Star-pseudopolyrotaxane organized in nanoplatelets for poly(ε-caprolactone)-based nanofibrous scaffolds with enhanced surface reactivity.

Herein, it is demonstrated that star pseudopolyrotaxanes (star-pPRs) obtained from the inclusion complexation of α-cyclodextrin (CD) and four-branched star poly(ε-caprolactone) (star-PCL) organize into nanoplatelets in dimethyl sulfoxide at 35 °C. This peculiar property, not observed for linear pseudopolyrotaxanes, allows the processing of star-pPRs while preserving their supramolecular assembly. Thus, original PCL:star-pPR core:shell nanofibers are elaborated by coaxial electrospinning. The star-pPR shell ensures the presence of available CD hydroxyl functions on the fiber surface allowing its postfunctionalization. As proof of concept, fluorescein isothiocyanate is grafted. Moreover, the morphology of the fibers is maintained due to the star-pPR shell that acts as a shield, preventing the fiber dissolution during chemical modification. The proposed strategy is simple and avoids the synthesis of polyrotaxanes, i.e., pPR end-capping to prevent the CD dethreading. As PCL is widely used for biomedical applications, this strategy paves the way for simple functionalization with any bioactive molecules.

Differentiation of human adipose-derived stem cells seeded on mineralized electrospun co-axial poly(ε-caprolactone) (PCL)/gelatin nanofibers.

Mineralized poly(ε-caprolactone)/gelatin core-shell nanofibers were prepared via co-axial electrospinning and subsequent incubation in biomimetic simulated body fluid containing ten times the calcium and phosphate ion concentrations found in human blood plasma. The deposition of calcium phosphate on the nanofiber surfaces was investigated through scanning electronic microscopy and X-ray diffraction. Energy dispersive spectroscopy results indicated that calcium-deficient hydroxyapatite had grown on the fibers. Fourier transform infrared spectroscopy analysis suggested the presence of hydroxyl-carbonate-apatite. The results of a viability assay (MTT) and alkaline phosphatase activity analysis suggested that these mineralized matrices promote osteogenic differentiation of human adipose-derived stem cells (hASCs) when cultured in an osteogenic medium and have the potential to be used as a scaffold in bone tissue engineering. hASCs cultured in the presence of nanofibers in endothelial differentiation medium showed lower rates of proliferation than cells cultured without the nanofibers. However, endothelial cell markers were detected in cells cultured in the presence of nanofibers in endothelial differentiation medium.

Comparison of hydroxyapatite and honeycomb micro-structure in bone tissue engineering using electrospun beads-on-string fibers.

Thick honeycomb-like electrospun scaffold with nanoparticles of hydroxyapatite (nHA) recently demonstrated its potential to promote proliferation and differentiation of a murine embryonic cell line (C3H10T1/2) to osteoblasts. In order to distinguish the respective effects of the structure and the composition on cell differentiation, beads-on-string fibers were used to manufacture thick honeycomb-like scaffolds without nHA. Mechanical and biological impacts of those beads-on string fibers were evaluated. Uniaxial tensile test showed that beads-on-string fibers decreased the Young Modulus and maximal stress but kept them appropriate for tissue engineering. C3H10T1/2 were seeded and cultured for 6 days on the scaffolds without any growth factors. Viability assays revealed the biocompatibility of the beads-on-string scaffolds, with adequate cells-materials interactions observed by confocal microscopy. Alkaline phosphatase staining was performed at day 6 in order to compare the early differentiation of cells to bone fate. The measure of stained area and intensity confirmed the beneficial effect of both honeycomb structure and nHA, independently. Finally, we showed that honeycomb-like electrospun scaffolds could be relevant candidates for promoting bone fate to cells in the absence of nHA. It offers an easier and faster manufacture process, in particular in bone-interface tissue engineering, permitting to avoid the dispersion of nHA and their interaction with the other cells.

Polymer-free cyclodextrin and natural polymer-cyclodextrin electrospun nanofibers: A comprehensive review on current applications and future perspectives.

The present review discusses the use of cyclodextrins and their derivatives to prepare electrospun nanofibers with specific features. Cyclodextrins, owing to their unique capability to form inclusion complexes with hydrophobic and volatile molecules, can indeed facilitate the encapsulation of bioactive compounds in electrospun nanofibers allowing fast-dissolving products for food, biomedical, and pharmaceutical purposes, filtering materials for wastewater and air purification, as well as a variety of other technological applications. Additionally, cyclodextrins can improve the processability of naturally occurring biopolymers helping the fabrication of "green" materials with a strong industrial relevance. Hence, this review provides a comprehensive state-of-the-art of different cyclodextrins-based nanofibers including those made of pure cyclodextrins, of polycyclodextrins, and those made of natural biopolymer functionalized with cyclodextrins. To this end, the advantages and disadvantages of such approaches and their possible applications are investigated along with the current limitations in the exploitation of electrospinning at the industrial level.

Highly Structured 3D Electrospun Conical Scaffold: A Tool for Dental Pulp Regeneration.

New procedures envisioned for dental pulp regeneration after pulpectomy include cell homing strategy. It involves host endogenous stem cell recruitment and activation. To meet this cell-free approach, we need to design a relevant scaffold to support cell migration from tissues surrounding the dental root canal. A composite membrane made of electrospun poly(lactic acid) nanofibers and electrosprayed polycaprolactone with tannic acid (TA) microparticles which mimics the architecture of the extracellular matrix was first fabricated. After rolling the membrane in the form of a 3D conical scaffold and subsequently coating it with gelatin, it can be directly inserted into the root canal. The porous morphology of the construct was characterized by SEM at different length scales. It was shown that TA was released from the 3D conical scaffold after 2 days in PBS at 37 °C. Biocompatibility studies were first assessed by seeding human dental pulp stem cells (DPSCs) on planar membranes coated or not coated with gelatin to compare the surfaces. After 24 h, the results highlighted that the gelatin-coating increased the membrane biocompatibility and cell viability. Similar DPSC morphology and proliferation on both membrane surfaces were observed. The culture of DPSCs on conical scaffolds showed cell colonization in the whole cone volume, proving that the architecture of the conical scaffold was suitable for cell migration.

Suturable elastomeric tubular grafts with patterned porosity for rapid vascularization of 3D constructs.

Vascularization is considered to be one of the key challenges in engineering functional 3D tissues. Engineering suturable vascular grafts containing pores with diameter of several tens of microns in tissue engineered constructs may provide an instantaneous blood perfusion through the grafts improving cell infiltration and thus, allowing rapid vascularization and vascular branching. The aim of this work was to develop suturable tubular scaffolds to be integrated in biofabricated constructs, enabling the direct connection of the biofabricated construct with the host blood stream, providing an immediate blood flow inside the construct. Here, tubular grafts with customizable shapes (tubes, Y-shape capillaries) and controlled diameter ranging from several hundreds of microns to few mm are fabricated based on poly(glycerol sebacate) (PGS)/poly(vinyl alcohol) (PVA) electrospun scaffolds. Furthermore, a network of pore channels of diameter in the order of 100µm was machined by laser femtosecond ablation in the tube wall. Both non-machined and laser machined tubular scaffolds elongated more than 100% of their original size have shown suture retention, being 5.85 and 3.96 N mm-2respectively. To demonstrate the potential of application, the laser machined porous grafts were embedded in gelatin methacryloyl (GelMA) hydrogels, resulting in elastomeric porous tubular graft/GelMA 3D constructs. These constructs were then co-seeded with osteoblast-like cells (MG-63) at the external side of the graft and human umbilical vein endothelial cells inside, forming a bone osteon model. The laser machined pore network allowed an immediate endothelial cell flow towards the osteoblasts enabling the osteoblasts and endothelial cells to interact and form 3D structures. This rapid vascularization approach could be applied, not only for bone tissue regeneration, but also for a variety of tissues and organs.

Design of Functional Electrospun Scaffolds Based on Poly(glycerol sebacate) Elastomer and Poly(lactic acid) for Cardiac Tissue Engineering.

Many works focus on the use of polyesters such as poly(lactic acid) (PLA) to produce nanofibrous scaffolds for cardiac tissue engineering. However, such scaffolds are hydrophobic and difficult to functionalize. Here, we show that adding 30% of poly(glycerol sebacate) (PGS) elastomer within PLA leads to PLA:PGS scaffolds with improved biological properties, depending on the processing parameters. Two categories of fibers were produced by blend electrospinning, with diameters of 600 and 1300 nm. The resulting fibers were cured at 90 or 120 °C to achieve two different cross-linking densities. The designed scaffolds were considered for cytocompatibility, biocompatibility, biodegradability, and chemical and mechanical properties. Our results demonstrated that the presence of PGS increases the hydrophilicity of the material and thus improves surface functionalization by Matrigel or laminin coating, commonly used cell culture matrices. PLA:PGS scaffolds associated with Matrigel or laminin allow an increased material-cell interaction. Moreover, the cardiomyocytes seeded on such scaffolds acquire a morphology similar to that observed in native tissue, the result being more remarkable on fibers having the smallest diameter and the highest PGS cross-linking density. In addition, these scaffolds induce neovascularization without an inflammatory response and foreign body giant cell response after grafting on a mouse heart. Hence, the improved biocompatibility and the ability to support cardiomyocyte development suggest that thin PLA:PGS scaffolds could be promising biomaterials for cardiac application.

The combination of a poly-caprolactone/nano-hydroxyapatite honeycomb scaffold and mesenchymal stem cells promotes bone regeneration in rat calvarial defects.

Bone tissue engineering goes beyond the limitations of conventional methods of treating bone loss, such as autograft-induced morbidity and a lack of integration for large grafts. Novel biomimicry approaches (using three-dimensional [3D] electrospinning and printing techniques) have been designed to offer the most appropriate environment for cells and thus promote bone regeneration. In the present study, we assessed the bone regeneration properties of a composite 3D honeycomb structure from the electrostatic template-assisted deposition process by an alternate deposition of electrospun polycaprolactone (PCL) nanofibers and electrosprayed hydroxyapatite nanoparticles (nHA) on a honeycomb micropatterned substrate. We first confirmed the cytocompatibility of this honeycomb PCL-nHA scaffold in culture with bone marrow-derived mesenchymal stem cells (BM-MSCs). The scaffold was then implanted (alone or with seeded MSCs) for 2 months in a rat critical-sized calvarial defect model. The observation of new bone synthesis in situ (monitored using microcomputed tomography every 2 weeks and a histological assessment upon extraction) demonstrated that the honeycomb PCL-nHA scaffold was osteoconductive. Moreover, the combination of the scaffold with BM-MSCs was associated with significantly greater bone volume and mineralized regeneration during the 2-month experiment. The combination of the biomimetic honeycomb PCL-nHA scaffold with patient mesenchymal stem cells might therefore have great potential for clinical applications and specifically in maxillofacial surgery.

Electrospinning in water and in situ crosslinking of hyaluronic acid / cyclodextrin nanofibers: Towards wound dressing with controlled drug release.

Hyaluronic acid (HA) is widely investigated due to its high potential for wound dressing applications. The fabrication of biomimetic HA-based scaffolds by electrospinning is thus extensively studied. However, HA is often dissolved in toxic organic solvents to allow the efficient production of electrospun nanofibers. Indeed, although HA is soluble in water, its ionic nature leading to long-range electrostatic interactions and the presence of counter ions induce a dramatic increase of the viscosity of aqueous HA solutions without insuring enough chain entanglements necessary for a stable and efficient electrospinning. In this study, biocompatible insoluble HA-based nanofibers were fabricated by electrospinning in pure water. To this end, poly(vinyl alcohol) (PVA) was added as a carrier polymer and it was found that the addition of hydroxypropyl-ßcyclodextrin (HPßCD) stabilized the process of electrospinning and led to the efficient formation of uniform nanofibrous scaffolds. An in situ crosslinking process of the scaffolds is also proposed, insuring a whole fabrication process without any toxicity. Furthermore, the beneficial presence of HPßCD in the HA-based scaffolds paves the way for wound dressing applications with controlled drug encapsulation-release properties. As a proof of concept, naproxen (NAP), a non-steroidal anti-inflammatory drug was chosen as a model drug. NAP was impregnated into the scaffolds either in aqueous solution or under supercritical CO2. The resulting functional scaffolds showed a regular drug release profile along several days without losing the fibrous structure. This study proposes a simple approach to form stable HA-based nanofibrous scaffolds embedding HPßCD using water as the only solvent, enabling the development of safe functional wound dressings.

Polymer-free electrospinning of tannic acid and cross-linking in water for hybrid supramolecular nanofibres.

Electrospinning is the process of choice allowing the preparation of nanofibrous materials from a solution usually based on a high molar mass polymer. The solution must bring enough chain entanglements to avoid any breaking or Rayleigh instability of the electrospun jet resulting thus in the deposition of a continuous and regular solid nanofibre. It has been however shown that some few non-polymeric molecules can be electrospun without using a carrier polymer. We demonstrate here the case of tannic acid. Indeed, it was possible to electrospin this molecule solubilised in a mixture of water and ethanol as well as in pure water. Rheology, dynamic light scattering and cryo-TEM highlight the formation of tannic acid aggregates in solution. Above a critical concentration, these aggregates form a supramolecular interconnected network strong enough to allow the electrospinning of a continuous and regular nanofibre. The resulting nanoweb is mechanically stable and can be handled and wrapped. Furthermore, as opposed to the other small molecules for which polymer-free electrospinning was also demonstrated, tannic acid nanowebs can be efficiently cross-linked in water either by oxidative reaction with sodium periodate or, most interestingly, with FeIII by a combination of oxidative reaction and the formation of coordination complexes. The proposed electrospinning and cross-linking strategy is easy, of low cost, and scalable and uses non-toxic solvents as well as biocompatible and biofunctional molecules. Furthermore, thanks to the chelation capacity of tannic acid having the ability to coordinate with a wide variety of metals, hybrid smart nanowebs can be envisaged for diverse applications such as biomedical, catalysis as well as environment.

A multi-layered nerve guidance conduit design adapted to facilitate surgical implantation.

BACKGROUND AND AIMS: The gold standard procedure after a severe nerve injury is the nerve autograft, yet this technique has drawbacks. In recent years, progress has been made in the development of artificial nerve guides to replace the autograft, but no device has been able to demonstrate superiority. The present study introduces an adaptable foundation design for peripheral nerve regeneration. METHODS: Silk fibroin was electrospun, creating a tri-layered material with aligned fiber surfaces and a randomly deposited fiber interior. This material was rolled into a micro-channeled conduit, which was then enveloped by a jacket layer of the same tri-layered material. RESULTS: The proposed implant design succeeds in incorporating various desirable aspects of synthetic nerve guides, while facilitating the surgical implantation process for medical application. The aligned fiber surfaces of the conduit support axon guidance, while the tri-layered architecture improves its structural integrity compared with a fully aligned fiber material. Moreover, the jacket layer creates a small niche on each end which facilitates surgical implantation. An in vivo study in rats showed that nerve regeneration using this device was comparable to results after direct suture. CONCLUSION: This proof-of-principle study, therefore, advances the development of tissue engineered nerve grafts by creating an optimized guidance conduit design capable of successful nerve regeneration.

Poly(ε-caprolactone)/Hydroxyapatite 3D Honeycomb Scaffolds for a Cellular Microenvironment Adapted to Maxillofacial Bone Reconstruction.

The elaboration of biomimetic materials inspired from the specific structure of native bone is one the main goal of tissue engineering approaches. To offer the most appropriate environment for bone reconstruction, we combined electrospinning and electrospraying to elaborate an innovative scaffold composed of alternating layers of polycaprolactone (PCL) and hydroxyapatite (HA). In our approach, the electrospun PCL was shaped into a honeycomb-like structure with an inner diameter of 160 µm, capable of providing bone cells with a 3D environment while ensuring the material biomechanical strength. After 5 days of culture without any differentiation factor, the murine embryonic cell line demonstrated excellent cell viability on contact with the PCL-HA structures as well as active colonization of the scaffold. The cell differentiation, as tested by RT-qPCR, revealed a 6-fold increase in the expression of the RNA of the Bglap involved in bone mineralization as compared to a classical 2D culture. This differentiation of the cells into osteoblasts was confirmed by alkaline phosphatase staining of the scaffold cultivated with the cell lineage. Later on, organotypic cultures of embryonic bone tissues showed the high capacity of the PCL-HA honeycomb structure to guide the migration of differentiated bone cells throughout the cavities and the ridge of the biomaterial, with a colonization surface twice as big as that of the control. Taken together, our results indicate that PCL-HA honeycomb structures are biomimetic supports that promotes in vitro osteocompatibility, osteoconduction, and osteoinduction and could be suitable for being used for bone reconstruction in complex situations such as the repair of maxillofacial defects.

Rational Engineering of BODIPY-Bridged Trisindole Derivatives for Solar Cell Applications.

Boron dipyrromethene (BODIPY) and its derivatives are known to be efficient photon-harvesting chromophores. However, their study as active materials in bulk heterojunction (BHJ) solar cells is still scarce. In this study, the development of new synthetic ways to design original BODIPY-based dumbbell-shape molecules, including a first 2,3,5,6-tetravinyl aromatic BODIPY molecule, is reported. High fill factors can be obtained in BHJ solar cells when blended with a fullerene derivative, leading to a new record BODIPY-based power conversion efficiency of 5.8 %.

Sampling the structure and chemical order in assemblies of ferromagnetic nanoparticles by nuclear magnetic resonance.

Assemblies of nanoparticles are studied in many research fields from physics to medicine. However, as it is often difficult to produce mono-dispersed particles, investigating the key parameters enhancing their efficiency is blurred by wide size distributions. Indeed, near-field methods analyse a part of the sample that might not be representative of the full size distribution and macroscopic methods give average information including all particle sizes. Here, we introduce temperature differential ferromagnetic nuclear resonance spectra that allow sampling the crystallographic structure, the chemical composition and the chemical order of non-interacting ferromagnetic nanoparticles for specific size ranges within their size distribution. The method is applied to cobalt nanoparticles for catalysis and allows extracting the size effect from the crystallographic structure effect on their catalytic activity. It also allows sampling of the chemical composition and chemical order within the size distribution of alloyed nanoparticles and can thus be useful in many research fields.

Electrospun honeycomb as nests for controlled osteoblast spatial organization.

Honeycomb nanofibrous scaffolds were elaborated by electrospinning onto micro-patterned collectors either with poly(ϵ-caprolactone) (PCL) or poly(D, L-lactic acid) (PLA). The unimodal distribution of fiber diameters, observed for PLA, led to relatively flat scaffolds; on the other hand, the bimodal distribution of PCL fiber diameters significantly increased the relief of the scaffolds' patterns due to the preferential deposition of the thick fiber portions on the walls of the collector's patterns via preferential electrostatic interaction. Finally, a biological evaluation demonstrated the effect of the scaffolds' relief on the spatial organization of MG63 osteoblast-like cells. Mimicking hemi-osteons, cell gathering was observed inside PCL honeycomb nests with a size ranging from 80 to 360 µm.

Simultaneous electrospinning and electrospraying: a straightforward approach for fabricating hierarchically structured composite membranes.

We present here for the first time a simple method for micropatterning nonwoven composite membranes. The approach is based on the simultaneous electrospraying of microparticles and electrospinning of nanofibers from different polymer solution feeds (polyethylene glycol and poly(D,L-lactide)) on a common support. The mechanism of self-organization between fibers and particles into hierarchical honeycomb-like structures, as well as the evolution of the later as a function of the thickness of the composite, is investigated. We demonstrate that aggregates of particles, leading to a nonuniform distribution of the electrostatic field near the collector, are necessary to form the self-organized composite. Furthermore, it is shown that the specific dimensions of the generated patterns can be controlled by tuning the flow rate of electrospraying. The obtained composite mat exhibits a multilevel porous structure, with pore sizes ranging from few up to several hundreds of micrometers. Finally, it is shown that the microparticles can be selectively leached, allowing the production of a monocomponent membrane and retaining the hierarchical organization of the nanofibers suitable for biomedical and filtration applications.

Electrospun nanofibrous 3D scaffold for bone tissue engineering.

Tissue engineering aims at developing functional substitutes for damaged tissues by mimicking natural tissues. In particular, tissue engineering for bone regeneration enables healing of some bone diseases. Thus, several methods have been developed in order to produce implantable biomaterial structures that imitate the constitution of bone. Electrospinning is one of these methods. This technique produces nonwoven scaffolds made of nanofibers which size and organization match those of the extracellular matrix. Until now, seldom electrospun scaffolds were produced with thickness exceeding one millimeter. This article introduces a new kind of electrospun membrane called 3D scaffold of thickness easily exceeding one centimeter. The manufacturing involves a solution of poly(ε-caprolactone) in DMF/DCM system. The aim is to establish parameters for electrospinning in order to characterize these 3D scaffolds and, establish whether such scaffolds are potentially interesting for bone regeneration.