Pitfalls in the analysis of phytocannabinoids in cannabis inflorescence.

The chemical analysis of cannabis potency involves the qualitative and quantitative determination of the main phytocannabinoids: Δ9-tetrahydrocannabinol (Δ9-THC), cannabidiol (CBD), cannabigerol (CBG), cannabichromene (CBC), etc. Although it might appear as a trivial analysis, it is rather a tricky task. Phytocannabinoids are present mostly as carboxylated species at the aromatic ring of the resorcinyl moiety. Their decarboxylation caused by heat leads to a greater analytical variability due to both reaction kinetics and possible decomposition. Moreover, the instability of cannabinoids and the variability in the sample preparation, extraction, and analysis, as well as the presence of isomeric forms of cannabinoids, complicates the scenario. A critical evaluation of the different analytical methods proposed in the literature points out that each of them has inherent limitations. The present review outlines all the possible pitfalls that can be encountered during the analysis of these compounds and aims to be a valuable help for the analytical chemist. Graphical abstract.

Isolation of a High-Affinity Cannabinoid for the Human CB1 Receptor from a Medicinal Cannabis sativa Variety: Δ9-Tetrahydrocannabutol, the Butyl Homologue of Δ9-Tetrahydrocannabinol.

The butyl homologues of Δ9-tetrahydrocannabinol, Δ9-tetrahydrocannabutol (Δ9-THCB), and cannabidiol, cannabidibutol (CBDB), were isolated from a medicinal Cannabis sativa variety (FM2) inflorescence. Appropriate spectroscopic and spectrometric characterization, including NMR, UV, IR, ECD, and HRMS, was carried out on both cannabinoids. The chemical structures and absolute configurations of the isolated cannabinoids were confirmed by comparison with the spectroscopic data of the respective compounds obtained by stereoselective synthesis. The butyl homologue of Δ9-THC, Δ9-THCB, showed an affinity for the human CB1 (Ki = 15 nM) and CB2 receptors (Ki = 51 nM) comparable to that of (-)-trans-Δ9-THC. Docking studies suggested the key bonds responsible for THC-like binding affinity for the CB1 receptor. The formalin test in vivo was performed on Δ9-THCB in order to reveal possible analgesic and anti-inflammatory properties. The tetrad test in mice showed a partial agonistic activity of Δ9-THCB toward the CB1 receptor.

Use of Polylactide-Co-Glycolide-Nanoparticles for Lysosomal Delivery of a Therapeutic Enzyme in Glycogenosis Type II Fibroblasts.

Glycogenosis type II, or Pompe Disease, is a lysosomal storage disease caused by the deficiency of acid alpha-glucosidase (GAA), leading to glycogen accumulation in muscles. A recombinant human GAA (rhGAA, Myozyme®) is currently used for enzyme replacement therapy. Despite its efficacy in most of patients, some of them show a diminished response to the treatment with rapidly progressive clinical deterioration, due to immuno-mediated enzyme inactivation. To demonstrate that Nanoparticles (NPs) could be profitably exploited to carry macromolecules, PLGA NPs loaded with rhGAA (GAA-NPs) were prepared by double emulsion solvent evaporation. Their surface morphology, particle size, zeta-potential and biochemical activity were assessed. "Pulse and chase" experiments were made by administrating GAA-NPs on patients' fibroblasts. Biochemical activity tests showed a more efficient cellular uptake of rhGAA loaded to NPs and a more significant stability of the enzyme (up to 7 days) in vitro, if compared to the same amount of rhGAA free enzyme. This data allows to envision in vivo experiments, in significant animal models, to further characterize lysosomal enzyme loaded-NPs' efficacy and toxicity.

Functionalization of liposomes: microscopical methods for preformulative screening.

The development of smart delivery systems able to deliver and target a drug to the site of action is one of the major challenges in the field of pharmaceutical technology. The surface modification of nanocarriers, such as liposomes, is widely investigated either for increasing the blood circulation time (by pegylation) or for interacting with specific tissues or cells (by conjugation of a selective ligand as a monoclonal antibody, mAb). Microscopical analysis thereby is a useful approach to evaluate the morphology and the size owing to resolution and versatility in defining either surface modification or the architecture and the internal structure of liposomes. This contribution aims to connect the outputs obtained by transmission electron (TEM) and atomic force (AFM) microscopical techniques for identifying the modifications on the liposomal surface. To reach this objective, we prepared liposomes applying two different pegylation technologies and further modifying the surface by mAb conjugation. This work demonstrates the feasibility to apply the combined approach (TEM and AFM analysis) in the evaluation of the efficacy of a surface engineering process.

Origin of Δ9-Tetrahydrocannabinol Impurity in Synthetic Cannabidiol.

Introduction: Cannabidiol (CBD), the nonintoxicating constituent of cannabis, is largely employed for pharmaceutical and cosmetic purposes. CBD can be extracted from the plant or chemically synthesized. Impurities of psychotropic cannabinoids Δ9-tetrahydrocannabinol (Δ9-THC) and Δ8-THC have been found in extracted CBD, thus hypothesizing a possible contamination from the plant. Materials and Methods: In this study, synthetic and extracted CBD samples were analyzed by ultrahigh-performance liquid chromatography coupled to high-resolution mass spectrometry and the parameters that can be responsible of the conversion of CBD into THC were evaluated by an accelerated stability test. Results: In synthetic and extracted CBD no trace of THC species was detected. In contrast, CBD samples stored in the dark at room temperature on the benchtop for 3 months showed the presence of such impurities. Experiments carried out under inert atmosphere in the absence of humidity or carbon dioxide led to no trace of THC over time even at high temperature. Conclusions: The results suggested that the copresence of carbon dioxide and water from the air could be the key for creating the acidic environment responsible for the cyclization of CBD. These findings suggest that it might be appropriate to review the storage conditions indicated on the label of commercially available CBD.

Insights into kinetics, release, and behavioral effects of brain-targeted hybrid nanoparticles for cholesterol delivery in Huntington's disease.

Supplementing brain cholesterol is emerging as a potential treatment for Huntington's disease (HD), a genetic neurodegenerative disorder characterized, among other abnormalities, by inefficient brain cholesterol biosynthesis. However, delivering cholesterol to the brain is challenging due to the blood-brain barrier (BBB), which prevents it from reaching the striatum, especially, with therapeutically relevant doses. Here we describe the distribution, kinetics, release, and safety of novel hybrid polymeric nanoparticles made of PLGA and cholesterol which were modified with an heptapeptide (g7) for BBB transit (hybrid-g7-NPs-chol). We show that these NPs rapidly reach the brain and target neural cells. Moreover, deuterium-labeled cholesterol from hybrid-g7-NPs-chol is released in a controlled manner within the brain and accumulates over time, while being rapidly removed from peripheral tissues and plasma. We confirm that systemic and repeated injections of the new hybrid-g7-NPs-chol enhanced endogenous cholesterol biosynthesis, prevented cognitive decline, and ameliorated motor defects in HD animals, without any inflammatory reaction. In summary, this study provides insights about the benefits and safety of cholesterol delivery through advanced brain-permeable nanoparticles for HD treatment.

Synthesis, Characterization, and In Vitro Studies of an Reactive Oxygen Species (ROS)-Responsive Methoxy Polyethylene Glycol-Thioketal-Melphalan Prodrug for Glioblastoma Treatment.

Glioblastoma (GBM) is the most frequent and aggressive primary tumor of the brain and averages a life expectancy in diagnosed patients of only 15 months. Hence, more effective therapies against this malignancy are urgently needed. Several diseases, including cancer, are featured by high levels of reactive oxygen species (ROS), which are possible GBM hallmarks to target or benefit from. Therefore, the covalent linkage of drugs to ROS-responsive molecules can be exploited aiming for a selective drug release within relevant pathological environments. In this work, we designed a new ROS-responsive prodrug by using Melphalan (MPH) covalently coupled with methoxy polyethylene glycol (mPEG) through a ROS-cleavable group thioketal (TK), demonstrating the capacity to self-assembly into nanosized micelles. Full chemical-physical characterization was conducted on the polymeric-prodrug and proper controls, along with in vitro cytotoxicity assayed on different GBM cell lines and "healthy" astrocyte cells confirming the absence of any cytotoxicity of the prodrug on healthy cells (i.e. astrocytes). These results were compared with the non-ROS responsive counterpart, underlining the anti-tumoral activity of ROS-responsive compared to the non-ROS-responsive prodrug on GBM cells expressing high levels of ROS. On the other hand, the combination treatment with this ROS-responsive prodrug and X-ray irradiation on human GBM cells resulted in an increase of the antitumoral effect, and this might be connected to radiotherapy. Hence, these results represent a starting point for a rationale design of innovative and tailored ROS-responsive prodrugs to be used in GBM therapy and in combination with radiotherapy.

Identification of a new cannabidiol n-hexyl homolog in a medicinal cannabis variety with an antinociceptive activity in mice: cannabidihexol.

The two most important and studied phytocannabinoids present in Cannabis sativa L. are undoubtedly cannabidiol (CBD), a non-psychotropic compound, but with other pharmacological properties, and Δ9-tetrahydrocannabinol (Δ9-THC), which instead possesses psychotropic activity and is responsible for the recreative use of hemp. Recently, the homolog series of both CBDs and THCs has been expanded by the isolation in a medicinal cannabis variety of four new phytocannabinoids possessing on the resorcinyl moiety a butyl-(in CBDB and Δ9-THCB) and a heptyl-(in CBDP and Δ9-THCP) aliphatic chain. In this work we report a new series of phytocannabinoids that fills the gap between the pentyl and heptyl homologs of CBD and Δ9-THC, bearing a n-hexyl side chain on the resorcinyl moiety that we named cannabidihexol (CBDH) and Δ9-tetrahydrocannabihexol (Δ9-THCH), respectively. However, some cannabinoids with the same molecular formula and molecular weight of CBDH and Δ9-THCH have been already identified and reported as monomethyl ether derivatives of the canonical phytocannabinoids, namely cannabigerol monomethyl ether (CBGM), cannabidiol monomethyl ether (CBDM) and Δ9-tetrahydrocannabinol monomethyl ether (Δ9-THCM). The unambiguously identification in cannabis extract of the n-hexyl homologues of CBD and Δ9-THC different from the corresponding methylated isomers (CBDM, CBGM and Δ9-THCM) was achieved by comparison of the retention time, molecular ion, and fragmentation spectra with those of the authentic standards obtained via stereoselective synthesis, and a semi-quantification of these cannabinoids in the FM2 medical cannabis variety was provided. Conversely, no trace of Δ9-THCM was detected. Moreover, CBDH was isolated by semipreparative HPLC and its identity was confirmed by comparison with the spectroscopic data of the corresponding synthetic standard. Thus, the proper recognition of CBDH, CBDM and Δ9-THCH closes the loop and might serve in the future for researchers to distinguish between these phytocannabinoids isomers that show a very similar analytical behaviour. Lastly, CBDH was assessed for biological tests in vivo showing interesting analgesic activity at low doses in mice.

Investigating Novel Syntheses of a Series of Unique Hybrid PLGA-Chitosan Polymers for Potential Therapeutic Delivery Applications.

Discovering new materials to aid in the therapeutic delivery of drugs is in high demand. PLGA, a FDA approved polymer, is well known in the literature to form films or nanoparticles that can load, protect, and deliver drug molecules; however, its incompatibility with certain drugs (due to hydrophilicity or charge repulsion interactions) limits its use. Combining PLGA or other polymers such as polycaprolactone with other safe and positively-charged molecules, such as chitosan, has been sought after to make hybrid systems that are more flexible in terms of loading ability, but often the reactions for polymer coupling use harsh conditions, films, unpurified products, or create a single unoptimized product. In this work, we aimed to investigate possible innovative improvements regarding two synthetic procedures. Two methods were attempted and analytically compared using nuclear magnetic resonance (NMR), fourier-transform infrared spectroscopy (FT-IR), and dynamic scanning calorimetry (DSC) to furnish pure, homogenous, and tunable PLGA-chitosan hybrid polymers. These were fully characterized by analytical methods. A series of hybrids was produced that could be used to increase the suitability of PLGA with previously non-compatible drug molecules.

PLGA-PEG-ANG-2 Nanoparticles for Blood-Brain Barrier Crossing: Proof-of-Concept Study.

The treatment of diseases that affect the central nervous system (CNS) represents a great research challenge due to the restriction imposed by the blood-brain barrier (BBB) to allow the passage of drugs into the brain. However, the use of modified nanomedicines engineered with different ligands that can be recognized by receptors expressed in the BBB offers a favorable alternative for this purpose. In this work, a BBB-penetrating peptide, angiopep-2 (Ang-2), was conjugated to poly(lactic-co-glycolic acid) (PLGA)-based nanoparticles through pre- and post-formulation strategies. Then, their ability to cross the BBB was qualitatively assessed on an animal model. Proof-of-concept studies with fluorescent and confocal microscopy studies highlighted that the brain-targeted PLGA nanoparticles were able to cross the BBB and accumulated in neuronal cells, thus showing a promising brain drug delivery system.

AFM phase imaging of soft-hydrated samples: a versatile tool to complete the chemical-physical study of liposomes.

Despite of the several approaches applied to the physicochemical characterization of liposomes, few techniques are really useful to obtain information about the surface properties of these colloidal drug-delivery systems. In this paper, we demonstrate a possible new application of tapping mode atomic force microscopy (AFM) to discriminate between conventional and pegylated liposomes. We showed that the differences on liposomal surface properties revealed by the phase images AFM approach well correlate with the data obtained using classical methods, such as light scattering, hydrodynamic, and nuclear magnetic resonance analysis.

Flow cytometry and live confocal analysis for the evaluation of the uptake and intracellular distribution of FITC-ODN into HaCaT cells.

In this study, the mechanism of the internalization and the cellular distribution of 59 fluorescein conjugated PS-ODN (FITC-ODN) after transfection with different mixed lipidic vesicles/oligo complexes (lipoplexes) have been investigated. Mixed lipidic vesicles were prepared with one of the most used cationic lipid (DOTAP) and different amounts of a cholic acid (UDCA) to release the oligo into HaCaT cells. Using flow cytometry, the cellular uptake of the oligo was studied with and without different inhibitors able to block selectively the different pathways involved in the internalization mechanism. The intracellular distribution of the oligo was analyzed by confocal laser scanning microscopy (CLSM), treating the cells with the lipoplexes and directly observing without any fixing procedure. To better carry out the colocalization studies, fluorescent-labeled markers, specific for the different cellular compartments, were coincubated with 59 fluorescein-conjugated 29-mer phosphorotioate oligonucleotide (FITC-ODN). The different lipidic vesicles affect the internalization mechanism of FITC-ODN. After using the inhibitors, the uptake of complexes involved a different internalization mechanism. The live CLSM analysis demonstrated that, after 1 hour from the complex incubation, the oligo was transferred into cells and localized into the endosomes; after 24 hours, the oligo was intracellularly localized close to the nuclear structure in a punctuate pattern. However, the results from fusion experiments showed also a binding of a quite low amount of oligo with the cell membranes.

Chemical and spectroscopic characterization data of 'cannabidibutol', a novel cannabidiol butyl analog.

Cannabidibutol (CBDB), a novel butyl analog of cannabidiol, was identified as impurity of commercial cannabidiol (CBD) extracted from hemp (for full data and results interpretation see "Analysis of impurities of cannabidiol from hemp. Isolation, characterization and synthesis of cannabidibutol, the novel cannabidiol butyl analog" Citti et al, 2019). The compound was isolated from a CBD sample and subject to a full characterization. First, a complete spectroscopic characterization was performed by Nuclear Magnetic Resonance (NMR): in particular, 1H-NMR, 13C-NMR, COSY, HSQC and HMBC, which were followed by UV absorption and circular dichroism (CD) spectra. In order to confirm the structural identity and stereochemistry of the compound, a stereoselective synthesis of the trans isomer (1R,6R) was carried out and all the chemical and spectroscopic properties were analyzed. The synthesized compound was characterized by NMR (1H-NMR, 13C-NMR, COSY, HSQC and HMBC), Infra-Red spectroscopy (IR), UV and CD absorption, matching the results obtained for the natural isolated compound. With the analytical standard in hand, a simple high-performance liquid chromatography method coupled to UV detection (HPLC-UV) was developed and validated in house in terms of linearity, accuracy, precision, dilution integrity and stability. The present data might be useful to any researcher or industry that may run into a very common impurity of CBD extracted from hemp, so it can be easily compared with their own experimental data.

Analysis of impurities of cannabidiol from hemp. Isolation, characterization and synthesis of cannabidibutol, the novel cannabidiol butyl analog.

Cannabidiol (CBD), one of the two major active principles present in Cannabis sativa, is gaining great interest among the scientific community for its pharmaceutical, nutraceutical and cosmetic applications. CBD can be prepared either by chemical synthesis or extraction from Cannabis sativa (hemp). The latter is more convenient from several points of view, including environmental and economic, but mainly for the absence of harmful organic solvents generally employed in the chemical synthesis. Although CBD produced by hemp extraction is the most widely employed, it carries two major impurities. The first one is the already known cannabidivarin (CBDV), whereas the second one is supposed to be the butyl analog of CBD with a four-term alkyl side chain. In this work, we report the isolation by semi-preparative liquid chromatography and the unambiguous identification of this second impurity. A comprehensive spectroscopic characterization, including NMR, UV, IR, circular dichroism and high-resolution mass spectrometry (HRMS), was carried out on this natural cannabinoid. In order to confirm its absolute configuration and chemical structure, the stereoisomer (1R,6R) of the supposed cannabinoid was synthesized and the physicochemical and spectroscopic properties, along with the stereochemistry, matched those of the natural isolated molecule. According to the International Nonproprietary Name, we suggested the name of cannabidibutol (CBDB) for this cannabinoid. Lastly, an HPLC-UV method was developed and validated for the qualitative and quantitative determination of CBDV and CBDB in samples of CBD extracted from hemp and produced according to Good Manufacturing Practices regulations for pharmaceutical and cosmetic use.

Cannabinoid Profiling of Hemp Seed Oil by Liquid Chromatography Coupled to High-Resolution Mass Spectrometry.

Hemp seed oil is well known for its nutraceutical, cosmetic and pharmaceutical properties due to a perfectly balanced content of omega 3 and omega 6 polyunsaturated fatty acids. Its importance for human health is reflected by the success on the market of organic goods in recent years. However, it is of utmost importance to consider that its healthy properties are strictly related to its chemical composition, which varies depending not only on the manufacturing method, but also on the hemp variety employed. In the present work, we analyzed the chemical profile of ten commercially available organic hemp seed oils. Their cannabinoid profile was evaluated by a liquid chromatography method coupled to high-resolution mass spectrometry. Besides tetrahydrocannabinol and cannabidiol, other 30 cannabinoids were identified for the first time in hemp seed oil. The results obtained were processed according to an untargeted metabolomics approach. The multivariate statistical analysis showed highly significant differences in the chemical composition and, in particular, in the cannabinoid content of the hemp oils under investigation.

Nanomedicine in Alzheimer's disease: Amyloid beta targeting strategy.

The treatment of Alzheimer's disease (AD) is up to today one of the most unsuccessful examples of biomedical science. Despite the high number of literature evidences detailing the multifactorial and complex etiopathology of AD, no cure is yet present on the market and the available treatments are only symptomatic. The reasons could be ascribed on two main factors: (i) lack of ability of the majority of drugs to cross the blood-brain barrier (BBB), thus excluding the brain for any successful therapy; (ii) lack of selectivity and specificity of drugs, decreasing the efficacy of even potent anti-AD drugs. The exploitation of specifically engineered nanomedicines planned to cross the BBB and to target the most "hot" site of action (i.e., ß-amyloid) is one of the most interesting innovations in drug delivery and could reasonably represent an promising choice for possible treatments and even early-diagnosis of AD. In this chapter, we therefore outline the most talented approaches in AD treatment with a specific focus on the main advantages/drawbacks and future possible translation to clinic application.

ROS-responsive "smart" polymeric conjugate: Synthesis, characterization and proof-of-concept study.

New approaches integrating stimuli-responsive linkers into prodrugs are currently emerging. These "smart" prodrugs can enhance the effectivity of conventional prodrugs with promising clinical applicability. Oxidative stress is central to several diseases, including cancer. Therefore, the design of prodrugs that respond to ROS stimulus, allowing a selective drug release in this condition, is fairly encouraging. Aiming to investigate the ROS-responsiveness of prodrugs containing the ROS-cleavable moiety, Thioketal (TK), we performed proof-of-concept studies by synthesizing ROS-responsive conjugate, namely mPEG-TK-Cy5, through exploiting Cy5 fluorescent dye. We demonstrated that, differently to non-ROS-responsive control conjugate (mPEG-Cy5), mPEG-TK-Cy5 shows a selective release of Cy5 in response to ROS in both, ROS-simulated conditions and in vitro on glioblastoma cells. Our results confirm the applicability of TK-technology in the design of ROS-responsive prodrugs, which constitutes a promising approach in cancer treatment. The translatability of this technology for other diseases treatment makes this a highly relevant and promising approach.

A novel phytocannabinoid isolated from Cannabis sativa L. with an in vivo cannabimimetic activity higher than Δ9-tetrahydrocannabinol: Δ9-Tetrahydrocannabiphorol.

(-)-Trans-Δ9-tetrahydrocannabinol (Δ9-THC) is the main compound responsible for the intoxicant activity of Cannabis sativa L. The length of the side alkyl chain influences the biological activity of this cannabinoid. In particular, synthetic analogues of Δ9-THC with a longer side chain have shown cannabimimetic properties far higher than Δ9-THC itself. In the attempt to define the phytocannabinoids profile that characterizes a medicinal cannabis variety, a new phytocannabinoid with the same structure of Δ9-THC but with a seven-term alkyl side chain was identified. The natural compound was isolated and fully characterized and its stereochemical configuration was assigned by match with the same compound obtained by a stereoselective synthesis. This new phytocannabinoid has been called (-)-trans-Δ9-tetrahydrocannabiphorol (Δ9-THCP). Along with Δ9-THCP, the corresponding cannabidiol (CBD) homolog with seven-term side alkyl chain (CBDP) was also isolated and unambiguously identified by match with its synthetic counterpart. The binding activity of Δ9-THCP against human CB1 receptor in vitro (Ki = 1.2 nM) resulted similar to that of CP55940 (Ki = 0.9 nM), a potent full CB1 agonist. In the cannabinoid tetrad pharmacological test, Δ9-THCP induced hypomotility, analgesia, catalepsy and decreased rectal temperature indicating a THC-like cannabimimetic activity. The presence of this new phytocannabinoid could account for the pharmacological properties of some cannabis varieties difficult to explain by the presence of the sole Δ9-THC.

Polymeric nanoparticles for the drug delivery to the central nervous system.

BACKGROUND: Nanoparticulate polymeric systems (nanoparticles [Np]) have been widely studied for the delivery of drugs to a specific target site. This approach has been recently considered for the therapy of brain diseases. The major problem in accessing the CNS is linked to the presence of the blood-brain barrier. OBJECTIVE: The present review deals with the different strategies that have been developed in order to allow Np drug carriers entry into the CNS parenchyma. Among these, the use of magnetic Np, Np conjugation with ligands for blood-brain barrier receptors, with antibodies, and the use of surfactants have been considered. METHODS: All the literature available is reviewed in order to highlight the potential of this drug delivery system to be used as a drug carrier for the treatment of CNS pathologies. CONCLUSIONS: Polymeric Np have been shown to be promising carriers for CNS drug delivery due to their potential both in encapsulating drugs, hence protecting them from excretion and metabolism, and in delivering active agents across the blood-brain barrier without inflicting any damage to the barrier. Different polymers have been used and different strategies have been applied; among these, the use of specific ligands to enhance the specificity of drugs delivered to the CNS has recently been considered. At present, clinical trials are being conducted appeared for the use of these drug carriers but none related to the treatment of CNS diseases.