RESUMO
Aqueous zinc ion battery (AZIBs) has attracted the attention of many researchers because of its safety, economy, environmental protection, and high ionic conductivity of electrolytes. However, the battery greatly suffers from zinc dendrite produced by zinc metal anode leading to poor cycle life and even unsafe problems, which limit its further development for various important applications. It is known that the success of the commercialization of lithium-ion batteries (LIBs) is mainly due to replacement of lithium metal anode with graphite, which avoids the formation of Li dendrite. Therefore, it is an important step to develop aqueous zinc ion anode to replace conventional zinc metal one with zinc-metal free anode material. In this review, the working principle and development prospect of "rocking-chair" AZIBs are introduced. The research progress of different types of zinc metal-free anode materials and cathode materials in "rocking-chair" AZIBs is reviewed. Finally, the limitations and challenges of the Zn metal-free "rocking-chair" AZIBs as well as solutions are deeply discussed, aiming to provide new strategies for the development of advanced zinc-ion batteries.
RESUMO
Metal phosphides with easy synthesis, controllable morphology, and high capacity are considered as potential anodes for sodium-ion batteries (SIBs). However, the inherent shortcomings of metal phosphating materials, such as conductivity, kinetics, volume strain, etc are not satisfactory, which hinders their large-scale application. Here, a CoP@carbon nanofibers-composite containing rich CoâNâC heterointerface and phosphorus vacancies grown on carbon cloth (CoP1-x@MEC) is synthesized as SIB anode to accomplish extraordinary capacity and ultra-long cycle life. The hybrid composite nanoreactor effectively impregnates defective CoP as active reaction center while offering CoâNâC layer to buffer the volume expansion during charge-discharge process. These vast active interfaces, favored electrolyte infiltration, and a well-structured ion-electron transport network synergistically improve Na+ storage and electrode kinetics. By virtue of these superiorities, CoP1-x@MEC binder-free anode delivers superb SIBs performance including a high areal capacity (2.47 mAh cm-2@0.2 mA cm-2), high rate capability (0.443 mAh cm-2@6 mA cm-2), and long cycling stability (300 cycles without decay), thus holding great promise for inexpensive binder-free anode-based SIBs for practical applications.
RESUMO
Ni(OH)2 nanosheet, acting as a potential active material for supercapacitors, commonly suffers from sluggish reaction kinetics and low intrinsic conductivity, which results in suboptimal energy density and long cycle life. Herein, a convenient electrochemical halogen functionalization strategy is applied for the preparation of mono/bihalogen engineered Ni(OH)2 electrode materials. The theoretical calculations and experimental results found that thanks to the extraordinarily high electronegativity, optimal reversibility, electronic conductivity, and reaction kinetics could be achieved through F functionalization . However, benefiting from the largest ionic radius, INi(OH)2 contributes the best specific capacity and morphology transformation, which is a new finding that distinguishes it from previous reports in the literature. The exploration of the interaction effect of halogens (F, INi(OH)2 , F, BrNi(OH)2 , and Cl, INi(OH)2 ) manifests that F, INi(OH)2 delivers a higher specific capacity of 200.6 mAh g-1 and an excellent rate capability of 58.2% due to the weaker electrostatic repulsion, abundant defect structure, and large layer spacing. Moreover, the F, INi(OH)2 //FeOOH@NrGO device achieves a high energy density of 97.4 Wh kg-1 and an extremely high power density of 32426.7 W kg-1 , as well as good cycling stability. This work develops a pioneering tactic for designing energy storage materials to meet various demands.
RESUMO
Interfacial chemical modification is an effective strategy to adjust the strong Coulombic ion-lattice interactions with high valence cations experienced by electrode materials, facilitating the reaction kinetic. In this paper, a simple and fast surface oxygen implantation strategy was designed to adjust the electronic structure of stainless steel (SS) supported vanadium diselenide (VSe2) nanosheets and form a surface protective film, which effectively accelerates the reaction kinetics of Zn2+ and extends the cycle life of the battery. It is demonstrated that the conductivity, pseudocapacitance and specific capacity can be tuned by selectively introducing oxygen species to the surface, which provides an important reference for the design of electrodes with controlled surface chemistry. Density functional theory (DFT) calculations also confirm that the electronic structure can be adjusted by surface oxygen injection strategy, which not only improves the conductivity, but also adjusts the adsorption energy, thus providing favorable conditions for zinc ion storage. Benefiting from the selenium vacancies and pores generated by the removal of part of selenium, and the oxide film formed on the surfaces, the VSe2-xOx-SS-30 electrode showed higher specific capacity (188.4 mAh/g at 0.5 A g-1 after 50 cycles), better rate performance (107.1 mAh/g at 4 A g-1) and more satisfactory cycling stability (83.1 mAh/g at 5 A g-1 after 1800 cycles) than VSe2-SS electrode. Importantly, the flexible quasi-solid-state VSe2-xOx-SS-30//Zn battery also exhibits high specific capacity and excellent environmental adaptability. Furthermore, the zinc (de)intercalation and transformation reactions mechanism was revealed by some ex-situ/in-situ techniques.
RESUMO
Vanadium nitride (VN) is a potential cathode material with high capacity and high energy density for aqueous zinc batteries (AZIBs). However, the slow kinetics resulting from the strong electrostatic interaction of the electrode materials with zinc ions is a major challenge for fast storage. Here, VN clusters with nitrogen-vacancy embedded in carbon (C) (Nv-VN/C-SS-2) are prepared for the first time to improve the slow reaction kinetics. The nitrogen vacancies can effectively accelerate the reaction kinetics, reduce the electrochemical polarization, and improve the performance. The density functional theory (DFT) calculations also prove that the rapid adsorption and desorption of zinc ions on Nv-VN/C-SS-2 can release more electrons to the delocalized electron cloud of the material, thus adding more active sites. The Nv-VN/C-SS-2 exhibits a specific capacity and outstanding cycle life. Meanwhile, the quasi-solid-state battery exhibits a high capacity of 186.5 mAh g-1, ultra-high energy density of 278.9 Wh kg-1, and a high power density of 2375.1 W kg-1 at 2.5 A g-1, showing excellent electrochemical performance. This work provides a meaningful reference value for improving the comprehensive electrochemical performance of VN through interface engineering.
RESUMO
A metal-organic framework (MOF) is used to thermally grow cobalt selenophosphide (CoSeP) nanoparticles on an N-doped 2-dimensional carbon matrix (CoSeP@N-C), resulting in an assembled unique 3-dimensional bean sprout-like nanosheet composite with massive defects as an advanced anode material of sodium ion batteries. The results indicate that the massive defects in the CoSeP@N-C sprout-like 3-D structure can offer high density of reaction sites and well accommodate the volume change during the sodiation/desodiation process, while rendering abundant channels for rapid transport of sodium ions, thereby synergistically making the CoSeP@N-C anode much more reversible for the sodium ion storage process and producing higher rate performance than those of CoP2 and CoSe2@N-C. The ex situ X-ray diffraction, ex situ Raman and ex situ TEM analyses further confirm the mechanism of sodium storage intercalation and transformation in CoSeP@N-C. This work vividly demonstrates a rational design of metal selenophosphide anodes as an effective strategy to accomplish fast and high sodium-ion storage.
RESUMO
Aqueous zinc (Zn) ion battery (AZIB) has become one of the research hotspot in the field of energy storage due to its low cost, green environmental protection, high theoretical capacity, and high safety. However, the unrestrained growth of the dendrites leads to the occurrence of side reactions, such as corrosion of the electrodes and generation of hydrogen, which reduces the coulombic efficiency and performance of the battery. Herein, a simple method reports pasting a conductive copper glue (CCG) coating on the surface of Zn anode to improve the serious dendrite growth. The coating has strong intermolecular interaction and high conductivity, which not only avoids the occurrence of side reactions but also facilitates the uniform deposition of Zn2+ ions, preventing dendrite formation. The symmetrical battery assembled with Zn anode modified by CCG coating delivers longer cycle life (167 h) and lower voltage hysteresis (≈26 mV), which is much better than that of bare Zn symmetrical battery (30 h, ≈67 mV). Furthermore, the full battery assembly with modified Zn anode and stainless steel (SS) supported V2O5 nanospheres (VO-SS) cathode exhibit high capacity and long cycle life (113.5 mAh g-1 after 4000 cycles at 4.8 A g-1).
RESUMO
In this work, oxygen-defect-rich, three-dimensional (3D) cobalt-gallium layered double hydroxides (Co0.50-Ga0.50-LDH) assembled by porous and ultrathin nanosheets are prepared by a simple one-step strategy. Briefly, an aqueous solution containing Co2+ and Ga3+ is quickly pouring into the aqueous solution of hexamethylenetetramine, the state-of-the-art LDH was obtained followed by a mild and fast hydrothermal reaction. This mild and rapid synthesis strategy introduces a large number of pores into the ultrathin LDH nanosheets, resulting in a high concentration of oxygen vacancies in the Co0.50-Ga0.50-LDH, and the concentration of oxygen vacancies can be arbitrarily modulated, which has been corroborated by X-ray photoelectron spectroscopy and electron spin resonance measurements. The synergistic effect of the oxygen vacancy and the introduced Ga ions in the LDH nanosheets enhances the adsorption of the LDH nanosheets on OH-, endowing Co0.50-Ga0.50-LDH with outstanding performance for the supercapacitor application. Co0.50-Ga0.50-LDH offers a high specific capacity (0.62C·cm-2) at 10 mV·s-1 and extraordinary cycling stability. An aqueous asymmetric supercapacitor (ASC) constructed with Co0.50-Ga0.50-LDH and activated carbon (AC) materials exhibits high energy density and a long lifespan. This result encourages the wide application of porous ultrathin LDH nanosheets in energy storage, catalysis and light response.
RESUMO
The property of an active material is not only influenced by its morphology and size, but also by its crystal phase. The present phase regulation of nickel sulfide is mainly achieved by controlling the participation of sulfur source in reaction. Thus, new perspectives direct at phase control need to be explored and supplemented. Herein, we proposed a novel coordination agent-dominated phase modulation strategy assisted by a hydrothermal process. It is found that increasing the amount of coordination agent can drove the phase transformation from the initial composite of ß-NiS/α-NiS/Ni3S4 to ß-NiS/α-NiS, and then to pure ß-NiS. The mechanism of phase regulation has been proposed, and the general application of this method has been demonstrated. By employing coordination agent, the size of resulted products is reduced, and the morphology is optimized. As a result, all of the pure ß-NiS electrodes indicate significantly enhanced specific capacity than the pristine ß-NiS/α-NiS/Ni3S4 composite. Notably, the sample synthesized with 3 mmol of urea (S11) shows uniform morphology and smallest size, and it gives a highest specific capacity of 223.8 mAh g-1 at 1 A g-1, almost 1.5 times of the original sample. The fabricated S11//rGO device delivers a high energy density of 56.6 Wh·kg-1 at a power density of 407.5 W·kg-1, and keeps an impressive capacity retention of 84% after 20,000 cycles. This work put forwards a new prospect for controlling the phase and composition of nickel sulfide based on coordination chemistry.
RESUMO
Aqueous zinc ion battery (AZIB) is a promising battery system developed in recent years, which has the advantages of safety, environmental protection and low price. However, it is still a puzzle to develop and improve cathode materials with satisfactory performance. In this paper, the chromium vanadate (CrVO3) electrode material was reported for the first time. The obtained CrVO3 have mesoporous structure (the mesopore sizes: 2-50 nm), excellent conductivity, high surface area (129.3 m2 g-1) and uniform thickness of 2 nm, which provides a short path for rapid transfer of zinc ions, a large surface area for high pseudocapacitance, and sufficient voids to mitigate volume expansion. Given these structural advantages, the CrVO3 cathode delivers high capacities of 188.8 and 112.8 mAh g-1 at 0.5 and 4 A g-1 and excellent long cycle stability, respectively. More importantly, the Zn//CrVO3 battery provided an energy density of 231.9 Wh kg-1 at a power density of 100.4 W kg-1. Meanwhile, insight into the formation mechanism and Zn2+ storage mechanism by ex situ methods. The results show that the porous CrVO3 is a promising cathode material for AZIBs, which provide a valuable idea for the design of porous vanadate with significantly enhanced performances in electrochemical energy storage.
RESUMO
As a typical transition-metal dichalcogenides, vanadium diselenide (VSe2) is a promising electrode material for aqueous zinc-ion batteries due to its metallic characteristics and excellent electronic conductivity. In this work, we propose a strategy of hydrothermal reduction synthesis of stainless-steel (SS)-supported VSe2 nanosheets with defect (VSe2-x-SS), thereby further improving the conductivity and activity of VSe2-x-SS. Density functional theory calculations confirmed that Se defect can adjust the adsorption energy of Zn2+ ions. This means that the adsorption/desorption process of Zn2+ ions on VSe2-x-SS is more reversible than that on pure SS-supported VSe2 (VSe2-SS). As a result, the Zn//VSe2-x-SS battery showed more excellent electrochemical performance than Zn//VSe2-SS. The VSe2-x-SS electrode shows a good specific capacity of 265.2 mA h g-1 (0.2 A g-1 after 150 cycles), satisfactory rate performance, and impressive cyclic stability. In addition, we also have explored the energy-storage mechanism of Zn2+ ions in this VSe2-x-SS electrode material. This study provides an effective strategy for the rational design of electrode materials for electrochemical energy-storage devices.