RESUMO
The generally nonpolar SrTiO3 has attracted more attention recently because of its possibly induced novel polar states and related paraelectric-ferroelectric phase transitions. By using controlled pulsed laser deposition, high-quality, ultrathin, and strained SrTiO3 layers were obtained. Here, transmission electron microscopy and theoretical simulations have unveiled highly polar states in SrTiO3 films even down to one unit cell at room temperature, which were stabilized in the PbTiO3/SrTiO3/PbTiO3 sandwich structures by in-plane tensile strain and interfacial coupling, as evidenced by large tetragonality (â¼1.05), notable polar ion displacement (0.019 nm), and thus ultrahigh spontaneous polarization (up to â¼50 µC/cm2). These values are nearly comparable to those of the strong ferroelectrics as the PbZrxTi1-xO3 family. Our findings provide an effective and practical approach for integrating large strain states into oxide films and inducing polarization in nonpolar materials, which may broaden the functionality of nonpolar oxides and pave the way for the discovery of new electronic materials.
RESUMO
Antiferroelectrics characterized by voltage-driven reversible transitions between antiparallel and parallel polarity are promising for cutting-edge electronic and electrical power applications. Wide-ranging explorations revealing the macroscopic performances and microstructural characteristics of typical antiferroelectric systems have been conducted. However, the underlying mechanism has not yet been fully unraveled, which depends largely on the atomistic processes. Herein, based on atomic-resolution transmission electron microscopy, the deterministic phase transition pathway along with the underlying lattice-by-lattice details in lead zirconate thin films was elucidated. Specifically, we identified a new type of ferrielectric-like dipole configuration with both angular and amplitude modulations, which plays the role of a precursor for a subsequent antiferroelectric to ferroelectric transformation. With the participation of the ferrielectric-like phase, the phase transition pathways driven by the phase boundary have been revealed. We provide new insights into the consecutive phase transformation in low-dimensional lead zirconate, which thus would promote potential antiferroelectric-based multifunctional devices.
RESUMO
Polar topologies have received extensive attention due to their exotic configurations and functionalities. Understanding their responsive behaviors to external stimuli, especially thermal excitation, is highly desirable to extend their applications to high temperature, which is still unclear. Here, combining in situ transmission electron microscopy and phase-field simulations, the thermal dynamics of the flux-closure domains were illuminated in PbTiO3/SrTiO3 multilayers. In-depth analyses suggested that the topological transition processes from a/c domains to flux-closure quadrants were influenced by the boundary conditions of PbTiO3 layers. The symmetrical boundary condition stabilized the flux-closure domains at higher temperature than in the asymmetrical case. Furthermore, the reversible thermal responsive behaviors of the flux-closure domains displayed superior thermal stability, which maintained robust up to 450 °C (near the Curie temperature). This work provides new insights into the dynamics of polar topologies under thermal excitation and facilitates their applications as nanoelectronics under extreme conditions.
RESUMO
Ferroelectrics hold promise for sensors, transducers, and telecommunications. With the demand of electronic devices scaling down, they take the form of nanoscale films. However, the polarizations in ultrathin ferroelectric films are usually reduced dramatically due to the depolarization field caused by incomplete charge screening at interfaces, hampering the integrations of ferroelectrics into electric devices. Here, we design and fabricate a ferroelectric/multiferroic PbTiO3/BiFeO3 system, which exhibits discontinuities in both chemical valence and ferroelectric polarization across the interface. Aberration-corrected scanning transmission electron microscopic study reveals an 8% elongation of out-of-plane lattice spacing associated with 104%, 107%, and 39% increments of δTi, δO1, and δO2 in the PbTiO3 layer near the head-to-tail polarized interface, suggesting an over â¼70% enhancement of polarization compared with that of bulk PbTiO3. Besides that in PbTiO3, polarization in the BiFeO3 is also remarkably enhanced. Electron energy loss spectrum and X-ray photoelectron spectroscopy investigations demonstrate the oxygen vacancy accumulation as well as the transfer of Fe3+ to Fe2+ at the interface. On the basis of the polar catastrophe model, FeO2/PbO interface is determined. First-principles calculation manifests that the oxygen vacancy at the interface plays a predominate role in inducing the local polarization enhancement. We propose a charge transfer mechanism that leads to the remarkable polarization increment at the PbTiO3/BiFeO3 interface. This study may facilitate the development of nanoscale ferroelectric devices by tailing the coupling of charge and lattice in oxide heteroepitaxy.
RESUMO
Ferroelectric flux-closures are very promising in high-density storage and other nanoscale electronic devices. To make the data bits addressable, the nanoscale flux-closures are required to be periodic via a controlled growth. Although flux-closure quadrant arrays with 180° domain walls perpendicular to the interfaces (V-closure) have been observed in strained ferroelectric PbTiO3 films, the flux-closure quadrants therein are rather asymmetric. In this work, we report not only a periodic array of the symmetric flux-closure quadrants with 180° domain walls parallel to the interfaces (H-closure) but also a large scale alternative stacking of the V- and H-closure arrays in PbTiO3/SrTiO3 multilayers. On the basis of a combination of aberration-corrected scanning transmission electron microscopic imaging and phase field modeling, we establish the phase diagram in the layer-by-layer two-dimensional arrays versus the thickness ratio of adjacent PbTiO3 films, in which energy competitions play dominant roles. The manipulation of these flux-closures may stimulate the design and development of novel nanoscale ferroelectric devices with exotic properties.
RESUMO
The properties of two-dimensional (2D) materials such as graphene and monolayer transition metal dichalcogenides are strongly influenced by domain boundaries. Ultrathin transition metal carbides are a class of newly emerging 2D materials that are superconducting and have many potential applications such as in electrochemical energy storage, catalysis, and thermoelectric energy conversion. However, little is known about their domain structure and the influence of domain boundaries on their properties. Here we use atomic-resolution scanning transmission electron microscopy combined with large-scale diffraction-filtered imaging to study the microstructure of chemical vapor deposited high-quality 2D α-Mo2C superconducting crystals of different regular shapes including triangles, rectangles, hexagons, octagons, nonagons, and dodecagons. The Mo atom sublattice in all these crystals has a uniform hexagonal closely packed arrangement without any boundaries. However, except for rectangular and octagonal crystals, the C atom sublattices are composed of three or six domains with rotational-symmetry and well-defined line-shaped domain boundaries because of the presence of three equivalent off-center directions of interstitial carbon atoms in Mo octahedra. We found that there is very small lattice shear strain across the domain boundary. In contrast to the single sharp transition observed in single-domain crystals, transport studies across domain boundaries show a broad resistive superconducting transition with two distinct transition processes due to the formation of localized phase slip events within the boundaries, indicating a significant influence of the boundary on 2D superconductivity. These findings provide new understandings on not only the microstructure of 2D transition metal carbides but also the intrinsic influence of domain boundaries on 2D superconductivity.
RESUMO
Transition metal carbides (TMCs) are a large family of materials with many intriguing properties and applications, and high-quality 2D TMCs are essential for investigating new physics and properties in the 2D limit. However, the 2D TMCs obtained so far are chemically functionalized, defective nanosheets having maximum lateral dimensions of â¼10 µm. Here we report the fabrication of large-area high-quality 2D ultrathin α-Mo2C crystals by chemical vapour deposition (CVD). The crystals are a few nanometres thick, over 100 µm in size, and very stable under ambient conditions. They show 2D characteristics of superconducting transitions that are consistent with Berezinskii-Kosterlitz-Thouless behaviour and show strong anisotropy with magnetic field orientation; moreover, the superconductivity is also strongly dependent on the crystal thickness. Our versatile CVD process allows the fabrication of other high-quality 2D TMC crystals, such as ultrathin WC and TaC crystals, which further expand the large family of 2D materials.
RESUMO
The controlled growth of large-area, high-quality, single-crystal graphene is highly desired for applications in electronics and optoelectronics; however, the production of this material remains challenging because the atomistic mechanism that governs graphene growth is not well understood. The edges of graphene, which are the sites at which carbon accumulates in the two-dimensional honeycomb lattice, influence many properties, including the electronic properties and chemical reactivity of graphene, and they are expected to significantly influence its growth. We demonstrate the growth of single-crystal graphene domains with controlled edges that range from zigzag to armchair orientations via growth-etching-regrowth in a chemical vapor deposition process. We have observed that both the growth and the etching rates of a single-crystal graphene domain increase linearly with the slanted angle of its edges from 0° to â¼19° and that the rates for an armchair edge are faster than those for a zigzag edge. Such edge-structure-dependent growth/etching kinetics of graphene can be well explained at the atomic level based on the concentrations of the kinks on various edges and allow the evolution and control of the edge and morphology in single-crystal graphene following the classical kinetic Wulff construction theory. Using these findings, we propose several strategies for the fabrication of wafer-sized, high-quality, single-crystal graphene.
RESUMO
Domain walls affect significantly ferroelectric and magnetic properties of magnetoelectric multiferroics. The stereotype is that the ferroelectric polarization will reduce at the domain walls due to the incomplete shielding of depolarization field or the effects of gradient energy. By combining transmission electron microscopy and first-principles calculations, we demonstrate that the ferroelectric polarization of tail-to-tail 180° domain walls in ε-Fe2O3 is regulated by the bound charge density. A huge enhancement (43%) of ferroelectric polarization is observed in the type I domain wall with a low bound charge density, while the ferroelectric polarization is reduced to almost zero at the type II domain wall with a high bound charge density. The magnetic coupling across the type I and type II ferroelectric domain walls are antiferromagnetic and ferromagnetic, respectively. Revealing mechanisms for enhancing ferroelectric polarization and magnetic behaviors at ferroelectric domain walls may promote the fundamental research and potential applications of magnetoelectric multiferroics.
RESUMO
Topological domain structures have drawn great attention as they have potential applications in future electronic devices. As an important concept linking the quantum and classical magnetism, a magnetic Bloch point, predicted in 1960s but not observed directly so far, is a singular point around which magnetization vectors orient to nearly all directions. Here we show polar Bloch points in tensile-strained ultrathin ferroelectric PbTiO3 films, which are alternatively visualized by phase-field simulations and aberration-corrected scanning transmission electron microscopic imaging. The phase-field simulations indicate local steady-state negative capacitance around the Bloch points. The observation of polar Bloch points and their emergent properties consequently implies novel applications in future integrated circuits and low power electronic devices.
RESUMO
Metal atomic chain (MAC) is an ultimate one-dimensional structure with unique physical properties, such as quantized conductance, colossal magnetic anisotropy, and quantized magnetoresistance. Therefore, MACs show great potential as possible components of nanoscale electronic and spintronic devices. However, MACs are usually suspended between two macroscale metallic electrodes; hence obvious technical barriers exist in the interconnection and integration of MACs. Here we report a carbon nanotube (CNT)-clamped MAC, where CNTs play the roles of both nanoconnector and electrodes. This nanostructure is prepared by in situ machining a metal-filled CNT, including peeling off carbon shells by spatially and elementally selective electron beam irradiation and further elongating the exposed metal nanorod. The microstructure and formation process of this CNT-clamped MAC are explored by both transmission electron microscopy observations and theoretical simulations. First-principles calculations indicate that strong covalent bonds are formed between the CNT and MAC. The electrical transport property of the CNT-clamped MAC was experimentally measured, and quantized conductance was observed.
Assuntos
Eletrodos , Metais/química , Nanotecnologia/instrumentação , Nanotubos de Carbono/química , Anisotropia , Condutividade ElétricaRESUMO
The period of polar domain (d) in ferroics was commonly believed to scale with corresponding film thicknesses (h), following the classical Kittel's law of d â [Formula: see text]. Here, we have not only observed that this relationship fails in the case of polar skyrmions, where the period shrinks nearly to a constant value, or even experiences a slight increase, but also discovered that skyrmions have further persisted in [(PbTiO3)2/(SrTiO3)2]10 ultrathin superlattices. Both experimental and theoretical results indicate that the skyrmion periods (d) and PbTiO3 layer thicknesses in superlattice (h) obey the hyperbolic function of d = Ah + [Formula: see text] other than previous believed, simple square root law. Phase-field analysis indicates that the relationship originates from the different energy competitions of the superlattices with PbTiO3 layer thicknesses. This work exemplified the critical size problems faced by nanoscale ferroelectric device designing in the post-Moore era.
Assuntos
Filmes CinematográficosRESUMO
Incoherent interfaces with large mismatches usually exhibit very weak interfacial interactions so that they rarely generate intriguing interfacial properties. Here we demonstrate unexpected strong interfacial interactions at the incoherent AlN/Al2O3 (0001) interface with a large mismatch by combining transmission electron microscopy, first-principles calculations, and cathodoluminescence spectroscopy. It is revealed that strong interfacial interactions have significantly tailored the interfacial atomic structure and electronic properties. Misfit dislocation networks and stacking faults are formed at this interface, which is rarely observed at other incoherent interfaces. The band gap of the interface reduces significantly to ~ 3.9 eV due to the competition between the elongated Al-N and Al-O bonds across the interface. Thus this incoherent interface can generate a very strong interfacial ultraviolet light emission. Our findings suggest that incoherent interfaces can exhibit strong interfacial interactions and unique interfacial properties, thereby opening an avenue for the development of related heterojunction materials and devices.
RESUMO
Materials with multiple order parameters, typically, in which ferroelectricity and magnetism are coupled, are illuminative for next-generation multifunctional electronics. However, searching for such single-phase multiferroics is challenging owing to antagonistic orbital occupancy and chemical bonding requirements for polarity and magnetism. Appropriate multiferroic candidates have been proposed, but their practical implementation is impeded by the low working temperature, weak coupling between ferroic orders, or antiparallel spin alignment in magnetic sublattices. Here, we report a family of single-phase multiferroic materials in which high-temperature magnetism and voltage-switchable ferroelectricity are coupled. Using pulsed laser deposition, we have fabricated single-crystalline thin films incorporating a uniformly percolated open-shell dn framework, which are composed of Fe cations with B-site occupancy and exhibit long-range spin ordering into the displacive ferroelectric PbTiO3 lattice, as demonstrated by atomically resolved chemical analysis. The tetragonal polar Pb(Ti1-x,Fex)O3 (PFT(x), x ≤ 0.10) family exhibits a switchable ferroelectric nature and magnetic interaction with a moderate coercive field of around 300 Oe at room temperature. Notably, the magnetic order even persists above 500 K, which is higher than already reported potential multiferroic candidates until now. Our strategy of merging a spin-ordered sublattice into inherent ferroelectrics via atomic occupancy engineering provides an available pathway for highly thermally stable multiferroic and spintronic applications.
RESUMO
Inducing clear ferroelectricity in the quantum paraelectric SrTiO3 is important for triggering methods to discover hidden phases in condensed matter physics. Several methods such as isotope substitution and freestanding membranes could introduce ferroelectricity in SrTiO3 toward nonvolatile memory applications. However, the stable transformation from quantum paraelectric SrTiO3 to ferroelectricity SrTiO3 at room temperature still remains challenging. Here, we used multiple nano-engineering in (SrTiO3)0.65/(CeO2)0.35 films to achieve an emergent room-temperature ferroelectricity. It is shown that the CeO2 nanocolumns impose large out-of-plane strains and induce Sr/O deficiency in the SrTiO3 matrix to form a clear tetragonal structure, which leads to an apparent room-temperature ferroelectric polarization up to 2.5 µC/cm2. In collaboration with density functional theory calculations, it is proposed that the compressive strains combined with elemental deficiency give rise to local redistribution of charge density and orbital order, which induce emergent tetragonality of the strained SrTiO3. Our work thus paves a pathway for architecting functional systems in perovskite oxides using a multiple nano-design.
RESUMO
Physical aging is a long-lasting research hot spot in the glass community, yet its long-term effects remain unclear because of the limited experimental time. In this study, we discover the extraordinary aging effects in five typical lunar glassy particles with diameters ranging from about 20 to 53 micrometers selected from Chang'e-5 lunar regolith. It is found that geological time scales' aging can lead to unusually huge modulus enhancements larger than 73.5% while much weaker effects on hardness (i.e., varies decoupling evolutions of Young's modulus and hardness during aging) in these lunar glassy samples. Such extraordinary aging effects are primarily attributed to the natural selected complex glassy compositions and structures, consistent with high entropy and minor element doping criteria, prevailing under the special lunar conditions and the extensive aging time for the lunar glasses. This study offers valuable insights for developing high-performance and stable glassy materials for radiation protection and advanced space explorations.
RESUMO
Manipulating ferroic orders and realizing their coupling in multiferroics at room temperature are promising for designing future multifunctional devices. Single external stimulation has been extensively proved to demonstrate the ability of ferroelastic switching in multiferroic oxides, which is crucial to bridge the ferroelectricity and magnetism. However, it is still challenging to directly realize multi-field-driven magnetoelectric coupling in multiferroic oxides as potential multifunctional electrical devices. Here, novel magneto-electric-optical coupling in multiferroic BiFeO3 -based thin films at room temperature mediated by deterministic ferroelastic switching using piezoresponse/magnetic force microscopy and aberration-corrected transmission electron microscopy are shown. Reversible photoinduced ferroelastic switching exhibiting magnetoelectric responses is confirmed in BiFeO3 -based films, which works at flexible strain states. This work directly demonstrates room-temperature magneto-electric-optical coupling in multiferroic films, which provides a framework for designing potential multi-field-driven magnetoelectric devices such as energy conservation memories.
RESUMO
High magnetic order temperature, sustainable polar insulating state, and tolerance to device integrations are substantial advantages for applications in next-generation spintronics. However, engineering such functionality in a single-phase system remains a challenge owing to the contradicted chemical and electronic requirements for polar nature and magnetism, especially with an ordering state highly above room temperature. Perovskite-related oxides with unique flexibility allow electron-unpaired subsystems to merge into the polar lattice to induce magnetic interactions, combined with their inherent asymmetry, thereby promising polar magnet design. Herein, by atomic-level composition assembly, a family of Ti/Fe co-occupied perovskite oxide films Pb(Ti1-x,Fex)O3 (PFT(x)) with a Ruddlesden-Popper superstructure are successfully synthesized on several different substrates, demonstrating exceptional adaptability to different integration conditions. Furthermore, second-harmonic generation measurements convince the symmetry-breaking polar character. Notably, a ferromagnetic ground state up to 600 K and a steady insulating state far beyond room temperature were achieved simultaneously in these films. This strategy of constructing layered modular superlattices in perovskite oxides could be extended to other strongly correlated systems for triggering nontrivial quantum physical phenomena.
RESUMO
Ferroelectric ultrathin films have great potential in electronic devices and device miniaturization with the innovation of technology. In the process of product commercialization, understanding the domain evolution and topological properties of ferroelectrics is a prerequisite for high-density storage devices. In this work, a series of ultrathin PbTiO3 (PTO) films with varying thicknesses were deposited on cubic KTaO3 substrates by pulsed laser deposition and were researched by Cs-corrected scanning transmission electron microscopy (STEM), reciprocal space mapping (RSM), and piezoresponse force microscopy (PFM). RSM experiments indicate the existence of a/c domains and show that the lattice constant varies continuously, which is further confirmed by atomic-scale STEM imaging. Diffraction contrast analysis clarifies that with the decrease in PTO film thickness, the critical thickness for the formation of a/c domains could be missing. When the thickness of PTO films is less than 6 nm, the domain configurations in the ultrathin PTO films are the coexistence of a/c domains and bowl-like topological structures, where the latter ones were identified as convergent and divergent types of meron. In addition, abundant 90° charged domain walls in these ultrathin PTO films were identified. PFM studies reveal clear ferroelectric properties for these ultrathin PTO films. These results may shed light on further understanding the domain evolution and topological properties in ultrathin ferroelectric PTO films.
RESUMO
Common pursuits of developing nanometric logic and neuromorphic applications have motivated intensive research studies into low-dimensional resistive random-access memory (RRAM) materials. However, fabricating resistive switching medium with inherent stability and homogeneity still remains a bottleneck. Herein, we report a self-assembled uniform biphasic system, comprising low-resistance 3 nm-wide (Bi0.4,La0.6)FeO3-δ nanosheets coherently embedded in a high-resistance (Bi0.2,La0.8)FeO3-δ matrix, which were spinodally decomposed from an overall stoichiometry of the (Bi0.24,La0.76)FeO3-δ parent phase, as a promising nanocomposite to be a stable and endurable RRAM medium. The Bi-rich nanosheets accommodating high concentration of oxygen vacancies as corroborated by X-ray photoelectron spectroscopy and electron energy loss spectroscopy function as fast carrier channels, thus enabling an intrinsic electroforming-free character. Surficial electrical state and resistive switching properties are investigated using multimodal scanning probe microscopy techniques and macroscopic I-V measurements, showing high on/off ratio (â¼103) and good endurance (up to 1.6 × 104 cycles). The established spinodal decomposition-driven phase-coexistence BLFO system demonstrates the merits of stability, uniformity, and endurability, which is promising for further application in RRAM devices.