RESUMO
Mesothelial cells with reactive hyperplasia are difficult to distinguish from malignant mesothelioma cells based on cell morphology. This study aimed to identify and validate potential biomarkers that distinguish mesothelial cells from mesothelioma cells through machine learning combined with immunohistochemistry. It integrated the gene expression matrix from three Gene Expression Omnibus data sets (GSE2549, GSE12345, and GSE51024) to analyze the differently expressed genes between normal and mesothelioma tissues. Then, three machine learning algorithms, least absolute shrinkage and selection operator, support vector machine recursive feature elimination, and random forest were used to screen and obtain four shared candidate markers, including ACADL, EMP2, GPD1L, and HMMR. The receiver operating characteristic curve analysis showed that the area under the curve for distinguishing normal mesothelial cells from mesothelioma was 0.976, 0.943, 0.962, and 0.956, respectively. The expression and diagnostic performance of these candidate genes were validated in two additional independent data sets (GSE42977 and GSE112154), indicating that the performances of ACADL, GPD1L, and HMMR were consistent between the training and validation data sets. Finally, the optimal candidate marker ACADL was verified by immunohistochemistry assay. Acyl-CoA dehydrogenase long chain (ACADL) was stained strongly in mesothelial cells, especially for reactive hyperplasic mesothelial cells, but was negative in malignant mesothelioma cells. Therefore, ACADL has the potential to be used as a specific marker of reactive hyperplasic mesothelial cells in the differential diagnosis of mesothelioma.
Assuntos
Biomarcadores Tumorais , Biologia Computacional , Aprendizado de Máquina , Mesotelioma Maligno , Mesotelioma , Humanos , Biomarcadores Tumorais/genética , Biomarcadores Tumorais/metabolismo , Mesotelioma/genética , Mesotelioma/patologia , Mesotelioma/diagnóstico , Mesotelioma/metabolismo , Biologia Computacional/métodos , Mesotelioma Maligno/genética , Mesotelioma Maligno/patologia , Mesotelioma Maligno/metabolismo , Mesotelioma Maligno/diagnóstico , Neoplasias Pulmonares/genética , Neoplasias Pulmonares/patologia , Neoplasias Pulmonares/metabolismo , Neoplasias Pulmonares/diagnóstico , Epitélio/metabolismo , Epitélio/patologiaRESUMO
The performance of tin halide perovskite solar cells (PSCs) has been severely limited by the rapid crystallization of tin perovskites, which usually leads to an undesirable film quality. In this work, we tackle this issue by regulating the nucleation and crystal growth of tin perovskite films using a small Lewis base additive, urea. The urea-SnI2 interaction facilitates the formation of larger and more uniform clusters, thus accelerating the nucleation process. Additionally, the crystal growth process is extended, resulting in a high-quality tin perovskite film with compact morphology, increased crystallinity, and reduced defects. Consequently, the efficiency of tin PSCs is significantly increased from 10.42% to 14.22%. This work highlights the importance of manipulating the nucleation and crystal growth of tin perovskites to realize efficient tin PSCs.
RESUMO
Overexpression of receptor tyrosine kinases (RTKs) or binding to ligands can lead to the formation of specific unliganded and liganded RTK dimers, and these two RTK dimers are potential targets for preventing tumor metastasis. Traditional RTK dimer inhibitor analysis was mostly based on end point assays, which required cumbersome cell handling and behavior monitoring. There are still challenges in developing intuitive process-based analytical methods to study RTK dimer inhibitors, especially those used to visually distinguish between unliganded and liganded RTK dimer inhibitors. Herein, taking the mesenchymal-epithelial transition factor (MET) receptor, an intuitive method for evaluating MET inhibitors has been developed based on atomic force microscopy (AFM) lifetime analysis. The time interval between the start of the force and the bond break point was regarded as the bond lifetime, which could reflect the stability of the MET dimer. The results showed that there was a significant difference in the lifetime (τ) of unliganded MET dimers (τ1 = 207.87 ± 4.69 ms) and liganded MET dimers (τ2 = 330.58 ± 15.60 ms) induced by the hepatocyte growth factor, and aptamer SL1 could decrease τ1 and τ2, suggesting that SL1 could inhibit both unliganded and liganded MET dimers. However, heparin only decreased τ2, suggesting that it could inhibit only the liganded MET dimer. AFM-based lifetime analysis methods could monitor RTK dimer status rather than provide overall average results, allowing for intuitive process-based analysis and evaluation of RTK dimers and related inhibitors at the single-molecule level. This study provides a novel complementary strategy for simple and intuitive RTK inhibitor research.
Assuntos
Microscopia de Força Atômica , Inibidores de Proteínas Quinases , Proteínas Proto-Oncogênicas c-met , Inibidores de Proteínas Quinases/farmacologia , Inibidores de Proteínas Quinases/química , Humanos , Proteínas Proto-Oncogênicas c-met/antagonistas & inibidores , Proteínas Proto-Oncogênicas c-met/metabolismo , Multimerização Proteica/efeitos dos fármacos , Ligantes , Fator de Crescimento de Hepatócito/metabolismo , Aptâmeros de Nucleotídeos/química , Aptâmeros de Nucleotídeos/metabolismoRESUMO
P2-Na2/3Ni1/3Mn2/3O2 cathode materials have garnered significant attention due to their high cationic and anionic redox capacity under high voltage. However, the challenge of structural instability caused by lattice oxygen evolution and P2-O2 phase transition during deep charging persists. A breakthrough is achieved through a simple one-step synthesis of Cr, Mg co-doped P2-NaNMCM, resulting in a bi-functional improvement effect. P2-NaNMCM-0.01 exhibits an impressive capacity retention rate of 82% after 100 cycles at 1 C. In situ X-ray diffraction analysis shows that the "pillar effect" of Mg mitigates the weakening of the electrostatic shielding and effectively suppresses the phase transition of P2-O2 during the charging and discharging process. This successfully averts serious volume expansion linked to the phase transition, as well as enhances the Na+ migration. Simultaneously, in situ Raman spectroscopy and ex situ X-ray photoelectron spectroscopy tests demonstrate that the strong oxygen affinity of Cr forms a robust TMâO bond, effectively restraining lattice oxygen evolution during deep charging. This study pioneers a novel approach to designing and optimizing layered oxide cathode materials for sodium-ion batteries, promising high operating voltage and energy density.
RESUMO
The dispersion stability of nano-lubricating additives is crucial for the shelf life of lubricant and its practical applications. Nitrogen-sulfur co-doped carbon dots (N,S@CDs) via a one-step hydrothermal method with nitropyrene and thiourea as raw materials are hereby presented. The N and S elements are selectively distributed throughout the entire carbon skeleton with a doping amount of 22.6 at%. The as-synthesized N,S@CDs exhibit excellent dispersion stability in PEG200 and maintain stability for over one year. The experiment results indicate that N,S@CDs significantly improve the anti-wear and friction reduction properties of PEG200, while the friction coefficient is reduced from 0.25 to 0.09 with 1.5 wt% N,S@CDs addition, and the wear volume, depth, and width are reduced by 68%, 52%, and 57%, respectively. The good lubrication performance is attributed to N,S@CDs excellent dispersion stability, enhanced filling and polishing effects, and complex tribochemical reactions caused by heteroatom doping to form a stable protective film on the worn surface. Furthermore, the as-prepared N,S@CDs exhibit intrinsic fluorescence intensity in PEG200 with the photoluminescence quantum yield (PLQY) of 12.5% and remain fluorescent stable during the long-term friction process, therefore the N,S@CDs have a potential application prospect in non-destructive detection of oil leakage via fluorescence labeling method.
RESUMO
The increasing demand for graphite and the higher lithium content than environment abundance make the recycling of anode in spent lithium-ion batteries (LIBs) also become an inevitable trend. This work proposes a simple pathway to convert the retired graphite to high-performance expanded graphite (EG) under mild conditions. After the oxidation and intercalation by FeCl3 for the retired graphite, H2O2 molecules are more likely to penetrate into the extended layers. And the gas phase diffusion caused by the produced O2 from the redox reaction between FeCl3 and H2O2 further promotes lattice expansion of interlayers (0.535 nm), which is beneficial to the stripping of graphene oxide (GO) with fewer layers. The EG exhibits excellent electrochemical performances in both LIBs and sodium-ion batteries (SIBs). It delivers 331.5 mAh g-1 at 3C (1C = 372 mA g-1) in LIBs, while it achieves 176.8 mAh g-1 at 3C (1C = 120 mA g-1) in SIBs. Then the capacity retains 753.6 (LIBs) and 201.6 (SIBs) mAh g-1 after a long-term cycling of 500 times at 1C, respectively. The full cells with the EG electrodes after prelithium/presodiation also show excellent cycle stability. Thus, this work offers another referable strategy for the recycling of waste graphite in spent LIBs.
RESUMO
Traditional laser-assisted method (top-down synthesis strategy) is applied in the preparation of carbon dots (CDs) by cutting larger carbon materials, which requires harsh conditions, and the size distribution of the CDs is seldom monodisperse. In this work, heteroatom-doped CDs, represented by N,S co-doped CDs (N,S-CDs), can be prepared successfully by pulsed laser irradiation of heterocyclic aromatic hydrocarbons-based small molecule compound solution. The friction coefficient (COF) of base oil PAO decreases from 0.650 to 0.093, and the wear volume reduces by 92.0% accompanied by 1 wt.% N,S-CDs addition, while the load-bearing capacity is improved from 100 to 950 N. The excellent lubrication performance is mainly attributed to the formation of a robust tribofilm via a tribochemical reaction between N,S-CDs and friction pairs, and the N,S-CDs can play a mending effect and polishing effect for worn surfaces. Furthermore, the lubricant containing heteroatom doped CDs are capable of being prepared in situ via pulsed laser irradiation of heterocyclic aromatic hydrocarbons in base oil, which can avoid the redispersed problem of nano-additive in base oil to maintain long-term dispersion, with COF of 0.103 and low wear volume ≈1.99 × 105 µm3 (76.9% reduction) even after standing for 9 months.
RESUMO
2D-3D tin-based perovskites are considered as promising candidates for achieving efficient lead-free perovskite solar cells (PSCs). However, the existence of multiple low-dimensional phases formed during the film preparation hinders the efficient transport of charge carriers. In addition, the non-homogeneous distribution of low-dimensional phases leads to lattice distortion and increases the defect density, which are undesirable for the stability of tin-based PSCs. Here, mixed spacer cations [diethylamine (DEA+) and phenethylamine (PEA+)] are introduced into tin perovskite films to modulate the distribution of the 2D phases. It is found that compared to the film with only PEA+, the combination of DEA+ and PEA+ favors the formation of homogeneous low-dimensional perovskite phases with three octahedral monolayers (n = 3), especially near the bottom interface between perovskite and hole transport layer. The homogenization of 2D phases help improve the film quality with reduced lattice distortion and released strain. With these merits, the tin PSC shows significantly improved stability with 94% of its initial efficiency retained after storing in a nitrogen atmosphere for over 4600 h, and over 80% efficiency maintained after continuous illumination for 400 h.
RESUMO
The vortex electromagnetic wave has shown great prospects of radar applications, due to the orbital angular momentum (OAM) degree of freedom. However, the radiation energy convergence of the OAM beam remains a hard problem to be solved for radar target imaging in realistic scenario. In this paper, an OAM beam generation method is developed exploiting the OAM and waveform degrees of freedom simultaneously, which can collimate the beams with different OAM modes. Furthermore, the echo demodulation and the imaging methods are proposed to reconstruct the target profiles in the range and azimuth domain. Simulation and experimental results both validate that the OAM-based radar imaging can achieve azimuthal super-resolution beyond the diffraction limit of the array aperture. This work can advance the system design of vortex electromagnetic wave radar and its real-world applications.
RESUMO
The practical application of Zn-air batteries require exploring cost-effective and durable bifunctional electrocatalysts. However, the simultaneous preparation of catalysts with bifunctional activities for oxygen reduction reaction (ORR) and oxygen precipitation reaction (OER) remains challenging. Herein, we synthesized a novel hybrid catalyst (FePc/NiCo/CNT), which couples NiCo alloy with FePc through electrostatic interaction. The interaction between FePc and NiCo alloy can enhance the intrinsic catalytic activity of the active site Fe-N4 and prevent the electrolyte corrosion of the metal alloy, ultimately improving the stability of the catalyst by the microenvironment-tailoring strategy. The resultant FePc/NiCo/CNT catalyst exhibits outstanding oxygen reduction reaction (ORR) activity with a half-wave potential of 0.88 V, which is attributed to the abundant Fe-Nx active sites. Furthermore, the electron interactions between NiCo/CNT and FePc accelerate electron transfer and enhance the activation of oxygen intermediates, consequently boosting the OER activity with an overpotential of 260 mV at 10 mA cm-2. The Zn-air batteries assembled with FePc/NiCo/CNT show a high power density of 175.1 mW cm-2 and excellent cycling stability for up to 430 h at 20 mA cm-2. The preparation of oxygen electrode catalysts for renewable clean energy devices can be made more convenient with this directly engineered strategy for ORR and OER active centers.
RESUMO
A simple and sensitive LC-tandem mass spectrometry method was established and validated for the determination of schaftoside in rat plasma. After prepared by protein precipitation with acetonitrile, schaftoside and internal standard were separated on a Waters HSS T3 column using acetonitrile containing 0.1% formic acid and 0.1% formic acid in water as the mobile phase by gradient elution. The method showed excellent linearity over the range of 0.5-500 ng/mL with acceptable intra- and inter-day precision, accuracy, matrix effect, and recovery. The stability assay indicated that schaftoside was stable during the sample acquisition, preparation, and storage. The method was applied to a pharmacokinetic study of schaftoside in rats. The result suggested that after intravenous administration at a dose of 1 mg/kg, schaftoside was quickly eliminated from the plasma with an elimination half-life of 0.58 h. After oral administration at doses of 5, 10, and 20 mg/kg, schaftoside was quickly absorbed into the plasma and reached the peak concentration (Cmax) of 45.1-104.99 ng/mL at 0.67-1.17 h. The increase of exposure (area under the curve) was linear with the increase of dose. The oral bioavailability was 0.42%-0.71% in the range of 5-20 mg/kg.
Assuntos
Disponibilidade Biológica , Ratos Sprague-Dawley , Espectrometria de Massas em Tandem , Animais , Ratos , Masculino , Administração Oral , Espectrometria de Massas em Tandem/métodos , Reprodutibilidade dos Testes , Modelos Lineares , Cromatografia Líquida/métodos , Limite de Detecção , Sensibilidade e Especificidade , Glicosídeos/farmacocinética , Glicosídeos/sangue , Glicosídeos/química , Estabilidade de MedicamentosRESUMO
All-inorganic cesium lead triiodide perovskites (CsPbI3) have attracted increasing attention due to their good thermal stability, remarkable optoelectronic properties, and adaptability in tandem solar cells. However, N2-filled glovebox is generally required to strictly control the humidity during film fabrication due to the moisture-induced black-to-yellow phase transition, which remains a great hinderance for further commercialization. Herein, we report an effective approach via incorporating multifunctional ethacridine lactate (EAL) to mitigate moisture invasion and enable the fabrication of efficient inverted (p-i-n) CsPbI3 perovskite solar cells (PSCs) under ambient condition. It is revealed that the lactate anions accelerate the crystallization of CsPbI3, shortening the exposure time to moisture during film fabrication. Meanwhile, the conjugated backbone and multiple functional groups in the ethacridine cations can interact with I- and Pb2+ to reduce the undesired defects, stabilize the perovskite structure and facilitate the charge transport in the film. Moreover, EAL incorporation also leads to better energy alignment, thus favoring charge extraction at both upper and bottom interfaces. Consequently, the device efficiency and stability are enormously enhanced, with the champion efficiency reaching 21.08 %. This even surpasses the highest value reported for the devices fabricated in glovebox, representing a record efficiency of inverted all-inorganic PSCs.
RESUMO
Inverted NiOx-based perovskite solar cells (PSCs) exhibit considerable potential because of their low-temperature processing and outstanding excellent stability, while is challenged by the carriers transfer at buried interface owing to the inherent low carrier mobility and abundant surface defects that directly deteriorates the overall device fill factor. Present work demonstrates a chemical linker with the capability of simultaneously grasping NiOx and perovskite crystals by forming a Ni-S-Pb bridge at buried interface to significantly boost the carriers transfer, based on a rationally selected molecule of 1,3-dimethyl-benzoimidazol-2-thione (NCS). The constructed buried interface not only reduces the pinholes and needle-like residual PbI2 at the buried interface, but also deepens the work function and valence band maximum positions of NiOx, resulting in a smaller VBM offset between NiOx and perovskite film. Consequently, the modulated PSCs achieved a high fill factor up to 86.24 %, which is as far as we know the highest value in records of NiOx-based inverted PSCs. The NCS custom-tailored PSCs and minimodules (active area of 18â cm2) exhibited a champion efficiency of 25.05 % and 21.16 %, respectively. The unencapsulated devices remains over 90 % of their initial efficiency at maximum power point under continuous illumination for 1700â hours.
RESUMO
Perovskite light-emitting diodes (PeLEDs) that can be air-processed promises the development of displaying optoelectronic device, while is challenged by technical difficulty on both the active layer and hole transport layer (HTL) caused by the unavoidable humidity interference. Here, we propose and validate that, planting the polymer brush with tailored functional groups in inorganic HTL, provides unique bilateral embedded anchoring that is capable of simultaneously addressing the n phases crystallization rates in the active layer as well as the deteriorated particulate surface defects in HTL. Exemplified by zwitterionic polyethyleneimine-sulfonate (PEIS) in present study, its implanting in NiOx HTL offers abundant nuclei sites of amino and sulfonate groups that balance the growth rate of different n phases in quasi-2D perovskite films. Moreover, the PEIS effectively nailed the interfacial contact between perovskite and NiOx, and reduced the particulate surface defects in HTL, leading to the enhanced PLQY and stability of large-area blue perovskite film in ambient air. By virtue of these merits, present work achieves the first demonstration of the air-processed blue PeLEDs in large emitting area of 1.0 cm2 with peak external quantum efficiency (EQE) of 2.09 %, which is comparable to the similar pure-bromide blue PeLEDs fabricated in glovebox.
RESUMO
Rational regulation of nanozyme activity can promote biochemical sensing by expanding sensing strategies and improving sensing performance, but the design of effective regulatory strategies remains a challenge. Herein, a rapid DNA-encoded strategy was developed for the efficient regulation of Pt nanozyme activity. Interestingly, we found that the catalytic activity of Pt nanozymes was sequence-dependent, and its peroxidase activity was significantly enhanced only in the presence of T-rich sequences. Thus, different DNA sequences realized bidirectional regulation of Pt nanozyme peroxidase activity. Furthermore, the DNA-encoded strategy can effectively enhance the stability of Pt nanozymes at high temperatures, freezing, and long-term storage. Meanwhile, a series of studies demonstrated that the presence of DNA influenced the reduction degree of H2PtCl6 precursors, which in turn affected the peroxidase activity of Pt nanozymes. As a proof of application, the sensor array based on the Pt nanozyme system showed superior performance in the accurate discrimination of antioxidants. This study obtained the regulation rules of DNA on Pt nanozymes, which provided theoretical guidance for the development of new sensing platforms and new ideas for the regulation of other nanozyme activities.
Assuntos
Antioxidantes , DNA , Peroxidases , Peroxidase , Peróxido de Hidrogênio/análiseRESUMO
It is facing a tremendous challenge to develop the desirable hybrids for photocatalytic H2 generation by integrating the advantages of a single semiconductor. Herein, an all-sulfide ZnIn2 S4 /CdS/PdS heterojunction is constructed for the first time, where CdS and PdS nanoparticles anchor in the spaces of ZnIn2 S4 micro-flowers due to the confinement effects. The morphology engineering can guarantee rapid charge transfer owing to the short carrier migration distances and the luxuriant reactive sites provided by ZnIn2 S4 . The S-scheme mechanism between ZnIn2 S4 and CdS assisted by PdS cocatalyst is testified by in situ irradiated X-ray photoelectron spectroscopy and electron paramagnetic resonance (EPR), where the electrons and holes move in reverse driven by work function difference and built-in electric field at the interfaces. The optimal ZnIn2 S4 /CdS/PdS performs a glaring photocatalytic activity of 191.9 µmol h-1 (10 mg of catalyst), and the largest AQE (apparent quantum efficiency) can reach a high value of 26.26%. This work may afford progressive tactics to design multifunctional photocatalysts.
RESUMO
Atmospheric nitrogen (N) deposition is composed of both inorganic nitrogen (IN) and organic nitrogen (ON), and these sources of N may exhibit different impacts on ecosystems. However, our understanding of the impacts of N deposition is largely based on experimental gradients of INs or more rarely ONs. Thus, the effects of N deposition on ecosystem productivity and biodiversity may be biased. We explored the differential impacts of N addition with different IN:ON ratios (0:10, 3:7, 5:5, 7:3, and 10:0) on aboveground net primary productivity (ANPP) of plant community and plant diversity in a typical temperate grassland with a long-term N addition experiment. Soil pH, litter biomass, soil IN concentration, and light penetration were measured to examine the potential mechanisms underlying species loss with N addition. Our results showed that N addition significantly increased plant community ANPP by 68.33%-105.50% and reduced species richness by 16.20%-37.99%. The IN:ON ratios showed no significant effects on plant community ANPP. However, IN-induced species richness loss was about 2.34 times of ON-induced richness loss. Soil pH was positively related to species richness, and they exhibited very similar response patterns to IN:ON ratios. It implies that soil acidification accounts for the different magnitudes of species loss with IN and ON additions. Overall, our study suggests that it might be reasonable to evaluate the effects of N deposition on plant community ANPP with either IN or ON addition. However, the evaluation of N deposition on biodiversity might be overestimated if only IN is added or underestimated if only ON is added.
Assuntos
Ecossistema , Pradaria , Nitrogênio , Biodiversidade , Biomassa , Plantas , SoloRESUMO
Rhenium diselenide (ReSe2) has shown great application potential in the field of optical devices because of its excellent optoelectronic properties. In this study, we systematically investigated the nonlinear optical absorption properties of mono- and bi-layer ReSe2 and the ultrafast carrier dynamics process in the ultraviolet to near-infrared spectral range as the essential foundational groundwork for harnessing the potential of ultrathin ReSe2-based optoelectronic devices. We found that ReSe2 has excellent nonlinear absorption performance and a low saturation absorption intensity that is better than that of many semiconductor materials. Meanwhile, pump-probe and transient absorption technology revealed the underlying dynamic mechanisms, including bandgap renormalization and Auger recombination. This study can broaden the horizons of material science and propel the development of different applications of ReSe2.
RESUMO
Electrochemical exfoliation starting with graphite powder as the raw material for graphene production shows superiority in cost effectiveness over the popular bulk graphite. However, the crucial conductive network inside the graphite powder electrode along with its formation and influence mechanisms remains blank. Here, an adjustable-pressure graphite powder electrode with a sandwich structure was designed for this. Appropriate encapsulation pressure is necessary and conducive to constructing a continuous and stable conductive network, but overloaded encapsulation pressure is detrimental to the exfoliation and graphene quality. With an initial encapsulation pressure (IEP) of 4 kPa, the graphite powders expand rapidly to a final stable expansion pressure of 49 kPa with a final graphene yield of 46.3%, where 84% of the graphene sheets are less than 4 layers with ID/IG values between 0.22 and 1.24. Increasing the IEP to 52 kPa, the expansion pressure increases to 73 kPa, but the graphene yield decreases to 39.3% with a worse graphene quality including higher layers and ID/IG values of 1.68-2.13. In addition, small-size graphite powders are not suitable for the electrochemical exfoliation. With the particle size decreasing from 50 to 325 mesh, the graphene yield decreases almost linearly from 46.3% to 5.5%. Conductive network and electrolyte migration synergize and constrain each other, codetermining the electrochemical exfoliation. Within an encapsulated structure, the electrochemical exfoliation of the graphite powder electrode proceeds from the outside to the inside. The insights revealed here will provide direction for further development of electrochemical exfoliation of graphite powder to produce graphene.
RESUMO
The aim of this study was to investigate the effect of circSnap47 on heart failure (HF) and its potential mechanisms. Quantitative real-time PCR (qRT-PCR) was performed to detect the mRNA expression levels of circSnap47 and miR-233-3p. The viability and apoptosis of H9C2 cells were assessed using CCK-8 and TUNEL assays. The expressions of interleukin (IL)-6, IL-1ß, IL-18, and tumor necrosis factor-alpha were determined using ELISA and qRT-PCR. In addition, the expression of apoptosis-related proteins and mitogen-activated protein kinase (MAPK) signaling pathway-related proteins was analyzed using western blot. Moreover, HF-related circRNAs and miRNAs were predicted via bioinformatics analysis. The relationship between circSnap47 and miR-233-3p was further confirmed using a dual-luciferase reporter gene assay. In HF tissues and H9C2 cells treated with oxygen-glucose deprivation (OGD), circSnap47 was upregulated. Silencing circSnap47 increased cell viability and inhibited apoptosis. Besides, silencing circSnap47 alleviated OGD-induced inflammation in H9C2 cells. Moreover, we found that miR-233-3p was the downstream target gene of circSnap47. Our results also revealed that silencing circSnap47 relieved OGD-induced H9C2 cell damage by inactivating the miR-223-3p/MAPK axis. We confirmed that circSnap47 silencing inhibited HF progression via regulation of miR-223/MAPK axis, which will provide for a new therapeutic direction for the treatment of HF.