Short-term health effects in the general population following a major train accident with acrylonitrile in Belgium.

BACKGROUND: Following a train derailment, several tons of acrylonitrile (ACN) exploded, inflamed and part of the ACN ended up in the sewage system of the village of Wetteren. More than 2000 residents living in the close vicinity of the accident and along the sewage system were evacuated. A human biomonitoring study of the adduct N-2-cyanoethylvaline (CEV) was carried out days 14-21 after the accident. OBJECTIVES: (1) To describe the short-term health effects that were reported by the evacuated residents following the train accident, and (2) to explore the association between the CEV concentrations, extrapolated at the time of the accident, and the self-reported short-term health effects. METHODS: Short-term health effects were reported in a questionnaire (n=191). An omnibus test of independence was used to investigate the association between the CEV concentrations and the symptoms. Dose-response relationships were quantified by Generalized Additive Models (GAMs). RESULTS: The most frequently reported symptoms were local symptoms of irritation. In non-smokers, dose-dependency was observed between the CEV levels and the self-reporting of irritation (p=0.007) and nausea (p=0.007). Almost all non-smokers with CEV concentrations above 100pmol/g globin reported irritation symptoms. Both absence and presence of symptoms was reported by non-smokers with CEV concentrations below the reference value and up to 10 times the reference value. Residents who visited the emergency services reported more symptoms. This trend was seen for the whole range of CEV concentrations, and thus independently of the dose. DISCUSSION AND CONCLUSION: The present study is one of the first to relate exposure levels to a chemical released during a chemical incident to short-term (self-reported) health effects. A dose-response relation was observed between the CEV concentrations and the reporting of short-term health effects in the non-smokers. Overall, the value of self-reported symptoms to assess exposure showed to be limited. The results of this study confirm that a critical view should be taken when considering self-reported health complaints and that ideally biomarkers are monitored to allow an objective assessment of exposure.

Analysis of fluoride in toothpastes on the Belgian market.

We developed a method for the quantitative determination of sodium fluoride (NaF), sodium monofluorophosphate (SMFP) and amine fluoride (AmF) in toothpastes on the Belgian market. Samples were suspended in water and the determination was made using anion chromatography with conductivity detection after chemical suppression. The described ion chromatographic method is an easy and reliable isocratic high-performance liquid chromatography method for the determination of total soluble fluoride content in toothpastes. The analytical repeatability and reproducibility, the matrix effects and the method's decision limit of three different toothpastes containing NaF, SMFP and AmF at a concentration close to the permitted one of 0.15 g % total F are determined. All the samples analysed are in conformity with the Cosmetics Directive 76/768/EC; none exceeds the limit of 0.15 g %.

Use of Tenax® films to demonstrate the migration of chemical contaminants from cardboard into dry food.

Contaminants in food packaging are a challenge of our time since the packaging material itself has been found to represent a source of food contamination through the migration of substances from it. Before first use, packaging materials destined for the packaging of dry foods can be evaluated by performing migration experiments with the simulant for dry foods, Tenax®. This simulant is commercially available as a powder that is more difficult to handle during the migration experiments. This paper reports the development of a Tenax film. The film can be applied to the cardboard surface to conduct the migration test. After the migration is completed, the film can be easily extracted to determine the concentration of the contaminants in the film. Finally, the performance of the Tenax film was compared with the conventional Tenax powder for the evaluation of 15 model migrants.

Development and validation of an ultra-high performance liquid chromatography-tandem mass spectrometry method to measure creatinine in human urine.

Despite decades of creatinine measurement in biological fluids using a large variety of analytical methods, an accurate determination of this compound remains challenging. Especially with the novel trend to assess biomarkers on large sample sets preserved in biobanks, a simple and fast method that could cope with both a high sample throughput and a low volume of sample is still of interest. In answer to these challenges, a fast and accurate ultra-high performance liquid chromatography-tandem mass spectrometry (UHPLC-MS/MS) method was developed to measure creatinine in small volumes of human urine. In this method, urine samples are simply diluted with a basic mobile phase and injected directly under positive electrospray ionization (ESI) conditions, without further purification steps. The combination of an important diluting factor (10(4) times) due to the use of a very sensitive triple quadrupole mass spectrometer (XEVO TQ) and the addition of creatinine-d3 as internal standard completely eliminates matrix effects coming from the urine. The method was validated in-house in 2012 according to the EMA guideline on bioanalytical method validation using Certified Reference samples from the German External Quality Assessment Scheme (G-Equas) proficiency test. All obtained results for accuracy and recovery are within the authorized tolerance ranges defined by G-Equas. The method is linear between 0 and 5 g/L, with LOD and LOQ of 5 × 10(-3) g/L and 10(-2) g/L, respectively. The repeatability (CV(r) = 1.03-2.07%) and intra-laboratory reproducibility (CV(RW) = 1.97-2.40%) satisfy the EMA 2012 guideline. The validated method was firstly applied to perform the German G-Equas proficiency test rounds 51 and 53, in 2013 and 2014, respectively. The obtained results were again all within the accepted tolerance ranges and very close to the reference values defined by the organizers of the proficiency test scheme, demonstrating an excellent accuracy of the developed method. The method was finally applied to measure the creatinine concentration in 210 urine samples, coming from 190 patients with a chronic kidney disease (CKD) and 20 healthy subjects. The obtained creatinine concentrations (ranging from 0.12 g/L up to 3.84 g/L) were compared, by means of a Passing Bablok regression, with the creatinine contents obtained for the same samples measured using a traditional compensated Jaffé method. The UHPLC-MS/MS method described in this paper can be used to normalize the concentration of biomarkers in urine for the extent of dilution.

Speciation study of aluminium in beverages by Competitive Ligand Exchange-Adsorptive Stripping Voltammetry.

Competitive Ligand Exchange-Adsorptive Stripping Voltammetry (CLE-AdSV) was used for determining the speciation of aluminium in commonly consumed beverages (water, tea, infusion, coffee, orange juice, tomato juice, beer and red wine). Aluminium determination involves the adsorption of Al-complexes with the ligand cupferron onto a hanging mercury drop electrode. All samples were studied at pH 6.5 with an accumulation step at -0.60 V (all potential values in the paper are given versus the Ag/AgCl, [KCl]=3 M reference electrode) during 60 s, and a final cupferron concentration of 4 × 10(-4)M. These conditions were used to establish (i) the concentration of electro-labile aluminium, (ii) the range of ligand concentrations and (iii) the conditional stability constants of beverage samples using titration procedures. The results based on Ruzic plots were compared to computer simulation with Visual MINTEQ. This comparison suggests that labile monomeric Al-forms and soluble organic complexes of low molecular weight can be quantified by the CLE-AdSV procedure. Overall the relative uncertainties on the determination of the electro-active Al fraction and the complexing parameters, i.e., concentration and conditional stability constant of natural ligands in the samples, are less than 15%. Thanks to these results, information on Al bioavailability in beverages was collected and discussed. This study also illustrates the value of computer simulations when complex, time-consuming voltammetric techniques are applied.

Evaluation of the migration of 15 photo-initiators from cardboard packaging into Tenax(®) using ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS).

Photo-initiators are widely used to cure ink on packaging materials used in food applications such as plastic films or cartonboards. In migration studies, food simulants are very often used to simulate food, like Tenax(®), which is the simulant for dry foodstuffs. In this paper a fast and reliable confirmation method for the determination of the following photo-initiators in Tenax(®) is described: benzophenone (BP), 4,4'-bis(diethylamino)benzophenone (DEAB), 2-chloro-9H-thioxanthen-9-one (CTX), 1-chloro-4-propoxy-9H-thioxanthen-9-one (CPTX), 2,4-diethyl-9H-thioxanthen-9-one (DETX), 2,2-dimethoxy-2-phenyl acetophenone (DMPA), 4-(dimethylamino)benzophenone (DMBP), 2-ethylanthraquinone (EA), ethyl-4-dimethylaminobenzoate (EDMAB), 1-hydroxylcyclohexyl phenyl ketone (HCPK), 2-hydroxy-4'-(2-hydroxyethoxy)-2-methylpropiophenone (HMMP), 2-isopropyl-9H-thioxanthen-9-one (ITX), 4-methylbenzophenone (MBP), Michler's ketone (MK), and 4-phenylbenzophenone (PBZ). After the migration study was completed, the simulant Tenax(®) was extracted using acetonitrile, followed by analysis on ultra-performance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS). Quantification was carried out using benzophenone-d10 (BP-d10) as internal standard. The presented method is validated in terms of matrix effect, specificity, linearity, recovery, precision and sensitivity, showing the method can detect all photo-initiators at very low concentrations (LOD < 0.125 µg g(-1) for all substances). Finally, the procedure was applied to real samples, proving the capabilities of the presented method.

Acrylonitrile exposure in the general population following a major train accident in Belgium: a human biomonitoring study.

BACKGROUND: On Saturday May 4, 2013, a train transporting chemicals derailed in the village of Wetteren (Belgium) and caused a leak of acrylonitrile (ACN). OBJECTIVES: To assess the human exposure to acrylonitrile in the local population with the highest suspected exposure. METHODS: Between May 18-25, 242 residents participated in the study. N-2-cyanoethylvaline (CEV), a biomarker that is highly specific for ACN exposure, was measured in the blood. To account for potential influence by smoking, cotinine was determined in the urine. Participants also filled in a short questionnaire. RESULTS: In the evacuated zone, 37.3% of the non-smokers and 40.0% of the smokers had CEV concentrations above the reference values of 10 and 200 pmol/g globin, respectively, at the time of the train accident. Spatial mapping of the CEV concentrations depending on the residential address showed a distribution pattern following the sewage system. DISCUSSION AND CONCLUSION: The train derailment resulted in a highly atypical sequence-of-events. In addition to exposure in the direct vicinity of the site of the train derailment, exposure also occurred via the sewage system, into which acrylonitrile had entered shortly after the accident.

Acrylonitrile exposure assessment in the emergency responders of a major train accident in Belgium: a human biomonitoring study.

BACKGROUND: On May 4, 2013, a train transporting chemicals derailed in Wetteren, Belgium. Several tanks loaded with acrylonitrile (ACN) exploded, resulting in a fire and a leakage of ACN. OBJECTIVES: To determine exposure to ACN and to assess discriminating factors for ACN exposure in the emergency responders involved in the on-site management of the train accident. METHODS: The study population consisted of 841 emergency responders. Between May 21 and June 28, they gave blood for the determination of N-2-cyanoethylvaline (CEV) hemoglobin adducts and urine for the measurement of cotinine. They also filled in a short questionnaire. RESULTS: 163 (26%) non-smokers and 55 (27%) smokers showed CEV concentrations above the reference values of 10 and 200 pmol/g globin, respectively. The 95th percentile in the non-smokers was 73 pmol/g globin and the maximum was 452 pmol/g globin. ACN exposure among the non-smokers was predicted by (1) the distance to the accident, (2) the duration of exposure, and (3) the occupational function. DISCUSSION AND CONCLUSION: Emergency responders involved in the on-site management of the train accident were clearly exposed to ACN from the accident. However, the extent of exposure remained relatively moderate with CEV concentrations staying within the ranges described in literature as background for a smoking population. Moreover, the exposure was less pronounced in the emergency responders as compared to that in the local population.

Exposure to domoic acid through shellfish consumption in Belgium.

A main known culprit causing amnesic shellfish poisoning in humans is domoic acid (DA). The toxin appearance in sea waters (by counting the toxin producing algae) and consequently in shellfish is closely monitored to prevent acute intoxications with gastrointestinal symptoms and neurological signs. However it is assumed that there might be some chronic problems with repetitive exposures to the toxin in animals. In humans this is greatly unknown and it is mostly assessed by relating reported toxin episodes and representative consumption data. Although in Belgium no alarming outbreaks have been reported in recent years, different concentrations of DA have been found in shellfish samples. In this study the human acute and chronic exposure to DA through shellfish consumption was evaluated by linking the data of DA concentrations in samples collected in the scope of the National Food control program in the period 2004-2009 and consumption data obtained from the National Belgian Food Consumption Survey including 3245 adults. The found level of toxin was highest in scallops while lowest in mussels. The mean usual long-term intake of molluscs such as scallops, mussels and oysters for the whole Belgian population was from 0.10 g/day for scallops to 1.21 g/day for mussels. With average portion size estimated to be 56-108 g/day depending on the shellfish source it was calculated that less than 1% of the population would be at risk of acute intoxication. Using a medium bound approach, 5-6% of the population shows chronic exposure exceeding the tolerable daily intake of 0.075 µg/kg bw per day with scallops being the most probable toxin vector when using lower (68.5%) and medium (45.6%) bound concentrations.

Migration of 18 trace elements from ceramic food contact material: influence of pigment, pH, nature of acid and temperature.

The effect of pH, nature of acid and temperature on trace element migration from ceramic ware treated with 18 commercially available glazes was studied. Besides of the well-studied lead and cadmium, migration of other toxic and non toxic elements such as aluminum, boron, barium, cobalt, chrome, copper, iron, lithium, magnesium, manganese, nickel, antimony, tin, strontium, titanium, vanadium, zinc and zirconium was investigated in order to evaluate their potential health hazards. Trace element concentrations were determined with Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES). This study suggests that there is indeed a health risk concerning the possible migration of other elements than lead and cadmium. At low pH (2

Effect of household and industrial processing on the levels of pesticide residues and degradation products in melons.

Two varieties of melons (Cucumis melo) were treated with two fungicides (carbendazim and maneb) and four insecticides (acetamiprid, cyromazin, imazalil and thiamethoxam) to quantify the effect of household processing on the pesticide residues. To ensure sufficiently high levels of residues in flesh and peel, the most concentrated formulations were applied observing good agricultural practice. The peeling step decreased the concentration of pesticide residues for maneb, imazalil and acetamiprid by more than 90%. Cyromazin, carbendazim and thiamethoxam were reduced by approximately 50%. The reduction of the pesticides could not be fully explained by the systemic character of the pesticides. However, the agricultural practices (time of application), solubility and mode of action (systemic versus contact pesticide) of the pesticides could be used to explain the difference in processing factors for the studied pesticides. Degradation products (melamine and ethylenethiourea) were also investigated in this study, but were not detected.

Comparison of four analytical techniques based on atomic spectrometry for the determination of total tin in canned foodstuffs.

Different techniques for the determination of total tin in beverages and canned foods by atomic spectrometry were compared. The performance characteristics of inductively coupled plasma-mass spectrometry (ICP-MS), hydride generation-inductively coupled plasma-atomic emission spectrometry (HG-ICP-AES), electrothermal atomisation-atomic absorption spectrometry (ETA-AAS) and inductively coupled plasma-atomic emission spectrometry (ICP-AES) were determined in terms of linearity, precision, recovery, limit of detection, decision limit (CCα) and detection capability (CCß) (Decision 2002/657/EC). Calibration ranges were covered from ng l⁻¹ to mg l⁻¹ level. Limits of detection that ranged from 0.01, 0.05, 2.0 to 200 µg l⁻¹ were reached for ICP-MS; HG-ICP-AES; ETA-AAS and ICP-AES, respectively. Precision, calculated according to ISO 5725-2 for repeatability and within-laboratory reproducibility and expressed as relative standard deviation (RSD), ranged from 1.6% to 4.9%; and recovery, based on Decision 2002/657/EC, was found to be between 95% and 110%. Procedures for the mineralisation or extraction of total tin were compared. Wet digestion, sequentially, with nitric acid and hydrogen peroxide provided the best results. The influence of possible interferences present in canned food and beverage was studied, but no interference in the determination of tin was observed. Since maximum levels for tin established by European Union legislation vary from 50 mg kg⁻¹ in canned baby foods and infant foods up to 200 mg kg⁻¹ in canned food, ICP-AES was chosen as the preferred technique for routine analysis thanks to its good precision, reliability and ease of use. The accuracy of this routine method was confirmed by participation in six proficiency test schemes with z-scores ranging from -1.9 to 0.6. Several canned foodstuffs and beverage samples from a local market were analysed with this technique.

Tea brewed in traditional metallic teapots as a significant source of lead, nickel and other chemical elements.

An environmental inquiry conducted by the Brussels Inter-communal Laboratory of Chemistry and Bacteriology (BILCB) has revealed that in 2000a traditional metallic teapot caused in Brussels lead intoxication among a family of Morocco origin. Following this case study of lead poisoning and subsequent preliminary results carried out by the BILCB, which confirmed the dangerousness of this kind of item, samples of traditional metallic teapots were collected from North African groceries in Brussels by the Institute of Public Health (IPH) in collaboration with the BILCB and the Federal Agency for the Safety of the Food Chain (FASFC). Aluminium, copper, iron, nickel, lead and zinc were analysed to identify metals with a potential to migrate into tea solutions. Simulants (natural tea, tea acidified with citric acid and citric acid) were brewed in those teapots in order to identify the leaching potential of migration at boiling point temperature for different contact periods. Multi-elementary analysis was carried out by inductively coupled plasma-atomic emission spectrometry (ICP-AES). It was concluded that the concentrations of those leached metals depend on the nature of the migration liquids, the type of teapots and the contact periods. Most teapots showed a high level of toxic metals in leachates for lead and to a less extent for nickel, which can contribute significantly to the risk of serious poisoning. A comparison of the results with the toxicological reference values was done. The teapots were withdrawn from the market by the FASFC.

Estimate of intake of sulfites in the Belgian adult population.

An exposure assessment was performed to estimate the usual daily intake of sulfites in the Belgian adult population. Food consumption data were retrieved from the national food consumption survey. In a first step, individual food consumption data were multiplied with the maximum permitted use levels for sulfites, expressed as sulphur dioxide, per food group (Tier 2). In a second step, on the basis of a literature review of the occurrence of sulfites in different foods, the results of the Tier 2 exposure assessment and available occurrence data from the control programme of the competent authority, a refined list of foods was drafted for the quantification of sulphite. Quantification of sulphite was performed by a high-performance ion chromatography method with eluent conductivity detector in beers and potato products. Individual food consumption data were then multiplied with the actual average concentrations of sulfite per food group, or the maximum permitted levels in case actual levels were not available (partial Tier 3). Usual intakes were calculated using the Nusser method. The mean intake of sulfites was 0.34 mg kg(-1) bw day(-1) (Tier 2), corresponding to 49% of the acceptable daily intake (ADI) and 0.19 mg kg(-1) bw day(-1), corresponding to 27% of the ADI (partial Tier 3). The food group contributing most to the intake of sulfites was wines. The results showed that the intake of sulfites is likely to be below the ADI in Belgium. However, there are indications that high consumers of wine have an intake around the ADI.

Analysis of benzophenone and 4-methylbenzophenone in breakfast cereals using ultrasonic extraction in combination with gas chromatography-tandem mass spectrometry (GC-MS(n)).

Benzophenone (BP) and 4-methylbenzophenone (4MBP) are photo-initiators that are generally used to cure ink on carton boards. In this contribution, a fast and reliable method for the determination of BP and 4MBP in breakfast cereals is described. The sample was extracted ultrasonically using a mixture of dichloromethane and acetonitrile (1:1), followed by a clean-up of the extract using solid phase extraction with a silica cartridge. Finally, the extract was analysed by GC-MS(n). Benzophenone-d(10) was used as internal standard. The presented method is validated in terms of linearity, recovery, repeatability and intra-laboratory reproducibility, specificity, limit of detection and limit of quantification. In conclusion, this method is able to detect both BP and 4MBP at very low concentrations (LOD=2microg kg(-1)) in breakfast cereals.

Dietary intake of PCDD/Fs and dioxin-like PCBs of the Belgian population.

The World Health Organization recommends assessing human exposure to contaminants on a regular basis. In order to assess the current dietary exposure of the Belgian adult population to PCDD/Fs and dioxin-like PCBs and to update exposure estimates of 2000-2001, a total diet study was designed. The mean dietary intake of PCDD/Fs and dioxin-like PCBs in the Belgian adult population in 2008 was estimated to be 0.72pgTEQkgbw(-1)d(-1) (middle bound concentrations, TEF of 1998) based on occurrence data of 2008 and national food consumption data of 2004. This value is clearly below the Tolerable Weekly Intake (TWI) of 14pgTEQkgbw(-1)week(-1) set by the Scientific Committee on Food of the European Commission and below the provisional tolerable monthly intake of 70pgTEQkgbw(-1)month(-1) set by the Joint FAO/WHO Expert Committee on Food Additives. Considering the cumulative distribution, the intake was less than 1pgTEQkgbw(-1)d(-1) for more than 80% of the population, and less than 2pgTEQkgbw(-1)d(-1) for the entire population. When using the 2005 TEF instead of the 1998 TEF, the mean dietary intake in the Belgian adult population was estimated to be 0.61pgTEQkgbw(-1)d(-1).

Optimization and validation of a liquid chromatography tandem mass spectrometry (LC/MSn) method for analysis of corticosteroids in bovine liver: evaluation of Keyhole Limpet beta-glucuronidase/sulfatase enzyme extract.

A liquid chromatography tandem mass spectrometry (LC/MS(n)) method for the determination of 12 corticosteroids in bovine liver has been optimized and validated in accordance with the European Commission Decision 2002/657/EC. A bovine liver sample was deconjugated with beta-glucuronidase/sulfatase enzyme, extracted with diethyl ether and further cleaned up with Solid Phase Extraction (SPE) before analysis with LC/MS(n). Two different enzyme extracts (originating from Helix Pomatia and Keyhole Limpet) and three SPE elution solvents (ethyl acetate, acetonitrile and methanol) were compared during the optimization. Helix Pomatia is generally known as the enzyme most being used for enzymatic hydrolysis purposes. Nevertheless, when detecting corticosteroids in the low microg kg(-1) concentration range, the Helix Pomatia extract may lead to interferences in the final LC/MS(n) chromatogram. When using the Keyhole Limpet enzyme extract, no interferences were observed and therefore, this extract was the best choice for enzymatic hydrolysis tested in this case. Ethyl acetate was used as elution solvent during the validation procedure since SPE elution with acetonitrile resulted in higher chromatographic backgrounds, while elution with methanol showed less reproducible results. Validation of the optimized method was carried out for 10 of the 12 corticosteroids, giving mean recoveries between 91 and 109%, and repeatability and reproducibility coefficients of respectively maximum 13.7 and 18.0%. The working ranges for the linear calibration curves were 5-20 microg kg(-1) for prednisolone, methylprednisolone and prednisone and 0.5-4 microg kg(-1) for the other compounds (coefficients of determination R(2)> or =0.97). Specificity, decision limit (CCalpha) and detection capability (CCbeta) were for all compounds within the EC specified limits.

Estimate of intake of benzoic acid in the Belgian adult population.

An exposure assessment was performed to estimate average daily benzoic acid intake for Belgian adults. Food consumption data were retrieved from the national food-consumption survey. As a first step, individual food-consumption data were multiplied with the maximum permitted use levels for benzoic acid per food group (Tier 2). As a second step, a label survey to identify the foods where benzoic acid is effectively used as an additive and a literature review of the possible occurrence of benzoic acid as a natural substance were performed. With this information, a refined list of foods was drafted for the quantification of benzoic acid, which was performed by a high-performance liquid chromatography (HPLC) method, optimized and validated for this purpose. Individual food-consumption data were then multiplied with the actual average concentrations of benzoic acid per food group (Tier 3). Usual intakes were calculated using the Nusser method. The mean benzoic acid intake was 1.58 mg kg(-1) body weight day(-1) (Tier 2) and 1.25 mg kg(-1) body weight day(-1) (Tier 3). In Tier 2, men exceeded the acceptable daily intake (ADI) of 5 mg kg(-1) body weight day(-1) at the 99th percentile. The greatest contributors to the benzoic acid intake were soft drinks. Benzoic acid as a natural substance represents only a small percentage of the total intake. The results show that actual benzoic acid intake is very likely to be below the ADI. However, there is a need to collect national food-consumption data for children as they might be more vulnerable to an excessive intake.

Determination of bixin and norbixin in meat using liquid chromatography and photodiode array detection.

The development of an analytical method that enables routine analysis of annatto dye, specifically bixin and norbixin, in meat tissue is described. Liquid-solid extraction was carried out using acetonitrile. Analysis was by HPLC with photodiode array detection using two fixed wavelengths (458 and 486 nm). The possibilities of ion trap mass spectrometry (MS) were also assessed. Method performance characteristics, according to Commission Decision 2002/657/EC, were determined, with recoveries between 99 and 102% and calibration curves being linear in the 0.5-10 mg kg(-1) range. The limit of quantification was 0.5 mg kg(-1).

Calculation of the decision limit (CCalpha) and the detection capability (CCbeta) for banned substances: the imperfect marriage between the quantitative and the qualitative criteria.

Initially in the Decision 2002/657/EC the criteria for the calculation of the decision limit (CCalpha) and the detection capability (CCbeta) have been estimated as purely quantitative (alpha-error is 1% and beta-error is 5%). In 2004, the European Commission has issued a document to provide guidance for the interpretation of the 2002/657/EC. In this document it is mentioned that also qualitative criteria should be fulfilled. Therefore, the calculated CCalpha and CCbeta must be verified by using fortified samples. The method should be able to detect/identify the target component in 50% of the cases at CCalpha and in 95% of the cases at CCbeta. Analytical methods for the analysis of nitroimidazoles, nitrofurans and corticosteroids with LC-MS/MS have been validated by fortifying blank samples below and above the MRPL. CCalpha and CCbeta were calculated using the ISO 11843 approach. In addition, the frequency of methodical compliance for the qualitative criteria was determined at each concentration level. It was observed that at the calculated CCalpha and CCbeta levels the qualitative criteria were not fulfilled. It was concluded that the detection capability of the analytical method should be calculated by using decreasing fortification levels at and below the MRPL. A protocol validating methods for banned substances by limiting the number of samples is presented and the qualitative criteria for the assessment of CCalpha and CCbeta were verified based on the same set of data without the need of performing additional validation experiments.