Wearable Optical Fiber Sensors in Medical Monitoring Applications: A Review.

Wearable optical fiber sensors have great potential for development in medical monitoring. With the increasing demand for compactness, comfort, accuracy, and other features in new medical monitoring devices, the development of wearable optical fiber sensors is increasingly meeting these requirements. This paper reviews the latest evolution of wearable optical fiber sensors in the medical field. Three types of wearable optical fiber sensors are analyzed: wearable optical fiber sensors based on Fiber Bragg grating, wearable optical fiber sensors based on light intensity changes, and wearable optical fiber sensors based on Fabry-Perot interferometry. The innovation of wearable optical fiber sensors in respiration and joint monitoring is introduced in detail, and the main principles of three kinds of wearable optical fiber sensors are summarized. In addition, we discuss their advantages, limitations, directions to improve accuracy and the challenges they face. We also look forward to future development prospects, such as the combination of wireless networks which will change how medical services are provided. Wearable optical fiber sensors offer a viable technology for prospective continuous medical surveillance and will change future medical benefits.

Activity Enhancement of Ferrierite in Dimethyl Ether Carbonylation Reactions through Recrystallization with Sodium Oleate.

Methyl acetate (MA) has a wide range of applications as an important industrial chemical. Traditional MOR zeolite for carbonylation of DME to MA accumulated carbon easily because of a 12-membered ring (12 MR) channel. In this work, we innovatively developed the method of recrystallization ferrierite (FER) zeolite using special chelating ligand sodium oleate which can affect ions other than alkali metals. The characterization results of N2 adsorption, transmission electron microscopy (TEM), and Fourier transform infrared spectroscopy (FT-IR) show that hydrothermal recrystallization of ferrierite using sodium oleate resulted in a higher Si/Al ratio, a bigger specific surface area and a larger number of Brønsted acid sites in the eight MR channels, which was more efficient in the reaction of carbonylation of dimethyl ether than ordinary alkali treatment.

The efficacy and feasibility of neoadjuvant immunotherapy plus chemotherapy followed by McKeown minimally invasive oesophagectomy for locally advanced oesophageal squamous cell carcinoma.

Introduction: In immunotherapy, antibodies are activated to block immune checkpoints, resist tumour immunosuppression, shrink tumours and prevent a recurrence. As the science behind tumour immunotherapy continuously develops and improves, neoadjuvant immunotherapy bears more prominent advantages: antigen exposure not only enhances the degree of tumour-specific T-cell response but also prolongs the duration of actions. In this study, we evaluated the efficacy and safety of McKeown minimally invasive oesophagectomy (McKeown MIO) following neoadjuvant immunotherapy combined with chemotherapy (NICT) in patients with locally advanced oesophageal cancer (OC). Patients and Methods: In this retrospective study, 94 patients underwent either NICT or neoadjuvant chemotherapy (NCT) followed by MIO at our institution from January 2020 to October 2022. We assessed the therapy-related adverse events and perioperative outcomes and compared them between the two groups. Results: After completing at least two cycles of neoadjuvant therapy, all patients underwent McKeown MIO with negative margins within 4-7 weeks. Demographic data of the two cohorts were similar. Regarding perioperative characteristics, the median intraoperative blood loss was 50 ml in the NICT group, lower than that of the NCT group (100 ml, P < 0.05). In addition, the NICT group had significantly more harvested lymph nodes than the NCT group (P < 0.05). No significant differences were found in post-operative complications. The rate of objective response rate in the NICT group was higher than that in the NCT group (88.3% vs. 58.8%). Regarding tumour regression, the number of patients with TRG Grades 1-3 in the NICT group was more than that in the NCT. Adverse events experienced by the two groups included anaemia and elevated transaminase. We found no difference in the adverse events between the two groups. Conclusions: This study showed the efficacy and feasibility of NICT followed by McKeown MIO in treating locally advanced OC.

Low-silica Cu-CHA Zeolite Enriched with Al Pairs Transcribed from Silicoaluminophosphate Seed: Synthesis and Ammonia Selective Catalytic Reduction Performance.

Cu-exchanged low-silica CHA zeolites (Si/Al≤4) synthesized without organic templates are promising candidate catalysts for ammonia selective catalytic reduction of nitrogen oxides (NH3 -SCR), but their practical application is restricted due to the low hydrothermal stability. Here, inspired by the transcription from duplex DNA to RNA, we synthesized Al pairs enriched low-silica CHA zeolite (CHA-SPAEI, Si/Al=3.7) by using silicoaluminophosphate (SAPO) featured by strict alternation of -Al-O-P(Si)-O-Al-O- tetrahedra as seed. The proportion of Al pairs in CHA-SPAEI is 78 %, which is much higher than that in the conventional low-silica CHA (CHA-LS, 52 %). After hydrothermal ageing at 800 °C for 6 h, Cu-exchanged CHA-SPAEI shows NO conversion above 90 % within 225-500 °C under a gas hourly space velocity of 200,000 h-1 , which is much better than that of Cu-exchanged CHA-LS. The spatial close proximity of Al pairs in CHA-SPAEI is confirmed by the 27 Al double-quantum single-quantum two-dimensional NMR analyses. The strict -P(Si)-O-Al-O-P(Si)-O- sequence in the fragments from the dissolution of SAPO seed promotes the Al pairs with the -Al-O-Si-O-Al-O- sequence via a transcription process. The utilization of aluminophosphate-based zeolites as seeds opens up a new avenue for the regulation of the Al distribution in zeolites.

Microscale gratings patterned in perovskite films to promote the electron-optical conversion efficiency of perovskite light-emitting diodes.

In this paper, we investigated an enhancement of luminance in a perovskite light-emitting diode (PeLED) by inserting periodic microscale gratings. Soft imprinting was employed to pattern the gratings onto the surface of perovskite film in the annealing process. It was found that the grain-refining effect deeply influenced the morphology and crystallinity of the perovskite film. The finite-element analysis was utilized to confirm the light extraction enhancement arising from the inserted microscale gratings. Additionally, the introduction of microscale gratings led to a 1.33 enhancement of the device's optoelectrical field intensity. Thus, the patterned PeLED obtained an enhancement of 2.96 and 2.1 of the luminance and external quantum efficiency, respectively.

Recent advances in real-time spectrum measurement of soliton dynamics by dispersive Fourier transformation.

Mode-locking lasers have not only produced huge economic benefits in industrial fields and scientific research, but also provided an excellent platform to study diverse soliton phenomena. However, the real-time characterization of the ultrafast soliton dynamics remains challenging for traditional electronic instruments due to their relatively low response bandwidth and slow scan rate. Consequently, it is urgent for researchers to directly observe these ultrafast evolution processes, rather than just indirectly understand them from numerical simulations or averaged measurement data. Fortunately, dispersive Fourier transformation (DFT) provides a powerful real-time measurement technique to overcome the speed limitations of traditional electronic measurement devices by mapping the frequency spectrum onto the temporal waveform. In this review, the operation principle of DFT is discussed and the recent progress in characterizing the ultrafast transient soliton dynamics of mode-locking lasers is summarized, including soliton explosions, soliton molecules, noise-like pulses, rogue waves, and mode-locking buildup processes.

Synthesis and Post-Synthesis Transformation of Germanosilicate Zeolites.

Zeolites are one of the most important heterogeneous catalysts, with a high number of large-scale industrial applications. While the synthesis of new zeolites remain rather limited, introduction of germanium has substantially increased our ability to not only direct the synthesis of zeolites but also to convert them into new materials post-synthetically. The smaller Ge-O-Ge angles (vs. Si-O-Si) and lability of the Ge-O bonds in aqueous solutions account for this behaviour. This Minireview discusses critical aspects of germanosilicate synthesis and their post-synthesis transformations to porous materials.

A Layered Cationic Aluminum Oxyhydroxide as a Highly Efficient and Selective Trap for Heavy Metal Oxyanions.

Cationic framework materials, especially pure inorganic cationic frameworks that can efficiently and selectively capture harmful heavy metal oxyanions from aqueous solution are highly desired yet scarcely reported. Herein, we report the discovery of a 2D cationic aluminum oxyhydroxide, JU-111, which sets a new benchmark for heavy metal oxyanion sorbents, especially for CrVI . Its structure was solved based on 3D electron diffraction tomography data. JU-111 shows fast sorption kinetics (ca. 20 min), high capture capacity (105.4 mg g-1 ), and broad working pH range (3-10) toward CrVI oxyanions. Unlike layered double hydroxides (LDHs), which are poorly selective in the presence of CO3 2- , JU-111 retains excellent selectivity for CrVI even under a large excess of CO3 2- . These superior features coupled with the ultra-low cost and environmentally benign nature make JU-111 a promising candidate for toxic metal oxyanion remediation as well as other potential applications.

Enhanced Photodetection Properties of Tellurium@Selenium Roll-to-Roll Nanotube Heterojunctions.

Non-layered tellurium (Te) is a promising material for applications in transistor and optoelectronic devices for its advantages in excellent intrinsic electronic and optoelectronic properties. However, the poor photodetection performance and relatively uncertain stability of tellurene under ambient conditions greatly limit the practical applications. In order to improve the performance of tellurene-based materials, Te@Se roll-to-roll nanotubes with different selenium (Se) contents synthesized by epitaxial growth of Se on Te nanotubes are, for the first time, employed to fabricate working electrodes for photoelectrochemical (PEC)-type broadband photodetection. They exhibit not only a preferably enhanced capacity for self-powered broadband photodetection but also significantly improved photocurrent density and stability in various aqueous environments (HCl, NaCl, and KOH solutions), compared to tellurene-based photodetectors. It is anticipated that the present work can open up new possibilities for high-performance tellurene-based optoelectronic devices.

All-normal dispersion fiber lasers with magneto-optical polarization controllers.

An all-normal dispersion fiber laser mode-locked by nonlinear polarization evolution is presented in this paper. A magneto-optical polarization controller is employed in a fiber laser to optimize the polarization state and mode-locking operation. In order to provide an adjustable and large enough magnetic field for magneto-optical crystals, a magnetic yoke is designed with silicon steel and copper coil. The Q-switched and continuous-wave mode-locking regime of the fiber laser are investigated experimentally. At a pumping power of 2.08 W, the laser can generate stable mode-locking pulses with an average power of 213 mW. The repetition rate and the pulse duration are 63.7 MHz and 6.2 ps, respectively, corresponding to a pulse energy of 3.34 nJ and a peak power of 539 W. The laser can operate continuously in mode-locking states over five hours with almost no variation in pulse profile, optical spectrum, and output power.

Cross-splicing method for compensating fiber birefringence in polarization-maintaining fiber ring laser mode locked by nonlinear polarization evolution.

We propose a cross-splicing method, for the first time to our knowledge, to compensate the effect of fiber birefringence in a polarization-maintaining fiber ring laser mode locked by nonlinear polarization evolution. This method has been investigated numerically and experimentally. The results indicate that stable mode-locking pulses can be obtained in the cavity with this method; otherwise, no mode-locking states are achieved. The design processes of the laser cavity are presented. Pulses with single pulse energy of 2.1 nJ are generated at pump power of 460 mW. The spectral bandwidth and pulse duration are 17.5 nm and 11.7 ps, respectively. The tunability of the laser is also studied. The central wavelength can be tuned from 1023.2 to 1045.9 nm.

Optimization of a Ge2Sb2Te5-Based Electrically Tunable Phase-Change Thermal Emitter for Dynamic Thermal Camouflage.

Controlling infrared thermal radiations can significantly improve the environmental adaptability of targets and has attracted increasing attention in the field of thermal camouflage. Thermal emitters based on Ge2Sb2Te5 (GST) can flexibly change their radiation energy by controlling the reversible phase transition of GST, which possesses fast switching speed and low power consumption. However, the feasibility of the dynamic regulation of GST emitters lacks experimental and simulation verification. In this paper, we propose an electrically tunable thermal emitter consisting of a metal-insulator-metal plasmonic metasurface based on GST. Both optical and thermal simulations are conducted to optimize the structural parameters of the GST emitter. The results indicate that this emitter possesses large emissivity tunability, wide incident angle, polarization insensitivity, phase-transition feasibility, and dynamic thermal camouflage capability. Therefore, this work proposes a reliable optimization method to design viable GST-based thermal emitters. Moreover, it provides theoretical support for the practical application of phase-change materials in dynamic infrared thermal camouflage technology.

Determination of aflatoxin B1 by novel nanofiber-packed solid-phase extraction coupled with a high performance liquid chromatography-fluorescence detector.

A novel analytical proposal based on nanofiber-packed solid-phase extraction coupled with high performance liquid chromatography-fluorescence detector (HPLC-FLD) has been successfully developed for determining aflatoxin B1 (AFB1) in foods. Four types of nanofibers, including polystyrene (PS) nanofibers, polypyrrole (PPY) nanofibers, polystyrene-acrylic resin (PS-AR) nanofibers, and polystyrene-polyvinyl pyrrolidone (PS-PVP) nanofibers, were fabricated by electrospinning and utilized to prepare a home-made extraction device. In this study, the factors of different fibers, namely, fiber dosage, pH of extraction solution, type of salt ion, concentration of salt ion, and volume of the eluent were optimized. Under optimized conditions, the method showed good linearity in the range of 0.1-40 ng mL-1 with a correlation coefficient greater than 0.999 and good inter-day accuracy (90.8-112.7% recovery) and precision (1.8-3.6% intra-day RSDs, 2.6% inter-day RSD), and the limit of detection (LOD) was 0.05 ng mL-1. Due to its cost-effective, time-saving, environmentally friendly, and simple performance, it has the potential to be utilized to determine aflatoxins in complicated matrices.

Programmable Wavefront Control in the Visible Spectrum Using Low-Loss Chalcogenide Phase-Change Metasurfaces.

All-dielectric metasurfaces provide unique solutions for advanced wavefront manipulation of light with complete control of amplitude and phase at sub-wavelength scales. One limitation, however, for most of these devices is the lack of any post-fabrication tunability of their response. To break this limit, a promising approach is employing phase-change materials (PCMs), which provide fast, low energy, and non-volatile means to endow metasurfaces with a switching mechanism. In this regard, great advancements have been done in the mid-infrared and near-infrared spectrum using different chalcogenides. In the visible spectral range, however, very few devices have demonstrated full phase manipulation, high efficiencies, and reversible optical modulation. In this work, a programmable all-dielectric Huygens' metasurface made of antimony sulfide (Sb2 S3 ) PCM is experimentally demonstrated, a low loss and high-index material in the visible spectral range with a large contrast (≈0.5) between its amorphous and crystalline states. ≈2π phase modulation is shown with high associated transmittance and it is used to create programmable beam-steering devices. These novel chalcogenide PCM metasurfaces have the potential to emerge as a platform for next-generation spatial light modulators and to impact application areas such as programmable and adaptive flat optics, light detection and ranging (LiDAR), and many more.

All-Optical Modulation Technology Based on 2D Layered Materials.

In the advancement of photonics technologies, all-optical systems are highly demanded in ultrafast photonics, signal processing, optical sensing and optical communication systems. All-optical devices are the core elements to realize the next generation of photonics integration system and optical interconnection. Thus, the exploration of new optoelectronics materials that exhibit different optical properties is a highlighted research direction. The emerging two-dimensional (2D) materials such as graphene, black phosphorus (BP), transition metal dichalcogenides (TMDs) and MXene have proved great potential in the evolution of photonics technologies. The optical properties of 2D materials comprising the energy bandgap, third-order nonlinearity, nonlinear absorption and thermo-optics coefficient can be tailored for different optical applications. Over the past decade, the explorations of 2D materials in photonics applications have extended to all-optical modulators, all-optical switches, an all-optical wavelength converter, covering the visible, near-infrared and Terahertz wavelength range. Herein, we review different types of 2D materials, their fabrication processes and optical properties. In addition, we also summarize the recent advances of all-optical modulation based on 2D materials. Finally, we conclude on the perspectives on and challenges of the future development of the 2D material-based all-optical devices.

Enhancing the Stability of the Resin-Dentin Bonding Interface with Ag+- and Zn2+-Exchanged Zeolite A.

Enhancing the stability of the resin-dentin bonding interface via simultaneously improving the antibacterial, mechanical, and adhesive properties of a dental adhesive is the key to prolonging the longevity of dental restoration for caries treatment. Herein, we present the stabilization effect of Ag+- and Zn2+-exchanged zeolite A (denoted as Ag-A and Zn-A, respectively) on the resin-dentin bonding interface. Ag-A and Zn-A zeolites exhibited sustained ion release capability, outstanding biocompatibility to L929 cells (<2 mg/mL), and excellent antibacterial ability to Streptococcus mutans (minimum inhibitory concentration: 100 µg/mL for Ag-A and 200 µg/mL for Zn-A). One-step self-etching adhesives modified by Ag-A, Zn-A, or Ag-/Zn-A (1/1 in weight) zeolites with an ultralow loading of 0.2 wt % exhibited favorable antibacterial activity with the inhibition of biofilm formation by 70.33, 56.47, and 62.54%, respectively. Compared to the control group, Zn-A- and Ag-/Zn-A-modified adhesives significantly increased the wettability properties of the adhesive and the long-term resin-dentin bond strength (by ∼25%) after 5000 thermocycles of aging. The current data demonstrated that the introduction of 0.2 wt % Zn-A or Ag-/Zn-A into the adhesive remarkably enhanced the stability of the resin-dentin bonding interface. Our findings provide a new strategy to modify the dental adhesive for further optimizing the longevity of dental restorations for caries.

Two-Dimensional Cationic Aluminoborate as a New Paradigm for Highly Selective and Efficient Cr(VI) Capture from Aqueous Solution.

Water pollutants existing in their oxyanion forms have high solubility and environmental mobility. To capture these anionic pollutants, cost-effective inorganic materials with cationic frameworks and outstanding removal performance are ideal adsorbents. Herein, we report that two-dimensional (2D) cationic aluminoborate BAC(10) sets a new paradigm for highly selective and efficient capture of Cr(VI) and other oxyanions from aqueous solution. The structure of Cr(VI)-exchanged BAC(10) sample (Cr(VI)@BAC(10), H0.22·Al2BO4.3·(HCrO4)0.22·2.64H2O) has been successfully solved by continuous rotation electron diffraction. The crystallographic data show that the 2D cationic layer of BAC(10) is built by AlO6 octahedra, BO4 tetrahedra, and BO3 triangles. Partial chromate ions exchanged with Cl- ions are located within the interlayer region, which are chemically bonded to the aluminoborate layer. BAC(10) shows faster adsorption kinetics compared to the commercial anion exchange resin (AER) and layered double hydroxides (LDHs), a higher maximum adsorption capacity of 139.1 mg/g than that of AER (62.77 mg/g), LDHs (81.43 mg/g), and a vast majority of cationic MOFs, and a much broader working pH range (2-10.5) than LDHs. Moreover, BAC(10) also shows excellent Cr(VI) oxyanion removal performance for a solution with a low concentration (1-10 mg/L), and the residual concentration can be reduced to below 0.05 mg/L of the WHO drinking water criterion. These superior properties indicate that BAC(10) is a promising material for remediation of Cr(VI) and other harmful oxyanions from wastewater.

Low Energy Switching of Phase Change Materials Using a 2D Thermal Boundary Layer.

The switchable optical and electrical properties of phase change materials (PCMs) are finding new applications beyond data storage in reconfigurable photonic devices. However, high power heat pulses are needed to melt-quench the material from crystalline to amorphous. This is especially true in silicon photonics, where the high thermal conductivity of the waveguide material makes heating the PCM energy inefficient. Here, we improve the energy efficiency of the laser-induced phase transitions by inserting a layer of two-dimensional (2D) material, either MoS2 or WS2, between the silica or silicon substrate and the PCM. The 2D material reduces the required laser power by at least 40% during the amorphization (RESET) process, depending on the substrate. Thermal simulations confirm that both MoS2 and WS2 2D layers act as a thermal barrier, which efficiently confines energy within the PCM layer. Remarkably, the thermal insulation effect of the 2D layer is equivalent to a ∼100 nm layer of SiO2. The high thermal boundary resistance induced by the van der Waals (vdW)-bonded layers limits the thermal diffusion through the layer interface. Hence, 2D materials with stable vdW interfaces can be used to improve the thermal efficiency of PCM-tuned Si photonic devices. Furthermore, our waveguide simulations show that the 2D layer does not affect the propagating mode in the Si waveguide; thus, this simple additional thin film produces a substantial energy efficiency improvement without degrading the optical performance of the waveguide. Our findings pave the way for energy-efficient laser-induced structural phase transitions in PCM-based reconfigurable photonic devices.

A novel biosensor based on Blu-ray disc coating film for determination of total amino acid content in tea leaves.

Biosensor substrate materials are a key research focus in the field of sensors. Blu-ray discs (BDs) as universal sensor substrates are advantageous in comparison with other substrates (conventional paper and polycarbonate) in terms of easier activity treatment and higher density of reactive groups on the film surface. In this study, a novel and simple microfluidic biosensor based on BD coating film was developed by treating with sodium hydroxide solution and a piece of filter paper at slightly elevated temperatures. There are no significant physical damages to the substrate morphology, and the aging effect is minimal. The unique wetting, optical, and self-cleaning properties of the modified surfaces can be demonstrated in the paper. We have tested this new type of biosensor substrates for assay applications (the determination of total amino acids in tea leaves), which showed excellent performance in terms of sensitivity and reproducibility. The novel biosensor substrate material based on a simple BD coating film displayed preferable merits with easy making, low cost, easy using, and extensive application prospect.

The inorganic cation-tailored "trapdoor" effect of silicoaluminophosphate zeolite for highly selective CO2 separation.

Functional nanoporous materials are widely explored for CO2 separation, in particular, small-pore aluminosilicate zeolites having a "trapdoor" effect. Such an effect allows the specific adsorbate to push away the sited cations inside the window followed by exclusive admission to the zeolite pores, which is more advantageous for highly selective CO2 separation. Herein, we demonstrated that the protonated organic structure-directing agent in the small-pore silicoaluminophosphate (SAPO) RHO zeolite can be directly exchanged with Na+, K+, or Cs+ and that the Na+ form of SAPO-RHO exhibited unprecedented separation for CO2/CH4, superior to all of the nanoporous materials reported to date. Rietveld refinement revealed that Na+ is sited in the center of the single eight-membered ring (s8r), while K+ and Cs+ are sited in the center of the double 8-rings (d8rs). Theoretical calculations showed that the interaction between Na+ and the s8r in SAPO-RHO was stronger than that in aluminosilicate RHO, giving an enhanced "trapdoor" effect and record high selectivity for CO2 with the separation factor of 2196 for CO2/CH4 (0.02/0.98 bar). The separation factor of Na-SAPO-RHO for CO2/N2 was 196, which was the top level among zeolitic materials. This work opens a new avenue for gas separation by using diverse silicoaluminophosphate zeolites in terms of the cation-tailored "trapdoor" effect.