Forensics of polymer networks.

Our lives cannot be imagined without polymer networks, which range widely, from synthetic rubber to biological tissues. Their properties-elasticity, strain-stiffening and stretchability-are controlled by a convolution of chemical composition, strand conformation and network topology. Yet, since the discovery of rubber vulcanization by Charles Goodyear in 1839, the internal organization of networks has remained a sealed 'black box'. While many studies show how network properties respond to topology variation, no method currently exists that would allow the decoding of the network structure from its properties. We address this problem by analysing networks' nonlinear responses to deformation to quantify their crosslink density, strand flexibility and fraction of stress-supporting strands. The decoded structural information enables the quality control of network synthesis, comparison of targeted to actual architecture and network classification according to the effectiveness of stress distribution. The developed forensic approach is a vital step in future implementation of artificial intelligence principles for soft matter design.

Self-assembling amyloid-like nanostructures from SARS-CoV-2 S1, S2, RBD and N recombinant proteins.

Self-assembling nanoparticles (saNP) and nanofibers were found in the recombinant coronavirus SARS-CoV-2 S1, S2, RBD and N proteins purified by affinity chromatography using Ni Sepharose. Scanning electron (SEM), atomic force (AFM) microscopy on mica or graphite surface and in liquid as well as dynamic light scattering (DLS) revealed nanostructures of various sizes. AFM in liquid cell without drying on the surface showed mean height of S1 saNP 80.03 nm, polydispersity index (PDI) 0.006; for S2 saNP mean height 93.32 nm, PDI = 0.008; for N saNP mean height 16.71 nm, PDI = 0.99; for RBD saNP mean height 16.25 nm, PDI = 0.55. Ratios between the height and radius of each saNP in the range 0.1-0.5 suggested solid protein NP but not vesicles with internal empty spaces. The solid but not empty structures of the protein saNP were also confirmed by STEM after treatment of saNP with the standard contrasting agent uranyl acetate. The saNP remained stable after multiple freeze-thaw cycles in water and hyperosmotic solutions for 2 years at -20 °C. Receptor-mediated penetration of the SARS-CoV-2 S1 and RBD saNP in the African green mokey kidney Vero cells with the specific receptors for ß-coronavirus reproduction was more efficient compared to unspecific endocytosis into MDCK cells without the specific receptors. Amyloid-like structures were revealed in the SARS-CoV-2 S1, S2, RBD and N saNP by means of their interaction with Thioflavin T and Congo Red dyes. Taken together, spontaneous formation of the amyloid-like self-assembling nanostructures due to the internal affinity of the SARS-CoV-2 virion proteins might induce proteinopathy in patients, including conformational neurodegenerative diseases, change stability of vaccines and diagnostic systems.

Homeotropic orientation of an ion-channel forming mesophase induced by nanotemplate wetting.

Anodic aluminum oxide (AAO) membranes were used as templates to control orientation of an ion-channel forming columnar mesophase obtained by self assembly of a wedge-shaped sulfonate molecule. Inside the AAO structure, the director vector of the mesophase is oriented parallel to the pore axis due to the confinement effect. The molecular arrangement induced by the spatial confinement within the pores is extended over several microns into the remnant film on the AAO surface. The homeotropic alignment of the channels promotes unidimensional ion conduction through the film plane, which is manifested by a considerable increase in conductivity relative to isotropic samples.

Structural Characterization and Physicochemical Properties of Functionally Porous Proton-Exchange Membrane Based on PVDF-SPA Graft Copolymers.

Fluorinated proton-exchange membranes (PEMs) based on graft copolymers of dehydrofluorinated polyvinylidene fluoride (D-PVDF), 3-sulfopropyl acrylate (SPA), and 1H, 1H, 2H-perfluoro-1-hexene (PFH) were prepared via free radical copolymerization and characterized for fuel cell application. The membrane morphology and physical properties were studied via small-(SAXS) and wide-angle X-ray scattering (WAXS), SEM, and DSC. It was found that the crystallinity degree is 17% for PEM-RCF (co-polymer with SPA) and 16% for PEM-RCF-2 (copolymer with SPA and PFH). The designed membranes possess crystallite grains of 5-6 nm in diameter. SEM images reveal a structure with open pores on the surface of diameters from 20 to 140 nm. Their transport and electrochemical characterization shows that the lowest membrane area resistance (0.9 Ωcm2) is comparable to perfluorosulfonic acid PEMs (such as Nafion®) and polyvinylidene fluoride (PVDF) based CJMC cation-exchange membranes (ChemJoy Polymer Materials, China). Key transport and physicochemical properties of new and commercial membranes were compared. The PEM-RCF permeability to NaCl diffusion is rather high, which is due to a relatively low concentration of fixed sulfonate groups. Voltammetry confers that the electrochemical behavior of new PEM correlates to that of commercial cation-exchange membranes, while the ionic conductivity reveals an impact of the extended pores, as in track-etched membranes.

Remarkable Enhancement of Hole Mobility of Novel DA-D'-AD Small Molecules by Thermal Annealing: Effect of the D'-Bridge Block.

Conjugated small molecules are advanced semiconductor materials with attractive physicochemical and optoelectronic properties enabling the development of next-generation electronic devices. The charge carrier mobility of small molecules strongly influences the efficiency of organic and hybrid electronics based on them. Herein, we report the synthesis of four novel small molecules and their investigation with regard to the impact of molecular structure and thermal treatment of films on charge carriers' mobility. The benzodithiophene-containing compounds (BDT) were shown to be more promising in terms of tuning the morphology upon thermal treatment. Impressive enhancement of hole mobilities by more than 50 times was found for annealed films based on a compound M4 comprising triisopropylsilyl-functionalized BDT core. The results provide a favorable experience and strategy for the rational design of state-of-the-art organic semiconductor materials (OSMs) and for improving their charge-transport characteristics.

Synthesis of Calamitic Fluorinated Mesogens with Complex Crystallization Behavior.

This work presents the synthesis and self-organization of the calamitic fluorinated mesogen, 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-4-iodobutoxy)ethanesulfonic acid, a potential model for perfluorosulfonic acid membranes (PFSA). The compound is derived in three steps from 1,1,2,2-tetrafluoro-2-(1,1,2,2-tetrafluoro-2-iodoethoxy)ethanesulfonyl fluoride, achieving a 78% overall yield. The resulting compound exhibits intricate thermal behavior. At 150 °C, a crystal-to-crystal transition is observed due to the partial disordering of calamitic molecules, which is followed by isotropization at 218 °C. Upon cooling, sample ordering occurs through the formation of large smectic liquid crystalline phase domains. This thermotropic state transforms into a layered crystal phase at lower temperatures, characterized by alternating hydrophilic and hydrophobic layers. Using X-ray diffraction, crystalline unit cell models at both room temperature and 170 °C were proposed. Computer simulations of the molecule across varying temperatures support the idea that thermal transitions correlate with a loss of molecular orientation. Importantly, the study underscores the pivotal role of precursor self-organization in aligning channels during membrane fabrication, ensuring controlled and oriented positioning.

The effect of separation of blocks on the crystallization kinetics and phase composition of poly(butylene adipate) in multi-block thermoplastic polyurethanes.

The influence of the hard segment nature on the crystallization kinetics of multi-block thermoplastic polyurethanes containing poly(butylene adipate) (PBA) as a soft segment was investigated. Using a combination of FTIR spectroscopy, time-domain 1H nuclear magnetic resonance (TD-NMR), differential scanning calorimetry (DSC), fast-scanning calorimetry (FSC) and wide-angle X-ray diffraction (WAXS), it was shown that aliphatic, cycloaliphatic and aromatic diisocyanates affect the phase separation efficiency of soft and hard segments. The best phase separation efficiency was observed for a sample containing aliphatic diisocyanate due to the development of a hydrogen bond network. The thermal history, phase separation and the degree of ordering of the polyurethane determine the polymorphic behavior of melt-crystallized PBA. The formation of a partially-ordered mesophase of linear aliphatic polyurethane leads to an increase in the crystallization rate of PBA at room temperature and the formation of thermodynamically stable α-crystals. The presence of bulk cycloaliphatic and aromatic diol-urethane fragments prevents the phase separation of PBA, which crystallizes after slow cooling in a mixture of α- and ß-crystalline forms. The new nanocalorimetry technique allows the identification of a direct correlation between the phase separation and crystallization kinetics of the melt-crystallized PBA in a wide range of cooling rates - from 2 to 30 000 K s-1. Particularly, ultra-fast cooling suppresses the nucleation of the ß-phase of PBA resulting in slow crystallization of only α-modification at room temperature. The role of the polyurethane mesophase in the crystallization of the soft segment was discussed for the first time.

Tailoring the charge transport characteristics in ordered small-molecule organic semiconductors by side-chain engineering and fluorine substitution.

Crystalline and liquid-crystalline conjugated small molecules represent a promising family of semiconductor materials for organic electronics applications. The control of the morphology and optoelectronic properties of small molecules allows tuning their charge transport characteristics and hence, improving the performance of electronic devices. Here, we designed four pentamers based on alternating thiophene and benzothiadiazole moieties and investigated the effect of their structure on the optoelectronic properties, ordering and charge transport characteristics. It is shown that thermal annealing of conjugated pentamers leads to remarkable changes in the microstructure and domain texture of thin films. As a result, an increase in hole mobility for compound M4 by one order of magnitude was achieved. These findings provide a valuable insight into the structure-property relationships for designed small molecules featuring them as promising semiconductor materials for further developing high-performance organic electronics.

Ion and Water Transport in Ion-Exchange Membranes for Power Generation Systems: Guidelines for Modeling.

Artificial ion-exchange and other charged membranes, such as biomembranes, are self-organizing nanomaterials built from macromolecules. The interactions of fragments of macromolecules results in phase separation and the formation of ion-conducting channels. The properties conditioned by the structure of charged membranes determine their application in separation processes (water treatment, electrolyte concentration, food industry and others), energy (reverse electrodialysis, fuel cells and others), and chlore-alkali production and others. The purpose of this review is to provide guidelines for modeling the transport of ions and water in charged membranes, as well as to describe the latest advances in this field with a focus on power generation systems. We briefly describe the main structural elements of charged membranes which determine their ion and water transport characteristics. The main governing equations and the most commonly used theories and assumptions are presented and analyzed. The known models are classified and then described based on the information about the equations and the assumptions they are based on. Most attention is paid to the models which have the greatest impact and are most frequently used in the literature. Among them, we focus on recent models developed for proton-exchange membranes used in fuel cells and for membranes applied in reverse electrodialysis.

Cuticle - Designed by nature for the sake of the hair.

OBJECTIVE: The cuticle of human hair has been examined, via a range of analytical methods, in order to reveal previously unknown information about its structure and to deepen understanding of its contribution to fibre properties. METHODS: Cross-sections of hair fibre have been examined with X-ray microdiffraction oriented perpendicular to the surface of the cross-sections. AFM investigations were carried out for further investigating and deciphering the structure of the cuticle. Moisture sorption analytics of cuticle separated from fibre and mechanical tests of decuticled fibres against virgin fibres were used for understanding the role of the cuticle in the economy of hair fibre. RESULTS: Previously unknown swelling behaviour of the hair cuticle during moisture sorption has been revealed, as has an increased significance of the cuticle's role in moisture management at higher values of relative humidity. Through AFM investigation, the reaction of hair cuticles with chlorine water has further strengthened the idea that the Allwörden membrane does not exist, and is actually an artefact of the delamination of the A-layer and exocuticle from the underlying endocuticle. Using decuticled fibres for stress-strain tests, and by comparing the results with those of virgin fibres, the effect of the cuticle on the post-yield area of the hair fibre stress-strain diagram has also been demonstrated. Finally, X-ray microdiffraction and AFM investigations suggest that the cuticle possesses a small-scale ordered structure, based on possibly not fully crystalline and irregularly arranged α-helices oriented almost perpendicular to the growth axis of the fibre and enhancing the general description of cuticle as the protective layer of the fibre. CONCLUSION: The role of the cuticle for the hair fibre is more complex than previously thought. The cuticle is demonstrated not only to possess a hidden rod-matrix structure, that supports its protective nature, but also to play specific roles in the fibre's response to moisture, and in fibre mechanical behaviour.

OBJECTIF : la cuticule des cheveux humains a été examinée à l'aide d'un ensemble de méthodes analytiques, afin de révéler des informations jusqu'alors inconnues sur sa structure et d'approfondir la compréhension de son rôle dans les propriétés de la fibre. MÉTHODES : des coupes transversales de fibres capillaires ont été examinées par microdiffraction radiographique orientée perpendiculairement à la surface des coupes. Des expérimentations par AFM ont été réalisées pour approfondir les recherches et découvrir la structure de la cuticule. Des analyses d'absorption de l'humidité de la cuticule séparée de la fibre et des tests mécaniques des fibres décuticulées par rapport aux fibres vierges ont été utilisés pour comprendre le rôle de la cuticule dans la préservation de la fibre capillaire. RÉSULTATS : un comportement de gonflement jusqu'alors inconnu de la cuticule des cheveux durant l'absorption de l'humidité a été révélé, de même qu'une importance accrue du rôle de la cuticule dans la gestion de l'humidité à des valeurs plus élevées d'humidité relative. À l'aide des expérimentations par AFM, la réaction de la cuticule des cheveux avec de l'eau chlorée a à nouveau renforcé l'idée selon laquelle la membrane d'Allwörden n'existe pas et est en réalité un artéfact de délaminage de la couche A et de l'exocuticule provenant de l'endocuticule sous-jacente. L'utilisation de fibres décuticulées pour des tests de contrainte et la comparaison des résultats avec ceux de fibres vierges ont également démontré l'effet de la cuticule sur la zone post-rendement du diagramme de contrainte de la fibre capillaire. Enfin, les expérimentations par microdiffraction radiographique et AFM suggèrent que la cuticule possède une structure ordonnée à petite échelle, basée sur des hélices alpha potentiellement non entièrement cristallines et disposées de manière irrégulière, orientées presque perpendiculairement à l'axe de croissance de la fibre, améliorant la description générale de la cuticule comme couche protectrice de la fibre. CONCLUSION : le rôle de la cuticule pour la fibre capillaire est plus complexe qu'on ne le pensait. Il a été démontré que la cuticule possède non seulement une structure rod-matrix cachée, qui maintient sa nature protectrice, mais joue également des rôles spécifiques dans la réponse de la fibre à l'humidité et dans son comportement mécanique.

Nanomechanical properties of Monilethrix affected hair are independent of phenotype.

Utilising the AFM nanoindentation technique for the study of hair cross- and longitudinal sections, the mechanical anisotropy of human hair fibres affected by a rare congenital condition, Monilethrix, has been investigated for the first time. Supported by X-ray microdiffraction data, and applying a model based on an ideal composite material consisting of rods (KIFs) and matrix (KAPs) to Monilethrix affected fibres, it has been shown that the results could be grouped into clearly different classes, namely: almost isotropic behaviour for Monilethrix affected hairs and anisotropic behaviour for Control hair. Moreover, AFM nanoindentation of hair cross sections has demonstrated, also for the first time that hairs affected by Monilethrix have a continuous, and not periodic, weakness within the cortex. This has been attributed to disruptions in the KIF-KIF, KIF-intermacrofibrillar matrix or KIF-desmosome complexes within the hair shaft, as suggested by X-ray microdiffraction examination. Hairs from a patient exhibiting no obvious phenotype exhibited similar mechanical weakness despite the otherwise normal visual appearance of the fibre. This further supports a hypothesis that the beaded appearance of Monilethrix hair is a secondary factor, unrelated to the inherent structural weakness.

Self-Assembly of Low-Molecular-Weight Asymmetric Linear Triblock Terpolymers: How Low Can We Go?

The synthesis of two (2) novel triblock terpolymers of the ABC type and one (1) of the BAC type, where A, B and C are chemically different segments, such as polystyrene (PS), poly(butadiene) (PB1,4) and poly(dimethylsiloxane) (PDMS), is reported; moreover, their corresponding molecular and bulk characterizations were performed. Very low dimensions are evident from the characterization in bulk from transmission electron microscopy studies, verified by small-angle X-ray data, since sub-16 nm domains are evident in all three cases. The self-assembly results justify the assumptions that the high Flory-Huggins parameter, χ, even in low molecular weights, leads to significantly well-ordered structures, despite the complexity of the systems studied. Furthermore, it is the first time that a structure/properties relationship was studied for such systems in bulk, potentially leading to prominent applications in nanotechnology and nanopatterning, for as low as sub-10 nm thin-film manipulations.

Dendrons and Dendritic Terpolymers: Synthesis, Characterization and Self-Assembly Comparison.

To the best of our knowledge, this is the very first time that a thorough study of the synthetic procedures, molecular and thermal characterization, followed by structure/properties relationship for symmetric and non-symmetric second generation (2-G) dendritic terpolymers is reported. Actually, the synthesis of the non-symmetric materials is reported for the first time in the literature. Anionic polymerization enables the synthesis of well-defined polymers that, despite the architecture complexity, absolute control over the average molecular weight, as well as block composition, is achieved. The dendritic type macromolecular architecture affects the microphase separation, because different morphologies are obtained, which do not exhibit long range order, and various defects or dislocations are evident attributed to the increased number of junction points of the final material despite the satisfactory thermal annealing at temperatures above the highest glass transition temperature of all blocks. For comparison reasons, the initial dendrons (miktoarm star terpolymer precursors) which are connected to each other in order to synthesize the final dendritic terpolymers are characterized in solution and in bulk and their self-assembly is also studied. A major conclusion is that specific structures are adopted which depend on the type of the core connection between the ligand and the active sites of the dendrons.

Aqueous microgels modified with photosensitive wedge-shaped amphiphilic molecules: synthesis, structure and photochemical behaviour.

Aqueous microgels based on poly(N-vinylcaprolactam) with reversible temperature-induced volume transition are promising "smart" materials for various applications. In this work, the microgels are modified via acid-base interaction by wedge-shaped amphiphilic sulfonic acid molecules with alkyl chains of different lengths and an azobenzene group. In contrast to the pristine microgel the modified microgels retain colloidal stability in water and show different responses to the change of temperature and pH. The azobenzene group in the ligand molecules acts as a spectroscopic and kinetic probe sensing the microenvironment inside the microgel particles. Thus, the observed hyperchromicity upon heating suggests the enhancement of hydrophobicity with the increase of temperature. The hydrophobicity of the microgel interior increases with the increase of the modification degree as indicated by the increase of activation energy of the thermal Z/E isomerization of the azobenzene group.

Thermal transformations of self-assembled gold glyconanoparticles probed by combined nanocalorimetry and X-ray nanobeam scattering.

Noble metal nanoparticles with ligand shells are of interest for applications in catalysis, thermo-plasmonics, and others, involving heating processes. To gain insight into the structure-formation processes in such systems, self-assembly of carbohydrate-functionalized gold nanoparticles during precipitation from solution and during further heating to ca. 340 °C was explored by in situ combination of nanobeam SAXS/WAXS and nanocalorimetry. Upon precipitation from solution, X-ray scattering reveals the appearance of small 2D domains of close-packed nanoparticles. During heating, increasing interpenetration of the nanoparticle soft shells in the domains is observed up to ca. 81 °C, followed by cluster formation at ca. 125 °C, which transform into crystalline gold nuclei at around 160 °C. Above ca. 200 °C, one observes the onset of coalescence and grain growth resulting in gold crystallites of average size of about 100 nm. The observed microstructural changes are in agreement with the in situ heat capacity measurements with nanocalorimetry.

High-resolution thermal imaging with a combination of nano-focus X-ray diffraction and ultra-fast chip calorimetry.

A microelectromechanical-systems-based calorimeter designed for use on a synchrotron nano-focused X-ray beamline is described. This instrument allows quantitative DC and AC calorimetric measurements over a broad range of heating/cooling rates (≤100000 K s(-1)) and temperature modulation frequencies (≤1 kHz). The calorimeter was used for high-resolution thermal imaging of nanogram-sized samples subjected to X-ray-induced heating. For a 46 ng indium particle, the measured temperature rise reaches ∼0.2 K, and is directly correlated to the X-ray absorption. Thermal imaging can be useful for studies of heterogeneous materials exhibiting physical and/or chemical transformations. Moreover, the technique can be extended to three-dimensional thermal nanotomography.

Bottlebrush Elastomers with Crystallizable Side Chains: Monolayer-like Structure of Backbones Segregated in Intercrystalline Regions.

Bottlebrush (BB) elastomers with water-soluble side chains and tissue-mimetic mechanical properties are promising for biomedical applications like tissue implants and drug depots. This work investigates the microstructure and phase transitions of BB elastomers with crystallizable polyethylene oxide (PEO) side chains by real-time synchrotron X-ray scattering. In the melt, the elastomers exhibit the characteristic BB peak corresponding to the backbone-to-backbone correlation. This peak is a distinct feature of BB systems and is observable in small- or medium-angle X-ray scattering curves. In the systems studied, the position of the BB peak ranges from 3.6 to 4.8 nm in BB elastomers. This variation is associated with the degree of polymerization of the polyethylene oxide (PEO) side chains, which ranges from 19 to 40. Upon crystallization of the side chains, the intensity of the peak decays linearly with crystallinity and eventually vanishes due to BB packing disordering within intercrystalline amorphous gaps. This behavior of the bottlebrush peak differs from an earlier study of BBs with poly(ε-caprolactone) side chains, explained by stronger backbone confinement in the case of PEO, a high-crystallinity polymer. Microstructural models based on 1D SAXS correlation function analysis suggest crystalline lamellae of PEO side chains separated by amorphous gaps of monolayer-like BB backbones.

Controlling conjugated polymer morphology by precise oxygen position in single-ether side chains.

Recently, polar side chains have emerged as a functional tool to enhance conjugated polymer doping properties by improving the polymer miscibility with polar chemical dopants and facilitate solvated ion uptake. In this work, we design and investigate a novel family of side chains containing a single ether function, enabling the modulation of the oxygen atom position along the side chain. A meticulous investigation of this new polymer series by differential scanning calorimetry, fast scanning chip calorimetry and X-ray scattering shows that polymers bearing single-ether side chains can show high degree of crystallinity under proper conditions. Importantly, due to a gauche effect allowing the side chain to bend at the oxygen atom, the degree of crystallinity of polymers can be controlled by the position of the oxygen atom along the side chain. The further the oxygen atom is from the conjugated backbone, the more crystalline the polymer becomes. In addition, for all new polymers, high thermomechanical properties are demonstrated, leading to remarkable electrical conductivities and thermoelectric power factors in rub-aligned and sequentially doped thin films. This work confirms the potential of single-ether side chains to be used as polar solubilizing side chains for the design of a next generation of p- and n-type semiconducting polymers with increased affinity to polar dopants while maintaining high molecular order.

A diacetylene-containing wedge-shaped compound: synthesis, morphology, and photopolymerization.

A novel wedge-shaped compound containing two diacetylene tails, namely, methyl 3,5-bis(trideca-2,4-diyn-1yloxyl)benzoate (DDABM), was synthesized. As shown by UV/Vis spectroscopy this compound can be polymerized under UV irradiation. The crystalline structure of DDABM was investigated by grazing-incidence wide-angle X-ray diffraction on oriented crystalline films deposited on PTFE-rubbed silicon wafer substrates. Furthermore, the spherulites formed in thicker films were analyzed by wide-angle X-ray diffraction. A molecular packing model of DDABM based on the X-ray diffraction data is proposed. The diacetylene units are oriented along a defined lattice direction with a reticular distance of 4.85 Å, which fulfills the requirements for topochemical polymerization. It was observed that UV polymerization does not affect the phase behavior of the compound, but mainly alters its optical properties.

Non-radial growth of helical homopolymer crystals: breaking the paradigm of the polymer spherulite microstructure.

Radial symmetry is essential for the conventional view of the polymer spherulite microstructure. Typically it is assumed that, in the course of the spherulite morphogenesis, the lamellar crystals grow radially. Using submicron X-ray diffraction, it is shown that in banded spherulites of poly(propylene adipate) the crystals have the shape of a helix with flat-on crystals winding around a virtual cylinder of about 6 µm in diameter. The helix angle of 30° implies that the crystal growth direction is tilted away from the spherulite radius by this angle. The implications of the helical crystal shape contradict the paradigm of the spherulitic microstructure. The radial growth rate of such spherulites does not correspond to the crystal growth rate, but to the propagation rate of the virtual cylinder the ribbons wind around.