Preparation of PS/PVP/TiO2 Core-Shell Particles Under Various Reaction Factors.

The present study deals with the formation of monodisperse sub-micron sized PS/PVP/TiO2 core- shell hybrid particles via in situ sol-gel method and the effects of varying concentrations of polystyrene seed latex and TBOT, amount and addition rate of water, and sonication power. These reaction factors were found to be closely related to the final particle size, TiO2 shell thickness, particle density, refractive index, and thermal properties. The particle densities and the refractive indices of the resulting PS/PVP/TiO2 core-shell hybrid particles were in the range of 2.71~3.69 g/cm³ and 1.63~2.12, respectively.

Phytochemical Composition and Antioxidant Activities of Two Different Color Chrysanthemum Flower Teas.

Chrysanthemum morifolium Ramat is a perennial flowering plant widely cultivated for use in a tea infusion and as a popular beverage. To identify and evaluate the tea infusion made with a γ-irradiated mutant chrysanthemum cultivar with dark purple petals (cv. ARTI-Dark Chocolate), its phytochemical composition and antioxidant activity were tested and compared with those of the commercially available chrysanthemum cultivar with yellow petals (cv. Gamguk) by HPLC-DAD-ESIMS, as well as DPPH and ABTS radical scavenging assays. The purple chrysanthemum tea contained anthocyanins and linarin, which were not detected in the yellow chrysanthemum tea and the content of chlorogenic acid, acacetin-7-O-ß-glucoside, and luteolin was higher compared with the yellow chrysanthemum tea. In contrast, the yellow chrysanthemum tea had higher luteolin-7-O-ß-glucoside, 3,5-dicaffeoylquinic acid, apigenin-7-O-ß-glucoside, and apigenin contents in comparison with the purple chrysanthemum tea. In addition, the content and antioxidant activity of the two chrysanthemum teas were investigated according to different water temperatures and infusing time. The yellow chrysanthemum tea did not show any significant differences according to infusing time and temperature, while the purple chrysanthemum tea was more influenced by the infusing time than water temperature, showing the highest total compound content in the infusing condition of 100 °C and 4 min. Moreover, the floral scent volatiles of the two chrysanthemum tea sources were analyzed using HS-SPME-GC-MS. In the DPPH radical scavenging assay, the purple chrysanthemum tea broadly showed greater antioxidant activity than did the yellow chrysanthemum tea, corresponding to the high content of anthocyanins known as the powerful antioxidant. Further, both chrysanthemum flower teas exhibited strong ABTS radical scavenging effects ranging from 76% to 61% under all infusing conditions. Therefore, the purple chrysanthemum cultivar, ARTI-Dark Chocolate, is worthy of breeding as a new tea cultivar.

Effects of ultrasonication, agitation and stirring extraction techniques on the physicochemical properties, health-promoting phytochemicals and structure of cold-brewed coffee.

BACKGROUND: Ultrasonication, agitation and stirring or a combination of ultrasonication, agitation and stirring extraction techniques were applied to observe their effects on the physicochemical properties, health-promoting phytochemicals, and structure of cold brewed coffee. RESULTS: All the extraction techniques led to significant (P < 0.05) increases in the color values, total soluble solids, antioxidant activities and most organic acids, while a combination of extraction techniques increased the chlorogenic acid and caffeine content significantly (P < 0.05) compared with that by conventional methods. Fourier transform infrared spectroscopy allowed us to identify the different compounds in the cold-brewed coffee extract rapidly. The partial least square regression model presented good predictability because experimental and predicted values were close to each other. Principal component analysis revealed that levels of all phytochemicals correlated with the use of non-conventional methods. CONCLUSION: The combination of ultrasonication and agitation might be the best option to enhance the various phytochemicals in cold-brewed coffee. © 2018 Society of Chemical Industry.

Comparison of freeze-drying and hot air-drying on Asian pear (Pyrus pyrifolia Nakai 'Niitaka') powder: changes in bioaccessibility, antioxidant activity, and bioactive and volatile compounds.

The bioaccessibility, antioxidant activity, and bioactive and volatile compounds of freeze-dried Asian pear powder (FDAPP) and hot air-dried Asian pear powder (HDAPP) were investigated. Compared to FDAPP, HDAPP exhibited significantly (p < 0.05) higher total phenolic, arbutin, and bioaccessible phenolic contents and the ferric reducing ability of plasma for the free phenolic fraction. However, all antioxidant activities for the bound phenolic fraction were lower in HDAPP, which could contribute to the release of bound antioxidant components due to cell rupture in the HDAPP. Based on the volatile profile, hot air drying provided a sweet as well as attractive flavor in the Asian pear powder (APP). Considering economic viability, higher levels of bioactive compounds, and desirable aromatic properties, hot air drying is the better option compared to freeze-drying for APP production, which could be used as a functional ingredient in food products.

Preparation of poly(BMA-co-MMA) particles by soap-free emulsion polymerization and its optical properties as photonic crystals.

Narrowly dispersed poly(BMA-co-MMA) and PBMA latices with particle diameters ranging within 216-435 nm were synthesized successfully by surfactant-free emulsion polymerization with KPS and AIBA. The average particle diameter and particle size distribution, average molecular weight and its distribution, glass transition temperature, reflectance spectra in visible wavelength, and refractive indices for the respective poly(BMA-co-MMA) latices and their photonic crystals were systematically investigated in terms of BMA/MMA ratio, BMA content, polymerization temperature, and DVB effect. The rate of polymerization increased with increasing MMA concentration in BMA/MMA ratio. The particle diameter increased with BMA concentration in BMA/MMA ratio. The molecular weight increased with BMA concentration in BMA/MMA ratio and monomer concentration. The drying of the latices offered self-assembled shiny colloidal crystal films showing the characteristic structural colors in visible wavelength. All the poly(BMA-co-MMA) latices prepared in the study were fallen within the range of photonic grade microspheres. The reflectance measurement on the colloidal photonic crystals having different particle diameters clearly exhibited narrow stopbands. The reflection maxima (λ(max)) measured in this study were well close to the λ(max) calculated, derived from the Bragg's equation. The refractive indices of poly(BMA-co-MMA) photonic crystals were found to be almost same as the theoretical values and increased proportionally from 1.50 to 1.57 with BMA content in BMA/MMA ratios. It was, thus, found that the optical reflectance properties of the poly(BMA-co-MMA) colloidal photonic crystals can be controlled easily by adjusting the reaction conditions and BMA/MMA ratio in soap-free emulsion copolymerization of BMA and MMA.

Surfactant-free, cationic latices of poly(BMA-co-MMA) using AIBA initiator.

When polymer particles come into use, especially, for photonic crystal applications, their diameter, dispersivity, and refractive indices become very important. Poly(benzyl methacrylate) is known to be a kind of high refracive materials (n = 1.57) compared to poly(methyl methacrylate) (n = 1.49). Not many work was concerned for surfactant-free emulsion polymerization of benzyl methacrylate or its copolymerization using cationic initiators. Narrowly dispersed cationic poly(BMA-co-MMA) and PBMA latices were synthesized successfully by surfactant-free emulsion polymerization with AIBA. The influences of BMA/MMA ratio, BMA/MMA monomer and initiator concentrations, addition of DVB/EGDMA crosslink agent, and polymerization temperature on the kinetics and on the particle size and molecular weight were studied. Monodisperse cationic charged PBMA and poly(BMA-coMMA) latices with particle diameters varying between 160-494 nm and polymer molecular weights of the order 1.25 x 10(4) to 7.55 x 10(4) g/mol were prepared. The rate of polymerization increased with increasing MMA concentration in BMA/MMA ratio, AIBA concentration, DVB crosslink agent, and polymerization temperature. The particle diameter increased with BMA concentration in BMA/MMA ratio, AIBA concentration, and BMA/MMA monomer concentration. The molecular weight increased with BMA concentration in BMA/MMA ratio and BMA/MMA monomer concentration. The glass transition temperature of the latex copolymers decreased with increasing amount of BMA from 375 K for PMMA to 321 K for PBMA. It was, thus, found that the particle diameter and rate of polymerization as well as the polymer molecular weight for surfactant-free emulsion polymerization of BMA and MMA can be controlled easily by controlling the BMA/MMA ratio, BMA/MMA monomer concentration, AIBA concentration, and polymerization temperature.

Effect of topical anesthesia on evaluation of corneal sensitivity and intraocular pressure in rats and dogs.

OBJECTIVE: To determine the effect of 0.5% proparacaine in tonometry by evaluating corneal touch threshold (CTT) and intraocular pressure (IOP). ANIMAL STUDIED: Nine rats (18 eyes, Sprague-Dawley) and 10 dogs (20 eyes, Beagle) PROCEDURES: The IOP and CTT were measured in each eye before and after topical anesthesia with 0.5% proparacaine. The IOP was evaluated using Tonopen for dogs and Tonolab for rats. The corneal sensitivity was evaluated by CTT through a Cochet-Bonnet aesthesiometer. RESULTS: The mean IOP was not significantly changed in rats or dogs before and after topical anesthesia. However, after application of proparacaine, CTT was significantly increased in both animal groups compared with that before application of proparacaine. CONCLUSION: From this study, topical anesthesia was found to significantly lower the corneal sensitivity but have little effect on IOP measurements. In ophthalmologic examination, topical anesthesia can be used to reduce corneal sensation without an effect on IOP.

Case report: Investigation of genetic mutations in a case of schistosomus reflexus in a Holstein dairy cattle fetus in Korea.

Schistosomus reflexus (SR) is one of the most common congenital anomalies found in cases of cattle dystocia; this disorder occurs mostly in cattle. Congenital anomalies such as SR are caused by various genetic and environmental factors, but no specific cause has been elucidated for SR. This study reports a case of SR in a Holstein dairy cattle fetus with congenital anomalies in Korea. Grossly, a distinct spine curvature was observed between the thoracic and lumbar vertebrae, accompanied by a consequential malformation from the sacrum to the occipital bone. Furthermore, the thoracic and abdominal organs were exposed. In computed tomography (CT) images, mild and severe kyphoscoliosis was observed in T1~11 and L1~6, respectively. Additionally, vertebral dysplasia was observed in S1~5 and Cd 1~5. To pinpoint the causal genes and mutations, we leveraged a custom 50K Hanwoo SNP-Chip and the Online Mendelian Inheritance in Animals (OMIA) database. As a result, we identified a nonsense mutation in apoptotic protease activating factor 1 (APAF1) within HH1 that was associated with a decrease in conception rate and an increase in abortion in Holstein dairy cattle. The genotype of the SR case was A/A, and most of the 1,142 normal Holstein dairy cattle tested as a control group had the genotype G/G. In addition, the A/A genotype did not exist in the control group. Based on the pathological, genetic, and radiological findings, the congenital abnormalities observed were diagnosed as SR.

Clear cell variant mucoepidermoid carcinoma of salivary gland in a grey wolf (Canis lupus).

A 14-year-old male grey wolf (Canis lupus) with a history of severe facial swelling was submitted for necropsy. Clinical and radiological examination demonstrated an expansile neoplastic mass in the nasal and frontal sinuses. On necropsy, an amorphous neoplastic mass and extensive necrosis were observed in the nasal turbinate. Microscopic examination revealed a tumour principally composed of obvious clear tumour cells characterised by small hyperchromatic nuclei and abundant clear cytoplasm. These clear cells were positive for mucin with PAS, PAS-D reaction, and alcian blue (pH 2.5) staining, but negative for PTAH staining. Immunohistochemically, some of tumour cells were strongly positive for mesenchymal cells (vimentin), whereas they were negative for myoepithelial antigen (alpha-SMA) and cytokeratin. Based on the histopathological and immunohistochemical features, the present case was diagnosed as high-grade clear cell variant mucoepidermoid carcinoma (MEC). This is the first description of clear cell variant MEC in a wolf.

A case of concomitant EGFR/ALK alteration against a mutated EGFR background in early-stage lung adenocarcinoma.

Rare cases of lung adenocarcinoma (LUAD) with concomitant epidermal growth factor receptor (EGFR) mutation and anaplastic lymphoma kinase (ALK) translocation have been reported. However, their clonal and evolutional relationship remains unclear. We report a case of early-stage EGFR-mutated LUAD with a focal concomitant EGFR/ALK alteration. A 63-year-old male underwent lobectomy to remove a 1.9-cm-sized lung nodule, which was diagnosed with EGFR-mutated LUAD. ALK immunohistochemistry (IHC) showed focal positivity within the part of the tumor characterized by lepidic pattern, also confirmed by fluorescence in-situ hybridization (FISH). Targeted next-generation sequencing was performed separately on the ALK IHC/FISH-positive and -negative areas. EGFR L833V/L858R mutations were detected in both areas, whereas EML4 (echinoderm microtubule-associated protein-like 4)-ALK translocations was confirmed only in the ALK IHC/FISH-positive area, suggesting the divergence of an EGFR/ALK co-altered subclone from the original EGFR-mutant clone. Our study suggests that concurrent alterations of EGFR and ALK can arise via divergent tumor evolution, even in the relatively early phases of tumorigenesis.

Successful treatment of an unusually large corneal epithelial inclusion cyst using equine amniotic membrane in a dog.

A 10-year-old intact male Yorkshire Terrier was referred for investigation of a large raised and nonpainful corneal lesion oculus dexter. Clinical examination revealed a pale, translucent corneal mass, which occupied half of the corneal surface and measured 11 mm x 11 mm x 13 mm. The mass was removed by superficial keratectomy and equine amniotic membrane (AM) was transplanted into the large corneal defect to cover the wound and provide tectonic support for the remaining cornea. The mass was histologically confirmed as a corneal epithelial inclusion cyst. There was no evidence of recurrence or complication at the surgical site 100 days postoperatively. Corneal epithelial inclusion cysts are uncommon in dogs. Although superficial keratectomy is the recommended treatment for corneal inclusion cyst, the combination of superficial keratectomy and AM transplantation had to be considered as an alternative for repair of large corneal defects. This is the first case report of the combined application of AM and superficial keratectomy to successfully treat a corneal inclusion cyst in a dog.

Electromagnet weight reduction in a magnetic levitation system for contactless delivery applications.

This paper presents an optimum design of a lightweight vehicle levitation electromagnet, which also provides a passive guide force in a magnetic levitation system for contactless delivery applications. The split alignment of C-shaped electromagnets about C-shaped rails has a bad effect on the lateral deviation force, therefore, no-split positioning of electromagnets is better for lateral performance. This is verified by simulations and experiments. This paper presents a statistically optimized design with a high number of the design variables to reduce the weight of the electromagnet under the constraint of normal force using response surface methodology (RSM) and the kriging interpolation method. 2D and 3D magnetostatic analysis of the electromagnet are performed using ANSYS. The most effective design variables are extracted by a Pareto chart. The most desirable set is determined and the influence of each design variable on the objective function can be obtained. The generalized reduced gradient (GRG) algorithm is adopted in the kriging model. This paper's procedure is validated by a comparison between experimental and calculation results, which shows that the predicted performance of the electromagnet designed by RSM is in good agreement with the simulation results.

Rapid Identification Method for Gamma-Irradiated Soybeans Using Gas Chromatography-Mass Spectrometry Coupled with a Headspace Solid-Phase Microextraction Technique.

This study evaluated the applicability of a rapid analytical method using a headspace solid-phase microextraction gas chromatography/mass spectrometry (HS-SPME-GC/MS) technique to identify gamma-irradiated soybeans (0.1-5 kGy). From the partial least squares discriminant analysis used to discriminate between non-irradiated and irradiated soybean samples, 1,7-hexadecadiene was selected as the identifying marker. Response surface methodology experiments were used to determine the optimal HS-SPME extraction conditions including a carboxen/polydimethylsiloxane fiber with an extraction temperature of 98 °C and an extraction time of 55 min. 1,7-Hexdecadiene was detected in all samples irradiated at ≥ 0.1 kGy under the optimized HS-SPME-GC/MS conditions, and the unique presence of the marker in a gamma-irradiated sample was verified by comparing the results from heat, steam, microwave, sonication, and ultraviolet treatments. The comparisons of the identification properties for various conventional methods validated several advances in HS-SPME-GC/MS analysis in terms of rapid analysis, high sensitivity, and absence of solvent.

Effects of X-ray irradiation on the postharvest quality characteristics of 'Maehyang' strawberry (Fragaria × ananassa).

This study evaluated the effects of X-ray irradiation (0-1 kGy) on quality parameters of Korean strawberries during storage at 15 °C for 9 d. As compared to control, all irradiated samples exhibited dose-dependent decreases in microbial counts regardless of storage period. Irradiation significantly (p < 0.05) reduced weight loss and decay incidence of fruits during storage. Fruit firmness decreased immediately after irradiation, but no significant changes occurred after 3 d. Neither irradiation nor storage period significantly affected total soluble solids, pH, or titratable acidity. All treatments delayed color changes and pelargonidin accumulation during storage. The radical scavenging activities and total phenolic, ellagic acid, and catechin contents increased gradually during storage. Furthermore, irradiated fruits showed improved sensory characteristics throughout storage. Thus, X-ray irradiation (≤1 kGy) was confirmed as a effective phytosanitary treatment for strawberries to delay decay and negative physicochemical changes and extend shelf life with acceptable sensory attributes.

Laboratory formulated magnetic nanoparticles for enhancement of viral gene expression in suspension cell line.

One factor critical to successful gene therapy is the development of efficient delivery systems. Although advances in gene transfer technology including viral and non-viral vectors have been made, an ideal vector system has not yet been constructed. Due to the growing concerns over the toxicity and immunogenicity of viral DNA delivery systems, DNA delivery via improve viral routes has become more desirable and advantageous. The ideal improve viral DNA delivery system should be a synthetic materials plus viral vectors. The materials should also be biocompatible, efficient, and modular so that it is tunable to various applications in both research and clinical settings. The successful steps towards this improve viral DNA delivery system is demonstrated: a magnetofection system mediated by modified cationic chitosan-coated iron oxide nanoparticles. Dense colloidal cationic iron oxide nanoparticles serve as an uptake-enhancing component by physical concentration at the cell surface in presence of external magnetic fields; enhanced viral gene expression (3-100-fold) due to the particles is seen as compared to virus vector alone with little virus dose.

N-hexanoyl chitosan-stabilized magnetic nanoparticles: enhancement of adenoviral-mediated gene expression both in vitro and in vivo.

We developed hexanoyl chloride-modified chitosan (Nac-6) stabilized iron oxide nanoparticles (Nac-6-IOPs) as magnetic nanoparticles for viral gene (Ad/LacZ) delivery via magnetofection. This vector, Nac-6-IOPs/Ad/LacZ, binds to K562 cells in the presence of external magnetic fields and results in enhanced expression of the transgene in those cells that do not exhibit the coxsackie-adenovirus receptor (CAR). Our results demonstrate that Nac-6-IOPs/Ad/LacZ is able to transduce K562 cells specifically with reduced infection of CAR- cells. The dramatic enhancement in intracellular trafficking of the adenovirus without genetically modified vesicles can lead to enhanced nuclear transfer, especially in CAR- cells. In vivo magnetofection results also clearly demonstrated that the present Nac-6-IOPs could be applied in other cell lines. Whether cells or organs, in the presence of magnetic fields Nac-6-IOPs/Ad/LacZ has high transduction efficiency. The newly formulated Nac-6-IOPs, introduced by magnetofection, provide a high-throughput gene screening both in vitro and in vivo.

Local toxicity of hepatic arterial infusion of hexokinase II inhibitor, 3-bromopyruvate: In vivo investigation in normal rabbit model.

RATIONALE AND OBJECTIVES: 3-Bromopyruvate (3-BrPA), an hexokinase II inhibitor, is known to have high necrotic rate in hyperglycolytic liver tumor models without apparent damage to the normal liver parenchyma. The toxicity of intra-arterial delivery of 3-BrPA in various concentrations has not been specifically investigated using a normal rabbit model. MATERIALS AND METHODS: Twenty rabbits treated with intra-arterial 3-BrPA were divided into four groups according to its dose and infusion level: 1 mM at the left hepatic artery (group I), 5 mM at the left hepatic artery (group II), 25 mM at the left hepatic artery (group III), and 25 mM at the common hepatic artery (group IV). After selective catheterization, 30 ml of 3-BrPA was infused for 2 minutes. As a control group, five rabbits were treated with normal saline. During 1-week follow-up, toxicities were evaluated with blood laboratory results, mortality, and histopathologic examination. RESULTS: All 10 rabbits treated with 25 mM 3-BrPA and 2 rabbits treated with 5 mM 3-BrPA died within 3 days after treatment. In 10 of the 12 deaths, hemorrhagic pyloric or duodenal necrosis was noted. Hepatotoxicities on blood laboratory results were dose dependent but transient in the surviving rabbits. CONCLUSION: Selective intra-arterial administration of 25 mM 3-BrPA can cause considerable toxicities not only in the liver but also in the gastrointestinal system and are dose dependent and can cause death in high doses.

Assessment of lymph node metastases by contrast-enhanced MR imaging in a head and neck cancer model.

OBJECTIVE: We wanted to investigate the accuracy of contrast-enhanced MR imaging for the detection of lymph node metastases in a head and neck cancer rabbit model. MATERIALS AND METHODS: The metastatic lymph node model we used was created by inoculating VX2 tumors into the auricles of six New Zealand White rabbits. T1-weighted MR images were obtained before and after injecting gadopentetate dimeglumine at three weeks after tumor cell inoculation. The sizes, signal intensity ratios (i.e., the postcontrast signal intensities of the affected nodes relative to the adjacent muscle) and the enhancement patterns of 36 regional lymph nodes (parotid and caudal mandibular nodes) were evaluated on MR images and then compared with the histopathologic findings. RESULTS: No statistical difference was found between the sizes of 12 metastatic (10.5+/-3.2 mm) and 24 hyperplastic (8.0+/-3.6 mm) lymph nodes (p > 0.05). On the contrast-enhanced T1-weighted MR images, nine metastatic and four hyperplastic lymph nodes had peripheral high and central low signal intensity, whereas three metastatic and 20 hyperplastic lymph nodes had homogeneous high signal intensity. Using a signal intensity ratio less than one as a diagnostic criterion for a metastatic lymph node, the sensitivity, specificity and positive and negative predictive values of the enhanced MR images were 75% (9/12), 83% (20/24), 69% (9/13) and 87% (20/23), respectively, with areas under receiver-operating-characteristic curve values of 0.81. CONCLUSION: This experimental study confirms that metastatic and hyperplastic lymph nodes can be differentiated using MR images on the basis of the contrast uptake patterns, but that they cannot be differentiated using any particular size criteria.

Thoracolumbar Paraspinal Myonecrosis after Aortic Dissection.

Thoracolumbar paraspinal myonecrosis can be developed with various etiologies. It can induce compartment syndrome of spinal muscles and cause elevated pressure on back muscles, resulting in severe back pain. Thoracolumbar paraspinal myonecrosis is a very rare disease. There are only a few studies about paraspinal myonecrosis. Here we report a case of a spontaneous thoracolumbar paraspinal myonecrosis in a patient who had asymptomatic abdominal aortic dissection. Through this case, etiologies, clinical features, radiologic findings, and treatment options for thoracolumbar paraspinal myonecrosis are discussed.

Physicochemical properties and sensory evaluation of mandarin (Citrus unshiu) beverage powder spray-dried at different inlet air temperatures with different amounts of a mixture of maltodextrin and corn syrup.

This study aimed to investigate the effects of varying mixtures of maltodextrin and corn syrup on the physicochemical characteristics and sensory evaluation results of mandarin beverage powder under different spay drying conditions including inlet air temperature and concentration of carrier agents. Higher inlet air temperatures increase in the a* value, pH, and WSI while decreasing the moisture content, L* value, b* value, vitamin C content, and bulk density. Increasing carrier agent concentration caused increases in the L* value and pH along with decreases in the moisture content, a* value, b* value, WSI, vitamin C content and bulk density. Water activity and WAI showed no significant differences among samples. Drying yield was maximized when the inlet air temperature reached 135°C and the carrier agent concentration was 35%. In sensory evaluation, as the concentration of the carrier agents increased, the taste received a higher preference rating, while the color was less preferred.