High Strength and Toughness Polymeric Triboelectric Materials Enabled by Dense Crystal-Domain Cross-Linking.

Lightweight, easily processed, and durable polymeric materials play a crucial role in wearable sensor devices. However, achieving simultaneously high strength and toughness remains a challenge. This study addresses this by utilizing an ion-specific effect to control crystalline domains, enabling the fabrication of a polymeric triboelectric material with tunable mechanical properties. The dense crystal-domain cross-linking enhances energy dissipation, resulting in a material boasting both high tensile strength (58.0 MPa) and toughness (198.8 MJ m-3), alongside a remarkable 416.7% fracture elongation and 545.0 MPa modulus. Leveraging these properties, the material is successfully integrated into wearable self-powered devices, enabling real-time feedback on human joint movement. This work presents a valuable strategy for overcoming the strength-toughness trade-off in polymeric materials, paving the way for their enhanced applicability and broader use in diverse sensing applications.

Graded Nanotexturing Architectural Wearable Triboelectric Sensor for Programmable Haptic Exploration.

Emulating biological perception mechanisms to construct intelligent sensing devices and systems represents a paradigm for promoting human-computer interaction in the Internet of Everything era. Nonetheless, developing highly sensitive, real-time sensing and rapidly integrated intelligent interaction units remains a challenging and time-consuming endeavor. This study employs a low-temperature glow discharge technique to rapidly fabricate graded nanotexturing architectural triboelectric nanopaper, upon which wearable triboelectric sensors for real-time tactile detection are designed. The structure enhances the contact area under an external force. Additionally, the Z-stacking structure design enables the sensor to achieve a remarkable sensitivity of 10.3 kPa-1 and a rapid response time of 52 ms. Furthermore, a tactile sensor array was designed to demonstrate the triboelectric sensor's ability to recognize characteristic pressures. With programmable machine learning techniques, the object recognition rate reached 97%. This study supports material structural design across disciplines, laying a solid foundation for the rapid fabrication and integration of transient wearable electronics.

Phase-Directed Assembly of Triboelectric Nanopaper for Self-Powered Noncontact Sensing.

Noncontact sensing technology serves as a pivotal medium for seamless data acquisition and intelligent perception in the era of the Internet of Things (IoT), bringing innovative interactive experiences to wearable human-machine interaction perception networks. However, the pervasive limitations of current noncontact sensing devices posed by harsh environmental conditions hinder the precision and stability of signals. In this study, the triboelectric nanopaper prepared by a phase-directed assembly strategy is presented, which possesses low charge transfer mobility (1618 cm2 V-1 s-1) and exceptional high-temperature stability. Wearable self-powered noncontact sensors constructed from triboelectric nanopaper operate stably under high temperatures (200 °C). Furthermore, a temperature warning system for workers in hazardous environments is demonstrated, capable of nonintrusively identifying harmful thermal stimuli and detecting motion status. This research not only establishes a technological foundation for accurate and stable noncontact sensing under high temperatures but also promotes the sustainable intelligent development of wearable IoT devices under extreme environments.

60Co-γ Irradiation-Induced Shift and Polarity Reversal in the Triboelectric Series of Poly(ether sulfone)s.

The sensitivity of triboelectric nanogenerators (TENGs) to the surface charge density highlights the significance of triboelectric materials and their modifications. Efforts have been directed toward developing effective strategies for increasing the surface charge density, expanding the potential applications of TENGs. This study proposes the use of irradiation technology for grafting to modify the electron-donating capability of poly(ether sulfone) (PES), thereby affording a dual benefit of enhancing the surface charge density and inducing a shift in the position of PES from negative to positive within the triboelectric series. The TENG based on grafted PES has resulted in a significant 3-fold increase in surface charge density compared to that of pristine PES, reaching 263 µC m-2. The surface charge density can be further increased to 502 µC m-2 through charge pumping. Notably, irradiation technology presents advantages over chemical grafting methods, particularly in terms of sustainability and environmental friendliness. This innovative approach shows great potential in advancing the domain of TENGs.

Lightweight and Strong Cellulosic Triboelectric Materials Enabled by Cell Wall Nanoengineering.

As intelligent technology surges forward, wearable electronics have emerged as versatile tools for monitoring health and sensing our surroundings. Among these advancements, porous triboelectric materials have garnered significant attention for their lightness. However, these materials face the challenge of improving structural stability to further enhance the sensing accuracy of triboelectric sensors. In this study, a lightweight and strong porous cellulosic triboelectric material is designed by cell wall nanoengineering. By tailoring of the cell wall structure, the material shows a high mechanical strength of 51.8 MPa. The self-powered sensor constructed by this material has a high sensitivity of 33.61 kPa-1, a fast response time of 36 ms, and excellent pressure detection durability. Notably, the sensor still enables a high sensing performance after the porous cellulosic triboelectric material exposure to 200 °C and achieves real-time feedback of human motion, thereby demonstrating great potential in the field of wearable electronic devices.

A High-Voltage-Specialized Direct-Current Triboelectric Nanogenerator for Air Purification.

Human health and the environment face significant challenges of air pollution, which is predominantly caused by PM2.5 or PM10 particles. Existing control methods often require elevated energy consumption or bulky high-voltage electrical equipment. To overcome these limitations, a self-powered, convenient, and compact direct current high-voltage triboelectric nanogenerator based on triboelectrification and electrostatic breakdown effects is proposed. By optimizing the structure-design of the direct current triboelectric nanogenerator and corresponding output voltage, it can easily achieve an output voltage of over 3 kV with a high charge density of 320 µC m-2. A power management circuit is designed to overcome the influence of third domain self-breakdown, optimize 92.5% amplitude of voltage shake, and raise 5% charge utilization ratio. With a device size as tiny as 2.25 cm3, it can continuously drive carbon nanowires to generate negative ions that settle dust within 300 s. This compact, simple, efficient, and safe high-voltage direct current triboelectric nanogenerator represents a promising sustainable solution. It offers efficient dust mitigation, fostering cleaner environments, and enhancing overall health.

Advances of Strategies to Increase the Surface Charge Density of Triboelectric Nanogenerators: A Review.

Triboelectric nanogenerators (TENGs) have manifested a remarkable potential for harvesting environmental energy and have the prospects to be utilized for various uses, for instance, self-powered sensing devices, flexible wearables, and marine corrosion protection. However, the potential for further development of TENGs is restricted on account of their low output power that in turn is determined by their surface charge density. The current review majorly focuses on the selection and optimization of triboelectric materials. Subsequently, various methods capable of enhancing the surface charge density of TENGs, including environmental regulation, charge excitation, charge pumping, electrostatic breakdown, charge trapping, and liquid-solid structure are comprehensively reviewed. Lastly, the review is concluded by highlighting the existing challenges in enhancing the surface charge density of TENGs and exploring potential opportunities for future research endeavors in this area.

Dynamic Thermostable Cellulosic Triboelectric Materials from Multilevel-Non-Covalent Interactions.

Triboelectric materials present great potential for harvesting huge amounts of dispersed energy, and converting them directly into useful electricity, a process that generates power more sustainably. Triboelectric nanogenerators (TENGs) have emerged as a technology to power electronics and sensors, and it is expected to solve the problem of energy harvesting and self-powered sensing from extreme environments. In this paper, a high-temperature-resistant triboelectric material is designed based on multilevel non-covalent bonding interactions, which achieves an ultra-high surface charge density of 192 µC m-2 at high temperatures. TENGs based on the triboelectric material exhibit more than an order of magnitude higher power output (2750 mW m-2 at 200 °C) than the existing devices at high temperatures. These remarkable properties are achieved based on enthalpy-driven molecular assembly in highly unbonded states. Thus, the material maintains bond strength and ultra-high surface charge density in entropy-dominated high-temperature environments. This molecular design concept points out a promising direction for the preparation of polymers with excellent triboelectric properties.

Biomimetic Transparent Layered Tough Aerogels for Thermal Superinsulation and Triboelectric Nanogenerator.

Transparent aerogels are ideal candidates for thermally insulating windows, solar thermal receivers, electronics, etc. However, they are usually prepared via energy-consuming supercritical drying and show brittleness and low tensile strength, significantly restricting their practical applications. It remains a great challenge to prepare transparent aerogels with high tensile strength and toughness. Herein, biomimetic transparent tough cellulose nanofiber-based nanocomposite aerogels with a layered nanofibrous structure are achieved by vacuum-assisted self-assembly combined with ambient pressure drying. The nacre-like layered homogeneous nanoporous structures can reduce light scattering and effectively transfer stress and prevent stress concentration under external forces. The aerogels exhibit an attractive combination of excellent transparency and hydrophobicity, high compressive and tensile strengths, high toughness, excellent machinability, thermal superinsulation, and wide working temperature range (-196 to 230 °C). It is demonstrated that they can be used for superinsulating windows of buildings and high-efficient thermal management for electronics and human bodies. In addition, a prototype of transparent flexible aerogel-based triboelectric nanogenerator is developed. This work provides a promising pathway toward transparent tough porous materials for energy saving/harvesting, thermal management, electronics, sensors, etc.

Boosting the Electrical Performance of PLA-Based Triboelectric Nanogenerators for Sustainable Power Sources and Self-Powered Sensing.

Triboelectric nanogenerators (TENGs) have emerged as a promising technology for harvesting mechanical energy from the ambient environment. However, developing tribopositive materials with strong piezoelectric effects and high electron-donating ability still remains a challenge. Herein, poly(ethylene glycol) monomethyl ether (mPEG) to soft poly(lactic acid) (PLA) is adopted, then PLA/mPEG nanofibers are fabricated under electrospinning and used as the tribopositive material for fabricating robust power density TENGs. The crystallinity and dynamic mechanical properties of PLA/mPEG nanofibers are investigated. The results revealed that the incorporation of mPEG provided an effective approach to elevate the electron-donating ability and charge transfer efficiency in PLA. The PLA/mPEG-based TENGs achieved a high open-circuit voltage of 342.8 V, a short-circuit current of 38.5 µA, and a maximum power density of 116.21 W m-2 over a 2 cm2 contact area at an external load of 106 Ω, respectively. Strikingly, excellent stability and durability are demonstrated after continuous cycles up to 104 cycles. Noteworthy, the TENGs are explored for self-powered sensing applications, with seven TENG units integrated to act as self-powered sensors playing music through buzzers when pressed by fingers. Eventually, this work provides new insights into tuning the structures and properties of electrospun polymers to reinforce the TENG output and self-powered systems.

Reversibly Compressible Silanated Cellulose Nanofibril Aerogel for Triboelectric Taekwondo Scoring Sensors.

The integration of bio-based materials into triboelectric nanogenerators (TENGs) for energy harvesting from human body motions has sparked considerable research attention. Here, a silanated cellulose nanofibril (SCNF) aerogel is reported for structurally reliable TENGs and reversely compressible Taekwondo scoring sensors under repeated impacts. The preparation of the aerogel involves silanizing cellulose nanofibers (CNFs) with vinyltrimethoxysilane (VTMS), following by freeze-drying and post-heating treatment. The SCNF aerogel with crosslinked physico-chemical bonding and highly porous network is found to exhibit superior mechanical strength and reversible compressibility as well as enhanced water repellency and electron-donating ability. The TENG having a tribo-positive SCNF layer exhibits exceptional triboelectric performances, generating a voltage of 270 V, current of 11 µA, and power density of 401.1 mW m-2 under an applied force of 8 N at a frequency of 5 Hz. With its inherent merits in material composition, structural configuration, and device sensitivity, the SCNF TENG demonstrates the capability to seamlessly integrate into a Taekwondo protection gear, serving as an efficient self-powered sensor for monitoring hitting scores. This study highlights the significant potential of a facilely fabricated SCNF aerogel for the development of high-performance, bio-friendly, and cost-effective Bio-TENGs, enabling their application as self-powered wearable devices and sports engineering sensors.

Scott-Russel Linkage-Based Triboelectric Self-Powered Sensor for Contact Material-Independent Force Sensing and Tactile Recognition.

The rapid growth of Internet of Things (IoT) in recent years has increased demand for various sensors to collect a wide range of data. Among various sensors, the demand for force sensors that can recognize physical phenomena in 3D space has notably increased. Recent research has focused on developing energy harvesting methods for sensors to address their maintenance problems. Triboelectric nanogenerator (TENG) based force sensors are a promising solution for converting external motion into electrical signals. However, conventional TENG-based force sensors that use the signal peak can negatively affect data accuracy. In this study, a Scott-Russell linkage-inspired TENG (SRI-TENG) is developed. The SRI-TENG has completely separate signal generation and measurement sections, and the number of peaks in the electrical output is measured to prevent disturbing output signals. In addition, the lubricant liquid enhances durability, enabling stable force signal measurements for 270 000 cycles. The SRI system demonstrates consistent peak counts and high accuracy across different contacting surfaces, indicating that it can function as a contact material-independent self-powered force sensor. Furthermore, using a deep learning method, it is demonstrated that it can function as a multimodal sensor by realizing the tactile properties of various materials.

Nanoribbon Yarn with Versatile Inorganic Materials.

Nanomaterial-based yarns have been actively developed owing to their advantageous features, namely, high surface-area-to-volume ratios, flexibility, and unusual material characteristics such as anisotropy in electrical/thermal conductivity. The superior properties of the nanomaterials can be directly imparted and scaled-up to macro-sized structures. However, most nanomaterial-based yarns have thus far, been fabricated with only organic materials such as polymers, graphene, and carbon nanotubes. This paper presents a novel fabrication method for fully inorganic nanoribbon yarn, expanding its applicability by bundling highly aligned and suspended nanoribbons made from various inorganic materials (e.g., Au, Pd, Ni, Al, Pt, WO3, SnO2, NiO, In2O3, and CuO). The process involves depositing the target inorganic material on a nanoline mold, followed by suspension through plasma etching of the nanoline mold, and twisting using a custom-built yarning machine. Nanoribbon yarn structures of various functional inorganic materials are utilized for chemical sensors (Pd-based H2 and metal oxides (MOx)-based green gas sensors) and green energy transducers (water splitting electrodes/triboelectric nanogenerators). This method is expected to provide a comprehensive fabrication strategy for versatile inorganic nanomaterials-based yarns.

Sodium Niobate Nanowires Embedded PVA-Hydrogel-Based Triboelectric Nanogenerator for Versatile Energy Harvesting and Self-Powered CO Gas Sensor.

The surging demand for sustainable energy solutions and adaptable electronic devices has led to the exploration of alternative and advanced power sources. Triboelectric Nanogenerators (TENGs) stand out as a promising technology for efficient energy harvesting, but research on fully flexible and environmental friendly TENGs still remain limited. In this study, an innovative approach is introduced utilizing an ionic-solution modified conductive hydrogel embedded with piezoelectric sodium niobate nanowires-based Triboelectric Nanogenerator (NW-TENG), offering intrinsic advantages to healthcare and wearable devices. The synthesized NW-TENG, with a 12.5 cm2 surface area, achieves peak output performance, producing ≈840 V of voltage and 2.3 µC of charge transfer, respectively. The rectified energy powers up 30 LEDs and a stopwatch; while the NW-TENG efficiently charges capacitors from 1µF to 100 µF, reaching 1 V within 4 to 65 s at 6 Hz. Integration with prototype carbon monoxide (CO) gas sensor transform the device into a self-powered gas sensory technology. This study provides a comprehensive understanding of nanowire effects on TENG performance, offering insights for designing highly flexible and environmentally friendly TENGs, and extending applications to portable self-powered gas sensors and wearable devices.

Self-Sustaining Triboelectric Nanosensors for Real-Time Urine Analysis in Smart Toilets.

Healthcare has undergone a revolutionary shift with the advent of smart technologies, and smart toilets (STs) are among the innovative inventions offering non-invasive continuous health monitoring. The present technical challenges toward this development include limited sensitivity of integrated sensors, poor stability, slow response and the requirement external energy supply alongside manual sample collection. In this article, triboelectric nanosensor array (TENSA) is introduced featuring electrodes crafted from laser-induced 3D graphene with functional polymers like polystyrene, polyimide, and polycaprolactone for real-time urine analysis while generating 50 volts output via urine droplet-based triboelectrification. Though modulating interfacial double-layer capacitance, these sensors exhibit exceptional sensitivity and selectivity in detecting a broad spectrum of urinary biomarkers, including ions, glucose, and urea with a classification precision of 95% and concentration identification accuracy of up to 0.97 (R2), supported by artificial neural networks. Upon exposure to urine samples containing elevated levels of Na+, K+, and NH4 +, a notable decrease (ranging from 32% to 68%) is observed in output voltages. Conversely, urea induces an increase up to 13%. Experimental validation confirms the stability, robustness, reliability, and reproducibility of TENSA, representing a significant advancement in healthcare technology, offering the potential for improved disease management and prevention strategies.

Nanocomposite Electret Layer Improved Long-Term Stable Solid-Liquid Contact Triboelectric Nanogenerator for Water Wave Energy Harvesting.

With the continuous rise of environmental pollution and energy crisis, the global energy revolution is risen. Development of renewable blue energy based on the emerging promising triboelectric nanogenerators (TENG) has become an important direction of future energy development. The solid-liquid contact triboelectric nanogenerator (TENG) has the advantages of flexible structure, easy manufacture, and long-term stability, which makes it easier to integrate and achieve large-scale conversion of wave mechanical energy. However, the electric power output is still not large enough, which limits its practical applications. In this work, a nanocomposite electret layer enhanced solid-liquid contact triboelectric nanogenerator (E-TENG) is proposed for water wave energy harvesting, which can effectively improve the electric output and achieve real-time power supply of wireless sensing. Through introducing a nanocomposite electret layer into flexible multilayer solid-liquid contact TENG, higher power output is achieved. The E-TENG (active size of 50 mm × 49 mm) shows desired output performance, a power density of 521 mW m-2. The generated electric energy can drive wireless temperature sensing by transmitting wireless signals carrying detection information at the period of ˂5.5 min. This research greatly improves the electric output and provides a solid basis for the industrialization of TENG in blue energy.

Rapid, Tough, and Trigger-Detachable Hydrogel Adhesion Enabled by Formation of Nanoparticles In Situ.

Integrating hydrogel with other materials is always challenging due to the low mass content of hydrogels and the abundance of water at the interfaces. Adhesion through nanoparticles offers characteristics such as ease of use, reversibility, and universality, but still grapples with challenges like weak bonding. Here, a simple yet powerful strategy using the formation of nanoparticles in situ is reported, establishing strong interfacial adhesion between various hydrogels and substrates including elastomers, plastics, and biological tissue, even under wet conditions. The strong interfacial bonding can be formed in a short time (60 s), and gradually strengthened to 902 J m-2 adhesion energy within an hour. The interfacial layer's construction involves chain entanglement and other non-covalent interactions like coordination and hydrogen bonding. Unlike the permanent bonding seen in most synthetic adhesives, these nanoparticle adhesives can be efficiently triggered for removal by acidic solutions. The simplicity of the precursor diffusion and precipitation process in creating the interfacial layer ensures broad applicability to different substrates and nanoparticle adhesives without compromising robustness. The tough adhesion provided by nanoparticles allows the hydrogel-elastomer hybrid to function as a triboelectric nanogenerator (TENG), facilitating reliable electrical signal generation and output performance due to the robust interface.

Significantly Enhanced Output Performance of Triboelectric Nanogenerators via Charge Storage and Release Strategy.

As a novel energy harvesting technology, bettering the output performance of triboelectric nanogenerators (TENGs) is vital. Although quite a number methods to increase charge density have been proposed, challenges such as high impedance matching and low output current persist, severely limit the energy utilization efficiency of TENGs. Here, a new power management circuit (PMC) is proposed that through charge storage and release strategy. This circuit first excites the surface charge of the TENG using the charge excitation circuit, and then releases the stored charge through a self-triggered switch. Compared to a standard TENG, the output current of the TENG with this PMC is increased by a factor of 1108, the impedance is decreased from 100 MΩ to 10 kΩ, and the energy utilization efficiency is markedly improved. This work affords a reference for enhancing the output performance of TENG, reducing impedance, and broading the utility attainable of TENGs.

Triboelectric Nanogenerator with the Double-Mass Pendulum Integrated Spacer for Galloping Energy Harvesting of Transmission Lines.

The transmission lines galloping severely threatens the safety operation of the power grid. A reliable operation and maintenance alternative is to monitor the transmission lines by wireless sensing and warning devices. In this work, a triboelectric nanogenerator with the double-mass pendulum integrated spacer (DMPS-TENG) is proposed for harvesting the galloping energy of transmission lines and powering the wireless monitoring devices. Specifically, by introducing a double-mass pendulum system, the response frequency of the DMPS-TENG is reduced, allowing it to harvest energy at lower frequencies in the range of transmission lines galloping (0-3 Hz). Hereby, enhancing the energy harvesting bandwidth and the efficiency. The experiments show that with the introduction of the double-mass pendulum, the optimum frequency of the harvester is reduced from 2.4 to 1.9 Hz, enhances the harvesting bandwidth by 18%, and enables an average power output of up to 0.32 mW. Additionally, to demonstrate the practical value, a prototype is designed and fabricated to perform three different application experiments in the multi-split transmission lines simulation system. This work presents an innovative approach for galloping energy harvesting of transmission lines, which can be used to inform further development of sensor networks and visualization of the power grid.

From Friction to Function: A High-Voltage Sliding Triboelectric Nanogenerator for Highly Efficient Energy Autonomous IoTs and Self-Powered Actuation.

An advanced energy autonomous system that simultaneously harnesses and stores energy on the same platform offers exciting opportunities for the near-future self-powered miniature electronics. However, achieving optimal synchronization between the power output of an energy harvester and the storage unit or integrating it seamlessly with real-time microelectronics to build a highly efficient energy autonomous system remains challenging. Herein, a unique bimetallic layered double hydroxide (LDH) based tribo-positive layer is introduced for a high-voltage sliding triboelectric nanogenerator (S-TENG) with an output voltage of ≈1485 V and power output of 250 µW, respectively. To demonstrate the potential of a self-charging power system, S-TENG is integrated with on-chip micro-supercapacitors (MSCs) as a storage unit. The MSC array effectively self-charged up to 4.8 V (within 220s), providing ample power to support micro-sensory systems. In addition, by utilizing the high-voltage output of the S-TENG, the efficient operation of electrostatic actuators and digital microfluidic (DMF) systems driven directly by simple mechanical motion is further demonstrated. Overall, this work can provide a solid foundation for the advancement of next-generation energy-autonomous systems.