Galectin-3 expression in thyroid fine needle cytology (t-FNAC) uncertain cases: validation of molecular markers and technology innovation.

Thyroid cancer is not very common, accounting for 1-2% of all cancers, with a population incidence of about 0.004%. Currently, the ability to discriminate between follicular adenoma and carcinoma represents the major challenge in preclinical diagnosis of thyroid proliferative lesions. Better discrimination between the two would help avoid unnecessary thyroidectomy and save valuable resources. Over the years, galectin-3 (Gal-3) has been proposed as a diagnostic marker with varied success. In this paper, we used Environmental Scanning Electron Microscopy Immunogold Labelling (ESEM-IGL) to investigate the expression of Gal-3 on Thin-Prep fine needle aspiration cytology (FNAC). We optimized the ESEM-IGL method on thyroid cell lines (RO-82 and FTC-133) comparing our membrane Gal-3 labeling data with Western blot. We evaluated 183 thyroid FNAC from Italian patients with a uncertain pre-surgical diagnosis. ESEM-IGL method marker sensitivity is 71.2%, while specificity is 53.3% and diagnostic efficacy is 61.2%. Our results confirmed that Gal-3 expression is associated with situations of hypertrophy and/or cellular hyperproliferation, pathophysiological situations common both to adenomas and to thyroid carcinomas. The innovation of thyroid FNAC Thin-Prep ESEM-IGL shows the levels of Gal-3 immunolabeling clearly, even through the individual cells of a thyroid nodule. However, Gal-3 alone, as a molecular marker of thyroid cancer, can still have a limited application in pre-surgery diagnosis.

Immunogold labelling in environmental scanning electron microscopy: applicative features for complementary cytological interpretation.

We have combined environmental scanning electron microscopy (ESEM) and immunogold labelling (IGL) for the analysis of cell morphology and surface protein detection on human fine needle aspiration, which is processed in thin uniform monolayer (a single layer of cells) on a glass slide by Thin Prep technology. Among scanning electron microscopy techniques, we choose the environmental modality (ESEM) because it allows a slight manipulation of biological samples and an operational time comparable with cytological techniques. Moreover, the Thin Prep technology confirmed a reproducible cell monolayer on glass smear, minimizing problems for the determination of appropriate amount of material per slide. The first experimental data in ESEM-IGL on biological samples with fine needle aspiration Thin Prep, in human thyroid nodules, showed that cells retained their morphology and provided a clear IGL. The optimization of conditions (i.e. vacuum pressure, temperature and relative humidity) confirmed the possibility to observe an immunolabelled biological sample and morphological signal, joined with compositional informations, due to peculiar characteristics of gaseous secondary electron detector in ESEM. The ESEM-IGL and fine needle aspiration Thin Prep could be used in combination for the interpretation of cell morphology and cell surface immunolabelling. Our paper suggests this use as a powerful diagnostic tool in a pre-surgical evaluations, opening a new applicative window for electron microscopy.

Saccharomyces boulardii: a summary of the evidence for gastroenterology clinical practice in adults and children.

Probiotics are viable, nonpathogenic microorganisms (bacteria or yeast) which when administered in adequate amounts, confer a health benefit on the host. At this time, Saccharomyces boulardii is the only yeast commonly used in clinical practice. Literature on this probiotic is wide and even more data become available each year. Thus, it could be problematic for a physician summarize all the best information deriving from basic research and clinical studies. With the aim to help physicians in the use of Saccharomyces boulardii, this paper focuses on the available evidences for its efficacy and safety in different diseases in adult and pediatric patients in order to provide a practical guidance for gastroenterology clinical practice. Indications and dosage for several gastrointestinal diseases for a correct use of this probiotic are provided, and recent insights on its mechanisms of action and possible future clinical application are also discussed.

[Tissue engineering of parathyroid gland]. / L'ingegnerizzazione tissutale delle cellule paratiroidee.

BACKGROUND: The postoperative hypoparathyroidism is a not rare complication after total thyroidectomy and/or total parathyroidectomy. Attempts to transplant parathyroid tissue began in 1975 with the work of Wells, but still today results are disappointing. However, with the development of tissue engineering techniques, some experimental approaches to build artificial parathyroid are been made. Bioengineered device, actively secreting PTH, for transplant in patients with iatrogenic hypoparathyroidism is unavailable. PATIENTS AND METHODS: Parathyroid cells were obtained from three chronic uremic patients in hemodialysis, operated for secondary hyperparathyroidism. Cell cultures in RPMI medium were subsequently seeded on collagen scaffold (three-dimensional matrix with slow biodegradation). Collagen is the major component of the extracellular matrix and thus is a good substrate for cell adhesion and growth. Culture media, with a low calcium concentration, were optimised to physiologically stimulate parathyroid hormone secretion. Cell cultures were morphologically observed in optical and electron (ESEM) microscopy and metabolically assayed by MTT method until the tenth week. Besides, concentration of parathyroid hormone in the culture medium has been measured for several weeks. RESULTS: After 24 hours of culture in RPMI, cells extracted from human parathyroid glands were nearly all adherent and organised in clusters to resemble the glandular organization. The cellular population consisted predominantly of parathyroid cells (90-95%). On collagen scaffolds, cells maintains an epithelial-like morphology also after 10 weeks, colonizing the scaffold surface and keeping a good proliferative rate with a discrete production of parathyroid hormone. CONCLUSION: The use of parathyroid cells extracted from patients with secondary hyperparathyroidism was certainly an appropriate choice that enabled us to achieve these results, that albeit partial bode well for the experimental in vivo animal model. The bioengineered scaffolds when implanted in the subcutaneous can avoid the dispersion of parathyroid cells, assuring also the possibility to easily remove the implant in case of complications. Our research was aimed primarily to the optimisation of PTH secreting human parathyroid cells cultures and then to the in vitro engineering of human parathyroid glands in three-dimensional collagen scaffolds.

Coatings of titanium substrates with xCaO · (1 - x)SiO2 sol-gel materials: characterization, bioactivity and biocompatibility evaluation.

The objective of this study has been to develop low temperature sol-gel coatings to modify the surface of commercially pure titanium grade 4 (a material generally used in dental application) and to evaluate their bioactivity and biocompatibility on the substrate. Glasses of composition expressed by the following general formula xCaO · (1 - x)SiO2 (0.0

Biological influence of Ca/P ratio on calcium phosphate coatings by sol-gel processing.

The objective of this work has been to develop low temperature sol-gel glass coatings to modify the substrate surface and to evaluate their bioactivity and biocompatibility. Glasses, based on SiO2·CaO·P2O5, were synthesized by the sol-gel technique using tetraethyl orthosilicate, calcium nitrate tetrahydrate and triethyl phosphate as precursors of SiO2, CaO and P2O5, respectively. Those materials, still in the sol phase, have been used to coat substrates by means of the dip-coating technique. Attenuated total reflectance Fourier transform infrared (ATR-FTIR) has been used for characterize coatings and a microstructural analysis has been obtained using scanning electron microscopy (SEM). The potential applications of the coatings in the biomedical field were evaluated by bioactivity and biocompatibility tests. The coated substrate was immersed in simulated body fluid (SBF) for 21days and the hydroxyapatite deposition on its surface was subsequently evaluated via SEM-EDXS analysis, as an index of bone-bonding capability. In order to study the cell behavior and response to our silica based materials, prepared via the sol-gel method, with various Ca/P ratio and coating substrate, we have used the human osteoblast-like U2OS cell line.

Investigation of bioactivity, biocompatibility and thermal behavior of sol-gel silica glass containing a high PEG percentage.

SiO2/PEG organic-inorganic hybrid materials, which contain 60 or 70 weight percentage of PEG, were synthesized by the sol-gel technique. The materials were characterized and subjected to various tests to assess their application in the biomedical field. The evaluation of their morphology by scanning electron microscopy (SEM) confirms the homogeneity of the samples on the nanometer scale. Fourier transform infrared spectroscopy (FT-IR) indicated that the two components of the hybrids (SiO2 and PEG) are linked by hydrogen bonds. This feature makes them class I hybrids. Simultaneous thermogravimetry/differential thermal analysis (TG/DTA) was used to investigate their thermal behavior and to establish the best temperatures for their pre-treatment. The fundamental properties that a material must have to be used in the biomedical field are biocompatibility and bioactivity. The formation of a hydroxyapatite layer was observed on the hybrid surface by SEM/EDX and FTIR after soaking in simulated body fluid. This indicates that the materials are able to bond to bone tissue. Moreover, the biocompatibility of SiO2/PEG hybrids was assessed by performing WST-8 cytotoxicity tests on fibroblast cell NIH 3T3 after 24h of exposure. The cytotoxicity tests highlight that the cell viability is affected by the polymer percentage. The results showed that the synthesized materials were bioactive and biocompatible. Therefore, the results obtained are encouraging for the use of the obtained hybrids in dental or orthopedic applications.

Silica-polyethylene glycol hybrids synthesized by sol-gel: Biocompatibility improvement of titanium implants by coating.

Although metallic implants are the most used in dental and orthopaedic fields, they can early fail due to low tissue tolerance or osseointegration ability. To overcome this drawback, functional coatings can be applied on the metallic surface to provide a firm fixation of the implants. The objective of the present study was twofold: to synthesize and to characterize silica/polyethylene glycol (PEG) hybrid materials using sol-gel technique and to investigate their capability to dip-coat titanium grade 4 (Ti-gr4) substrates to improve their biological properties. Various hybrid systems have been synthesized by changing the ratio between the organic and inorganic phases in order to study the influence of the polymer amount on the structure and, thus, on the properties of the coatings. Fourier transform infrared (FTIR) spectroscopy and solid state Nuclear Magnetic Resonance (NMR) allowed us to detect the formation of hydrogen bonds between the inorganic sol-gel matrix and the organic component. SEM analysis showed that high PEG content enables to obtain crack free-coating. Moreover, the effective improvement in biological properties of Ti-gr4 implants has been evaluated by performing in vitro tests. The bioactivity of the hybrid coatings has been showed by the hydroxyapatite formation on the surface of SiO2/PEG coated Ti-gr4 substrates after soaking in a simulated body fluid and the lack of cytotoxicity by the WST-8 Assay. The results showed that the coated substrates are more bioactive and biocompatible than the uncoated ones and that the bioactivity is not significantly affected by PEG amount whereas its addition makes the films more biocompatible.

TiO2/PCL hybrid materials synthesized via sol-gel technique for biomedical applications.

The aim of the present work has been the synthesis of organic/inorganic hybrid materials based on titanium dioxide and poly(ε-caprolactone) (PCL) to be used in the biomedical field. Several materials have been synthesized using sol-gel methods by adding different amounts of polymer to the inorganic sol. The obtained gels have been characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM) and atomic force microscopy (AFM). The FT-IR data allowed us to hypothesize that the structure formed was that of an interpenetrating network, realized by hydrogen bonds between TiOH groups in the sol-gel intermediate species and carbonyl groups in the polymer repeating units. SEM and AFM analyses highlighted that the obtained materials were nanostructurated hybrids. To evaluate the biological properties of the hybrids, their bioactivity and cytotoxicity were investigated as a function of the PCL amount. The bioactivity of the synthesized systems was proven by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating human blood plasma (SBF). MTT cytotoxicity tests and Trypan Blue dye exclusion tests were carried out exposing NIH-3T3 mouse embryonic fibroblasts for 24 and 48h to extracts from the investigated hybrid materials. The results showed that all the hybrids had a non-cytotoxic effect on target cells.

Influence of the polymer amount on bioactivity and biocompatibility of SiO2/PEG hybrid materials synthesized by sol-gel technique.

SiO2/PEG organic-inorganic hybrid materials, which differ in polyethylene glycol (PEG) content, were synthesized by sol-gel technique and the characterization of their structure and biological properties was carried out in order to evaluate the possible use in biomedical field. FT-IR spectroscopy detected that the two components of the hybrids (SiO2 and PEG) are linked by hydrogen bonds between the Si-OH groups of the inorganic phase and the terminal alcoholic groups and/or the ethereal oxygen atoms in the repeating units of polymer. X-ray diffraction analysis ascertained the amorphous nature of the gels and the observation of their morphology by SEM microscopy confirmed that the interpenetration of the two phases (organic and inorganic) occurs on nanometric scale. The biological characterization was carried out as a function of the polymer amount to study its influence on material behavior. The results showed that the synthesized materials were bioactive and biocompatible. The formation of a hydroxyapatite layer, indeed, was observed on their surface by SEM/EDX analysis after soaking in simulated body fluid. Moreover, the biocompatibility of SiO2/PEG hybrids was assessed performing MTT and SRB cytotoxicity tests on fibroblast cell NIH 3T3 after 24 and 48h of exposure, as well as Trypan Blue dye exclusion test. The response to the presence of the investigated materials was positive. The cell growth and proliferation showed dependence on polymer amount and time of exposure to the material extracts. Therefore, the obtained results are encouraging for the use of the obtained hybrids in dental or orthopedic applications.

Biocompatibility improvement of titanium implants by coating with hybrid materials synthesized by sol-gel technique.

Organic-inorganic hybrid materials based on zirconia and polyethylene glycol (PEG) have been synthesized via sol-gel method in the present study. Those materials, still in the sol phase, have been used to coat a titanium grade 4 (Ti-4) substrate to improve its biological properties. Dip-coating technique has been used to obtain thin films. PEG, a biocompatible polymer, used as the organic phase, has been incorporated with different percentages in an inorganic zirconium-based matrix. Those hybrids have been characterized by Fourier transform infrared spectroscopy (FTIR) to detect interactions between the two phases. The films have been examined using SEM to detect morphological changes with PEG percentages. The potential applications of the hybrid coatings in biomedical field have been evaluated by bioactivity and cytotoxicity tests. The coated titanium was immersed in simulated body fluid (SBF) for 21 days and the hydroxyapatite deposition on its surface was subsequently evaluated, as that feature can be used as an index of bone-bonding capability. SEM equipped with energy dispersive spectrometer (EDS) was used to examine hydroxyapatite formation. NIH 3T3 mouse embryonic fibroblast cells were seeded on specimens to evaluate cells-materials interactions and cell vitality was inspected using WST-8 Assay.

Investigation of the sample preparation and curing treatment effects on mechanical properties and bioactivity of silica rich metakaolin geopolymer.

In many biomedical applications both the biological and mechanical behaviours of implants are of relevant interest; in the orthopaedic field, for example, favourable bioactivity and biocompatibility capabilities are necessary, but at the same time the mechanical characteristics of the implants must be such as to allow one to support the body weight. In the present work, the authors have examined the application of geopolymers with composition H24AlK7Si31O79 and ratio Si/Al=31 to be used in biomedical field, considering two different preparation methods: one of the activators (KOH) has been added as pellets in the potassium silicate solution, in the other as a water solution with 8M concentration. Moreover, a different water content was used and only some of the synthesized samples were heat treated. The chemical and microstructural characterizations of those materials have been carried out by Fourier transform infrared spectroscopy (FT-IR) and scanning electron microscopy (SEM). Subsequently, the effects of the adopted preparation on the mechanical and biological properties have been studied: compressive strength tests have demonstrated that more fragile specimens were obtained when KOH was added as a solution. The bioactivity was successfully evaluated with the soaking of the samples in a simulated body fluid (SBF) for 3 weeks. The formation of a layer of hydroxyapatite on the surface of the materials has been shown both by SEM micrographs and EDS analyses.

Corrosion behavior and mechanical properties of bioactive sol-gel coatings on titanium implants.

Organic-inorganic hybrid coatings based on zirconia and poly (ε-caprolactone) (PCL) were prepared by means of sol-gel dip-coating technique and used to coat titanium grade 4 implants (Ti-4) in order to improve their wear and corrosion resistance. The coating chemical composition has been analysed by ATR-FTIR. The influence of the PCL amount has been investigated on the microstructure, mechanical properties of the coatings and their ability to inhibit the corrosion of titanium. SEM analysis has shown that all coatings have a nanostructured nature and that the films with high PCL content are crack-free. Mechanical properties of the coatings have been studied using scratch and nano-indentation tests. The results have shown that the Young's modulus of the coatings decreases in presence of large amounts of the organic phase, and that PCL content affects also the adhesion of the coatings to the underlying Ti-4 substrate. However, the presence of cracks on the PCL-free coatings affects severely the mechanical response of the samples at high loads. The electrochemical behavior and corrosion resistance of the coated and uncoated substrate has been investigated by polarization tests. The results have shown that both the coatings with or without PCL don't affect significantly the already excellent passivation properties of titanium.

Biological evaluation of zirconia/PEG hybrid materials synthesized via sol-gel technique.

The objective of the following study has been the synthesis via sol-gel and the characterization of novel organic-inorganic hybrid materials to be used in biomedical field. The prepared materials consist of an inorganic zirconia matrix containing as organic component the polyethylene glycol (PEG), a water-soluble polymer used in medical and pharmaceutical fields. Various hybrids have been synthesized changing the molar ratio between the organic and inorganic parts. Fourier transform spectroscopy suggests that the structure of the interpenetrating network is realized by hydrogen bonds between the Zr-OH group in the sol-gel intermediate species and both the terminal alcoholic group and ethereal oxygen atoms in the repeating units of polymer The amorphous nature of the gels has been ascertained by X-ray diffraction analysis. The morphology observation has been carried out by using the Scanning Electron Microscope and has confirmed that the obtained materials are nanostructurated hybrids. The bioactivity of the synthesized system has been shown by the formation of a hydroxyapatite layer on the surface of samples soaked in a fluid simulating the human blood plasma. The potential biocompatibility of hybrids has been assessed as performing indirect MTT cytotoxicity assay towards 3T3 cell line at 24, 48, and 72 h exposure times.

Synthesis of zirconia/polyethylene glycol hybrid materials by sol-gel processing and connections between structure and release kinetic of indomethacin.

Controlled and local drug delivery systems of anti-inflammatory agents are attracting an increasing attention because of their extended therapeutic effect and reduced side effects. In this work, the sol-gel process was used to synthesize zirconia/polyethylene glycol (ZrO2/PEG) hybrid materials containing indomethacin for controlled drug delivery. Different percentages of PEG were introduced in the synthesis to modulate the release kinetic and an exhaustive chemical characterization of all samples was performed to detect the relationship between their structure and release ability. Fourier transform spectroscopy and solid-state NMR show that the Zr-OH groups of the inorganic matrix bond both the ethereal oxygen atoms of the polymer and the carboxylic groups of the drug. X-ray diffraction analysis ascertains the amorphous nature of those materials. Scanning electron microscopy detects the nanostructure and the homogeneous morphology of the synthesized materials. The bioactivity was demonstrated by the formation of a hydroxyapatite layer on the surface of the samples, after soaking in a simulated body fluid. The release kinetics study, performed by HPLC UV-Vis spectroscopy, proves that the release ability depends on PEG and the drug amount and also demonstrates the indomethacin integrity after the synthetic treatment.

Synthesis of SiO2 and CaO rich calcium silicate systems via sol-gel process: bioactivity, biocompatibility, and drug delivery tests.

Silica and calcium silicate amorphous materials, mixed with sodium ampicillin, a broad-spectrum antibiotic, have been synthesized by sol-gel method. The amorphous nature of the gels was ascertained by X-ray diffraction analysis. The bioactivity of the synthesized materials has been put into evidence by the appearance of a crystal of hydroxyapatite on the surface of the samples soaked in a fluid simulating the composition of the human blood plasma, as detected through FTIR measurements and SEM micrographs. The present work refers to a series of in-vitro biocompatibility tests, which has been performed on silicate and CaO rich calcium silicate gel-glasses, to study the cell behavior when seeded on 1 cm(2) material fragments, introduced into an in-vitro culture system. 3T3 cell lines have been used and the viability has been evaluated by WST-8 test. The composition of the adopted glasses can be expressed by the following general formula: x CaO• (1 - x) SiO2 with x = 0.00; 0.30; 0.40; 0.50; 0.60. Subsequently, release kinetics in a simulate body fluid (SBF) has been investigated. The amount of sodium ampicillin released has been detected by UV-Vis spectroscopy. The release kinetics has appeared to occur in more than one stage. All data have shown that those materials could be used as drug delivery bioactive systems.

Biological response of human mesenchymal stromal cells to titanium grade 4 implants coated with PCL/ZrO2 hybrid materials synthesized by sol-gel route: in vitro evaluation.

The surface modification of implantable materials in order to improve their biological proprieties, including tissue tolerance and osseointegration ability, by means of functional coating deposition is a promising strategy to provide a firm fixation of the implants. In this study, organic/inorganic hybrid materials consisting of an inorganic zirconia-based matrix, in which a biocompatible polymer, poly(ε-caprolactone) (PCL), has been incorporated at different percentages, have been synthesized via sol-gel route. Developed materials have been used to coat titanium grade 4 substrates by means of dip coating technique. Scanning electron microscopy (SEM) analysis of the obtained coatings has shown that films crack-free can be obtained for high levels of PCL. Chemical composition and interactions between organic and inorganic moieties have been studied by Attenuated Total Reflectance Fourier Transform InfraRed spectroscopy. The bone-bonding capability of the nanocomposite films has been evaluated in vitro by examining the appearance of an apatite layer on their surface when soaked in a simulated body fluid by means of SEM equipped with EDS microanalysis. In vitro biocompatibility assessment was performed in combination with human mesenchymal stromal cells (hMSCs). Materials were found to be non-toxic and supporting cell proliferation. Additionally, the coating material was not hampering the differentiation of hMSCs in an osteogenic medium.

The genetic ablation or pharmacological inhibition of TRPV1 signalling is beneficial for the restoration of quiescent osteoclast activity in ovariectomized mice.

BACKGROUND AND PURPOSE: Osteoporosis is a condition characterized by a decrease in bone density, which decreases its strength and results in fragile bones. The endocannabinoid/endovanilloid system has been shown to be involved in the regulation of skeletal remodelling. The aim of this study was to investigate the possible modulation of bone mass mediated by the transient receptor potential vanilloid type 1 channel (TRPV1) in vivo and in vitro. EXPERIMENTAL APPROACH: A multidisciplinary approach, including biomolecular, biochemical and morphological analysis, was used to investigate the involvement of TRPV1 in changes in bone density in vivo and osteoclast activity in vitro, in wild-type and Trpv1(-/-) mice, that had undergone ovariectomy or had a sham operation. KEY RESULTS: Genetic deletion of Trpv1 as well as pharmacological inhibition/desensitization of TRPV1 signalling dramatically reduced the osteoclast activity in vitro and prevented the ovariectomy-induced bone loss in vivo, whereas the expression of cannabinoid type 2 (CB2 ) receptors was increased. CONCLUSIONS AND IMPLICATIONS: These findings highlight the pivotal role TRPV1 channels play in bone resorption and suggest a possible cross-talk between TRPV1 and CB2 receptors. Based on these results, hybrid compounds acting on both TRPV1 and CB2 receptors in an opposite manner could provide a future pharmacological tool for the treatment of diseases associated with disturbances in the bone remodelling process.