Lipophilic prodrug conjugates allow facile and rapid synthesis of high-loading capacity liposomes without the need for post-assembly purification.

Dihydropyridopyrazoles are simplified synthetic analogues of podophyllotoxin that can effectively mimic its molecular scaffold and act as potent mitotic spindle poisons in dividing cancer cells. However, despite nanomolar potencies and ease of synthetic preparation, further clinical development of these promising anticancer agents is hampered due to their poor aqueous solubility. In this article, we developed a prodrug strategy that enables incorporation of dihydropyridopyrazoles into liposome bilayers to overcome the solubility issues. The active drug was covalently connected to either myristic or palmitic acid anchor via carboxylesterase hydrolyzable linkage. The resulting prodrugs were self-assembled into liposome bilayers from hydrated lipid films using ultrasound without the need for post-assembly purification. The average particle size of the prodrug-loaded liposomes was about 90 nm. The prodrug incorporation was verified by differential scanning calorimetry, spectrophotometry and gel filtration reaching maximum at 0.3 and 0.35 prodrug/lipid molar ratios for myristic and palmitic conjugates, respectively. However, the ratio of 0.2 was used in the particle size and biological activity experiments to maintain long-term stability of the prodrug-loaded liposomes against phase separation during storage. Antiproliferative activity was tested against HeLa and Jurkat cancer cell lines in vitro showing that the liposomal prodrug retained antitubulin activity of the parent drug and induced apoptosis-mediated cancer cell death. Overall, the established data provide a powerful platform for further clinical development of dihydropyridopyrazoles using liposomes as the drug delivery system.

Simultaneous High-Frame-Rate Acoustic Plane-Wave and Optical Imaging of Intracranial Cavitation in Polyacrylamide Brain Phantoms during Blunt Force Impact.

Blunt and blast impacts occur in civilian and military personnel, resulting in traumatic brain injuries necessitating a complete understanding of damage mechanisms and protective equipment design. However, the inability to monitor in vivo brain deformation and potential harmful cavitation events during collisions limits the investigation of injury mechanisms. To study the cavitation potential, we developed a full-scale human head phantom with features that allow a direct optical and acoustic observation at high frame rates during blunt impacts. The phantom consists of a transparent polyacrylamide material sealed with fluid in a 3D-printed skull where windows are integrated for data acquisition. The model has similar mechanical properties to brain tissue and includes simplified yet key anatomical features. Optical imaging indicated reproducible cavitation events above a threshold impact energy and localized cavitation to the fluid of the central sulcus, which appeared as high-intensity regions in acoustic images. An acoustic spectral analysis detected cavitation as harmonic and broadband signals that were mapped onto a reconstructed acoustic frame. Small bubbles trapped during phantom fabrication resulted in cavitation artifacts, which remain the largest challenge of the study. Ultimately, acoustic imaging demonstrated the potential to be a stand-alone tool, allowing observations at depth, where optical techniques are limited.

Mechanical characterization data of polyacrylamide hydrogel formulations and 3D printed PLA for application in human head phantoms.

To study human traumatic brain injury (TBI) mechanics, a realistic surrogate must be developed for testing in impact experiments. In this data brief, materials used to simulate brain tissue and skull are characterized for application in a full-scale human head phantom. Polyacrylamide hydrogels are implemented as tissue scaffolds and tissue mimics because they are bioinert and tunable. These properties make them ideal for use as brain tissue in studies that simulate head impacts. The objective is to modify hydrogel formulations to have minimal swelling and optical clarity while maintaining properties that mimic brain tissue, such as density, viscoelastic properties, and rheological properties. Secondly, polylactic acid (PLA) polymers are 3D printed to create biomimetic skulls to enclose the hydrogel brain tissue mimic or brain phantom. PLA samples are printed and tested to determine their mechanical strength with the intention of roughly matching human skull properties. Hydrogel data was obtained with an oscillatory rheometer, while PLA samples were tested using a mechanical tester with a 3-point bend setup. The present data brief highlights several hydrogel formulations and compares them to identify the benefits of each formula and reports mechanical values of 3D printed PLA samples with 100% grid infill patterns applied in a skull model.

Characterization of material properties and deformation in the ANGUS phantom during mild head impacts using MRI.

Traumatic brain injury (TBI) is a major health concern affecting both military and civilian populations. Despite notable advances in TBI research in recent years, there remains a significant gap in linking the impulsive loadings from a blast or a blunt impact to the clinical injury patterns observed in TBI. Synthetic head models or phantoms can be used to establish this link as they can be constructed with geometry, anatomy, and material properties that match the human brain, and can be used as an alternative to animal models. This study presents one such phantom called the Anthropomorphic Neurologic Gyrencephalic Unified Standard (ANGUS) phantom, which is an idealized gyrencephalic brain phantom composed of polyacrylamide gel. Here we mechanically characterized the ANGUS phantom using tagged magnetic resonance imaging (MRI) and magnetic resonance elastography (MRE), and then compared the outcomes to data obtained in healthy volunteers. The direct comparison between the phantom's response and the data from a cohort of in vivo human subjects demonstrate that the ANGUS phantom may be an appropriate model for bulk tissue response and gyral dynamics of the human brain under small amplitude linear impulses. However, the phantom's response differs from that of the in vivo human brain under rotational impacts, suggesting avenues for future improvements to the phantom.

Sulcal Cavitation in Linear Head Acceleration: Possible Correlation With Chronic Traumatic Encephalopathy.

Traumatic Brain Injury (TBI) is a significant public health and financial concern that is affecting tens of thousands of people in the United States annually. There were over a million hospital visits related to TBI in 2017. Along with immediate and short-term morbidity from TBI, chronic traumatic encephalopathy (CTE) can have life-altering, chronic morbidity, yet the direct linkage of how head impacts lead to this pathology remains unknown. A possible clue is that chronic traumatic encephalopathy appears to initiate in the depths of the sulci. The purpose of this study was to isolate the injury mechanism/s associated with blunt force impact events. To this end, drop tower experiments were performed on a human head phantom. Our phantom was fabricated into a three-dimensional extruded ellipsoid geometry made out of Polyacrylamide gelatin that incorporated gyri-sulci interaction. The phantom was assembled into a polylactic acid 3D-printed skull, surrounded with deionized water, and enclosed between two optical windows. The phantom received repetitive low-force impacts on the order of magnitude of an average boxing punch. Intracranial pressure profiles were recorded in conjunction with high-speed imaging, 25 k frames-per-second. Cavitation was observed in all trials. Cavitation is the spontaneous formation of vapor bubbles in the liquid phase resulting from a pressure drop that reaches the vapor pressure of the liquid. The observed cavitation was predominately located in the contrecoup during negative pressure phases of local intracranial pressure. To further investigate the cavitation interaction with the brain tissue phantom, a 2D plane strain computational model was built to simulate the deformation of gyrated tissue as a result from the initiation of cavitation bubbles seen in the phantom experiments. These computational experiments demonstrated a focusing of strain at the depths of the sulci from bubble expansion. Our results add further evidence that mechanical interactions could contribute to the development of chronic traumatic encephalopathy and also that fluid cavitation may play a role in this interaction.

Phospholipid prodrug conjugates of insoluble chemotherapeutic agents for ultrasound targeted drug delivery.

The hydrophobicity and high potency of many therapeutic agents makes them difficult to use effectively in clinical practice. This work focuses on conjugating phospholipid tails (2T) onto podophyllotoxin (P) and its analogue (N) using a linker and characterizing the effects of their incorporation into lipid-based drug delivery vehicles for triggered ultrasound delivery. Differential Scanning Calorimetry results show that successfully synthesized lipophilic prodrugs, 2T-P (~28 % yield) and 2T-N(~26 % yield), incorporate within the lipid membranes of liposomes. As a result of this, increased stability and incorporation are observed in 2T-P and 2T-N in comparison to the parent compounds P and N. Molecular dynamic simulation results support that prodrugs remain within the lipid membrane over a relevant range of concentrations. 2T-N's (IC50: 20 nM) biological activity was retained in HeLa cells (cervical cancer), whereas 2T-P's (IC50: ~4 µM) suffered, presumably due to steric hindrance. Proof-of-concept studies using ultrasound in vitro microbubble and nanodroplet delivery vehicles establish that these prodrugs are capable of localized drug delivery. This study provides useful information about the synthesis of double tail analogues of insoluble chemotherapeutic agents to facilitate incorporation into drug delivery vehicles. The phospholipid attachment strategy presented here could be applied to other well suited drugs such as gemcitabine, commonly known for its treatment of pancreatic cancer.

Materials Characterization of Cranial Simulants for Blast-Induced Traumatic Brain Injury.

INTRODUCTION: The mechanical response of brain tissue to high-speed forces in the blast and blunt traumatic brain injury is poorly understood. Object-to-object variation and interspecies differences are current limitations in animal and cadaver studies conducted to study damage mechanisms. Biofidelic and transparent tissue simulants allow the use of high-speed optical diagnostics during a blast event, making it possible to observe deformations and damage patterns for comparison to observed injuries seen post-mortem in traumatic brain injury victims. METHODS: Material properties of several tissue simulants were quantified using standard mechanical characterization techniques, that is, shear rheometric, tensile, and compressive testing. RESULTS: Polyacrylamide simulants exhibited the best optical and mechanical property matching with the fewest trade-offs in the design of a cranial test object. Polyacrylamide gels yielded densities of ~1.04 g/cc and shear moduli ranging 1.3-14.55 kPa, allowing gray and white matter simulant tuning to a 30-35% difference in shear for biofidelity. CONCLUSIONS: These materials are intended for use as layered cranial phantoms in a shock tube and open field blasts, with focus on observing phenomena occurring at the interfaces of adjacent tissue simulant types or material-fluid boundaries. Mechanistic findings from these studies may be used to inform the design of protective gear to mitigate blast injuries.

CVD for the facile synthesis of hybrid nanobiomaterials integrating functional supramolecular assemblies.

In this letter, we present a simple one-step, versatile, scalable chemical vapor deposition (CVD)-based process for the encapsulation and stabilization of a host of single or multicomponent supramolecular assemblies (proteoliposomes, microbubbles, lipid bilayers, and photosynthetic antennae complexes and other biological materials) to form functional hybrid nanobiomaterials. In each case, it is possible (i) to form thin silica layers or gels controllably that enable the preservation of the supramolecular assembly over time and under adverse environmental conditions and (ii) to tune the structure of the silica gels so as to optimize solute accessibility while at the same time preserving functional dynamic properties of the encapsulated phospholipid assembly. The process allows precise temporal and spatial control of silica polymerization kinetics through the control of precursor delivery at room temperature and does not require or produce high concentrations of injurious chemicals that can compromise the function of biomolecular assemblies; it also does not require additives. This process differs from the conventional sol-gel process in that it does not involve the use of cosolvents (alcohols) and catalysts (acid or base).

Long-circulating liposomes radiolabeled with [18F]fluorodipalmitin ([18F]FDP).

Synthesis of a radiolabeled diglyceride, 3-[(18)F]fluoro-1,2-dipalmitoylglycerol [[(18)F]fluorodipalmitin ([(18)F]FDP)], and its potential as a reagent for radiolabeling long-circulating liposomes were investigated. The incorporation of (18)F into the lipid molecule was accomplished by nucleophilic substitution of the p-toluenesulfonyl moiety with a decay-corrected yield of 43+/-10% (n=12). Radiolabeled, long-circulating polyethylene-glycol-coated liposomes were prepared using a mixture of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine, cholesterol, 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000] ammonium salt (61:30:9) and [(18)F]FDP with a decay-corrected yield of 70+/-8% (n=4). PET imaging and biodistribution studies were performed with free [(18)F]FDP and liposome-incorporated [(18)F]FDP. Freely injected [(18)F]FDP had the highest uptake in the liver, spleen and lungs. Liposomal [(18)F]FDP remained in blood circulation at near-constant levels for at least 90 min, with a peak concentration near 2.5%ID/cc. Since [(18)F]FDP was incorporated into the phospholipid bilayer, it could potentially be used for radiolabeling a variety of lipid-based drug carriers.

Control over Silica Particle Growth and Particle-Biomolecule Interactions Facilitates Silica Encapsulation of Mammalian Cells with Thickness Control.

Over the last twenty years, many strategies utilizing sol-gel chemistry to integrate biological cells into silica-based materials have been reported. One such strategy, Sol-Generating Chemical Vapor into Liquid (SG-CViL) deposition, shows promise as an efficient encapsulation technique due to the ability to vary the silica encapsulation morphology obtained by this process through variation of SG-CViL reaction conditions. In this report, we develop SG-CViL as a tunable, multi-purpose silica encapsulation strategy by investigating the mechanisms governing both silica particle generation and subsequent interaction with phospholipid assemblies (liposomes and living cells). Using Dynamic Light Scattering (DLS) measurements, linear and exponential silica particle growth dynamics were observed which were dependent on deposition buffer ion constituents and ion concentration. Silica particle growth followed a cluster-cluster growth mechanism at acidic pH, and a monomer-cluster growth mechanism at neutral to basic pH. Increasing silica sol aging temperature resulted in higher rates of particle growth and larger particles. DLS measurements employing PEG coated liposomes and cationic liposomes, serving as model phospholipid assemblies, revealed electrostatic interactions promote more stable liposome-silica interactions than hydrogen bonding and facilitate silica coating on suspension cells. However, continued silica reactivity leads to aggregation of silica coated suspensions cells, revealing the need for cell isolation to tune deposited silica thickness. Utilizing these mechanistic study insights, silica was deposited onto adherent HeLa cells under biocompatible conditions with micron scale control over silica thickness, minimal cell manipulation steps, and retained cell viability over several days.

Therapeutic effects of paclitaxel-containing ultrasound contrast agents.

Drug delivery vehicles that combine ultrasonic and molecular targeting are shown to locally concentrate a drug in a region-of-interest. The drug delivery vehicles, referred to as acoustically active lipospheres (AALs), are microbubbles surrounded by a shell of oil and lipid. In a region limited to the focal area of ultrasound application, circulating AALs are deflected by radiation force to a vessel wall and can subsequently be fragmented. Ligands targeting the alphavbeta3 integrin are conjugated to the AAL shell and increase in vitro binding by 26.5-fold over nontargeted agents. Toxicity assays demonstrate that paclitaxel-containing AALs exert a greater antiproliferative effect after insonation than free paclitaxel at an equivalent concentration. Lastly, ultrasound and molecular targeting are combined to deliver a model drug to the endothelium and interstitium of chorioallantoic membrane vasculature in vivo.

Sol-Generating Chemical Vapor into Liquid (SG-CViL) Deposition- A Facile Method for Encapsulation of Diverse Cell Types in Silica Matrices.

In nature, cells perform a variety of complex functions such as sensing, catalysis, and energy conversion which hold great potential for biotechnological device construction. However, cellular sensitivity to ex-vivo environments necessitates development of bio-nano interfaces which allow integration of cells into devices and maintain their desired functionality. In order to develop such an interface, the use of a novel Sol Generating Chemical Vapor into Liquid (SG-CViL) deposition process for whole cell encapsulation in silica was explored. In SG-CViL, the high vapor pressure of tetramethyl orthosilicate (TMOS) is utilized to deliver silica into an aqueous medium, creating a silica sol. Cells are then mixed with the resulting silica sol, facilitating encapsulation of cells in silica while minimizing cell contact with the cytotoxic products of silica generating reactions (i.e. methanol), and reduce exposure of cells to compressive stresses induced from silica condensation reactions. Using SG-CVIL, Saccharomyces cerevisiae (S. cerevisiae) engineered with an inducible beta galactosidase system were encapsulated in silica solids and remained both viable and responsive 29 days post encapsulation. By tuning SG-CViL parameters thin layer silica deposition on mammalian HeLa and U87 human cancer cells was also achieved. The ability to encapsulate various cell types in either a multi cell (S. cerevisiae) or a thin layer (HeLa and U87 cells) fashion shows the promise of SG-CViL as an encapsulation strategy for generating cell-silica constructs with diverse functions for incorporation into devices for sensing, bioelectronics, biocatalysis, and biofuel applications.

Dynamic microPET imaging of ultrasound contrast agents and lipid delivery.

Interest in ultrasound contrast agents (lipid-shelled microbubbles) as delivery vehicles is increasing; however, the biodistribution of these agents remains uncharacterized, both with and without ultrasound. In this study, an (18)F-labeled lipid ([(18)F]fluorodipalmitin), incorporated in microbubble shells, was used as a dynamic microPET probe for quantitative 90-minute biodistribution measurements in male Fischer 344 rats (n=2). The spleen retained the highest concentration of radioactive lipid at approximately 2.6%-injected dose per cubic centimeter (% ID/cc) and the liver demonstrated the largest total accumulation (approximately 17% ID). The microbubble pharmacokinetic profile differed from free lipid, which is rapidly cleared from blood, and liposomes, which remain in circulation. Additionally, region of interest (ROI) analysis over 60 minutes (post-ultrasound treatment) quantified the delivery of lipid by therapeutic ultrasound from microbubbles to kidney tissue (n=8). The ultrasound sequence consisted of a 200 kPa, 5.3 MHz radiation force pulse followed by a 1.6 MPa, 1.4 MHz fragmentation pulse and was applied to one kidney, while the contralateral kidney served as a control. ROI-estimated activity in treated kidneys was slightly but significantly greater at 0 and 60 min than in untreated kidneys (p=0.0012 and 0.0035, respectively). This effect increased with the number of microbubbles injected (p=0.006). In summary, [(18)F]fluorodipalmitin was used to characterize the biodistribution of contrast microbubble shells and the deposition of lipid was shown to be locally increased after insonation.