical symptoms, radiological studies, and physical examination. Through the multicenter clinical study of Tongji Medical College and Dalian Medical University, we found some characteristics of Eagle's syndrome in operation and imaging. METHODS: In total, 103 patients with Eagle's syndrome (treated from January 2010 to January 2020) were retrospectively enrolled. The postoperative curative effect was analyzed by three surgical methods: styloid process resection through the external cervical approach (styloid process could not be touched through the mouth or could be touched under the jaw or when the CT scan showed that the inclination angle was not large), tonsillectomy + styloidectomy, and preservation of the tonsil for styloidectomy (the styloid process bone could be touched directly during intraoral palpation or in whom the distal part of the styloid process could not be directly touched, but the CT scan showed that the bone inclined toward the oropharynx and its distal part was relatively close to the oropharynx cavity; whether tonsillectomy was performed depended on whether the patient's tonsil was too large to affect the surgical incision). According to the Quality of Well-Being Scale (QWB), we calculated the W value of the scale before operation and 30 days, 3 months, 6 months and 12 months after operation, and compared the W value of each group. RESULTS: The average length of the styloid process was 33 mm (range 25-61 mm). The patients were followed up for 12-36 months (average 15 months). Of the 103 patients, 21 underwent styloid process resection through the external cervical approach, 49 underwent tonsillectomy and styloidectomy, and 33 underwent styloidectomy with preservation of the tonsil. The treatment cured 48 (46%) cases, was effective in 35 (34%) and was ineffective in 20 (20%). The R language 3.6.3 software was used to perform the nonparametric rank sum test, differences in characteristics between groups were analyzed using the Kruskal-Wallis test with Dunn post hoc tests ( R package FSA) for categorical variables, and there was no significant difference between the three types of operations (H = 0.491, P = 0.782). QWB showed that the quality of life after operation was improved compared with that before operation. CONCLUSIONS: Operation is an effective method for treating Eagle's syndrome. There were no significant differences between the effects of the intraoral and external cervical approaches. Imaging examination-especially CT scanning and 3D reconstruction of the styloid process-is very helpful for diagnosis, but not an absolute criterion for the selection of surgery protocol.

Three-Dimensional Computed Tomography Bronchography and Angiography-Guided Thoracoscopic Segmentectomy for Pulmonary Nodules.

BACKGROUND: Three-dimensional computed tomography bronchography and angiography (3D-CTBA) provides detailed imaging information for pulmonary segmentectomy. This study was performed to verify the feasibility of 3D-CTBA-guided thoracoscopic segmentectomy for the treatment of pulmonary nodules. METHODS: A retrospective analysis was performed on all patients who underwent 3D-CTBA-guided uniport thoracoscopic segmentectomies or subsegmentectomies for pulmonary nodules in the period from May 2019 to May 2020. All of the information related to perioperative management and surgical operations was retrieved from the medical records and operating notes for detailed analysis. RESULTS: A total of 104 eligible operations involving the resection of 110 nodules with diameters in the range of 5-20 mm were included. Under 3D-CTBA guidance, the pulmonary nodules were located with an accuracy of 100% (110/110) and the median resection margin was 24.3 mm (17-33 mm). Additionally, the segmental (subsegmental) bronchi, arteries, and veins were identified with accuracy rates of 100% (104/104), 96.2% (100/104), and 94.2% (98/104), respectively. The postoperative complications consisted of 3 cases of pulmonary infection (2.9%), 6 cases of arrhythmia (5.8%), 2 cases of hemoptysis (1.9%), 4 cases of air leak (3.8%), and 2 cases of subcutaneous emphysema (1.9%). No perioperative death occurred. CONCLUSION: 3D-CTBA-guided thoracoscopic segmentectomy is an effective surgical approach for the management of pulmonary nodules.

Operative strategy for tri-malleolar ankle fractures with posteromedial plafond involvement: a review of sixty six cases.

PURPOSE: We aimed to summarize the radiographic and clinical outcomes in various conditions of tri-malleolar ankle fractures (TMFs) with posteromedial (PM) plafond involvement (TMF + PM) and determine the factors affecting their subjective clinical outcomes. METHODS: Radiographic and clinical findings of 66 patients who underwent operative treatment for TMF + PM were retrospectively reviewed. The patients were classified into three groups according to the PM fracture line location. Type I fractures were defined when the PM fracture line extended medially beyond the PM corner of the distal tibia while type II fractures were those in which the PM fracture line was located laterally to the PM corner. Type III fractures were defined as medial malleolar avulsion fractures when the PM fracture integrated into the medial malleolus. Clinical outcomes were evaluated using a subjective rating scale (excellent, good, fair, poor, and bad). Satisfactory results were defined as excellent, good, and fair. Factors affecting satisfactory clinical outcomes were assessed using a binary logistic regression analysis. Independent variables included demographic, fracture-related, and operation-related factors and radiographic measurements at the final follow-up. RESULTS: Satisfactory clinical outcomes were observed in 74.2% of the total patients; of these patients, 75.7% (28/37), 76.5% (13/17), and 66.7% (8/12) had type I, type II, and type III fractures, respectively. The binary logistic regression analysis revealed that age at the time of operation, number of incarcerated fragments (IFs), type of IFs, and postoperative articular step-offs (mm) were related to subjective clinical outcomes (all P < 0.05). A positive value for post-operative articular step-offs represented distal migration of the posterior malleolar fragments. The odds ratios for older age, increased numbers of IFs, rotated IFs, and positive articular step-offs were 0.936, 0.116, 0.020, and 0.295, respectively. CONCLUSION: Because TMF + PM is highly unstable, a delicate approach is needed according to each patient's fracture condition. Although it is best to reduce the fractured articular surface, a negative step-off, rather than a positive step-off, would be more likely recommended if accurate reduction is impossible. This could be applied to manage IFs, especially when the IFs are rotated. Dimpling of the articular surface induced by the removal of a small IF was not related to unsatisfactory clinical outcomes.

Bilateral vertebral artery fenestrations in the craniocervical junction region: the clinical role of 3D computed tomography angiography.

Fenestration of the vertebral artery (FVA) is a rare occurrence that comprises only 2% of fenestrations formed in the intracranial arteries. Herein, we report a unique case of bilateral FVA in the craniocervical junction (CCJ) region using conventional magnetic resonance angiography (MRA) and three-dimensional computed tomography angiography (3D-CTA). Compared to MRA, 3D-CTA was more sensitive in delineating the FVAs located in the region. Furthermore, it effectively depicted the relationships between the VAs and surrounding bony structures. The clinical implications of FVAs can be better understood in relation to the surrounding bony structures. 3D-CTA is mandatory when performing endovascular and open surgical interventions in and around the VA segments in the CCJ region.