RESUMO
When electrocatalysts are prepared, modification of the morphology is a common strategy to enhance their electrocatalytic performance. In this work, we have examined and characterized nanorods (3D) and nanosheets (2D) of nickel molybdate hydrates, which previously have been treated as the same material with just a variation in morphology. We thoroughly investigated the materials and report that they contain fundamentally different compounds with different crystal structures, chemical compositions, and chemical stabilities. The 3D nanorod structure exhibits the chemical formula NiMoO4·0.6H2O and crystallizes in a triclinic system, whereas the 2D nanosheet structures can be rationalized with Ni3MoO5-0.5x(OH)x·(2.3 - 0.5x)H2O, with a mixed valence of both Ni and Mo, which enables a layered crystal structure. The difference in structure and composition is supported by X-ray photoelectron spectroscopy, ion beam analysis, thermogravimetric analysis, X-ray diffraction, electron diffraction, infrared spectroscopy, Raman spectroscopy, and magnetic measurements. The previously proposed crystal structure for the nickel molybdate hydrate nanorods from the literature needs to be reconsidered and is here refined by ab initio molecular dynamics on a quantum mechanical level using density functional theory calculations to reproduce the experimental findings. Because the material is frequently studied as an electrocatalyst or catalyst precursor and both structures can appear in the same synthesis, a clear distinction between the two compounds is necessary to assess the underlying structure-to-function relationship and targeted electrocatalytic properties.
RESUMO
A highly efficient regio- and stereoselective heterogeneous palladium-catalyzed hydroboration reaction of enallenes was developed. Nanopalladium immobilized on microcrystalline cellulose (MCC) was successfully employed as an efficient catalyst for the enallene hydroboration reaction. The nanopalladium particles were shown by HAADF-STEM to have an average size of 2.4â nm. The cellulose-supported palladium catalyst exhibits high stability and provides vinyl boron products in good to high isolated yields (up to 90 %). The nanopalladium catalyst can be efficiently recycled and it was demonstrated that the catalyst can be used in 7 runs with a maintained high yield (>80 %). The vinylboron compounds prepared from enallenes are important synthetic intermediates that can be used in various organic synthetic transformations.
RESUMO
Gaining control over the nanoscale assembly of different electrode components in energy storage systems can open the door for design and fabrication of new electrode and device architectures that are not currently feasible. This work presents aqueous layer-by-layer (LbL) self-assembly as a route towards design and fabrication of advanced lithium-ion batteries (LIBs) with unprecedented control over the structure of the electrode at the nanoscale, and with possibilities for various new designs of batteries beyond the conventional planar systems. LbL self-assembly is a greener fabrication route utilizing aqueous dispersions that allow various Li+ intercalating materials assembled in complex 3D porous substrates. The spatial precision of positioning of the electrode components, including ion intercalating phase and electron-conducting phase, is down to nanometer resolution. This capable approach makes a lithium titanate anode delivering a specific capacity of 167 mAh g-1 at 0.1C and having comparable performances to conventional slurry-cast electrodes at current densities up to 100C. It also enables high flexibility in the design and fabrication of the electrodes where various advanced multilayered nanostructures can be tailored for optimal electrode performance by choosing cationic polyelectrolytes with different molecular sizes. A full-cell LIB with excellent mechanical resilience is built on porous insulating foams.
RESUMO
A highly selective and efficient oxidative carbocyclization/borylation of enallenols catalyzed by palladium immobilized on amino-functionalized siliceous mesocellular foam (Pd-AmP-MCF) was developed for diastereoselective cyclobutenol synthesis. The heterogeneous palladium catalyst can be recovered and recycled without any observed loss of activity or selectivity. The high diastereoselectivity of the reaction is proposed to originate from a directing effect of the enallenol hydroxyl group. Optically pure cyclobutenol synthesis was achieved by the heterogeneous strategy by using chiral enallenol obtained from kinetic resolution.
RESUMO
Herein, we report on the use a biohybrid catalyst consisting of palladium nanoparticles immobilized on cross-linked enzyme aggregates of lipaseâ B of Candida antarctica (CalB CLEA) for the dynamic kinetic resolution (DKR) of benzylic amines. A set of amines were demonstrated to undergo an efficient DKR and the recyclability of the catalysts was studied. Extensive efforts to further elucidate the structure of the catalyst are presented.
RESUMO
Herein, we report on the utilization of a heterogeneous catalyst, consisting of Pd nanoparticles supported on a siliceous mesocellular foam (Pd0 -AmP-MCF), for the synthesis of heterocycles. Reaction of o-iodophenols and protected o-iodoanilines with acetylenes in the presence of a Pd nanocatalyst produced 2-substituted benzofurans and indoles, respectively. In general, the catalytic protocol afforded the desired products in good to excellent yields under mild reaction conditions without the addition of ligands. Moreover, the structure of the reported Pd nanocatalyst was further elucidated with extended X-ray absorption fine-structure spectroscopy, and it was proven that the catalyst could be recycled multiple times without significant loss of activity.
RESUMO
Chemoselective reduction of the C=C bond in a variety of α,ß-unsaturated carbonyl compounds using supported palladium nanoparticles is reported. Three different heterogeneous catalysts were compared using 1 atm of H2 : 1)â nano-Pd on a metal-organic framework (MOF: Pd(0) -MIL-101-NH2 (Cr)), 2)â nano-Pd on a siliceous mesocellular foam (MCF: Pd(0) -AmP-MCF), and 3)â commercially available palladium on carbon (Pd/C). Initial studies showed that the Pd@MOF and Pd@MCF nanocatalysts were superior in activity and selectivity compared to commercial Pd/C. Both Pd(0) -MIL-101-NH2 (Cr) and Pd(0) -AmP-MCF were capable of delivering the desired products in very short reaction times (10-90â min) with low loadings of Pd (0.5-1â mol %). Additionally, the two catalytic systems exhibited high recyclability and very low levels of metal leaching.
RESUMO
Herein, a practical and mild method for the deoxygenation of a wide range of benzylic aldehydes and ketones is described, which utilizes heterogeneous Pd/C as the catalyst together with the green hydride source, polymethylhydrosiloxane. The developed catalytic protocol is scalable and robust, as exemplified by the deoxygenation of ethyl vanillin, which was performed on a 30â mmol scale in an open-to-air setup using only 0.085â mol % Pd/C catalyst to furnish the corresponding deoxygenated product in 93 % yield within 3â hours at room temperature. Furthermore, the Pd/C catalyst was shown to be recyclable up to 6 times without any observable decrease in efficiency and it exhibited low metal leaching under the reaction conditions.
Assuntos
Aldeídos/química , Carbono/química , Cetonas/química , Paládio/química , Substâncias Redutoras/química , Siloxanas/química , Benzaldeídos/química , Catálise , Espectroscopia de Ressonância Magnética , Oxirredução , TemperaturaRESUMO
A simple and efficient method to prepare synthetically useful 2-arylindoles is presented, using a heterogeneous Pd catalyst and diaryliodonium salts in water under mild conditions. A remarkably low leaching of metal catalyst was observed under the applied conditions. The developed protocol is highly C-2 selective and tolerates structural variations both in the indole and in the diaryliodonium salt. Arylations of both N-H indoles and N-protected indoles with ortho-substituted, electron-rich, electron-deficient, or halogenated diaryliodonium salts were achieved to give the desired products in high to excellent isolated yields within 6 to 15 h at room temperature or 40 °C.
Assuntos
Hidrocarbonetos Aromáticos/síntese química , Indóis/síntese química , Iodo/química , Paládio/química , Sais/química , Catálise , Hidrocarbonetos Aromáticos/química , Indóis/química , Nanoestruturas/química , Nanoestruturas/ultraestruturaRESUMO
A highly dispersed nanopalladium catalyst supported on mesocellular foam (MCF), was successfully used in the heterogeneous catalysis of aminocarbonylation reactions. During the preliminary evaluation of this catalyst it was discovered that the supported palladium nanoparticles exhibited a "release and catch" effect, meaning that a minor amount of the heterogeneous palladium became soluble and catalyzed the reaction, after which it re-deposited onto the support.
Assuntos
Hidrocarbonetos Aromáticos/química , Iodetos/química , Nanopartículas Metálicas/química , Paládio/química , Amidas/química , Aminação , Aminas/química , CatáliseRESUMO
Herein is described a versatile and broad synergistic strategy for expansion of chemical space and the synthesis of valuable molecules (e.g. carbocycles and heterocycles), with up to three quaternary stereocenters, in a highly enantioselective fashion from simple alcohols (31 examples, 95:5 to >99.5:0.5 e.r.) using integrated heterogeneous metal/chiral amine multiple relay catalysis and air/O2 as the terminal oxidant. A novel highly 1,4-selective heterogeneous metal/amine co-catalyzed hydrogenation of enals was also added to the relay catalysis sequences.
RESUMO
Electron magnetic circular dichroism (EMCD) is a powerful technique for estimating element-specific magnetic moments of materials on nanoscale with the potential to reach atomic resolution in transmission electron microscopes. However, the fundamentally weak EMCD signal strength complicates quantification of magnetic moments, as this requires very high precision, especially in the denominator of the sum rules. Here, we employ a statistical resampling technique known as bootstrapping to an experimental EMCD dataset to produce an empirical estimate of the noise-dependent error distribution resulting from application of EMCD sum rules to bcc iron in a 3-beam orientation. We observe clear experimental evidence that noisy EMCD signals preferentially bias the estimation of magnetic moments, further supporting this with error distributions produced by Monte-Carlo simulations. Finally, we propose guidelines for the recognition and minimization of this bias in the estimation of magnetic moments.
RESUMO
We provide experimental evidence that is inconsistent with often proposed Langmuir-Hinshelwood (LH) mechanistic hypotheses for water-promoted CO oxidation over Au-Fe2O3. Passing CO and H2O, but no O2, over Au-γ-Fe2O3 at 25 °C, we observe significant CO2 production, inconsistent with LH mechanistic hypotheses. Experiments with H218O further show that previous LH mechanistic proposals cannot account for water-promoted CO oxidation over Au-γ-Fe2O3. Guided by density functional theory, we instead postulate a water-promoted Mars-van Krevelen (w-MvK) reaction. Our proposed w-MvK mechanism is consistent both with observed CO2 production in the absence of O2 and with CO oxidation in the presence of H218O and 16O2. In contrast, for Au-TiO2, our data is consistent with previous LH mechanistic hypotheses.
RESUMO
The rising demand for high-performance lithium-ion batteries, pivotal to electric transportation, hinges on key materials like the Ni-rich layered oxide LiNixCoyAlzO2 (NCA) used in cathodes. The present study investigates the redox mechanisms, with particular focus on the role of oxygen in commercial NCA electrodes, both fresh and aged under various conditions (aged cells have performed >900 cycles until a cathode capacity retention of â¼80%). Our findings reveal that oxygen participates in charge compensation during NCA delithiation, both through changes in transition metal (TM)-O bond hybridization and formation of partially reversible O2, the latter occurs already below 3.8 V vs. Li/Li+. Aged NCA material undergoes more significant changes in TM-O bond hybridization when cycling above 50% SoC, while reversible O2 formation is maintained. Nickel is found to be redox active throughout the entire delithiation and shows a more classical oxidation state change during cycling with smaller changes in the Ni-O hybridization. By contrast, Co redox activity relies on a stronger change in Co-O hybridization, with only smaller Co oxidation state changes. The Ni-O bond displays an almost twice as large change in its bond length on cycling as the Co-O bond. The Ni-O6 octahedra are similar in size to the Co-O6 octahedra in the delithiated state, but are larger in the lithiated state, a size difference that increases with battery ageing. These contrasting redox activities are reflected directly in structural changes. The NCA material exhibits the formation of nanopores upon ageing, and a possible connection to oxygen redox activity is discussed. The difference in interaction of Ni and Co with oxygen provides a key understanding of the mechanism and the electrochemical instability of Ni-rich layered transition metal oxide electrodes. Our research specifically highlights the significance of the role of oxygen in the electrochemical performance of electric-vehicle-grade NCA electrodes, offering important insights for the creation of next-generation long-lived lithium-ion batteries.
RESUMO
Li-containing alloys and metallic deposits offer substantial Li+ storage capacities as alternative anodes to commercial graphite. However, the thermodynamically in sequence, yet kinetically competitive mechanism between Li solubility in the solid solution and intermediate alloy-induced Li deposition remains debated, particularly across the multiple scales. The elucidation of the mechanism is rather challenging due to the dynamic alloy evolution upon the non-equilibrium, transient lithiation processes under coupled physical fields. Here, influential factors governing Li solubility in the Li-Zn alloy are comprehensively investigated as a demonstrative model, spanning from the bulk electrolyte solution to the ion diffusion within the electrode. Through real-time phase tracking and spatial distribution analysis of intermediate alloy/Li metallic species at varied temperatures, current densities and particle sizes, the driving force of Li solubility and metallic plating along the Li migration pathway are probed in-depth. This study investigates the correlation between kinetics (pronounced concentration polarization, miscibility gap in lattice grains) and rate-limiting interfacial charge transfer thermodynamics in dedicating the Li diffusion into the solid solution. Additionally, the lithiophilic alloy sites with the balanced diffusion barrier and Li adsorption energy are explored to favor the homogeneous metal plating, which provides new insights for the rational innovation of high-capacity alloy/metallic anodes.
RESUMO
Herein, we describe efficient nanogold-catalyzed cycloisomerization reactions of alkynoic acids and allenynamides to enol lactones and dihydropyrroles, respectively (the latter via an Alder-ene reaction). The gold nanoparticles were immobilized on thiol-functionalized microcrystalline cellulose and characterized by electron microscopy (HAADF-STEM) and by XPS. The thiol-stabilized gold nanoparticles (Au0) were obtained in the size range 1.5-6 nm at the cellulose surface. The robust and sustainable cellulose-supported gold nanocatalyst can be recycled for multiple cycles without losing activity.
RESUMO
Celulose nanofibers are lightweight, recycable, biodegradable, and renewable. Hence, there is a great interest of using them instead of fossil-based components in new materials and biocomposites. In this study, we disclose an environmentally benign (green) one-step reaction approach to fabricate lactic acid ester functionalized cellulose nanofibrils from wood-derived pulp fibers in high yields. This was accomplished by converting wood-derived pulp fibers to nanofibrillated "cellulose lactate" under mild conditions using lactic acid as both the reaction media and catalyst. Thus, in parallel to the cellulose nanofibril production, concurrent lactic acid-catalyzed esterification of lactic acid to the cellulose nanofibers surface occured. The direct lactic acid esterification, which is a surface selective functionalization and reversible (de-attaching the ester groups by cleavage of the ester bonds), of the cellulose nanofibrils was confirmed by low numbers of degree of substitution, and FT-IR analyses. Thus, autocatalytic esterification and cellulose hydrolysis occurred without the need of metal based or a harsh mineral acid catalysts, which has disadvantages such as acid corrosiveness and high recovery cost of acid. Moreover, adding a mineral acid as a co-catalyst significantly decreased the yield of the nanocellulose. The lactic acid media is successfully recycled in multiple reaction cycles producing the corresponding nanocellulose fibers in high yields. The disclosed green cellulose nanofibril production route is industrial relevant and gives direct access to nanocellulose for use in variety of applications such as sustainable filaments, composites, packaging and strengthening of recycled fibers.
RESUMO
The need to acquire multiple angle-resolved electron energy loss spectra (EELS) is one of the several critical challenges associated with electron magnetic circular dichroism (EMCD) experiments. If the experiments are performed by scanning a nanometer to atomic-sized electron probe on a specific region of a sample, the precision of the local magnetic information extracted from such data highly depends on the accuracy of the spatial registration between multiple scans. For an EMCD experiment in a 3-beam orientation, this means that the same specimen area must be scanned four times while keeping all the experimental conditions same. This is a non-trivial task as there is a high chance of morphological and chemical modification as well as non-systematic local orientation variations of the crystal between the different scans due to beam damage, contamination and spatial drift. In this work, we employ a custom-made quadruple aperture to acquire the four EELS spectra needed for the EMCD analysis in a single electron beam scan, thus removing the above-mentioned complexities. We demonstrate a quantitative EMCD result for a beam convergence angle corresponding to sub-nm probe size and compare the EMCD results for different detector geometries.
RESUMO
C60 nanorods with hexagonal cross sections are grown using a static liquid-liquid interfacial precipitation method in a system of C60/m-dichlorobenzene solution and ethanol. Adding water to the ethanol phase leads instead to C60 tubes where both length and diameter of the C60 tubes can be controlled by the water content in the ethanol. Based on our observations we find that the diameter of the rods/tubes strongly depends on the nucleation step. We propose a liquid-liquid interface growth model of C60 rods and tubes based on the diffusion rate of the good C60 containing solvent into the poor solvent as well as on the size of the crystal seeds formed at the interface between the two solvents. The grown rods and tubes exhibit a hexagonal solvate crystal structure with m-dichlorobenzene solvent molecules incorporated into the crystal structure, independent of the water content. An annealing step at 200 °C at a pressure < 1 kPa transforms the grown structures into a solvent-free face centered cubic structure. Both the hexagonal and the face centered cubic structures are very stable and neither morphology nor structure shows any signs of degradation after three months of storage.
Assuntos
Fulerenos/química , Nanoestruturas/química , Água/química , Precipitação Química , Etanol/química , Nanoestruturas/ultraestruturaRESUMO
Herein, we describe an efficient nanocopper-catalyzed Alder-ene reaction of allenynamides. The copper nanoparticles were immobilized on amino-functionalized microcrystalline cellulose. A solvent-controlled chemoselectivity of the reaction was observed, leading to the chemodivergent synthesis of pyrrolines (2,5-dihydropyrroles) and pyrroles. The heterogeneous copper catalyst exhibits high efficiency and good recyclability in the Alder-ene reaction, constituting a highly attractive catalytic system from an economical and environmental point of view.