A study of a novel coprocessed dry binder composed of α-lactose monohydrate, microcrystalline cellulose and corn starch.

This paper deals with a study of the novel coprocessed dry binder Combilac®, which contains 70% of α-lactose monohydrate, 20% of microcrystalline cellulose and 10% of native corn starch. These tests include flow properties, compressibility, lubricant sensitivity, tensile strength and disintegration time of tablets. Compressibility is evaluated by means of the energy profile of compression process, test of stress relaxation and tablet strength. The above-mentioned parameters are also evaluated in the physical mixture of α-lactose monohydrate, microcrystalline cellulose and native corn starch and compared with Combilac. Combilac shows much better flowability than the physical mixture of the used dry binders. Its compressibility is better, tablets possess a higher tensile strength. Neither Combilac, nor the physical mixture can be compressed without lubricants due to high friction and sticking to the matrix. Combilac has a higher lubricant sensitivity than the physical mixture of the dry binders. Disintegration time of Combilac tablets is comparable with the disintegration time of tablets made from the physical mixture.

Effect of co-processed excipient type on properties of orodispersible tablets containing captopril, tramadol, and domperidone.

An important feature of orodispersible tablets (ODTs) is the convenient administration of the drugs, in some cases, faster onset of action, stability maintenance, and dose precision. This work focused on the preparation of ODTs containing mannitol-based co-processed excipients Prosolv® ODT G2, Ludiflash® and Parteck® ODT in combination with tramadol, captopril, and domperidone by direct compression. Prosolv® ODT G2 showed high energy of plastic deformation due to the content of microcrystalline cellulose. Parteck® ODT provided compact tablets due to the content of granulated mannitol. All drugs decreased tensile strength, increased friability, prolonged disintegration time, and decreased the porosity of tablets. Tablets containing Prosolv® ODT G2 with captopril, domperidone, and tramadol; and Parteck® ODT with domperidone met the requirements for ODTs production, i.e., friability ≤ 1% and disintegration time ≤ 180 s, fast wetting time, high water absorption ratio, and adequate tensile strength. The disintegration time was tested using both the pharmacopeial method and the BJKSN-13 apparatus. The results indicate the significant difference between these methods, with the disintegration time being longer when tested with the BJKSN-13 instrument.

Study of rheological and tableting properties of lubricated mixtures of co-processed dry binders for orally disintegrating tablets.

Co-processed dry binders for ODTs are important multifunctional excipients for tablet manufacturing by direct compression. Testing their binary mixtures with lubricants is an important aspect of their use in combination with drugs. The aim of this study was to evaluate the rheological and compression properties of lubricated mixtures of co-processed dry binders Parteck® ODT, Prosolv® ODT G2 and Ludiflash®, and subsequently also the compactability and disintegration time of the tablets made thereof. The lubricants employed were magnesium stearate and sodium stearyl fumarate in the concentrations of 0.5% and 1%. The best flowability was shown by Prosolv® ODT G2 combined with magnesium stearate in the concentration of 0.5%. Lubricated mixtures with Prosolv® ODT G2 showed a lower angle of internal friction as well as lower pre-compression energy values. The values of plastic deformation energy were the highest in the case of Prosolv® ODT G2, which was also reflected in the highest tablet strength. On the contrary, the ejection force values were the lowest for this co-processed dry binder. Magnesium stearate reduced the ejection force more effectively than sodium stearyl fumarate. Prosolv® ODT G2 tablets exhibited the highest tensile strength and shortest disintegration time.

Comparative evaluation of the use of dry binders in a physical mixture or as a coprocessed dry binder in matrix tablets with extended drug release.

This paper evaluates and compares the properties of directly compressible tabletting materials and matrix tablets containing a combination of α-lactose monohydrate and microcrystalline cellulose in the 3:1 ratio in a physical mixture and in a coprocessed dry binder. Tested parameters include flow properties, compressibility, compactibility and the rate of drug release from tablets. Compressibility is evaluated by means of the energy profile of the compression process. Compactibility is evaluated by means of the tensile strength of the tablets. Dissolution testing is done using the rotating basket method. Dissolution profiles are evaluated by non-linear regression analysis. Total energy of compression and plasticity values were higher in tabletting materials with the coprocessed dry binder. Increasing additions of polyvinyl alcohol decreased the values of total energy of compression, plasticity, tensile strength of tablets and drug release rate. Dissolution behaviour of tablets, which contained the physical mixture or coprocessed dry binder and the same amount of polyvinyl alcohol, was comparable.