Studies on eggless mayonnaise from rice bran and sesame oils.

Mayonnaise was prepared by replacing refined sunflower oil with physically refined rice bran oil (RBO), filtered sesame oil (SO) and blends of both RBO:SO. Emulsions were formulated using xanthan gum as a replacer for egg. The effect of replacing xanthan gum on varying oil blends (RBO:SO) on the physicochemical properties such as texture (consistency), stability, viscosity, and bioactives (oryzanol and sesamol content) were also studied. Significant differences were observed in the fat content of the emulsions prepared. Xanthan gum based mayonnaise's had 63-65% fat, whereas control sample with egg had 78% fat. The spreadability ranged between 1.2 and 1.6 N and stability of these spreads was found to be better than that of control. Mayonnaise with the desired colour, optimum spreadability and excellent emulsion stability could be prepared using RBO, and blends of RBO:SO. Significant differences were seen in the instrumental consistency and rheological studies among the mayonnaises prepared. The present study focusses on the preparation of a healthy mayonnaise using rice bran and sesame oil and their blends which have beneficial health effects due to the presence of oryzanol and sesamol.

Thermal degradation of groundnut oil during continuous and intermittent frying.

The quality of refined groundnut oil, as affected by frying Poori, was assessed with respect to two types of frying operations viz., continuous frying and intermittent frying. Continuous frying was carried out consistently for 8 h, whereas intermittent frying was performed for 2 h everyday for 4 days for a total of 8 frying hours. The purpose of the study was to compare the level of deterioration that occurred during the two operations. Among the parameters studied, peroxide value (11.3 ± 0.26 meqO2/kg), anisidine value (172.4 ± 2.71), diene value (1.57 ± 0.095), oxidized fatty acid (2.6 ± 0.17%) and viscosity (103.8 ± 2.5 mPa s(-1)), were found to be higher after 8 h due to intermittent frying. The corresponding values 4.9 ± 0.15, 133.3 ± 0.49, 0.811 ± 0.04, 0.38 ± 0.023 and 81.8 ± 2.02 were observed in continuous frying. Parameters such as iodine value, unsaturated fatty acids, saponification value and smoke point decreased significantly (P < 0.5) due to intermittent frying. Results showed that intermittent frying caused more quality degradation to GNO than continuous frying.

Studies on soft centered coated snacks.

Roasted groundnut seeds, amaranth and dates pulp formed the center filling which was coated with sugar, breadings, desiccated coconut and roasted Bengalgram flour (BGF) to get 4 coated snacks. Physicochemical characteristics, microbiological profile, sorption behaviour and sensory quality of 4 coated snacks were determined. Centre filling to coating ratio of the products were in the range of 3:2-7:1, the product having BGF coating had the thinnest coating. Center filling had soft texture and the moisture content was 10.2-16.2% coating had lower moisture content (4.4-8.6%) except for Bengal gram coating, which had 11.1% moisture. Sugar coated snack has lowest fat (11.6%) and protein (7.2%) contents. Desiccated coconut coated snack has highest fat (25.4%) and Bengal gram flour coated snack had highest protein content (15.4%). Sorption studies showed that the coated snack had critical moisture content of 11.2-13.5%. The products were moisture sensitive and hence require packaging in films having higher moisture barrier property. In freshly prepared snacks coliforms, yeast and mold were absent. Mesophillic aerobes count did not show significant change during 90 days of storage at 27 °C and 37 °C. Sensory analysis showed that products had a unique texture due to combined effect of fairly hard coating and soft center. Flavour and overall quality of all the products were rated as very good.

Frying of the Dispersion Droplets with Varying Contents of Chickpea Flour and Gum Arabic: Product Characterization and Modeling.

Dispersions having chickpea (37%, 40%, and 43%, w/w) and gum arabic (0%, 1%, 2%, 3%, 4%, and 5%, w/w) solids were prepared. These dispersion droplets were fried, and the physical, sensory, and microstructural characteristics of the fried products were determined. The oil content in the fried snack decreased up to 20.3% when the level of chickpea and/or gum in the dispersions was increased. The compression curve for fried snack showed 5 major zones and exhibited the failure phenomenon. Failure force (6.5 to 11.4 N) increased with chickpea flour in the dispersions. Fracture strain (12.0% to 19.5%) indicated that all the fried samples were soft-crisp products. An increase in chickpea flour concentration offered an ovoid/oblong shape of dispersion droplets while falling to oil, and changed the spherical shape of the fried snack. The near-spherical product could be obtained by using 37% chickpea flour containing 0 to 2% of gum arabic, or with the 40% and 0 to 1% combinations. The hue or dominant wavelength increased from 578.5 nm (flour) to 581.0 to 582.7 nm (product) indicating a shift toward red coloration. A porous microstructure with scattered small cavities and large vacuoles of the fried snack were observed; big vacuoles were located in the inner portion of the fried product. The cells were divided into closed and open cells and were characterized by image analysis. The air cells usually had an elliptical shape with varying sizes; the cell wall thickness was between 12 and 80 µm. An artificial neural network (ANN) structure of 2-9-2 was developed for the prediction of sensory overall acceptability and oil content of the fried snack. PRACTICAL APPLICATION: Chickpea flour is used in several food preparations. The addition of gum arabic affects the textural and structural characteristics, and the sensory acceptance; the fried dispersion droplets have a lower fat content when gum arabic is used compared to samples fried without the addition of gum arabic. The fried dispersion droplets change their shape with the level of the ingredients used in the dispersion.