RESUMO
A highly enantioselective formal hydroformylation of vinyl arenes enabled by copper hydride (CuH) catalysis is reported. Key to the success of the method was the use of the mild Lewis acid zinc triflate to promote the formation of oxocarbenium electrophiles through the activation of diethoxymethyl acetate. Using the newly developed protocol, a broad range of vinyl arene substrates underwent efficient hydroacetalization reactions to provide access to highly enantioenriched α-aryl acetal products in good yields with exclusively branched regioselectivity. The acetal products could be converted to the corresponding aldehydes, alcohols, and amines with full preservation of the enantiomeric purity. Density functional theory studies support that the key C-C bond-forming event between the alkyl copper intermediate and the oxocarbenium electrophile takes place with inversion of configuration of the Cu-C bond in a backside SE2-type mechanism.
RESUMO
We report a general and functional-group-tolerant method for the Cu-catalyzed amination of base-sensitive aryl bromides including substrates possessing acidic functional groups and small five-membered heteroarenes. The results presented herein substantially expand the scope of Cu-catalyzed C-N coupling reactions. The combination of L8, an anionic N1,N2-diarylbenzene-1,2-diamine ligand, along with the mild base NaOTMS leads to the formation of a stable yet reactive catalyst that resists deactivation from coordination to heterocycles or charged intermediates. This system enables the use of low catalyst and ligand loadings. Exploiting the differences in nucleophile deprotonation in C-O and C-N coupling reactions catalyzed by Cu·L8 we developed a method to chemoselectively N- and O-arylate a variety of amino alcohol substrates. Employing NaOt-Bu as the base resulted exclusively in C-O coupling when the amino alcohols featured primary alcohols and more hindered amines or aniline groups. Utilizing NaOTMS enabled the ability to override the steric-based selectivity of these reactions completely and exclusively promoted C-N coupling regardless of the structure of the amino alcohol. The ability to invert the observed chemoselectivity is distinct from previously described methods that require protecting group manipulations or rely entirely on steric effects to control reactivity. These results substantially improve the scope of Cu-catalyzed C-N coupling reactions using N1,N2-diarylbenzene-1,2-diamine ligands and introduce a new chemoselective method to arylate amino alcohols.
Assuntos
Amino Álcoois , Cobre , Cobre/química , Catálise , Aminação , Amino Álcoois/química , Estrutura Molecular , Brometos/química , Hidrocarbonetos Bromados/química , LigantesRESUMO
The utility of antibody therapeutics is hampered by potential cross-reactivity with healthy tissue. Over the past decade, significant advances have been made in the design of activatable antibodies, which increase, or create altogether, the therapeutic window of a parent antibody. Of these, antibody prodrugs (pro-antibodies) are masked antibodies that have advanced the most for therapeutic use. They are designed to reveal the active, parent antibody only when encountering proteases upregulated in the microenvironment of the targeted disease tissue, thereby minimizing off-target activity. However, current pro-antibody designs are relegated to fusion proteins that append masking groups restricted to the use of only canonical amino acids, offering excellent control of the site of introduction, but with no authority over where the masking group is installed other than the N-terminus of the antibody. Here, we present a palladium-based bioconjugation approach for the site-specific introduction of a masked tyrosine mimic in the complementary determining region of the FDA approved antibody therapeutic ipilimumab used as a model system. The approach enables the introduction of a protease cleavable group tethered to noncanonical polymers (polyethylene glycol (PEG)) resulting in 47-fold weaker binding to cells expressing CTLA-4, the target antigen of ipilimumab. Upon exposure to tumor-associated proteases, the masking group is cleaved, unveiling a tyrosine-mimic (dubbed hydroxyphenyl cysteine (HPC)) that restores (>90% restoration) binding affinity to its target antigen.
Assuntos
Pró-Fármacos , Tirosina , Pró-Fármacos/química , Pró-Fármacos/farmacologia , Humanos , Tirosina/química , Paládio/química , Estrutura Molecular , Imunoconjugados/químicaRESUMO
We disclose the development of a Cu-catalyzed C-O coupling method utilizing a new N1,N2-diarylbenzene-1,2-diamine ligand, L8. Under optimized reaction conditions, structurally diverse aryl and heteroaryl bromides underwent efficient coupling with a variety of alcohols at room temperature using an L8-based catalyst. Notably, the L8-derived catalyst exhibited enhanced activity when compared to the L4-based system previously disclosed for C-N coupling, namely the ability to functionalize aryl bromides containing acidic functional groups. Mechanistic studies demonstrate that C-O coupling utilizing L8 â Cu involves rate-limiting alkoxide transmetallation, resulting in a mechanism of C-O bond formation that is distinct from previously described Pd-, Cu-, or Ni-based systems. This lower energy pathway leads to rapid C-O bond formation; a 7-fold increase relative to what is seen with other ligands. The results presented in this report overcome limitations in previously described C-O coupling methods and introduce a new ligand that we anticipate may be useful in other Cu-catalyzed C-heteroatom bond-forming reactions.
RESUMO
We report a versatile and functional-group-tolerant method for the Pd-catalyzed C-N cross-coupling of five-membered heteroaryl halides with primary and secondary amines, an important but underexplored transformation. Coupling reactions of challenging, pharmaceutically relevant heteroarenes, such as 2-H-1,3-azoles, are reported in good-to-excellent yields. High-yielding coupling reactions of a wide set of five-membered heteroaryl halides with sterically demanding α-branched cyclic amines and acyclic secondary amines are reported for the first time. The key to the broad applicability of this method is the synergistic combination of (1) the moderate-strength base NaOTMS, which limits base-mediated decomposition of sensitive five-membered heteroarenes that ultimately leads to catalyst deactivation, and (2) the use of a GPhos-supported Pd catalyst, which effectively resists heteroarene-induced catalyst deactivation while promoting efficient coupling, even for challenging and sterically demanding amines. Cross-coupling reactions between a wide variety of five-membered heteroaryl halides and amines are demonstrated, including eight examples involving densely functionalized medicinal chemistry building blocks.
RESUMO
Ullmann-type C-N coupling reactions represent an important alternative to well-established Pd-catalyzed approaches due to the differing reactivity and the lower cost of Cu. While the design of anionic Cu ligands, particularly those by Ma, has enabled the coupling of various classes of aryl halides and alkyl amines, most methods require conditions that can limit their utility on complex substrates. Herein, we disclose the development of anionic N1,N2-diarylbenzene-1,2-diamine ligands that promote the Cu-catalyzed amination of aryl bromides under mild conditions. Guided by DFT calculations, these ligands were designed to (1) increase the electron density on Cu, thereby increasing the rate of oxidative addition of aryl bromides, and (2) stabilize the active anionic CuI complex via a π-interaction. Under optimized conditions, structurally diverse aryl and heteroaryl bromides and a broad range of alkyl amine nucleophiles, including pharmaceuticals bearing multiple functional groups, were efficiently coupled at room temperature. Combined computational and experimental studies support a mechanism of C-N bond formation that follows a catalytic cycle akin to the well-explored Pd-catalyzed variants. Modification of the ligand structure to include a naphthyl residue resulted in a lower energy barrier to oxidative addition, providing a 30-fold rate increase relative to what is seen with other ligands. Collectively, these results establish a new class of anionic ligands for Cu-catalyzed C-N couplings, which we anticipate may be extended to other Cu-catalyzed C-heteroatom and C-C bond-forming reactions.
RESUMO
Alkenes are ubiquitous in organic chemistry, yet many classes of alkenes remain challenging to access by current synthetic methodology. Herein, we report a copper hydride-catalyzed approach for the synthesis of Z-configured trisubstituted alkenes with high stereo- and regioselectivity via alkyne hydroalkylation. A DTBM-dppf-supported Cu catalyst was found to be optimal, providing a substantial increase in product yield compared to reactions conducted with dppf as the ligand. DFT calculations show that the DTBM substitution leads to the acceleration of alkyne hydrocupration through combined ground and transition state effects related to preventing catalyst dimerization and enhancing catalyst-substrate dispersion interactions, respectively. Alkyne hydroalkylation was successfully demonstrated with methyl and larger alkyl tosylate electrophiles to produce a variety of (hetero)aryl-substituted alkenes in moderate to high yields with complete selectivity for the Z stereochemically configured products. In the formation of the key C-C bond, computational studies revealed a direct SN2 pathway for alkylation of the vinylcopper intermediate with in situ-formed alkyl iodides.
RESUMO
Pd-catalyzed nucleophilic fluorination reactions are important methods for the synthesis of fluoroarenes and fluoroalkenes. However, these reactions can generate a mixture of regioisomeric products that are often difficult to separate. While investigating the Pd-catalyzed fluorination of cyclic vinyl triflates, we observed that the addition of a substoichiometric quantity of TESCF3 significantly improved the regioselectivity of the reaction. Herein, we report a combined experimental and computational study on the mechanism of this transformation focusing on the role of TESCF3 . The poor regioselectivity of the reaction in the absence of additives results from the formation of LPd-cyclohexyne complexes (L=biaryl monophosphine ligand). When TESCF3 is added to the reaction mixture, the generation of the Pd-cyclohexyne complexes is diminished by an unexpected pathway involving the dearomatization of the ligand by nucleophilic attack from a trifluoromethyl anion (CF3 - ).
RESUMO
The selective reductive coupling of vinyl heteroarenes with aldehydes and ketones represents a versatile approach for the rapid construction of enantiomerically enriched secondary and tertiary alcohols, respectively. Herein, we demonstrate a CuH-catalyzed regiodivergent coupling of vinyl heteroarenes with carbonyl-containing electrophiles, in which the selectivity is controlled by the ancillary ligand. This approach leverages an in situ generated benzyl- or dearomatized allyl-Cu intermediate, yielding either the dearomatized or exocyclic addition products, respectively. The method exhibits excellent regio-, diastereo-, and enantioselectivity and tolerates a range of common functional groups and heterocycles. The dearomative pathway allows direct access to a variety of functionalized saturated heterocyclic structures. The reaction mechanism was probed using a combination of experimental and computational approach. Density functional theory studies suggest that the ligand-controlled regioselectivity results from the C-H/π interaction and steric repulsion in transition states, leading to the major and minor regioisomers, respectively. Hydrocupration of vinyl heteroarene pronucleophile is the enantiodetermining step, whereas the diastereoselectivity is enforced by steric interactions between the benzylic or allyl-Cu intermediate and carbonyl-containing substrates in a six-membered cyclic transition state.
Assuntos
Álcoois , Aldeídos , Álcoois/química , Aldeídos/química , Catálise , Ligantes , EstereoisomerismoRESUMO
Catalyst transfer polymerization (CTP) is widely applied to the synthesis of well-defined π-conjugated polymers. Unlike other polymerization reactions that can be performed in water (e.g., controlled radical polymerizations and ring-opening polymerizations), CTP has yet to be adapted for the modification of biopolymers. Here, we report the use of protein-palladium oxidative addition complexes (OACs) that enable catalyst transfer polymerization to furnish protein-polyarene conjugates. These polymerizations occur with electron-deficient monomers in aqueous buffers open to air at mild (≤37 °C) temperatures with full conversion of the protein OAC and an average polymer length of nine repeating units. Proteins with polyarene chains terminated with palladium OACs can be readily isolated. Direct evidence of protein-polyarene OAC formation was obtained using mass spectrometry, and all protein-polyarene chain ends were uniformly functionalized via C-S arylation to terminate the polymerization with a small molecule thiol or a cysteine-containing protein.
Assuntos
Paládio , Proteínas , Paládio/química , Polimerização , Polímeros/química , Proteínas/química , Água/químicaRESUMO
The enantioselective installation of a methyl group onto a small molecule can result in the significant modification of its biological properties. While hydroalkylation of olefins represents an attractive approach to introduce alkyl substituents, asymmetric hydromethylation protocols are often hampered by the incompatibility of highly reactive methylating reagents and a lack of general applicability. Herein, we report an asymmetric olefin hydromethylation protocol enabled by CuH catalysis. This approach leverages methyl tosylate as a methyl source compatible with the reducing base-containing reaction environment, while a catalytic amount of iodide ion transforms the methyl tosylate in situ into the active reactant, methyl iodide, to promote the hydromethylation. This method tolerates a wide range of functional groups, heterocycles, and pharmaceutically relevant frameworks. Density functional theory studies suggest that after the stereoselective hydrocupration, the methylation step is stereoretentive, taking place through an SN2-type oxidative addition mechanism with methyl iodide followed by a reductive elimination.
Assuntos
Alcenos , Cobre , Benzenossulfonatos , Catálise , Hidrocarbonetos Iodados , EstereoisomerismoRESUMO
Carboranes represent a class of compounds with increasing therapeutic potential. However, few general approaches to readily embed carboranes into small molecules, peptides, and proteins are available. We report a strategy based on palladium-mediated C-X (X = C, S, and N) bond formation for the installation of carborane-containing moieties onto small molecules and peptides. We demonstrate the ability of Pd-based reagents with appropriate ligands to overcome the high hydrophobicity of the carborane group and enable chemoselective conjugation of cysteine residues at room temperature in aqueous buffer. Accordingly, carboranes can be efficiently installed on proteins by employing a combination of a bis-sulfonated biarylphosphine-ligated Pd reagent in an aqueous histidine buffer. This method is successfully employed on nanobodies, a fully synthetic affibody, and the antibody therapeutics trastuzumab and cetuximab. The conjugates of the affibody ZHER2 and the trastuzumab antibody retained binding to their target antigens. Conjugated proteins maintain their activity in cell-based functional assays in HER2-positive BT-474 cell lines. This approach enables the rapid incorporation of carborane moieties into small molecules, peptides, and proteins for further exploration in boron neutron capture therapy, which requires the targeted delivery of boron-dense groups.
Assuntos
Boranos , Paládio , Boranos/química , Paládio/química , Peptídeos , Proteínas/química , TrastuzumabRESUMO
The chirality, or 'handedness', of a biologically active molecule can alter its physiological properties. Thus it is routine procedure in the drug discovery and development process to prepare and fully characterize all possible stereoisomers of a drug candidate for biological evaluation. Despite many advances in asymmetric synthesis, developing general and practical strategies for obtaining all possible stereoisomers of an organic compound that has multiple contiguous stereocentres remains a challenge. Here, we report a stereodivergent copper-based approach for the expeditious construction of amino alcohols with high levels of chemo-, regio-, diastereo- and enantioselectivity. Specifically, we synthesized these amino-alcohol products using sequential, copper-hydride-catalysed hydrosilylation and hydroamination of readily available enals and enones. This strategy provides a route to all possible stereoisomers of the amino-alcohol products, which contain up to three contiguous stereocentres. We leveraged catalyst control and stereospecificity simultaneously to attain exceptional control of the product stereochemistry. Beyond the immediate utility of this protocol, our strategy could inspire the development of methods that provide complete sets of stereoisomers for other valuable synthetic targets.
Assuntos
Amino Álcoois/química , Amino Álcoois/síntese química , Técnicas de Química Sintética , Cobre/química , Aminação , Catálise , Estrutura Molecular , EstereoisomerismoRESUMO
The asymmetric hydroaminocarbonylation of olefins represents a straightforward approach for the synthesis of enantioenriched amides, but is hampered by the necessity to employ CO gas, often at elevated pressures. We herein describe, as an alternative, an enantioselective hydrocarbamoylation of alkenes leveraging dual copper hydride and palladium catalysis to enable the use of readily available carbamoyl chlorides as a practical carbamoylating reagent. The protocol is applicable to various types of olefins, including alkenyl arenes, terminal alkenes, and 1,1-disubstituted alkenes. Substrates containing a diverse range of functional groups as well as heterocyclic substructures undergo functionalization to provide α- and ß-chiral amides in good yields and with excellent enantioselectivities.
Assuntos
Alcenos , Paládio , Alcenos/química , Amidas/química , Catálise , Estrutura Molecular , Paládio/química , EstereoisomerismoRESUMO
α-Stereogenic allyl metalloids are versatile synthetic intermediates which can undergo various stereocontrolled transformations. Most existing methods to prepare α-stereogenic allyl metalloids involve multi-step sequences that curtail the number of compatible substrates and are limited to the synthesis of boronates. Here, we report a general method for the enantioselective preparation of α-stereogenic allyl metalloids utilizing dual CuH- and Pd-catalysis. This approach leverages a stereoretentive Cu-to-Pd transmetalation of an in situ generated alkyl copper species to allow access to enantioenriched allyl silanes, germanes, and boronate esters with broad functional group compatibility.
Assuntos
Metaloides , Paládio , Silanos , Cobre , Ésteres , Estereoisomerismo , Estrutura Molecular , CatáliseRESUMO
We report a method to prepare α-chiral carboxylic acid derivatives, including those bearing all-carbon quaternary centers, through an enantioselective CuH-catalyzed hydrocarboxylation of allenes with a commercially available fluoroformate. A broad range of heterocycles and functional groups on the allenes were tolerated in this protocol, giving enantioenriched α-quaternary and tertiary carboxylic acid derivatives in good yields with exclusive branched regioselectivity. The synthetic utility of this approach was further demonstrated by derivatization of the products to afford biologically important compounds, including the antiplatelet drug indobufen.
Assuntos
Ácidos Carboxílicos/química , Cobre/química , Hidrocarbonetos/química , Catálise , EstereoisomerismoRESUMO
The catalytic enantioselective synthesis of α-chiral olefins represents a valuable strategy for rapid generation of structural diversity in divergent syntheses of complex targets. Herein, we report a protocol for the dual CuH- and Pd-catalyzed asymmetric Markovnikov hydroalkenylation of vinyl arenes and the anti-Markovnikov hydroalkenylation of unactivated olefins, in which readily available enol triflates can be utilized as alkenyl coupling partners. This method allowed for the synthesis of diverse α-chiral olefins, including tri- and tetrasubstituted olefin products, which are challenging to prepare by existing approaches.
Assuntos
Álcoois/química , Alcenos/química , Cobre/química , Paládio/química , Catálise , EstereoisomerismoRESUMO
Transcription factors (TF), such as Myc, are proteins implicated in disease pathogenesis, with dysregulation of Myc expression in 50% of all human cancers. Still, targeting Myc remains a challenge due to the lack of small molecule binding pockets in the tertiary structure. Here, we report synthetic covalently linked TF mimetics that inhibit oncogenic Myc-driven transcription by antagonistic binding of the target DNA-binding site. We combined automated flow peptide chemistry with palladium(II) oxidative addition complexes (OACs) to engineer covalent protein dimers derived from the DNA-binding domains of Myc, Max, and Omomyc TF analogs. Palladium-mediated cross-coupling of synthesized protein monomers resulted in milligram quantities of seven different covalent homo- and heterodimers. The covalent helical dimers were found to bind DNA and exhibited improved thermal stability. Cell-based studies revealed the Max-Max covalent dimer is cell-penetrating and interfered with Myc-dependent gene transcription resulting in reduced cancer cell proliferation (EC50 of 6 µM in HeLa). RNA sequencing and gene analysis of extracted RNA from treated cancer cells confirmed that the covalent Max-Max homodimer interferes with Myc-dependent transcription. Flow chemistry, combined with palladium(II) OACs, has enabled a practical strategy to generate new bioactive compounds to inhibit tumor cell proliferation.
Assuntos
Indicadores e Reagentes/química , Paládio/química , Engenharia de Proteínas , Proteínas Proto-Oncogênicas c-myc/síntese química , Proliferação de Células/efeitos dos fármacos , DNA/química , Células HeLa , Humanos , Indicadores e Reagentes/farmacologia , Modelos Moleculares , Paládio/farmacologia , Multimerização Proteica , Proteínas Proto-Oncogênicas c-myc/química , Proteínas Proto-Oncogênicas c-myc/genéticaRESUMO
In organic synthesis, ligand-modified copper(I) hydride (CuH) complexes have become well-known reagents and catalysts for selective reduction, particularly toward Michael acceptors and carbonyl compounds. Recently, our group and others have found that these hydride complexes undergo migratory insertion (hydrocupration) with relatively unactivated and electronically unpolarized olefins, producing alkylcopper intermediates that can be leveraged to forge a variety of useful bonds. The resulting formal hydrofunctionalization reactions have formed the basis for a resurgence of research in CuH catalysis. This Account chronicles the development of this concept in our research group, highlighting its origin in the context of asymmetric hydroamination, evolution to more general C-X bond-forming reactions, and applications in the addition of olefin-derived nucleophiles to carbonyl derivatives.Hydroamination, the formal insertion of an olefin into the N-H bond of an amine, is a process of significant academic and industrial interest, due to its potential to transform widely available alkenes and alkynes into valuable complex amines. We developed a polarity-reversed strategy for catalytic enantioselective hydroamination relying on the reaction of olefins with CuH to generate chiral organocopper intermediates, which are intercepted by electrophilic amine reagents. By engineering the auxiliary ligand, amine electrophile, and reaction conditions, the scope of this method has since been extended to include many types of olefins, including challenging internal olefins. Further, the scope of amine reagents has been expanded to enable the synthesis of primary, secondary, and tertiary amines as well as amides, N-alkylated heterocycles, and anilines. All of these reactions exhibit high regio- and stereoselectivity and, due to the mild conditions required, excellent tolerance for heterocycles and polar functional groups.Though the generation of alkylcopper species from olefins was originally devised as a means to solve the hydroamination problem, we soon found that these intermediates could react efficiently with an unexpectedly broad range of electrophiles, including alkyl halides, silicon reagents, arylpalladium species, heterocycles, and carbonyl derivatives. The general ability of olefins to function as precursors for nucleophilic intermediates has proved particularly advantageous in carbonyl addition reactions because it overcomes many of the disadvantages associated with traditional organometallic reagents. By removing the need for pregeneration of the nucleophile in a separate operation, CuH-catalyzed addition reactions of olefin-derived nucleophiles feature improved step economy, enhanced functional group tolerance, and the potential for catalyst control over regio- and stereoselectivity. Following this paradigm, feedstock olefins such as allene, butadiene, and styrene have been employed as reagents for asymmetric alkylation of ketones, imines, and aldehydes.
Assuntos
Aldeídos/química , Alcenos/química , Cobre/química , Cetonas/química , Aminação , Catálise , Ligantes , EstereoisomerismoRESUMO
Contemporary organic chemists employ a broad range of catalytic and stoichiometric methods to construct molecules for applications in the material sciences, and as pharmaceuticals, agrochemicals, and sensors. The utility of a synthetic method may be greatly reduced if it relies on a glove box to enable the use of air- and moisture-sensitive reagents or catalysts. Furthermore, many synthetic chemistry laboratories have numerous containers of partially used reagents that have been spoiled by exposure to the ambient atmosphere. This is exceptionally wasteful from both an environmental and a cost perspective. Here we report an encapsulation method for stabilizing and storing air- and moisture-sensitive compounds. We demonstrate this approach in three contexts, by describing single-use capsules that contain all of the reagents (catalysts, ligands, and bases) necessary for the glove-box-free palladium-catalysed carbon-fluorine, carbon-nitrogen, and carbon-carbon bond-forming reactions. This strategy should reduce the number of error-prone, tedious and time-consuming weighing procedures required for such syntheses and should be applicable to a wide range of reagents, catalysts, and substrate combinations.