A new device for online nanoscale sampling and capillary electrophoresis analysis of plant sap composition.

In this work, an online sampling of plant xylem sap combined with an efficient (CE)-based method was developed and applied to study the kinetics of changes in the sap composition and to assess plant fitness under stress conditions comprehensively. A laboratory-built CE device was developed to provide online sampling and CE analysis of various ionogenic species in the sap during plant stress response. The rapid online sampling and short CE analysis time allow for real-time monitoring of changes in sap constituents in the living plant during the stress response. The developed device was successfully used to analyze chloride, nitrate, and sulfate ions in the plant xylem during the salt stress or stress caused by nitrate deficiency within short time scales.

Determination of nutrient concentration in liquid culture of cyanobacteria Nostoc sp. by capillary electrophoresis and inductively coupled plasma mass spectrometry.

In this work, we demonstrate the use of capillary electrophoresis and inductively coupled plasma mass spectrometry, as competitive methods primarily for ion chromatography, to determine changes in the concentration of small inorganic ions in the Nostoc sp. culture medium. Although macronutrients were analyzed by capillary electrophoresis with conductivity detection, micronutrients were analyzed by inductively coupled plasma mass spectrometry. The different light settings (light intensity and spectral composition) had a visible effect on the culture growth and depletion of calcium, magnesium, and phosphate ions, and iron and manganese elements when comparing the behavior under red or violet light with that under blue light.

Advantages of stereolithographic 3D printing in the fabrication of the Affiblot device for dot-blot assays.

In stereolithographic (SLA) 3D printing, objects are constructed by exposing layers of photocurable resin to UV light. It is a highly user-friendly fabrication method that opens a possibility for technology sharing through CAD file online libraries. Here, we present a prototyping procedure of a microfluidics-enhanced dot-blot device (Affiblot) designed for simple and inexpensive screening of affinity molecule characteristics (antibodies, oligonucleotides, cell receptors, etc.). The incorporation of microfluidic features makes sample processing user-friendly, less time-consuming, and less laborious, all performed completely on-device, distinguishing it from other dot-blot devices. Initially, the Affiblot device was fabricated using CNC machining, which required significant investment in manual post-processing and resulted in low reproducibility. Utilization of SLA 3D printing reduced the amount of manual post-processing, which significantly streamlined the prototyping process. Moreover, it enabled the fabrication of previously impossible features, including internal fluidic channels. While 3D printing of sub-millimeter microchannels usually requires custom-built printers, we were able to fabricate microfluidic features on a readily available commercial printer. Open microchannels in the size range 200-300 µm could be fabricated with reliable repeatability and sealed with a replaceable foil. Economic aspects of device fabrication are also discussed.

Microfluidic device integrating single-cell extraction and electrical lysis for mass spectrometry detection of intracellular compounds.

Analysis of cellular composition and metabolism at a single-cell resolution allows gaining more information about complex relationships of cells within tissues or whole living organisms by resolving the variance stemming from the cellular heterogeneity. Mass spectrometry (MS) is a perfect analytical tool satisfying the demanding requirements of detecting and identifying compounds present in such ultralow-volume samples of high chemical complexity. However, the method of sampling and sample ionization is crucial in obtaining relevant information. In this work, we present a microfluidic sampling platform that integrates single-cell extraction from MS-incompatible media with electrical cell lysis and nanoESI-MS analysis of human erythrocytes. Hemoglobin alpha and beta chains (300 amol/cell) were successfully identified in mass spectra of single-erythrocyte lysates.

Absolute Counting Method with Multiplexing Capability for Estimating the Number Concentration of Nanoparticles Using Anisotropically Collapsed Gels.

Number concentration─the number of nanoparticles in a given volume─is an important characteristic of any nanoparticle dispersion. However, its estimation for small nanoparticles (∼30 nm) is generally challenging. We introduce an absolute and widely applicable method for analyzing aqueous dispersions of nanoparticles. An innovative immobilization of nanomaterials in the anisotropically collapsed agarose gel is pioneered, followed by optical microscopy and nanoparticle counting. The number of counted nanoparticles is inherently coupled with sampled volume (517 pL) and translates to the number concentration. Photon-upconversion, fluorescence, bright-field, and dark-field microscopy techniques have been proven applicable and used for imaging lanthanide-doped photon-upconversion nanoparticles, their bioconjugates with antibodies, silica dye-doped fluorescent nanoparticles, quantum dots, and pure silica submicron particles. The precision and linearity were characterized by constructing a dilution series of photon-upconversion nanoparticles. The limit of detection was 2.0 × 106 mL-1, and the working range was from 4.4 × 107 to 2.2 × 1010 mL-1. The quantification of nanoparticle clusters was achieved by a thorough analysis of the micrographs. The accuracy was confirmed using gravimetric analysis and transmission electron microscopy as a reference. Multiplexed detection of two nanoparticle types in a mixed dispersion was feasibly demonstrated. The low thickness of the collapsed gel (<1 µm) supported extremely sensitive imaging. This was proven by imaging Tm3+-doped photon-upconversion nanoparticles (17 nm hydrodynamic diameter) with a nanoparticle emission rate of only ∼900 photons/s at a wavelength of 800 nm (excitation wavelength 976 nm).

Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review.

Capillary electrophoresis represents a promising technique in the field of pharmaceutical analysis. The presented review provides a summary of capillary electrophoretic methods suitable for routine quality control analyses of small molecule drugs published since 2015. In total, more than 80 discussed methods are sorted into three main sections according to the applied electroseparation modes (capillary zone electrophoresis, electrokinetic chromatography, and micellar, microemulsion, and liposome-electrokinetic chromatography) and further subsections according to the applied detection techniques (UV, capacitively coupled contactless conductivity detection, and mass spectrometry). Key parameters of the procedures are summarized in four concise tables. The presented applications cover analyses of active pharmaceutical ingredients and their related substances such as degradation products or enantiomeric impurities. The contribution of reported results to the current knowledge of separation science and general aspects of the practical applications of capillary electrophoretic methods are also discussed.

Application of capillary electrophoresis-nano-electrospray ionization-mass spectrometry for the determination of N-nitrosodimethylamine in pharmaceuticals.

After a presence of highly hepatotoxic and potentially carcinogenic N-nitrosodimethylamine was detected in certain lots of sartan, ranitidine, metformin, and other pharmaceuticals, local regulatory authorities issued recalls of suspected products, and concerns of the pharmacotherapy safety were widely discussed. Since then, testing of a representative sample of each produced lot of these pharmaceuticals is required as a part of quality control processes. Hence, an interface-free CE-nanoESI system coupled with MS detection was employed for the development of a simple and economical method for quantitative detection of this contaminant in the valsartan drug substances and finished formulations used as model matrices. In this arrangement, a fused-silica capillary was used as both a separation column and a nanoESI emitter providing high ionization efficiency and sensitivity. The optimized procedure was found to have sufficient selectivity, linearity, accuracy, and precision. The established LOD and LOQ values were 0.3 and 1.0 ng/mL, respectively. The practical applicability of the method was tested by analyses of commercially available Valsacor® tablets. The results obtained prove that the developed procedure represents a promising alternative to currently available GC- and LC-based methods. Furthermore, after an adjustment of the separation conditions, the CE-nanoESI/MS system can be conceptually used for the determination of NDMA in other suspected pharmaceuticals.

Electrospray: More than just an ionization source.

Electrospraying (ES) is a potential-driven process of liquid atomization, which is employed in the field of analytical chemistry, particularly as an ionization technique for mass spectrometric analyses of biomolecules. In this review, we demonstrate the extraordinary versatility of the electrospray by overviewing the specifics and advanced applications of ES-based processing of low molecular mass compounds, biomolecules, polymers, nanoparticles, and cells. Thus, under suitable experimental conditions, ES can be used as a powerful tool for highly controlled deposition of homogeneous films or various patterns, which may sometimes even be organized into 3D structures. We also emphasize its capacity to produce composite materials including encapsulation systems and polymeric fibers. Further, we present several other, less common ES-based applications. This review provides an insight into the remarkable potential of ES, which can be very useful in the designing of innovative and unique strategies.

Analysis of bicarbonate, phosphate and other anions in saliva by capillary electrophoresis with capacitively coupled contactless conductivity detection in diagnostics of gastroesophageal reflux disease.

Bicarbonate and phosphate constitute major salivary buffering components, and their importance consists in the neutralization of acidic gastric contents during reflux episodes. In this work, capillary electrophoresis with capacitively coupled contactless conductivity detector was applied for the analysis of bicarbonate, phosphate, and another inorganic (chloride, nitrite, nitrate, sulfate, thiocyanate) and organic anions (acetate, butyrate) to evaluate their levels in saliva. The background electrolytes of different composition and pH between 6.02-9.41 were assessed for the bicarbonate and phosphate determination by comparison of the real analyses of a model solution with the simulation by PeakMaster software. The optimized background electrolyte was composed of 10 mM 2-(N-morpholino)ethanesulfonic acid, 20 mM arginine, and 30 µM cetyltrimethylammonium bromide, pH 8.95. Using this BGE, the anion levels were compared in saliva from 20 patients suffering from gastroesophageal reflux disease (GERD) and saliva from 12 healthy subjects. Bicarbonate levels were significantly elevated in saliva from GERD patients suggesting the possible applicability of bicarbonate as a biomarker in non-invasive diagnostics of GERD by CE-C4 D.

Photon-upconversion barcode for monitoring an enzymatic reaction with a fluorescence reporter in droplet microfluidics.

We report luminescent photon-upconversion barcodes for indexing the chemical content of droplets. The barcode is compatible with the simultaneous detection of fluorescence. The encoding and decoding of the initial concentration of enzyme ß-galactosidase and substrate 4-methylumbelliferyl ß-d-galactopyranoside are described. The fluorescent product 4-methylumbelliferone is detected simultaneously with the barcode.

Application of capillary electrophoretic methods for the analysis of plant phloem and xylem saps composition: A review.

Plant vascular tissue is essential for the exchange of water, nutrients, metabolic products, and signals among distant organs in cormophytes. The compositions of phloem and xylem saps are highly dependent on many internal and external factors, and thus their analysis provides a valuable insight into plant physiology, growth, and development as well as nutrition status or presence of biotic or abiotic stresses. Capillary electrophoresis characterized by highly efficient separations and minuscule sample requirements represents a suitable analytical technique for this purpose because the sap constitutes a complex mixture with generally minimal availability. This review aims at providing a comprehensive overview of published capillary electrophoretic methods for the analysis of primary components present in the phloem and xylem saps of higher plants.

Photon-Upconversion Barcoding with Multiple Barcode Channels: Application for Droplet Microfluidics.

Barcoding facilitates high-throughput analytical methods in complex matrixes with a reduced volume of sample, reagents, time, and cost. Because of orthogonality to fluorescence, photon-upconversion barcodes attracted considerable attention in recent years. We constructed an epiluminescence detector, which, for the first time, demonstrated the reading of photon-upconversion spectra from microdroplets in a microfluidic chip with frequency up to 10 Hz. Non-negative least-squares deconvolution enabled the reading of an unprecedented number of photon-upconversion barcode channels (six) from emission spectra (excitation 980 nm, emission 430-875 nm). The standard deviation of barcode reading from microdroplets was ∼1%. Described barcoding can be, for example, used for multiparameter titrations, multiplexed biological and chemical assays, optimizations on a microfluidic platform, and preparation of barcoded concentration gradients and libraries.

Macrofluidic Device for Preparative Concentration Based on Epitachophoresis.

We have developed a new separation device to concentrate and collect ions from several milliliter sample volumes to microliter fractions. Unlike most conventional platforms, this device has circular architecture. The electrophoretic migration operates from the outer perimeter toward the center. Separations can be performed both in continuous (zone electrophoresis) and discontinuous (moving boundary) electrolyte systems. We use a discontinuous electrolyte system comprising a leading and a terminating electrolyte to concentrate samples containing small organic anions and DNA fragment. The agarose gel stabilizes the boundary between the leading and terminating electrolytes. The milliliter volume sample is mixed with the terminating electrolyte and migrates through the gel toward the center. The concentrated total sample is collected in microliter fraction at the center. The potential for preparative concentration of DNA is demonstrated using a DNA ladder. Because zone migration accelerates as it moves toward the center, we named this method Epitachophoresis from the Greek word "επιταχυνω (epitachýnο)", meaning "acceleration". To the best of our knowledge, this unique circular architecture has not been previously described.

Open source capillary electrophoresis.

Open source paradigm is becoming widely accepted in scientific communities and open source hardware is finding its steady place in chemistry research. In this review article, we provide the reader with the most up-to-date information on open source hardware and software resources enabling the construction and utilization of an "open source capillary electrophoresis instrument". While CE is still underused as a separation technique, it offers unique flexibility, low-cost, and high efficiency and is particularly suitable for open source instrumental development. We overview the major parts of CE instruments, such as high voltage power supplies, detectors, data acquisition systems, and CE software resources with emphasis on availability of the open source information on the web and in the scientific literature. This review is the first of its kind, revealing accessible blueprints of most parts from which a fully functional open source CE system can be built. By collecting the extensive information on open source capillary electrophoresis in this review article, the authors aim at facilitating the dissemination of knowledge on CE within and outside the scientific community, fosters innovation and inspire other researchers to improve the shared CE blueprints.

Microfabricated liquid junction hybrid capillary electrophoresis-mass spectrometry interface for fully automated operation.

One of the challenging instrumental aspects in coupling an automated CE instrument with ESI mass spectrometry (CE-MS) is finding the balance between the stability, reproducibility and sensitivity of the analysis and compatibility with the standard CE instrumentation. Here, we present a development of a new liquid junction based electrospray interface for automated CE-MS, with a focus on the technical design followed by computer modeling of transport conditions as well as characterization of basic performance of the interface. This hybrid arrangement designed as a microfabricated unit attachable to the automated CE instrument allows using of a wide range of separation capillaries with respect to their diameter, length or internal coating (e.g., for suppressed electroosmotic flow). Different compositions of the ESI liquid and background electrolyte solutions can be used if needed. The microfabricated part, prepared by laser machining from polyimide, includes a self-aligning liquid junction, a short transport channel, and a pointed sprayer for the electrospray ionization. This microfabricated part is positioned in a plastic connection block securing the separation capillary and flushing ports. Transport conditions were modelled using computer simulation and the real life performance of the interface was compared to that of a commercial sheath liquid interface. The basic performance of the interface was demonstrated by separations of peptides, proteins, and oligosaccharides.

Optimization of background electrolyte composition for simultaneous contactless conductivity and fluorescence detection in capillary electrophoresis of biological samples.

In this article, optimization of BGE for simultaneous separation of inorganic ions, organic acids, and glutathione using dual C4 D-LIF detection in capillary electrophoresis is presented. The optimized BGE consisted of 30 mM 2-[4-(2-hydroxyethyl)piperazin-1-yl]ethanesulfonic acid, 15 mM 2-amino-2-hydroxymethyl-propane-1,3-diol, and 2 mM 18-crown-6 at pH 7.2 and allowed simultaneous separation of ten inorganic anions and cations, three organic acids and glutathione in 20 min. The samples were injected hydrodynamically from both capillary ends using the double-opposite end injection principle. Sensitive detection of anions, cations, and organic acids with micromolar LODs using C4 D and simultaneously glutathione with nanomolar LODs using LIF was achieved in a single run. The developed BGE may be useful in analyses of biological samples containing analytes with differing concentrations of several orders of magnitude that is not possible with single detection mode.

Evaluation of Important Analytical Parameters of the Peptest Immunoassay that Limit its Use in Diagnosing Gastroesophageal Reflux Disease.

GOAL: To evaluate the analytical parameters of a lateral flow (LF) pepsin immunoassay (Peptest) and assess its suitability in the diagnostics of gastroesophageal reflux disease (GERD). BACKGROUND: Peptest is a noninvasive assay to analyze pepsin in saliva, intended for use in GERD diagnostics. Although commercialized, fundamental studies on its performance are missing. The assay therefore requires basic analytical parameter evaluation to assess its suitability in clinical practice. STUDY: Assay reaction's time dependence, reader device repeatability, and individual LF devices and longitudinal pepsin concentration reproducibility in individual subjects was evaluated. Salivary pepsin was analyzed in 32 GERD patients with extraesophageal reflux symptoms and 13 healthy individuals. RESULTS: The assay's signal increase is not completed at the recommend readout time and continues to increase for another 25 minutes. The relative standard deviation of measurement was good when using the same LF device, ranging from 2.3% to 12.9%, but the reproducibility of 10 different individual LF devices was poor. The random error when analyzing the same saliva sample on 10 LF devices was as high as 36 ng/mL and this value is thus suggested as the positivity cut-off. Pepsin concentration in individual subjects during a 10-day period varied significantly. The sensitivity of the Peptest was 36.8% in the group with acid reflux and 23.1% in the group with weakly acid reflux. The specificity was 61.5%. CONCLUSIONS: The Peptest assay's sensitivity and specificity is low, the results are highly variable and it should not be used as a near-patient diagnostic method in primary care.

Resistive pulse sensing as particle counting and sizing method in microfluidic systems: Designs and applications review.

Resistive pulse sensing is a well-known and established method for counting and sizing particles in ionic solutions. Throughout its development the technique has been expanded from detection of biological cells to counting nanoparticles and viruses, and even registering individual molecules, e.g., nucleotides in nucleic acids. This technique combined with microfluidic or nanofluidic systems shows great potential for various bioanalytical applications, which were hardly possible before microfabrication gained the present broad adoption. In this review, we provide a comprehensive overview of microfluidic designs along with electrode arrangements with emphasis on applications focusing on bioanalysis and analysis of single cells that were reported within the past five years.

Upconversion nanoparticle bioconjugates characterized by capillary electrophoresis.

Upconversion nanoparticles (UCNPs) are an emerging class of optical materials with high potential in bioimaging due to practically no background signal and high penetration depth. Their excellent optical properties and easy surface functionalization make them perfect for conjugation with targeting ligands. In this work, capillary electrophoretic (CE) method with laser-induced fluorescence detection was used to investigate the behavior of carboxyl-silica-coated UCNPs. Folic acid, targeting folate receptor overexpressed by wide variety of cancer cells, was used for illustrative purposes and assessed by CE under optimized conditions. Peptide-mediated bioconjugation of antibodies to UCNPs was also investigated. Despite the numerous advantages of CE, this is the first time that CE was employed for characterization of UCNPs and their bioconjugates. The separation conditions were optimized including the background electrolyte concentration and pH. The optimized electrolyte was 20 mM borate buffer with pH 8.

Recent progress in nucleic acids isotachophoresis.

Progress achieved between 2014-2017 in the extraction and sample preparation of nucleic acid by isotachophoresis is reviewed in this paper. The isolation and purification of nucleic acids is very often compromised by a complex matrix such as blood and other bodily fluids, samples from the scene of crime, fossil samples, etc. While most of the common nucleic acids isolation techniques are based on extraction with inherent limitations with regard to quantitative results, isotachophoretic focusing is a quantitative process with a theoretically unlimited concentration factor. Since isotachophoresis belongs to less traditional approaches of nucleic acids purification, we present not only the latest developments in the application of isotachophoresis for the nucleic acids concentration but also a brief description of the principles of this method.