Trends and patterns of cause-specific hospitalizations in mainland Portugal between 2000 and 2016.

OBJECTIVES: This study aimed to describe trends and patterns of cause-specific hospitalizations in mainland Portugal between 2000 and 2016. STUDY DESIGN: This was a retrospective observational study based on hospital discharge data during the period 2000-2016 in mainland Portugal. METHODS: All inpatient hospital discharges among mainland Portuguese public hospitals were considered to evaluate trends and patterns over the years through hospitalization proportions, number of hospitalizations, age-standardized hospitalization rates (direct standardization using the European standard population), and the number of in-hospital stay days (bed-days). Health Cost and Utilization Project Clinical Classifications Software was used to categorize and cluster inpatients' principal diagnosis. RESULTS: Between 2000 and 2002 and between 2014 and 2016, age-standardized hospitalization rates decreased by 8.6%. Moreover, "liveborn," "diseases of the heart," and "respiratory infections" were the leading hospitalization causes in both periods with a variation of -8.8%, -8.3%, and 13.4% on age-standardized hospitalization rate, respectively. The age-standardized hospitalization rate due to "bacterial infection" increased by 108.7%. "Respiratory diseases" are the leading cause responsible for more in-hospital stay days in the period 2014-2016 (48.6% increase). All Portuguese regions presented decreasing overall trends in their age-standardized hospitalization rates in the study period, yet increasing trends were observed until 2004 except for the Lisbon region; in addition, the number of in-hospital stay days remained relatively stable through time. CONCLUSIONS: Hospitalizations in mainland Portugal decreased between 2000 and 2016 with heterogeneous patterns considering time, age group, and gender. "Aspiration pneumonitis; food/vomitus," "diseases of the white blood cells," "other nutritional, endocrine, and metabolic disorders," "bacterial infection," and "pathological fractures" revealed substantial increases, and further evaluations and monitoring are required.

Height difference between the vestibular and palatal walls and palatal width: a cone beam computed tomography approach.

BACKGROUND: The objective of this study was to measure two parameters involved in tri-dimensional implant planning: the position of the buccal and palatal bone wall and the palatal thickness. METHODS: Cone beam computed tomography (CBCT) images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The height difference between the palatal and buccal walls was measured on the most coronal point of both walls. The thickness of the palatal wall was measured 2 mm from the most coronal point of the palatal wall. RESULTS: The mean values in the maxilla were 1.7 ± 0.9 mm for central and lateral incisors, 2.2 ± 1.7 mm for canines, 1.6 ± 0.9 mm for premolars and 1.9 ± 1.5 mm for molars. In the lower jaw, the mean values were 1.3 ± 0.8 mm for incisors, 1.7 ± 1.2 mm for canines, 2.3 ± 1.3 mm for premolars, and 2.6 ± 1.7 mm for molars. In the upper jaw, more than 55% of maxillary teeth (excluding second premolars and molars) presented mean height differences greater than 1 mm. In the mandible, more than 60% of incisors showed a buccal bone thickness of 1 mm from the apical to lingual aspect. All teeth except the second premolar presented a buccal wall located more than 1 mm more apically than the lingual bone wall. CONCLUSIONS: The buccal bone wall is located more apically (greater than 1 mm) than the palatal or lingual table in most of the cases assessed. The thickness of the palatal or lingual table is also less than 2 mm in the maxilla and mandible, except in the upper canines and premolars and the lower molars.

Repeatability of the resonance frequency analysis values in implants with a new technology.

BACKGROUND: Assess the reliability (by means of reproducibility and repeatability) of the PenguinRFA system, analyse the ISQ values of different implant types and correlate the ISQ with the insertion torque during the placement of the implant. MATERIAL AND METHODS: 120 rough surface implants were placed in bovine bone (type II and III). The implants were divided into groups, according to its design. Once the implants were in place, the exact insertion torque was registered. Then, primary stability was measured by means of the resonance frequency analysis with the PenguinRFA and the Osstell ISQ devices. In each implant two transducers of each device were used. Three measurements were obtained with each transducer. RESULTS: The mean ISQ (implant stability quotient) of the whole sample is 67,70 ± 5,51. The Intraclass Correlation Coefficient (ICC) is 0,933 and 0,944 for transducers 1 and 2 respectively. The reproducibility is 0,906. The mean insertion torque is 24,54 ± 8,96N. The correlation between the ISQ and the insertion torque is 0,507 p<0,000 (MultiPeg 1) and 0,468 p<0,000 (MultiPeg 2) for bone type II and 0,533 p<0,801 (MultiPeg 1) and 0,193 p<0,140 (MultiPeg 2) for bone type III. CONCLUSIONS: The results of the present trial suggest that the PenguinRFA presents excellent reproducibility and repeatability, so it could be very useful in the monitoring of the stability of implants over time. Additionally, according to the results, the correlation between the IT and the RFA is low and there are no statistically significant differences in between implant types.

Unravelling the effect of macro and microscopic design of dental implants on osseointegration: a randomised clinical study in minipigs.

Several dental implants are commercially available and new prototype design are constantly being fabricated. Nevertheless, it is still unclear what parameters of the design affect most the osseointegration of dental implants. The purpose of this study is to assess the effects of the microscopic and macroscopic design of dental implants in the osseointegration by comparing three macroscopic designs (Straumann tissue level (STD), essential cone (ECD) and prototype design (PD)) and six surface treatments. A total of 96 implants were placed in 12 minipigs. The implant stability quotient (ISQ), was assessed at the time of implantation, as well as at 2, 4 and 8 weeks. Histomorphometric and statistical analyses were conducted at the different sacrifice times, being 2, 4 and 8 weeks, to analyse the bone to implant contact (BIC), the bone area density (BAT) and the density of bone outside the thread region (ROI). The macroscopic design results showed higher ISQ values for the ECD, whereas the histomorphometric analysis showed higher ossoeintegration values for the STD. Regarding the microscopic design, both Sandblasted plus acid etching (hydrochloric/sulphuric acid) in a nitrogen atmosphere (SLActive) and Shot-blasted or bombarded with alumina particles and posterior alkaline immersion and thermal treatment (ContacTi) showed superior results in terms of osseointegration and reduced the osseointegration times from 8 weeks to 4 weeks compared to the other analysed surfaces. In conclusion, each of the macroscopic and microscopic designs need to be taken into account when designing novel dental implants to enhance the osseointegration process.

Thickness of the buccal bone wall and root angulation in the maxilla and mandible: an approach to cone beam computed tomography.

BACKGROUND: The objective of this paper is to anatomically describe the bone morphology in the maxillary and mandibular tooth areas, which might help in planning post-extraction implants. METHODS: CBCT images (Planmeca ProMax 3D) of 403 teeth (208 upper teeth and 195 lower teeth) were obtained from 49 patients referred to the Dental School of Seville from January to December 2014. The thickness of the facial wall was measured at the crest, point A, 4 mm below, point B, and at the apex, point C. The second parameter was the angle formed between the dental axis and the axis of the basal bone. RESULTS: A total of 403 teeth were measured. In the maxilla, 89.4% of incisors, 93.94% of canines, 78% of premolars and 70.5% of molars had a buccal bone wall thickness less than the ideal 2 mm. In the mandible, 73.5% of incisors, 49% of canines, 64% of premolars and 53% of molars had < 1 mm buccal bone thickness as measured at point B. The mean angulation in the maxilla was 11.67 ± 6.37° for incisors, 16.88 ± 7.93° for canines, 13.93 ± 8.6° for premolars, and 9.89 ± 4.8° for molars. In the mandible, the mean values were 10.63 ± 8.76° for incisors, 10.98 ± 7.36° for canines, 10.54 ± 5.82° for premolars and 16.19 ± 11.22° for molars. CONCLUSIONS: The high incidence of a buccal wall thickness of less than 2 mm in over 80% of the assessed sites indicates the need for additional regeneration procedures, and several locations may also require custom abutments to solve the angulation problems for screw-retained crowns.

Comparative analysis of 2 resonance frequency measurement devices: Osstell Mentor and Osstell ISQ.

OBJECTIVE: Comparing reliability of Osstell Mentor and Osstell ISQ in implant stability measurement, and assessing whether their measurements are comparable. MATERIALS AND METHOD: Implant stability was measured with both devices on 58 implants in 15 patients. Six measurements were completed with each device with 2 different transducers (3 measurements with each transducer), that is, 12 measurements for each implant. RESULTS: Mean implant stability quotient (ISQ) value with Osstell ISQ was 72.59, 72.47, and 73.17 in the first measurements, respectively. With Osstell Mentor, the results were 72.43, 72.60, and 73.26, respectively; mean ranges were 3.37, 3.60, and 3.75, respectively. However, mean value with Osstell ISQ and Osstell Mentor was 72.87 and 72.04, respectively. The intraclass correlation coefficient was 0.98. This means an almost perfect degree of concordance between both devices. CONCLUSIONS: Resonance frequency analysis systems in Osstell Mentor and Osstell ISQ show almost perfect reproducibility and repeatability.

SCN5A compound heterozygosity mutation in Brugada syndrome: Functional consequences and the implication for pharmacological treatment.

AIMS: SCN5A gene encodes the α-subunit of Nav1.5, mainly found in the human heart. SCN5A variants are the most common genetic alterations associated with Brugada syndrome (BrS). In rare cases, compound heterozygosity is observed; however, its functional consequences are poorly understood. We aimed to analyze the functional impact of de novo Nav1.5 mutations in compound heterozygosity in distinct alleles (G400R and T1461S positions) previously found in a patient with BrS. Moreover, we evaluated the potential benefits of quinidine to improve the phenotype of mutant Na+ channels in vitro. MATERIALS AND METHODS: The functional properties of human wild-type and Nav1.5 variants were evaluated using whole-cell patch-clamp and immunofluorescence techniques in transiently expressed human embryonic kidney (HEK293) cells. KEY FINDINGS: Both variants occur in the highly conservative positions of SCN5A. Although all variants were expressed in the cell membrane, a significant reduction in the Na+ current density (except for G400R alone, which was undetected) was observed along with abnormal biophysical properties, once the variants were expressed in homozygosis and heterozygosis. Interestingly, the incubation of transfected cells with quinidine partially rescued the biophysical properties of the mutant Na+ channel. SIGNIFICANCE: De novo compound heterozygosis mutations in SNC5A disrupt the Na+ macroscopic current. Quinidine could partially reverse the in vitro loss-of-function phenotype of Na+ current. Thus, our data provide, for the first time, a detailed biophysical characterization of dysfunctional Na+ channels linked to compound heterozygosity in BrS as well as the benefits of the pharmacological treatment using quinidine on the biophysical properties of Nav1.5.

Relevant Design Aspects to Improve the Stability of Titanium Dental Implants.

Post-extractional implants and immediate loading protocols are becoming much more frequent in everyday clinical practice. Given the existing literature about tapered implants, the objective of this paper was to understand whether implant shape had a direct influence on the results of the insertion torque (IT) and implant stability quotient (ISQ). Seven tapered implant prototypes were developed and distributed into three groups and compared with a control cylindrical implant-VEGA by Klockner Implant System. The implants were inserted into bovine bone type III according to Lekholm and Zarb Classification. The sample size was n = 30 for the three groups. Final IT was measured with a torquemeter, and the ISQ was measured with Penguin Resonance Frequency Analysis (RFA). Modifications done to the Prototype I did not reveal higher values of the ISQ and IT when compared to VEGA. In the second group, when comparing the five prototypes (II-VI) with VEGA, it was seen that the values of the ISQ and IT were not always higher, but there were two values of the ISQ that were statistically significantly higher with the 4.0 mm diameter Prototypes II (76.3 ± 6.1) and IV (78 ± 3.7). Prototype VII was the one with higher and significant values of the ISQ and IT. In both diameters and in both variables, all differences were statistically significant enough to achieve the higher values of primary stability values (IT and ISQ). Given the limitations of this study, it can be concluded that when there is an increase of the diameter of the implant and body taper, there is an increase of the ISQ and IT, showing that the diameter of the implant is an important criteria to obtain higher values of primary stability.

To be or not to be hospitalised with tuberculosis in Portugal.

SETTING: In Portugal, as in other countries, tuberculosis (TB) is considered a disease that should be managed on an ambulatory basis. However, hospitalisation remains important to manage some at-risk groups and complications.OBJECTIVE: To identify the possible risk factors associated with hospitalisations in TB patients in Portugal.DESIGN: Data extraction through two national databases (one for registration of TB cases and the other with hospitalisation information in public health facilities) between 2007 and 2013. Univariate and multivariate analysis of demographic and clinical variables was performed.RESULTS: We identified 4421 hospitalisations. Chronic diseases, cancer, substance abuse, a higher social/economic risk, extra-pulmonary TB, lung cavitary disease and previous uncompleted treatment were more frequent among hospitalised patients. Human immunodeficiency virus coinfection, cancer, alcohol abuse, extra-pulmonary TB and uncompleted previous TB treatment were the most important predictors of hospitalisation with TB. The hospitalisation rate among TB patients in Portugal was lower when compared with other countries with lower and higher incidences.CONCLUSION: Immune dysfunctions and progression of chronic diseases are associated with more severe forms of TB and frequent adverse effects which can be sufficiently severe to necessitate hospital admission. Despite having an intermediate TB incidence, the hospitalisation rate in Portugal is not higher than that of other countries.

Failure to phosphorylate AKT in podocytes from mice with early diabetic nephropathy promotes cell death.

Loss of podocytes by apoptosis characterizes the early stages of diabetic nephropathy. To examine its mechanism we studied glomeruli and podocytes isolated from db/db mice with early diabetic nephropathy and albuminuria. Phosphorylation of AKT (protein kinase B, a key survival protein) was found to be lower in the glomeruli of 12 week old db/db compared to db/+ mice. In vitro, insulin phosphorylated AKT solely in podocytes from db/+ mice. Serum deprivation and exposure to tumor necrosis factor-alpha significantly compromised cell viability in podocytes from db/db but not from db/+ mice, and this was associated with a significant decrease in AKT phosphorylation. Inhibition of AKT was necessary to achieve the same degree of cell death in db/+ podocytes. Our study shows that podocyte inability to respond to insulin and susceptibility to cell death may partially account for the decreased podocyte number seen in early diabetic nephropathy.

High prevalence of apical periodontitis amongst smokers in a sample of Spanish adults.

AIM: To study the prevalence of apical periodontitis in smoker and nonsmoker patients. METHODOLOGY: In a cross-sectional study, the records of 180 subjects, 109 smokers and 71 nonsmokers, were examined. All participants underwent a full-mouth radiographic survey incorporating 14 periapical radiographs. The periapical region of all teeth, excluding third molars, was examined. Periapical status was assessed using the Periapical Index score. Statistical analyses were conducted using the Cohen's Kappa test, analysis of variance and logistic regression. RESULTS: Apical periodontitis in at least one tooth was found in 74% of smokers and in 41% of nonsmokers (P < 0.01; odds ratio = 4.2; 95% C. I. = 2.2-7.9). Amongst smoker patients 5% of the teeth had apical periodontitis, whereas in nonsmoker subjects 3% of teeth were affected (P = 0.008; odds ratio = 1.5; 95% C. I. = 1.1-2.1). The percentage of root filled teeth in smoker and nonsmoker patients was 2.5% and 1.5%, respectively (P < 0.05; odds ratio = 1.7; C. I. 95% = 1.0-2.6). CONCLUSIONS: In this study population, smoking was significantly associated with a greater frequency of root canal treatment and with an increased prevalence of apical periodontitis.

Anti-ophidian activity of Bredemeyera floribunda Willd. (Polygalaceae) root extract on the local effects induced by Bothrops jararacussu venom.

Bredemeyera floribunda roots are popularly used to treat snakebites in the semiarid region of Northeast Brazil, and previous studies indicate the anti-ophidian actions of triterpenoid saponins found in its roots. To assess B. floribunda root extract (BFRE) activity against the effects of Bothrops jararacussu venom (BjuV), antiphospholipasic, antiproteolytic, antihemorrhagic, antinecrotic, and anti-edematogenic activities were investigated in mice. Phytochemical analysis revealed the presence of saponins, flavonoids, and sugars, with rutin and saccharose being the major constituents of BFRE. Acute toxicity was determined and BFRE was nontoxic to mice. Phospholipase A2 and proteolytic activities induced by BjuV were inhibited in vitro by BFRE at all concentrations tested herein. BFRE (150 mg/kg) inhibited paw edema induced by BjuV (50 µg/animal), reducing total edema calculated by area under the curve, but carrageenan-induced paw edema was unchanged. Hemorrhagic and necrotizing actions of BjuV (50 µg/animal) were considerably decreased by BFRE treatment. Thus, BFRE blocked the toxic actions of B. jararacussu venom despite having no anti-inflammatory activity, which points to a direct inhibition of venom's toxins, as demonstrated in the in vitro assays. The larger amounts of rutin found in BFRE may play a role in this inhibition, since 3',4'-OH flavonoids are known inhibitors of phospholipases A2.

Clinical heterogeneity of autosomal recessive spastic paraplegias: analysis of 106 patients in 46 families.

BACKGROUND: Hereditary spastic paraplegias (HSPs) are a heterogeneous group of neurodegenerative disorders characterized by progressive and predominant spasticity of the lower limbs, in which dominant, recessive, and X-linked forms have been described. While autosomal dominant HSP has been extensively studied, autosomal recessive HSP is less well known and is considered a rare condition. OBJECTIVE: To analyze the clinical presentation in a large group of patients with autosomal recessive HSP from Portugal and Algeria to define homogeneous groups that could serve as a guide for future molecular studies. RESULTS: Clinical features in 106 patients belonging to 46 Portuguese and Algerian families with autosomal recessive HSP are presented, as well as the results of molecular studies in 23 of these families. Five phenotypes are defined: (1) pure early-onset families, (2) pure lateonset families, (3) complex families with mental retardation, (4) complex families with mental retardation and peripheral neuropathy, and (5) complex families with cerebellar ataxia. Six additional families have specific complex presentations, each of which is unique in the present series. Pyramidal signs in the upper limbs and pes cavus are frequent findings, while pseudobulbar signs, including dysarthria, dysphagia, and brisk jaw jerks, are more frequent in the complex forms. The complex forms have a poorer prognosis, while pure forms, particularly those with early onset, are more benign. One Algerian pure early-onset kindred was linked to the locus on chromosome 8, previously reported in 4 Tunisian families. Two of the Portuguese kindreds with complex forms (one with mental retardation and the other associated with hypoplasia of the corpus callosum) showed linkage to the locus recently identified on chromosome 16. CONCLUSIONS: Although autosomal recessive HSP represents a heterogeneous group of diseases, some phenotypes can be defined by analyzing a large group of patients. The fact that only one Algerian family was linked to chromosome 8 suggests that this is a rare localization even in kindreds with the same ethnic background. Linkage to chromosome 16 was found in 2 clinically diverse Portuguese kindreds, illustrating that this locus is also rare and may correspond to different phenotypes.

Are the endemic motor neuron diseases of Guam really disappearing?

Death certificates were reviewed to observe trends in the number of persons on Guam reported to have chronic degenerative motor neuron diseases (amyotrophic lateral sclerosis, parkinsonism-dementia or Parkinson's disease) at the time of death. Additional data, including age and race of the deceased and the name of the certifying physician were also collected. The number of persons having been diagnosed with amyotrophic lateral sclerosis is apparently decreasing while their mean age is increasing suggesting that the etiologic agents or factors causing this disease are less prevalent on Guam today than they have been in the past. Trends with regard to parkinsonism-dementia and Parkinson's disease are less clear.

Anti-ophidian activity of Bredemeyera floribunda Willd. (Polygalaceae) root extract on the local effects induced by Bothrops jararacussu venom

Bredemeyera floribunda roots are popularly used to treat snakebites in the semiarid region of Northeast Brazil, and previous studies indicate the anti-ophidian actions of triterpenoid saponins found in its roots. To assess B. floribunda root extract (BFRE) activity against the effects of Bothrops jararacussu venom (BjuV), antiphospholipasic, antiproteolytic, antihemorrhagic, antinecrotic, and anti-edematogenic activities were investigated in mice. Phytochemical analysis revealed the presence of saponins, flavonoids, and sugars, with rutin and saccharose being the major constituents of BFRE. Acute toxicity was determined and BFRE was nontoxic to mice. Phospholipase A2 and proteolytic activities induced by BjuV were inhibited in vitro by BFRE at all concentrations tested herein. BFRE (150 mg/kg) inhibited paw edema induced by BjuV (50 µg/animal), reducing total edema calculated by area under the curve, but carrageenan-induced paw edema was unchanged. Hemorrhagic and necrotizing actions of BjuV (50 µg/animal) were considerably decreased by BFRE treatment. Thus, BFRE blocked the toxic actions of B. jararacussu venom despite having no anti-inflammatory activity, which points to a direct inhibition of venom's toxins, as demonstrated in the in vitro assays. The larger amounts of rutin found in BFRE may play a role in this inhibition, since 3′,4′-OH flavonoids are known inhibitors of phospholipases A2.

Evaluation of cardiovascular toxicity of carbon nanotubes functionalized with sodium hyaluronate in oral regenerative medicine.

It has been demonstrated that carbon nanotubes (CNTs) associated with sodium hyaluronate (HY-CNTs) accelerate bone repair in the tooth sockets of rats. Before clinical application of HY-CNTs, it is important to assess their biocompatibility. Moreover, cardiac toxicity may be caused by the translocation of these particles to the blood stream. The aim of this study was to evaluate possible changes in cardiovascular function in male Wistar rats whose tooth sockets were treated with either CNTs or HY-CNTs (100 µg/mL, 0.1 mL). Blood pressure and heart rate were monitored in conscious rats 7 days after treatment. Cardiac function was evaluated using the Langendorff perfusion technique. The data showed no changes in blood pressure or heart rate in rats treated with either CNTs or HY-CNTs, and no significant changes in cardiac function were found in any of the groups. To confirm these findings, experiments were conducted in rats injected intraperitoneally with a high concentration of either CNTs or HY-CNTs (0.75 mg/kg). The same parameters were analyzed and similar results were observed. The results obtained 7 days following injection indicate that the administration of low concentrations of CNTs or HY-CNTs directly into tooth sockets did not cause any significant change in cardiovascular function in the rats. The present findings support the possibility of using these biocomposites in humans.

Radiological assessment of periapical status using the periapical index: comparison of periapical radiography and digital panoramic radiography.

AIM: To compare the use of periapical radiographs and digital panoramic images displayed on monitor and glossy paper in the assessment of the periapical status of the teeth using the periapical index (PAI). METHODOLOGY: A total of 86 subjects were examined. All participants underwent a full-mouth radiographic survey (14 periapical radiographs) and a panoramic radiography. The periapical status, using the PAI score, of all appraised teeth was assessed. RESULTS: Periapical radiographs allowed the assessment of the periapical status of 87% of teeth using the PAI. On the contrary, digital radiography had a significantly reduced potential to allow assessment of the periapical status (P<0.01). Only 57.6% and 34.1% of teeth could be appraised using digital panoramic images displayed on monitor and glossy paper respectively (P<0.01). The total percentage of teeth with periapical pathosis was five fold higher when assessed with digital panoramic images displayed on glossy paper compared with periapical radiographs (P<0.01). CONCLUSIONS: Teeth were best viewed on periapical radiographs except maxillary second and third molars, which were better viewed in orthopantomograms. Orthopantomograms on screen were scorable more often than when on printed images. Apical periodontitis was scored more often on paper than on screen, and more often on screen than in periapical radiographs.