Effect of Neuromuscular Fatigue on the Countermovement Jump Characteristics: Basketball-Related High-Intensity Exercises.

ABSTRACT: Yoshida, N, Hornsby, WG, Sole, CJ, Sato, K, and Stone, MH. Effect of neuromuscular fatigue on the countermovement jump characteristics: basketball related high-intensity exercises. J Strength Cond Res 38(1): 164-173, 2024-The purpose of this study was to investigate basketball specific neuromuscular (NM) fatigue effect on countermovement jump (CMJ) force-time (F-T) curve characteristics. Eleven male college-level basketball athletes performed 6 CMJ trials at 3 baseline (pre) and 6 postexercise time points. The fatiguing protocol consisted of high-intensity basketball related exercises commensurate with basketball game or practice. Typical CMJ (CMJ-TYP) and phase-specific CMJ variables were derived from the F-T curve. Meaningful differences in CMJ performance were examined using effect size (ES) compared with baseline and previous postexercise time point. Baseline with 3 separated measurements demonstrated suitable CMJ variables reproducibility (CV, coefficient of variation). Most CMJ-TYP output and performance variables displayed substantial alterations immediately postexercise (0 hour) and returned to baseline at 24 hours postexercise, whereas the time and rate-related CMJ-TYP and CMJ-phase variables tended to display delayed decline peaked at 2 hours and delayed recovery to baseline at 48 hours postexercise. In conjunction with the return of the time and rate-related variables, CMJ performance displayed supercompensation at 72 hours postexercise. The results indicate altered NM functions with desired CMJ performance, such as jump height, which imply an altered movement strategy at early stage of recovery process. Full recovery may take 48-72 hours. Practitioners are, therefore, advised to monitor variables reflecting NM functions for precise manipulation of the intensity and volume of exercise to avoid prolonging the recovery from NM fatigue.

Combined Accentuated Eccentric Loading and Rest Redistribution in High-Volume Back Squat: Acute Kinetics and Kinematics.

ABSTRACT: Chae, S, Long, SA, Lis, RP, McDowell, KW, Wagle, JP, Carroll, KM, Mizuguchi, S, and Stone, MH. Combined accentuated eccentric loading and rest redistribution in high-volume back squat: Acute kinetics and kinematics. J Strength Cond Res 38(4): 640-647, 2024-The purpose of this study was to explore acute kinetic and kinematic responses to combined accentuated eccentric loading and rest redistribution (AEL + RR). Resistance-trained men ( n = 12, 25.6 ± 4.4 years, 1.77 ± 0.06 m, and 81.7 ± 11.4 kg) completed a back squat (BS) 1 repetition maximum (1RM) and weight releaser familiarization session. Three BS exercise conditions (sets × repetitions × eccentric/concentric loading) consisted of (a) 3 × (5 × 2) × 110/60% (AEL + RR 5), (b) 3 × (2 × 5) × 110/60% (AEL + RR 2), and (c) 3 × 10 × 60/60% 1RM (traditional sets [TS]). Weight releasers (50% 1RM) were attached to every first repetition of each cluster set (every first, third, fifth, seventh, and ninth repetition in AEL + RR 5 and every first and sixth repetition in AEL + RR 2). The AEL + RR 5 resulted in significantly ( p < 0.05) greater concentric peak velocity (PV) (1.18 ± 0.17 m·s -1 ) and peak power (PP) (2,304 ± 499 W) compared with AEL + RR 2 (1.11 ± 0.19 m·s -1 and 2,148 ± 512 W) and TS (1.10 ± 0.14 m·s -1 and 2,079 ± 388 W). Furthermore, AEL + RR 5 resulted in significantly greater PV and PP across all 10 repetitions compared with TS. Although AEL + RR 5 resulted in significantly greater concentric mean force (MF) (1,706 ± 224 N) compared with AEL + RR 2 (1,697 ± 209 N) and TS (1,685 ± 211 N), no condition by set or repetition interactions existed. In conclusion, AEL + RR 5 increases PV and PP but has little effect on MF. Coaches might consider prescribing AEL + RR 5 to increase especially peak aspects of velocity and power outcomes.

Combined Accentuated Eccentric Loading and Rest Redistribution in High-Volume Back Squat: Acute Stimulus and Fatigue.

ABSTRACT: Chae, S, Long, SA, Lis, RP, McDowell, KW, Wagle, JP, Carroll, KM, Mizuguchi, S, and Stone, MH. Combined accentuated eccentric loading and rest redistribution in high-volume back squat: Acute stimulus and fatigue. J Strength Cond Res 38(4): 648-655, 2024-The purpose of this study was to examine acute stimulus and fatigue responses to combined accentuated eccentric loading and rest redistribution (AEL + RR). Resistance-trained men ( n = 12, 25.6 ± 4.4 years, 1.77 ± 0.06 m, and 81.7 ± 11.4 kg) completed a back squat (BS) 1 repetition maximum (1RM) and weight releaser familiarization session. Three BS exercise conditions (sets × repetitions × eccentric-concentric loading) consisted of (a) 3 × (5 × 2) × 110/60% (AEL + RR 5), (b) 3 × (2 × 5) × 110/60% (AEL + RR 2), and (c) 3 × 10 × 60/60% 1RM (traditional sets [TS]). Weight releasers (50% 1RM) were attached to every first repetition of each cluster set (every first, third, fifth, seventh, and ninth repetition in AEL + RR 5 and every first and sixth repetition in AEL + RR 2). The AEL + RR 5 resulted in greater total volume load (sets × repetitions × eccentric + concentric loading) (6,630 ± 1,210 kg) when compared with AEL + RR 2 (5,944 ± 1,085 kg) and TS (5,487 ± 1,002 kg). In addition, AEL + RR 5 led to significantly ( p < 0.05) greater rating of perceived exertion (RPE) after set 2 and set 3 and lower blood lactate (BL) after set 3 and 5, 15, and 25 minutes postexercise than AEL + RR 2 and TS. There was a main effect of condition for BL between AEL + RR 5 (5.11 ± 2.90 mmol·L -1 ), AEL + RR 2 (6.23 ± 3.22 mmol·L -1 ), and TS (6.15 ± 3.17 mmol·L -1 ). In summary, AEL + RR 5 results in unique stimulus and fatigue responses. Although it may increase perceived exertion, coaches could use AEL + RR 5 to achieve greater back squat total volume load while reducing BL accumulation.

The difference between several neuromuscular tests for monitoring resistance-training induced fatigue.

The purposes of this study were to investigate the acute effects of resistance training protocol on kinetic changes in squat jump (SJ), shortened isometric mid-thigh pull (IMTP), and isometric squat (ISQ) and to examine the relationship of dynamic maximum strength with performance changes over 48 hours in resistance-trained individuals. Participants completed performance tests at pre-, post-24 hours, and post-48 hours resistance training protocol (Baseline, Post24, and Post48). The training protocol consisted of 5 sets of 10 repetitions of back squat (BSQ) at 60% of 1 repetition maximum (1RM). SJ variables included jump height (JH), peak power (PP), and relative PP. For the IMTP and ISQ, isometric peak force (IPF), relative IPF, rate of force development at 250 milliseconds (RFD250), and impulse at 250 milliseconds (IMP250) were calculated. Significant decreases were observed from Baseline to Post24 (p = 0.023, Cohen's dz effect size [dz] = 1.00) and Post48 (p = 0.032, dz = 0.94) in SJ JH. IMTP IMP250 significantly decreased from Baseline to Post48 (p = 0.046, dz = 0.88). Significant negative correlation was found between relative 1RM BSQ and the changes from Baseline to Post48 in ISQ RFD250 (p = 0.046,r = -0.61). Acute performance decreases might remain until 48 hours after resistance training in explosive strength and impulse regardless of isometric testing type.

Training Volume and High-Speed Loads Vary Within Microcycle in Elite North American Soccer Players.

ABSTRACT: Ishida, A, Draper, G, Wright, M, Emerson, J, and Stone, MH. Training volume and high-speed loads vary within microcycle in elite North American soccer players. J Strength Cond Res 37(11): 2229-2234, 2023-The purposes of this study were to reduce dimensionality of external training load variables and examine how the selected variables varied within microcycle in elite North American soccer players. Data were collected from 18 players during 2018-2020 in-seasons. Microcycle was categorized as 1, 2, 3, 4, 5 days before match day (MD-1, MD-2, MD-3, MD-4, and MD-5, respectively). Training load variables included total distance, average speed, maximum velocity, high-speed running distance (HSR), average HSR, HSR efforts, average HSR efforts, sprint distance, average sprint distance, sprint efforts, average sprint efforts, total PlayerLoad, and average PlayerLoad. The first principal component (PC) can explain 66.0% of the variances and be represented by "high-speed load" (e.g., HSR and sprint-related variables) with the second PC relating to "volume" (e.g., total distance and PlayerLoad) accounting for 17.9% of the variance. Average sprint distance and total distance were selected for further analysis. Average sprint distance was significantly higher at MD-3 than at MD-2 (p = 0.01, mean difference = 0.36 m•minute-1, 95% confidence intervals [CIs] = 0.07-0.65 m•minute-1) and MD-4 (p = 0.012, mean difference = 0.26 m•minute-1, 95% CIs = 0.10-0.41 m•minute-1). Total distance was significantly higher at MD-3 than at MD-1 (p < 0.001, mean difference = 1,465 m, 95% CIs = 1,003-1926 m), and MD-2 (p < 0.001, mean difference = 941 m, 95% CIs = 523-1,360 m). Principal component analysis may simplify reporting process of external training loads. Practitioners may need to choose "volume" and "high-speed load" variables. Elite North American Soccer players may accumulate higher average sprint distance at MD-3 than at other training days.

Two Days Versus Four Days of Training Cessation Following a Step-Taper in Powerlifters.

ABSTRACT: Burke, BI, Carroll, KM, Travis, SK, Stone, ME, and Stone, MH. Two days versus four days of training cessation following a step-taper in powerlifters. J Strength Cond Res 37(12): e625-e632, 2023-Tapering and training cessation are methods of training load management aimed at optimizing athlete preparedness leading into competition. Such practices are often used by strength sport athletes such as powerlifters (i.e., athletes who compete in the back squat [BS], bench press [BP], and deadlift [DL]). The purpose of this study was to compare the differences in maximal strength, subjective recovery and stress state, and body composition alterations in strength athletes undergoing a 1-week step-taper followed by either a 2-day (2D) or 4-day (4D) period of training cessation. Twelve powerlifters (22.3 ± 2.1 yrs; 92.1 ± 20.4 kg; 174.8 ± 7.5 cm) completed a 6-week training protocol aimed at peaking 1 repetition maximum (1RM) strength on BS, BP, and DL. Body composition, subjective recovery and stress state, and 1RM on BS, BP, and DL were assessed before an overreach week (T1) and after the periods of training cessation (T2) for each group. Alpha criterion was set at p ≤ 0.05. There were significant increases in BP ( p = 0.032, g = 0.10), powerlifting total ( p = 0.014, g = 0.11), and DOTS score ( p = 0.006, g = 0.12) after 2D of cessation. However, after 4D of cessation, significant increases were only observed in DL ( p = 0.019, g = 0.11) along with significant decreases in BP ( p = 0.003, g = -0.13). There were no statistically significant changes in any other variable for either group indicating that BS, psychometric, and body composition data were maintained between T1 and T2. The results of this study support the use of 1-week step-tapers, followed by a short period of training cessation (2-4D) to maintain or improve maximal strength performance.

Intrasession and Intersession Reliability of Isometric Squat, Midthigh Pull, and Squat Jump in Resistance-Trained Individuals.

ABSTRACT: Ishida, A, Suarez, DG, Travis, SK, Slaton, JA, White, JB, Bazyler, CD, and Stone, MH. Intrasession and intersession reliability of isometric squat, midthigh pull, and squat jump in resistance-trained individuals. J Strength Cond Res 37(1): 18-26, 2023-The purposes of this study were to investigate intrasession and intersession reliability of variables obtained from squat jump (SJ), shortened isometric midthigh pull (IMTP), and isometric squat (ISQ) protocols and to evaluate relationships between isometric and dynamic performance and 1 repetition maximum (1RM) back squat (BSQ). Eleven moderately resistance-trained men participated (27.8 ± 3.9 years; 175.0 ± 7.2 cm; 87.2 ± 11.4 kg). Subjects completed familiarization in the IMTP and ISQ, followed by 1RM BSQ at least 48 hours before the first performance test. Two performance tests occurred at 7-day intervals including SJ, IMTP, and ISQ. SJ variables included jump height (SJH), body mass (BM), peak force (PF), and peak power (PP). Isometric midthigh pull and ISQ variables included isometric peak force (IPF); relative IPF; rate of force development at 90, 200, and 250 milliseconds; and impulse at 90, 200, and 250 milliseconds. SJ, IMTP, and ISQ kinetic variables were considered reliable if intraclass correlations (ICCs) and coefficients of variations (CVs) were >0.80 and <10%. Intrasession and intersession reliability criteria were met for SJH, BM, PF, and PP (ICC = 0.91-1.00, CV = 0.5-9.1%). Isometric peak force and impulse at 200 and 250 milliseconds met intrasession and intersession reliability criteria for IMTP and ISQ (ICC = 0.90-0.99, CV = 2.1-8.1%). Significant large correlation was observed between 1RM BSQ and ISQ peak force (p = 0.038, r = 0.63), but not between 1RM BSQ and shortened IMTP peak force (p = 0.11, r = 0.50). Shortened IMTP and ISQ peak force and impulse are reliable kinetic variables, and ISQ peak force is indicative of 1RM BSQ in moderately resistance-trained men.

National Strength and Conditioning Association Position Statement on Weightlifting for Sports Performance.

ABSTRACT: Comfort, P, Haff, GG, Suchomel, TJ, Soriano, MA, Pierce, KC, Hornsby, WG, Haff, EE, Sommerfield, LM, Chavda, S, Morris, SJ, Fry, AC, and Stone, MH. National Strength and Conditioning Association position statement on weightlifting for sports performance. J Strength Cond Res 37(6): 1163-1190, 2023-The origins of weightlifting and feats of strength span back to ancient Egypt, China, and Greece, with the introduction of weightlifting into the Olympic Games in 1896. However, it was not until the 1950s that training based on weightlifting was adopted by strength coaches working with team sports and athletics, with weightlifting research in peer-reviewed journals becoming prominent since the 1970s. Over the past few decades, researchers have focused on the use of weightlifting-based training to enhance performance in nonweightlifters because of the biomechanical similarities (e.g., rapid forceful extension of the hips, knees, and ankles) associated with the second pull phase of the clean and snatch, the drive/thrust phase of the jerk and athletic tasks such as jumping and sprinting. The highest force, rate of force development, and power outputs have been reported during such movements, highlighting the potential for such tasks to enhance these key physical qualities in athletes. In addition, the ability to manipulate barbell load across the extensive range of weightlifting exercises and their derivatives permits the strength and conditioning coach the opportunity to emphasize the development of strength-speed and speed-strength, as required for the individual athlete. As such, the results of numerous longitudinal studies and subsequent meta-analyses demonstrate the inclusion of weightlifting exercises into strength and conditioning programs results in greater improvements in force-production characteristics and performance in athletic tasks than general resistance training or plyometric training alone. However, it is essential that such exercises are appropriately programmed adopting a sequential approach across training blocks (including exercise variation, loads, and volumes) to ensure the desired adaptations, whereas strength and conditioning coaches emphasize appropriate technique and skill development of athletes performing such exercises.

Player Position Affects Relationship Between Internal and External Training Loads During Division I Collegiate Female Soccer Season.

ABSTRACT: Ishida, A, Travis, SK, Draper, G, White, JB, and Stone, MH. Player position affects relationship between internal and external training loads during Division I collegiate female soccer season. J Strength Cond Res 36(2): 513-517, 2022-The purpose of this study was to investigate how competition phase and player position affect the relationship between internal and external training loads (ITL and ETL, respectively) in collegiate female soccer. Seventeen players participated (21.8 ± 1.7 years; 165.1 ± 6.2 cm; and 63.7 ± 7.9 kg). Nineteen match-plays (10 nonconference and 9 conference) were completed during the 2019 competitive season, including 270 observations of 17 players (defenders = 5, midfielders = 9, and forwards = 3). Internal training load was assessed using session rating of perceived exertion (sRPE). External training load included total distance and high-speed running (HSR) distance. A linear mixed model was compiled with fixed effects of total distance, HSR, competition phase, and player position (defenders, midfielders, and forwards) and random effects of player. There were statistically significant main effects for total distance (p < 0.001), HSR (p = 0.047) and player position (p = 0.045) on the prediction model of sRPE. However, the main effect of competition phase did not statistically contribute to the prediction model of sRPE (p = 0.38). In the final model, total distance (p < 0.001) and player position for forwards (p = 0.008) were significant predictors of sRPE. However, there was no statistically significant fixed effect of HSR on sRPE (p = 0.15). The final model explained 60.6% of the variance in sRPE (R2 = 0.60), whereas the random effect also explained 6.1% of the variance (R2 = 0.06). Our findings indicated that total distance and player position were strong predictors of sRPE. The relationship between ITL and ETL should be monitored by player position in female soccer players.

The Effects of 3 vs. 5 Days of Training Cessation on Maximal Strength.

ABSTRACT: Travis, SK, Mujika, I, Zwetsloot, KA, Gentles, JA, Stone, MH, and Bazyler, CD. The effects of 3 vs. 5 days of training cessation on maximal strength. J Strength Cond Res 36(3): 633-640, 2022-The purpose of this study was to compare the effects of 3 vs. 5 days of training cessation on body composition, perceived recovery and stress state, and maximal strength. Nineteen strength-trained athletes (23.8 ± 4.1 year; 90.8 ± 20.7 kg; 174.2 ± 7.3 cm) completed a powerlifting specific 4-week training block followed by either 3 or 5 days of training cessation. During the 4-week training block, athletes were trained 3 days per week, performing 3-4 movements that included at least 2-3 competition lifts per session while performing 4-5 sets of 3-5 repetitions with intensity ranging from 75 to 100% 1 repetition maximum (1RM). Body composition, psychometric measures, upper-body maximal strength, and lower-body maximal strength were assessed before (T1) and after 4 weeks of training (T2) and at 3 or 5 days of training cessation (T3). The alpha level was set at p < 0.05. After the 4-week training block (T1 to T2), trivial significant increases in body mass (p = 0.016, Hedge's g = 0.04) and bench press 1RM (p = 0.01, g = 0.16) were observed, as well as small significant increases in back squat 1RM (p < 0.001, g = 0.23), deadlift 1RM (p = 0.003, g = 0.20), powerlifting total (p < 0.001, g = 0.21), and Wilks Score (p < 0.001, g = 0.27). There were no significant differences between groups for isometric back squat performance, psychometric measures, and body composition after training cessation (T2-T3). However, small significant decreases in isometric bench press performance were observed after 5 days (p < 0.001, g = 0.16), but not 3 days of training cessation. The results of this study suggest maximal lower-body strength can be preserved during 3 and 5 days of training cessation, but maximal upper-body strength is only preserved for 3 days after 4 weeks of strength training in athletes.

Utility of a Shortened Isometric Midthigh Pull Protocol for Assessing Rapid Force Production in Athletes.

ABSTRACT: Suarez, DG, Carroll, KM, Slaton, JA, Rochau, KG, Davis, MW, and Stone, MH. Utility of a shortened isometric midthigh pull protocol for assessing rapid force production in athletes. J Strength Cond Res 36(7): 1819-1825, 2022-The purpose of this investigation was to determine the magnitude of difference, reliability, and relationship to performance of a shortened isometric midthigh pull (IMTP) protocol. Fourteen strength-trained men (age: 26.8 ± 5.0 years, height: 176.3 ± 6.9 cm, body mass: 86.8 ± 13.9 kg, and training age: 8.5 ± 6.9 years) performed 1-second (SHORT) and traditional (TRAD) IMTP protocols during consecutive weeks. Peak force (PF), instantaneous force (90 & 200 ms), rate of force development (RFD) (0-90 ms & 0-200 ms), and impulse (0-90 ms & 0-200 ms) from each protocol were collected. Paired samples t test and Hedge's g were calculated to determine the magnitude of difference in each variable between protocols. Within-session and between-session reliability was assessed with intraclass correlation coefficient, coefficient of variation, and 95% confidence intervals. Static jumps were performed to compare relationships of the IMTP variables from each protocol with jumping performance. There was no statistically significant (p > 0.05) difference in PF between the protocols (p = 0.345; g = -0.07). All early force-time variables were significantly higher in the SHORT protocol (p = <0.001-0.018; g = 0.38-0.79). The SHORT protocol resulted in more reliable RFD measures within-session. Correlations with jumping performance were mostly similar between protocols (r = 0.253-0.660). The SHORT IMTP protocol resulted in comparable PF values and considerably higher early force-time characteristics despite a restrained time to produce force and shorter rest. The SHORT protocol allows for an accurate assessment of rapid force-generating abilities while necessitating shorter collection periods than typical IMTP protocols.

Training periodization for a world-class 400 meters individual medley swimmer.

We present a case study of the periodized training by a world-class 400-m Individual Medley (IM) swimmer (4th in 2019 World Championships) in the season leading to a bronze medal in the 2018 European Championship. The complexity of this IM preparation was based on the experiences, observations and innovations of an Olympic swimming coach. Over 52 weeks, a traditional periodization model was employed using three macrocycles. A total of 15 competitions were completed in the season increasing in frequency in the third macrocycle. The training intensity distribution (TID) followed the pattern of a traditional pyramidal model in general training and polarized and threshold models during specific training before competitions. Weekly training volume ranged from 25 to 79 km, 24 to 87 km, and 25 to 90 km in each of the three macrocyles. Altitude training comprised 23% of total training weeks. Haemoglobin [Hb] increased from 14.9 to 16.0 g/100 ml and haematocrit from 45.1 to 48.1% after altitude training. Heart rate (HR) and [La-] decreased at submaximal swimming intensities, while swimming velocity increased in the 8 × 100 m incremental swimming test in A2 (1.4%) and in AT (0.6%). Pull up power was increased 10% through the season.

Characterizing the Tapering Practices of United States and Canadian Raw Powerlifters.

ABSTRACT: Travis, SK, Pritchard, HJ, Mujika, I, Gentles, JA, Stone, MH, and Bazyler, CD. Characterizing the tapering practices of United States and Canadian raw powerlifters. J Strength Cond Res 35(12S): S26-S35, 2021-The purpose of this study was to characterize the tapering practices used by North American powerlifters. A total of 364 powerlifters completed a 41-item survey encompassing demographics, general training, general tapering, and specific tapering practices. Nonparametric statistics were used to assess sex (male and female), competition level (regional/provincial, national, and international), and competition lift (squat, bench press, and deadlift). The highest training volume most frequently took place 5-8 weeks before competition, whereas the highest training intensity was completed 2 weeks before competition. A step taper was primarily used over 7-10 days while decreasing the training volume by 41-50% with varied intensity. The final heavy (>85% 1 repetition maximum [1RM]) back squat and deadlift sessions were completed 7-10 days before competition, whereas the final heavy bench press session was completed <7 days before competition. Final heavy lifts were completed at 90.0-92.5% 1RM but reduced to 75-80% 1RM for back squat and bench press and 70-75% for deadlift during the final training session of each lift. Set and repetition schemes during the taper varied between lifts with most frequent reports of 3 × 2, 3 × 3, and 3 × 1 for back squat, bench press, and deadlift, respectively. Training cessation durations before competition varied between deadlift (5.8 ± 2.5 days), back squat (4.1 ± 1.9 days), and bench press (3.9 ± 1.8 days). Complete training cessation was implemented 2.8 ± 1.1 days before competition and varied between sex and competition level. These findings provide novel insights into the tapering practices of North American powerlifters and can be used to inform powerlifting coaches and athlete's tapering decisions.

Accentuated Eccentric Loading and Cluster Set Configurations in the Back Squat: A Kinetic and Kinematic Analysis.

ABSTRACT: Wagle, JP, Cunanan, AJ, Carroll, KM, Sams, ML, Wetmore, A, Bingham, GE, Taber, CB, DeWeese, BH, Sato, K, Stuart, CA, and Stone, MH. Accentuated eccentric loading and cluster set configurations in the back squat: a kinetic and kinematic analysis. J Strength Cond Res 35(2): 420-427, 2021-This study examined the kinetic and kinematic differences between accentuated eccentric loading (AEL) and cluster sets in trained male subjects (age = 26.1 ± 4.1 years, height = 183.5 ± 4.3 cm, body mass = 92.5 ± 10.5 kg, and back squat to body mass ratio = 1.8 ± 0.3). Four load condition sessions consisted of traditionally loaded (TL) "straight sets," TL cluster (TLC) sets, AEL cluster (AEC) sets, and AEL "straight sets" where only the first repetition had eccentric overload (AEL1). An interrepetition rest interval of 30 seconds was prescribed for both TLC and AEC. Concentric intensity for all load conditions was 80% 1 repetition maximum (1RM). Accentuated eccentric loading was applied to repetitions using weight releasers with total eccentric load equivalent to 105% of concentric 1RM. Traditionally loaded cluster had statistically greater concentric outputs than TL. Furthermore, statistically greater eccentric and concentric outputs were observed during AEC compared with TL with the exception of peak power. Statistically greater concentric characteristics were observed in TLC compared with AEL1, but statistically greater eccentric outputs were observed in AEL1. In the 2 cluster set conditions, statistically greater concentric rate of force development (RFDCON) (d = 0.470, p < 0.001) and average velocity (vavg) (d = 0.560, p < 0.001) in TLC compared with AEC were observed. However, statistically greater eccentric work (WECC) (d = 2.096, p < 0.001) and eccentric RFD (RFDECC) (d = 0.424, p < 0.001) were observed in AEC compared with TLC. Overall, eccentric overload demonstrated efficacy as a means of increasing eccentric work and RFD, but not as a means of potentiating concentric output. Finally, interrepetition rest seems to have the largest influence on concentric power output and RFD.

Preliminary Investigation Into the Effect of ACTN3 and ACE Polymorphisms on Muscle and Performance Characteristics.

ABSTRACT: Wagle, JP, Carroll, KM, Cunanan, AJ, Wetmore, A, Taber, CB, DeWeese, BH, Sato, K, Stuart, CA, and Stone, MH. Preliminary investigation into the effect of ACTN3 and ACE polymorphisms on muscle and performance characteristics. J Strength Cond Res 35(3): 688-694, 2021-The purpose of this investigation was to explore the phenotypic and performance outcomes associated with ACTN3 and ACE polymorphisms. Ten trained men (age = 25.8 ± 3.0 years, height = 183.3 ± 4.1 cm, body mass = 92.3 ± 9.3 kg, and back squat to body mass ratio = 1.8 ± 0.3) participated. Blood samples were analyzed to determine ACTN3 and ACE polymorphisms. Standing ultrasonography images of the vastus lateralis (VL) were collected to determine whole muscle cross-sectional area (CSA-M), and a percutaneous muscle biopsy of the VL was collected to determine type I-specific CSA (CSA-T1), type II-specific CSA (CSA-T2), and type II to type I CSA ratio (CSA-R). Isometric squats were performed on force platforms with data used to determine peak force (IPF), allometrically scaled peak force (IPFa), and rate of force development (RFD) at various timepoints. One repetition maximum back squats were performed, whereby allometrically scaled dynamic strength (DSa) was determined. Cohen's d effect sizes revealed ACTN3 RR and ACE DD tended to result in greater CSA-M but differ in how they contribute to performance. ACTN3 RR's influence seems to be in the type II fibers, altering maximal strength, and ACE DD may influence RFD capabilities through a favorable CSA-R. Although the findings of the current investigation are limited by the sample size, the findings demonstrate the potential influence of ACTN3 and ACE polymorphisms on isometric and dynamic strength testing. This study may serve as a framework to generate hypotheses regarding the effect of genetics on performance.

Periodization and Block Periodization in Sports: Emphasis on Strength-Power Training-A Provocative and Challenging Narrative.

ABSTRACT: Stone, MH, Hornsby, WG, Haff, GG, Fry, AC, Suarez, DG, Liu, J, Gonzalez-Rave, JM, and Pierce, KC. Periodization and block periodization in sports: emphasis on strength-power training-a provocative and challenging narrative. J Strength Cond Res 35(8): 2351-2371, 2021-Periodization can be defined as a logical sequential, phasic method of manipulating fitness and recovery phases to increase the potential for achieving specific performance goals while minimizing the potential for nonfunctional over-reaching, overtraining, and injury. Periodization deals with the micromanagement of timelines and fitness phases and is cyclic in nature. On the other hand, programming deals with the micromanagement of the training process and deals with exercise selection, volume, intensity, etc. Evidence indicates that a periodized training process coupled with appropriate programming can produce superior athletic enhancement compared with nonperiodized process. There are 2 models of periodization, traditional and block. Traditional can take different forms (i.e., reverse). Block periodization has 2 subtypes, single goal or factor (individual sports) and multiple goals or factors (team sports). Both models have strengths and weaknesses but can be "tailored" through creative programming to produce excellent results for specific sports.

Preparing for a National Weightlifting Championship: A Case Series.

Travis, SK, Mizuguchi, S, Stone, MH, Sands, WA, and Bazyler, CD. Preparing for a national weightlifting championship: A case series. J Strength Cond Res 34(7): 1842-1850, 2020-This study aimed to characterize psychological, physiological, and performance changes of a high-level female (24.5 years; 53.8 ± 0.3 kg; 155.4 cm) and male (25.8 years; 92.7 ± 1.2 kg; 189 cm) weightlifter over 28 weeks while preparing for a national championship. Body mass, hydration, psychological inventories, serum biomarkers, vastus lateralis muscle cross-sectional area (CSA), and squat jump (SJ) performance were assessed weekly beginning 11 weeks from the competition date. Weightlifting performance goals were met for the female athlete (actual total = 159 kg) but not for the male athlete (actual total = 292 kg). Reductions in vastus lateralis CSA possibly took place the week leading into competition for both athletes. Both athletes reported positive recovery-stress states on the day of competition relative to baseline values. Fluctuations between steroid hormone concentrations and inflammatory markers were unpredictable and inconsistent for both athletes throughout the training program. Unloaded SJ height and rate of force development were the highest on competition day for both athletes. Based on these findings, it is possible for high-level male and female weightlifters to achieve and maintain peak preparedness 3-4 days before competition following a 1-week overreach and 3-week exponential taper, where training volume-load is reduced by half and intensity maintained or slightly increased relative to pretaper values. Furthermore, the short recovery and stress scale and SJ testing seem to be useful tools for sport scientists and coaches when monitoring high-level weightlifters preparing for competition.

Using the Session Rating of Perceived Exertion to Quantify Training Load in a Men's College Soccer Team.

Sams, ML, Wagle, JP, Sato, K, DeWeese, BH, Sayers, AL, and Stone, MH. Using the session rating of perceived exertion to quantify training load in a men's college soccer team. J Strength Cond Res 34(10): 2793-2799, 2020-The purpose of this study was to examine the training load (TL) programming of 3 training groups of a National Collegiate Athletic Association Division I men's college soccer team across a season. Thirty athletes were classified as starters (S), substitutes (NS), or redshirts (RS) based on the percentage of possible minutes played during the season. Training load was quantified at the season, phasic, and weekly levels by the session rating of perceived exertion. Between-group differences were observed at the season level (p < 0.001), and group-by-time interactions for average weekly TL were found at both the phasic (p = 0.04) and weekly levels (p < 0.001). In general, S accumulated greater TL than NS (effect size range for all analyses: -0.59 < d < 1.91) and RS (0.17 < d < 3.67), and NS accumulated greater TL than RS (-0.54 < d < 2.34). Within-group variation at the phasic level was less apparent (-0.35 < d < 1.44); however, all 3 groups displayed training variation at the weekly level (-1.80 < d < 3.24). The session rating of perceived exertion can serve as a low-cost, valid means of quantifying TL in men's college soccer athletes. Practitioners should be especially aware of the possibility of insufficient loading in NS.

Intrasession and Intersession Reliability of Countermovement Jump Testing in Division-I Volleyball Athletes.

Carroll, KM, Wagle, JP, Sole, CJ, and Stone, MH. Intrasession and intersession reliability of countermovement jump testing in Division-I volleyball athletes. J Strength Cond Res 33(11): 2932-2935, 2019-The countermovement jump (CMJ) is a reliable and noninvasive test of lower-body neuromuscular performance. Many of the investigations used to establish the reliability of CMJ have been conducted in a controlled environment (i.e., laboratory setting). To better inform coaches, reliability of key CMJ variables should be examined in a practical environment. This study assessed intrasession and intersession reliability of CMJ variables in NCAA D-I volleyball athletes. Eleven female volleyball players (age = 19.8 ± 0.8 years, height = 1.75 ± 0.07 m, body mass = 71.6 ± 8.9 kg) performed twice weekly CMJ testing on force platforms across 14 weeks of training. Dependent variables were CMJ height (CMJH), reactive strength index modified (RSIMOD), relative peak power (rPP), and countermovement depth (CM depth). Intraclass correlation coefficients (ICCs), coefficient of variation (CV), and typical error (TE) were calculated, along with Pearson correlation coefficients. Intrasession reliability revealed excellent reliability values for CMJH (ICC = 0.94, CV = 2.9 ± 2.4%, TE = 1.25) and RSIMOD (ICC = 0.93, CV = 4.7 ± 4.9, TE = 0.03). Good reliability values were observed for rPP (ICC = 0.79, CV = 6.1 ± 10.9%, TE = 4.48), with only moderate reliability for CM depth (ICC = 0.61, CV = 7.1 ± 10.9%, TE = 16.9). Intersession reliability indicated excellent reliability for CMJH (ICC = 0.92, CV = 3.2 ± 2.8%, TE = 1.4) and RSIMOD (ICC = 0.92, CV = 5.4 ± 4.3%, TE = 0.03). However, poor reliability was observed for rPP (ICC = 0.41, CV = 10.4 ± 15.4%, TE = 7.95) and CM depth (ICC = 0.39, CV = 7.7 ± 10.8%, TE = 6.42). These results suggest that in the context of weekly athlete monitoring, measures such as CMJH and RSIMOD exhibit the greatest reliability. Conversely, measures such as CM depth and rPP exhibit high levels of variability. Practitioners seeking to track jump performance over time should be cognizant of CM depth variability and its potential impact on CMJ variables.

Defining the Early, Mid, and Late Subsections of Sprint Acceleration in Division I Men's Soccer Players.

Bellon, CR, DeWeese, BH, Sato, K, Clark, KP, and Stone, MH. Defining the early, mid, and late subsections of sprint acceleration in Division I men's soccer players. J Strength Cond Res 33(4): 1001-1006, 2019-The purpose of this study was to investigate whether the acceleration phase of sprinting could be split into subphases specific to the competitive demands of a soccer match by comparing sprint metrics at various sprint distances in Division I men's soccer players. Twenty-three Division I men's soccer athletes completed 2 maximal-effort 20-m sprints from a standing start position through an optical measurement system. Sprint metrics measured included sprint velocity (SV), step length (SL), step frequency (SF), and ground contact time (GCT). Each metric was recorded at approximately 2.5, 6, and 12 m. Sprint metrics at each distance were compared using a 2-tailed, 1-way repeated-measures analysis of variance. The results indicated that SV, SL, and SF were statistically greater at 12 m in comparison with 6 m (p < 0.001) and 2.5 m (p < 0.001), whereas GCT was statistically shorter at 12 m compared with 6 m (p < 0.001) and 2.5 m (p < 0.001). In addition, sprint metrics at 6 m also displayed the same relationships when compared to 2.5 m, with SV, SL, and SF being statistically greater (p < 0.001) at this distance, and GCT being statistically shorter (p < 0.001) as well. These results suggest that the acceleration phase may effectively be differentiated into early, mid, and late subphases based on differences in key sprint metrics at distances of 2.5, 6, and 12 m, respectively, in Division I men's soccer athletes.