RESUMO
Nuclear magnetic resonance is applied to investigate the relative positions and interactions between cationic and non-ionic carbohydrate-based surfactants in mixed micelles with D2 O as the solvent. This is accomplished by using relaxation measurements [spin-lattice (T1 ) and spin-spin (T2 ) analysis] and nuclear Overhauser effect spectroscopy (NOESY). This study focuses on the interactions of n-octyl ß-d-glucopyranoside (C8G1) and ß-d-xylopyranoside (C8X1) with the cationic surfactant hexadecyltrimethylammonium bromide (C16 TAB). Whereas the interactions between carbohydrate and cationic surfactants are thermodynamically favorable, the NOESY results suggest that both of the sugar head groups are located preferentially at the interior core of the mixed micelles, so that they are not directly exposed to the bulk solution. The more hydrophilic sugar headgroups of C8G1 have more mobility than sugar heads of C8X1 owing to increased hydration. Herein, an inverted carbohydrate configuration in mixed micelles is proposed for the first time and supported by fluorescence spectroscopy experiments. This inverted carbohydrate headgroup configuration would limit the use of these mixed surfactants when access to the carbohydrate headgroup is important, but may present new opportunities where the carbohydrate-rich core of the micelles can be exploited.
Assuntos
Compostos de Cetrimônio/química , Glicosídeos/química , Micelas , Tensoativos/química , Cátions/química , Cetrimônio , Espectrometria de Fluorescência , TermodinâmicaRESUMO
Selectively permeable biological membranes containing lipophilic barriers inspire the design of biomimetic carrier-mediated membranes for aqueous solute separation. The recovery of glucose, which can reversibly bind to boronic acid (BA) carriers, is examined in lipid pore-filled silica thin-film composite membranes with accessible mesopores. The successful incorporation of lipids (1,2-dipalmitoyl-sn-glycero-3-phosphocholine, DPPC) and BA carriers (4-((N-Boc-amino)methyl)phenylboronic acid, BAMP-BA) in the pores of mesoporous silica (â¼10 nm pore diameter) through evaporation deposition is verified by confocal microscopy and differential scanning calorimetry. In the absence of BA carriers, lipids confined inside the pores of silica thin films (â¼200 nm thick) provide a factor of 14 increase in diffusive transport resistance to glucose, relative to traditional supported lipid bilayers formed by vesicle fusion on the porous surface. The addition of lipid-immobilized BAMP-BA (59 mol % in DPPC) facilitates the transport of glucose through the membrane; glucose flux increases from 45 × 10-8 to 225 × 10-8 mol/m2/s in the presence of BAMP-BA. Furthermore, the transport can be improved by environmental factors including pH gradient (to control the binding and release of glucose) and temperature (to adjust lipid bilayer fluidity). The successful development of biomimetic nanocomposite membranes demonstrated here is an important step toward the efficient dilute aqueous solute upgrading or separations, such as the processing of carbohydrates from lignocellulose hydrolysates, using engineered carrier/catalyst/support systems.
Assuntos
Dióxido de Silício/química , Biomimética , Carboidratos , Bicamadas Lipídicas , Lipídeos , Fluidez de MembranaRESUMO
The mesostructure loss kinetics are measured as a function of the orientation of micelles in 2D hexagonal close packed (HCP) columnar mesostructured titania thin films using in situ grazing incidence small angle X-ray scattering (GISAXS). Complementary supporting information is provided by ex situ scanning electron microscopy. Pluronic surfactant P123 acts as the template to synthesize HCP structured titania thin films. When the glass substrates are modified with crosslinked P123, the micelles of the HCP mesophase align orthogonal to the films, whereas a mix of parallel and orthogonal alignment is found on unmodified glass. The rate of mesostructure loss of orthogonally oriented (o-HCP) thin films (â¼60 nm thickness) prepared on modified substrate is consistently found to be less by a factor of 2.5 ± 0.35 than that measured for mixed orientation HCP films on unmodified substrates. The activation energy for mesostructure loss is only slightly greater for films on modified glass (155 ± 25 kJ mol(-1)) than on unmodified (128 kJ mol(-1)), which implies that the rate difference stems from a greater activation entropy for mesostructure loss in o-HCP titania films. Nearly perfect orthogonal orientation of micelles on modified surfaces contributes to the lower rate of mesostructure loss by supporting the anisotropic stresses that develop within the films during annealing due to continuous curing, sintering and crystallization into the anatase phase during high temperature calcination (>450 °C). Because the film thickness dictates the propagation of orientation throughout the films and the degree of confinement, thicker (â¼250 nm) films cast onto P123-modified substrates have a much lower activation energy for mesostructure loss (89 ± 27 kJ mol(-1)) due to the mix of orientations found in the films. Thus, this kinetic study shows that thin P123-templated o-HCP titania films are not only better able to achieve good orthogonal alignment of the mesophase relative to thicker films or films on unmodified substrates, but that alignment of the mesophase in the films stabilizes the mesophase against thermally-induced mesostructure loss.
RESUMO
The transport properties of the ionic liquid (IL) 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM][PF6]) confined within silica microparticles with well-ordered, accessible mesopores (5.4 or 9 nm diameter) were investigated. [BMIM][PF6] confinement was confirmed by using differential scanning calorimetry (DSC) and Fourier transform infrared (FTIR) spectroscopy. The transport properties of the confined IL were studied using the neutral and cationic fluorescent probes 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM) and rhodamine 6G, respectively, through fluorescence recovery after photobleaching (FRAP) in confocal microscopy. The diffusivity of DCM in 9 nm pores is 0.026 ± 0.0091 µm2/s, which is 2 orders of magnitude less than in the bulk ionic liquid. The pore size did not affect the diffusivity of DCM in unmodified silica nanopores. The diffusivity of the cationic probe is reduced by 63% relative to that of the neutral probe. Diffusivity is increased with water content, where equilibrium hydration of the system leads to a 37% increase in DCM diffusivity. The most dramatic impact on diffusivity was caused by tethering an IL-like methylimidazolium chloride group to the pores, which increased the pore hydrophobicity and resulted in 3-fold higher diffusivity of DCM compared to bare silica pores. Subsequent exchange of the chloride anion from the tethering group with PF6- decreased the diffusivity to half that of bare silica. The diffusion of probe molecules is affected most strongly by the pore wall effects on probe interactions rather than by the pore size itself, which suggests that understanding pore wall diffusion is critical to the design of nanoconfined ILs for separations, catalysis, and energy storage.
RESUMO
In this quantum chemical investigation, NH(3) physisorption onto a model of copper sulfate impregnated silica is compared with pure silica and copper sulfate adsorbents. The physisorption process is modeled as direct binding of the NH(3) molecule to the adsorption site of the dry adsorbents and as displacement of a H(2)O molecule by NH(3) in the hydrated complexes. The surface of silica is represented by a hydroxyl group attached to a silsesquioxane cage, H(7)Si(8)O(12)(OH) and silica impregnated with CuSO(4) by the most stable configuration of the cluster containing a CuSO(4) ion pair placed adjacent to the silica cage. H(2)O is systematically added to the dehydrated adsorbents to investigate the role of water in NH(3) adsorption. Modeling hydrated environments of each type of adsorbent is focused on H(2)O molecules that directly coordinate with the active sites. The results indicate that the binding energy of adsorbing NH(3) onto the mixed adsorbent is greater than in pure silica. This enhanced binding in the mixed adsorbent is consistent with improved Brønsted acidity of the silanol in the presence of CuSO(4).
RESUMO
Polychlorinated biphenyls (PCBs) can be metabolized to reactive metabolites, such as PCB semiquinone radical anions (SQ(â¢-)), whose structure and role in PCB-induced toxicity are difficult to investigate due to their relative instability. The unrestricted UB3LYP/6-311G** method was used to investigate several molecular descriptors of the syn- and anti-like conformation of SQs(â¢-). The bond lengths and angles of the quinone moiety of the SQs(â¢-) were in between the values reported for PCB quinones and hydroquinones, which is consistent with the distribution of the α highest occupied molecular orbital (α-HOMO). The dihedral angles between the two ring systems increased in the presence of ortho chlorine substituents and were smaller compared to the corresponding PCB quinones. The ground-state energies indicate that the anti-like conformation of the SQs(â¢-) is more favorable than the syn-like conformation. Molecular descriptor used for modeling of quantitative structure-activity relationships displayed some dependence on the conformation. These findings suggest that SQs(â¢-) in both the syn- and antilike conformation may interact differently with target molecules, which may have implications for the toxicity of PCBs.
Assuntos
Benzoquinonas/química , Bifenilos Policlorados/química , Teoria Quântica , Difusão , Modelos Moleculares , Conformação Molecular , Bifenilos Policlorados/toxicidade , Relação Quantitativa Estrutura-Atividade , EstereoisomerismoRESUMO
Lignin derived from lignocellulosic biomass is the largest source of renewable bioaromatics present on earth and requires environmentally sustainable separation strategies to selectively obtain high-value degradation products. Applications of supramolecular interactions have the potential to isolate lignin compounds from biomass degradation fractions by the formation of variable inclusion complexes with cyclodextrins (CDs). CDs are commonly used as selective adsorbents for many applications and can capture guest molecules in their internal hydrophobic cavity. The strength of supramolecular interactions between CDs and lignin model compounds that represent potential lignocellulosic biomass degradation products can be characterized by assessing the thermodynamics of binding stability. Consequently, the inclusion interactions of ß-CD and lignin model compounds G-(ß-O-4')-G, G-(ß-O-4')-truncG (guaiacylglycerol-ß-guaiacyl ether), and G-(ß-ß')-G (pinoresinol) were investigated empirically by electrospray ionization mass spectrometry and isothermal titration calorimetry, complemented by molecular dynamics (MD) simulations. Empirical results indicate that there are substantial differences in binding stability dependent on the linkage type. The lignin model ß-ß' dimer showed more potential bound states including 1:1, 2:1, and 1:2 (guest:host) complexation and, based on binding stability determinations, was consistently the most energetically favorable guest. Empirical results are supported by MD simulations that reveal that the capture of G-(ß-ß')-G by ß-CD is promising with a 66% probability of being bound for G-(ß-O-4')-truncG compared to 88% for G-(ß-ß')-G (unbiased distance trajectory and explicit counting of bound states). These outcomes indicate CDs as a promising material to assist in separations of lignin oligomers from heterogeneous mixtures for the development of environmentally sustainable isolations of lignin compounds from biomass fractions.
Assuntos
Ciclodextrinas , beta-Ciclodextrinas , Calorimetria , Ciclodextrinas/química , Lignina , Simulação de Dinâmica Molecular , Polímeros , beta-Ciclodextrinas/químicaRESUMO
Successful strategies for the attachment of oligopeptides to mesoporous silica with pores large enough to load biomolecules should utilize the high surface area of pores to provide an accessible, protective environment. A two-step oligopeptide functionalization strategy is examined here using diazirine-based heterobifunctional linkers. Mesoporous silica nanoparticles (MSNPs) with average pore diameter of ~8 nm and surface area of ~730 m2/g were synthesized and amine-functionalized. Tetrapeptides Gly-Gly-Gly-Gly (GGGG) and Arg-Ser-Ser-Val (RSSV), and a peptide comprised of four copies of RSSV (4RSSV), were covalently attached via their N-terminus to the amine groups on the particle surface by a heterobifunctional linker, sulfo-succinimidyl 6-(4,4'-azipentanamido)hexanoate (sulfo-NHS-LC-diazirine, or SNLD). SNLD consists of an amine-reactive NHS ester group and UV-activable diazirine group, providing precise control over the sequence of attachment steps. Attachment efficiency of RSSV was measured using fluorescein isothiocyanate (FITC)-tagged RSSV (RSSV-FITC). TGA analysis shows similar efficiency (0.29, 0.31 and 0.26 mol peptide/mol amine, respectively) for 4G, RSSV and 4RSSV, suggesting a generalizable method of peptide conjugation. The technique developed here for the conjugation of peptides to MSNPs provides for their attachment in pores and can be translated to selective peptide-based separation and concentration of therapeutics from aqueous process and waste streams.
RESUMO
Poly(propylene glycol) (PPG) of moderately high molecular weight (M(n) = 3500 Da) exhibits amphibious behavior in aqueous solution in that it is hydrophilic at low temperature but hydrophobic at high temperature. This property is utilized to generate porous titania thin films with a hierarchical structure consisting of macroporous voids/cracks in films with mesoporous walls. The smaller mesopores result from the self-assembly of the Pluronic block copolymer P123 to form micellar templates in well-ordered arrays with hexagonal symmetry. The larger pores are generated from the phase separation of PPG during aging of the films. The PPG acts to a limited degree as a swelling agent for the P123 micelles, but because the films are aged at a low temperature where PPG is hydrophilic, much of the PPG remains in the polar titania phase. Upon heating, the PPG phase separates to form randomly dispersed, large pores throughout the film while retaining the ordered mesoporous P123-templated structure in the matrix of the material. TEM and SEM imaging confirm that calcined titania thin films have interconnected hierarchical porous structures consisting of ordered mesopores 4-12 nm in diameter and macroporous voids >100 nm in size. The density and size of the voids increase as more PPG is added to the films.
RESUMO
A study of the interaction between cell membranes and small molecules derived from lignin, a protective phenolic biopolymer found in vascular plants, is crucial for identifying their potential as pharmacological and toxicological agents. In this work, the interactions of model cell membranes [supported 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) lipid bilayers] are compared for three ßO4 dimers of coniferyl alcohol (G lignin monomer): guaiacylglycerol guaiacol ester with a hydroxypropenyl (HOC3H4-) tail (G-ßO4'-G), a truncated GG dimer without HOC3H4- (G-ßO4'-truncG), and a benzylated GG dimer (benzG-ßO4'-G). The uptake of the lignin dimers (per mass of lipid) and the energy dissipation (a measure of bilayer disorder) are higher for benzG-ßO4'-G and G-ßO4'-truncG than those for G-ßO4'-G in the gel-phase DPPC bilayer, as measured using quartz crystal microbalance with dissipation (QCM-D). A similar uptake of G-ßO4'-truncG is observed for a fluid-phase bilayer of 1,2-dioleoyl-sn-glycero-3-phosphocholine, suggesting that the effect of the bilayer phase on dimer uptake is minimal. The effects of increasing lignin dimer concentration are examined through an analysis of density profiles, potential of mean force curves, lipid order parameters, and bilayer area compressibilities (disorder) in the lipid bilayers obtained from molecular dynamics simulations. Dimer distributions and potentials of mean force indicate that the penetration into bilayers is higher for benzG-ßO4'-G and G-ßO4'-truncG than that for G-ßO4'-G, consistent with the QCM-D results. Increased lipid tail disorder due to dimer penetration leads to a thinning and softening of the bilayers. Minor differences in the structure of lignin derivatives (such as truncating the hydroxypropenyl tail) have significant impacts on their ability to penetrate lipid bilayers.
Assuntos
Simulação de Dinâmica Molecular , Técnicas de Microbalança de Cristal de Quartzo , Membrana Celular , Lignina , Bicamadas LipídicasRESUMO
Nanoparticle delivery of polynucleic acids traditionally relies on the modulation of surface interactions to achieve loading and release. This work investigates the additional role of confinement in mobility of dsRNA (84 and 282 base pair (bp) sequences of Spodoptera frugiperda) as a function of silica nanopore size (nonporous, 3.9, 8.0, and 11.3 nm). Amine-functionalized nanoporous silica microspheres (NPSMs, â¼10 µm) are used to directly visualize the loading and exchange of fluorescently labeled dsRNA. Porous particles are fully accessible to both lengths of dsRNA by passive diffusion, except for 282 bp dsRNA in 3.9 nm pores. The stiffness of dsRNA suggests that encapsulation occurs by threading into nanopores, which is inhibited when the ratio of dsRNA length to pore size is large. The mobility of dsRNA at the surface and in the core of NPSMs, as measured by fluorescence recovery after photobleaching, is similar. The mobility increases with pore size (from 0.0002 to 0.001 µm2/s for 84 bp dsRNA in 3.9-11.3 nm pores) and decreases with the length of dsRNA. However, when the dsRNA is unable to load into the pores (on nonporous particles and for 282 bp dsRNA in 3.9 nm pores), surface mobility is not detectable. The pore structure appears to serve as a "source" to provide a mobile network of dsRNA at the particle surface. The importance of mobility is demonstrated by exchange experiments, where NPSMs saturated with mobile dsRNA can exchange dsRNA with the surrounding solution, while immobile dsRNA is not exchanged. These results indicate that nanoparticle synthesis techniques that provide pores large enough to take up polynucleic acids internally (and not simply on the external surface of the particle) can be harnessed to design polynucleic acid/nanoporous silica combinations for controlled mobility as a path forward toward effective nanocarriers.
Assuntos
Nanopartículas , Nanoporos , Nanopartículas/química , Porosidade , RNA de Cadeia Dupla , Dióxido de Silício/químicaRESUMO
Cellular uptake and expulsion mechanisms of engineered mesoporous silica nanoparticles (MSNPs) are important in their design for novel biomolecule isolation and delivery applications such as nanoharvesting, defined as using nanocarriers to transport and isolate valuable therapeutics (secondary metabolites) out of living plant organ cultures (e.g., hairy roots). Here, temperature-dependent MSNP uptake and recovery processes in hairy roots are examined as a function of surface chemistry. MSNP uptake into hairy roots and time-dependent expulsion are quantified using Ti content (present for biomolecule binding) and fluorescence spectroscopy of fluorescently tagged MSNPs, respectively. The results suggest that functionalization and surface charge (regulated by amine group attachment) play the biggest role in the effectiveness of uptake and recovery. Comparison of MSNP interactions with hairy roots at 4 and 23 °C shows that weakly charged MSNPs functionalized only with Ti are taken up and expelled by thermally activated mechanisms, while amine-modified positively charged particles are taken up and expelled mainly by direct penetration of cell walls. Amine-functionalized MSNPs move spontaneously in and out of plant cells by dynamic exchange with a residence time of 20 ± 5 min, suggesting promise as a biomolecule nanoharvesting platform for plant organ cultures.
Assuntos
Nanopartículas , Dióxido de Silício , Células Vegetais , PlantasRESUMO
Application of polarization transfer techniques such as DEPT and INEPT in (29)Si NMR investigation of bridged silane polymerization requires knowledge of indirect (29)Si-(1)H scalar coupling constants in the silane system. However, the fully coupled (29)Si NMR spectra of these molecules, specifically those containing ethylene bridging groups, are too complicated to measure the coupling constants directly by visual inspection. This is because unlike hydrocarbon systems where one-bond proton-carbon coupling constants exceed other coupling constants by an order of magnitude, in silanes the closest proton-silicon pairs are separated by two bonds and all coupling coefficients (both homonuclear and heteronuclear) are of similar magnitude. In these systems, theoretical tools are required to interpret the spectra of even simple molecules. Here, we determine density functional theory estimates of (29)Si-(1)H scalar coupling constants and use these along with homonuclear coupling constant estimates to resolve the nontrivial nature of these spectra. We also report a Karplus equation consistent with the dihedral angle dependence of the three-bond homo- and heteronuclear coupling in the ethylene bridge. By thermal averaging of DFT coupling constants, a good initial guess of the coupled (29)Si spectral pattern is made, which is easily refined by curve fitting to determine estimates of all coupling constants in the system.
Assuntos
Prótons , Silanos/química , Silício/química , Espectroscopia de Ressonância Magnética/normas , Padrões de ReferênciaRESUMO
The performance of four basis sets (6-311+G(2d,p), IGLO-III, cc-PVTZ, and 6-31G) is evaluated in order to find a quantum mechanical technique that can be used to accurately estimate (29)Si-(1)H spin-spin coupling constants in organoalkoxysilanes. The 6-31G basis set with the B3LYP functional is found to be an accurate, efficient, and cost-effective density functional theory method for predicting spin-spin coupling constants of organoalkoxysilanes. Knowledge of these scalar coupling constants and their dependence on structural variations is important to be able to fine-tune NMR experiments that rely on polarization transfer among nuclei, such as (29)Si distortionless enhancement by polarization transfer (DEPT). The effects of size and the number of unhydrolyzable alkyl groups attached to silicon and the effects of substitution of alkoxy groups with hydroxyl groups on (29)Si-(1)H spin-spin coupling constants are investigated using this DFT method. The results show that the predicted scalar coupling between silicon and organic groups depends weakly on the degree of hydrolysis of the alkoxysilanes. The effectiveness of this method is also illustrated for the determination of spin-spin coupling constants in a species containing a siloxane bond.
Assuntos
Hidrogênio/química , Teoria Quântica , Silanos/química , Silício/química , Simulação por Computador , Isótopos , Modelos QuímicosRESUMO
The potential to impart surfaces with specific lignin-like properties (i.e. resistance to microbes) remains relatively unexplored due to the lack of well-defined lignin-derived small molecules and corresponding surface functionalization strategies. Here, allyl-modified guaiacyl ß-O-4 eugenol (G-eug) lignin-derived dimer is synthesized and attached to mesoporous silica nanoparticles (MSNPs) via click chemistry. The ability of G-eug lignin-dimer functionalized particles to interact with and disrupt synthetic lipid bilayers is compared to that of eugenol, a known natural antimicrobial. Spherical MSNPs (â¼150â¯nm diameter with 4.5â¯nm pores) were synthesized using surfactant templating. Post-synthesis thiol (SH) attachment was performed using (3-mercaptopropyl) trimethoxysilane and quantified by Ellman's test. The resultant SH-MSNPs were conjugated with the G-eug dimers or eugenol by a thiol-ene reaction under ultraviolet light in the presence of a photo initiator. From thermogravimetric analysis (TGA), attachment densities of approximately 0.22â¯mmol eugenol/g particle and 0.13â¯mmol G-eug dimer/g particle were achieved. The interaction of the functionalized MSNPs with a phospholipid bilayers of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (representing model cell membranes) supported on gold surface was measured using Quartz Crystal Microbalance with Dissipation monitoring (QCM-D). Eugenol-grafted MSNPs in PBS (up to 1â¯mg/mL) associated with the bilayer and increased the mass adsorbed on the QCM-D sensor. In contrast, MSNPs functionalized with G-eug dimer show qualitatively different behavior, with more uptake and evidence of bilayer disruption at and above a particle concentration of 0.5â¯mg/mL. These results suggest that bio-inspired materials with conjugated lignin-derived small molecules can serve as a platform for novel antimicrobial coatings and therapeutic carriers.
Assuntos
Eugenol/química , Lignina/química , Bicamadas Lipídicas/química , Nanopartículas/química , Dióxido de Silício/química , Dimerização , Estrutura Molecular , Dióxido de Silício/síntese químicaRESUMO
Plant secondary metabolites are valuable therapeutics not readily synthesized by traditional chemistry techniques. Although their enrichment in plant cell cultures is possible following advances in biotechnology, conventional methods of recovery are destructive to the tissues. Nanoharvesting, in which nanoparticles are designed to bind and carry biomolecules out of living cells, offers continuous production of metabolites from plant cultures. Here, nanoharvesting of polyphenolic flavonoids, model plant-derived therapeutics, enriched in Solidago nemoralis hairy root cultures, is performed using engineered mesoporous silica nanoparticles (MSNPs, 165â¯nm diameter and 950 m2/g surface area) functionalized with both titanium dioxide (TiO2, 425â¯mg/g particles) for coordination binding sites, and amines (NH2, 145â¯mg/g particles) to promote cellular internalization. Intracellular uptake and localization of the nanoparticles (in Murashige and Skoog media) in hairy roots were confirmed by tagging the particles with rhodamine B isothiocyanate, incubating the particles with hairy roots, and quenching bulk fluorescence using trypan blue. Nanoharvesting of biologically active flavonoids was demonstrated by observing increased antiradical activity (using 2,2-diphenyl-1-picrylhydrazyl radical scavenging assay) by nanoparticles after exposure to hairy roots (indicating general antioxidant activity), and by the displacement of the radio-ligand [3H]-methyllycaconitine from rat hippocampal nicotinic receptors by solutes recovered from nanoharvested particles (indicating pharmacological activity specific to S. nemoralis flavonoids). Post-nanoharvesting growth suggests that the roots are viable after nanoharvesting, and capable of continued flavonoid synthesis. These observations demonstrate the potential for using engineered nanostructured particles to facilitate continuous isolation of a broad range of biomolecules from living and functioning plant cultures.
Assuntos
Nanopartículas Metálicas/química , Compostos Fitoquímicos/química , Dióxido de Silício/química , Animais , Biotecnologia/métodos , Humanos , Nanoestruturas/químicaRESUMO
Aim: Few targeted therapies are available for triple-negative breast cancer (TNBC) patients. Here, we propose a novel alkaline-lignin-conjugated-poly(lactic-co-glycolic acid) (L-PLGA) nanoparticle drug delivery system to improve the efficacy of targeted therapies. Materials & methods: L-PLGA nanoparticles (NPs) loaded with the MEK1/2 inhibitor GDC-0623 were characterized, tested in vitro on MDA-MB-231 TNBC cell line and compared with loaded PLGA NPs. Results: Loaded L-PLGA NPs were less than half the size of PLGA NPs, had slower drug release and improved the efficacy of GDC-0623 when tested in vitro. We demonstrated that GDC-0623 reversed epithelial-to-mesenchymal transition in TNBC. Conclusion: Our findings indicate that L-PLGA NPs are superior to PLGA NPs in delivering GDC-0623 to cancer cells for improved efficacy in vitro.
Assuntos
Sistemas de Liberação de Medicamentos , Nanopartículas , Copolímero de Ácido Poliláctico e Ácido Poliglicólico , Neoplasias de Mama Triplo Negativas , Linhagem Celular Tumoral , Humanos , Lignina , MAP Quinase Quinase 1/antagonistas & inibidores , MAP Quinase Quinase 2/antagonistas & inibidores , Ácido Poliglicólico/uso terapêutico , Neoplasias de Mama Triplo Negativas/tratamento farmacológicoRESUMO
Amine-functionalized mesoporous silica nanoparticles (MSNPAs) are ideal carriers for oligonucleotides for gene delivery and RNA interference. This investigation examines the thermodynamic driving force of interactions of double-stranded (ds) RNA with MSNPAs as a function of RNA length (84 and 282 base pair) and particle pore diameter (nonporous, 2.7, 4.3, and 8.1 nm) using isothermal titration calorimetry, extending knowledge of solution-based nucleic acid-polycation interactions to RNA confined in nanopores. Adsorption of RNA follows a two-step process: endothermic interactions driven by entropic contribution from counterion (and water) release and an exothermic regime dominated by short-range interactions within the pores. Evidence of hindered pore loading of the longer RNA and pore size-dependent confinement of RNA in the MSPAs is provided from the relative contributions of the endothermic and exothermic regimes. Reduction of endothermic and exothermic enthalpies in both regimes in the presence of salt for both lengths of RNA indicates the significant contribution of short-range electrostatic interactions, whereas ΔH and ΔG values are consistent with conformation changes and desolvation of nucleic acids upon binding with polycations. Knowledge of the interactions between RNA and functionalized porous nanoparticles will aid in porous nanocarrier design suitable for functional RNA delivery.
Assuntos
Nanopartículas , Nanoporos , Adsorção , Porosidade , RNA , Dióxido de SilícioRESUMO
The use of bioactive glasses (e.g. silicates, phosphates, borates) has demonstrated to be an effective therapy for the restoration of bone fractures, wound healing and vascularization. Their partial dissolution towards the surrounding tissue has shown to trigger positive bioactive responses, without the necessity of using growth factors or cell therapy, which reduces money-costs, side effects and increases their translation to the clinics. However, bioactive glasses often need from stabilizers (e.g. SiO44-, Ti4+, Co2+, etc.) that are not highly abundant in the body and which metabolization is not fully understood. In this study, we were focused on synthesizing pure calcium phosphate glasses without the presence of such stabilizers. We combined a mixture of ethylphosphate and calcium 2-methoxyethoxide to synthesize nanoparticles with different compositions and degradability. Synthesis was followed by an in-depth nuclear magnetic resonance characterization, complemented with other techniques that helped us to correlate the chemical structure of the glasses with their physiochemical properties and reaction mechanism. After synthesis, the organically modified xerogel (i.e. calcium monoethylphosphate) was treated at 200 or 350⯰C and its solubility was maintained and controlled due to the elimination of organics, increase of phosphate-calcium interactions and phosphate polycondensation. To the best of our knowledge, we are reporting the first sol-gel synthesis of binary (P2O5-CaO) calcium phosphate glass nanoparticles in terms of continuous polycondensated phosphate chains structure without the addition of extra ions. The main goal is to straightforward the synthesis, to get a safer metabolization and to modulate the bioactive ion release. Additionally, we shed light on the chemical structure, reaction mechanism and properties of calcium phosphate glasses with high calcium contents, which nowadays are poorly understood. STATEMENT OF SIGNIFICANCE: The use of bioactive inorganic materials (i.e. bioactive ceramics, glass-ceramics and glasses) for biomedical applications is attractive due to their good integration with the host tissue without the necessity of adding exogenous cells or growth factors. In particular, degradable calcium phosphate glasses are completely resorbable, avoiding the retention in the body of the highly stable silica network of silicate glasses, and inducing a more controllable degradability than bioactive ceramics. However, most calcium phosphate glasses include the presence of stabilizers (e.g. Ti4+, Na+, Co2+), which metabolization is not fully understood and complicates their synthesis. The development of binary calcium phosphate glasses with controlled degradability reduces these limitations, offering a simple and completely metabolizable material with higher transfer to the clinics.
Assuntos
Compostos de Cálcio/química , Vidro/química , Espectroscopia de Ressonância Magnética , Nanopartículas/química , Óxidos/química , Fosfatos/químicaRESUMO
High resolution differential scanning calorimetry (DSC) and molecular dynamics (MD) simulations were used to investigate the effect of three lignin dimers on the gel to fluid phase transition in DPPC lipid bilayers. The goal of this research is to begin to understand the partitioning of model lignin dimers into lipid bilayers and its effects on the gel to fluid transition temperature (Tm). The long-term objective is to establish structure-function relationships for well-defined lignin derivatives at biologically relevant surfaces. This work uses a newly synthesized guiacylglycerol guaiacol ester with a hydroxypropenyl (HOC3H4-) group resembling natural lignin (GG dimer), compared with a truncated GG dimer without the HOC3H4- and benzyl-modified GG dimers. The DSC results show that the dimer most like natural lignin (with a hydroxypropenyl tail) has log K = 2.72 ± 0.05, and MD simulations show that it associates with the headgroups of the lipid but does not penetrate strongly into the interior of the bilayer. Therefore, this dimer has little effect on the Tm value. In contrast, the truncated dimer, which has been used as a representative GG dimer in prior studies, partitions into the bilayer, as seen in MD simulations, and shifts Tm because of its increased lipophilicity (DSC log K = 3.45 ± 0.20). Similarly, modification of the natural GG dimer by benzylation of the phenol makes it lipophilic (DSC log K = 3.38 ± 0.28), causing it to partition into the bilayer, as seen in MD simulations and shift Tm. In MD, we capture the transition from gel to fluid phase by defining and analyzing a normalized deuterium order parameter averaged over all carbon atoms located in the middle of the lipid tails. In this way, the phase transition can be clearly observed and, importantly, MD results show the same trend of transition temperature shifts as the DSC results. Furthermore, we compare partition coefficients estimated from free energy profiles calculated in MD to those obtained from experiment and they are in qualitative agreement. The success at predicting the structural effects of lignin dimers on lipid bilayers suggests that MD simulations can be used in the future to screen the interactions of lignin oligomers and their derivatives with lipid bilayers.