Mining the Carbon Intermediates in Plastic Waste Upcycling for Constructing C-S Bond.

Postconsumer plastics are generally perceived as valueless with only a small portion of plastic waste being closed-loop recycled into similar products while most of them are discarded in landfills. Depositing plastic waste in landfills not only harms the environment but also signifies a substantial economic loss. Alternatively, constructing value-added chemical feedstocks via mining the waste-derived intermediate species as a carbon (C) source under mild electrochemical conditions is a sustainable strategy to realize the circular economy. This proof-of-concept work provides an attractive "turning trash to treasure" strategy by integrating electrocatalytic polyethylene terephthalate (PET) plastic upcycling with a chemical C-S coupling reaction to synthesize organosulfur compounds, hydroxymethanesulfonate (HMS). HMS can be produced efficiently (Faradaic efficiency, FE of ∼70%) via deliberately capturing electrophilic intermediates generated in the PET monomer (ethylene glycol, EG) upcycling process, followed by coupling them with nucleophilic sulfur (S) species (i.e., SO32- and HSO3-). Unlike many previous studies conducted under alkaline conditions, PET upcycling was performed over an amorphous MnO2 catalyst under near-neutral conditions, allowing for the stabilization of electrophilic intermediates. The compatibility of this strategy was further investigated by employing biomass-derived compounds as substrates. Moreover, comparable HMS yields can be achieved with real-world PET plastics, showing its enormous potential in practical application. Lastly, Density function theory (DFT) calculation reveals that the C-C cleavage step of EG is the rate-determining step (RDS), and amorphous MnO2 significantly decreases the energy barriers for both RDS and C-S coupling when compared to the crystalline counterpart.

Strong Penetration-Induced Effective Photothermal Therapy by Exosome-Mediated Black Phosphorus Quantum Dots.

Nanocancer medicine, such as photothermal therapy (PTT), as a promising way to solve cancer without side effects, faces a huge biological barrier during the circulation of nanoparticles in the body, including nanobiological interactions in the blood, isolation of nanoparticles in the macrophage system, tumor spillover effect, and especially uneven intratumoral distribution of nanoparticles, which cast a shadow over the hope. To address the problem of intratumoral distribution, an effective photothermal agent is introduced by packaging the black phosphorus quantum dots (BPQDs) into exosome vector (EXO) through electroporation method. With the improving and proper stability for better therapy, the resulting BPQDs@EXO nanospheres (BEs) exhibit good biocompatibility, long circulation time, and excellent tumor targeting ability, hence impressive PTT efficiency evidenced by highly efficient tumor ablation in vivo. Importantly, great permeability on organoids contributed by EXO appears with BEs, which strongly promotes the efficient killing ability. These BP-based nanospheres must promise high clinical potential due to the high PTT efficiency and minimal side effects.

Ultrastable Laurionite Spontaneously Encapsulates Reduced-dimensional Lead Halide Perovskites.

Reduced dimensional lead halide perovskites (RDPs) have attracted great research interest in diverse optical and optoelectronic fields. However, their poor stability is one of the most challenging obstacles prohibiting them from practical applications. Here, we reveal that ultrastable laurionite-type Pb(OH)Br can spontaneously encapsulate the RDPs in their formation solution without introducing any additional chemicals, forming RDP@Pb(OH)Br core-shell microparticles. Interestingly, the number of the perovskite layers within the RDPs can be conveniently and precisely controlled by varying the amount of CsBr introduced into the reaction solution. A single RDP@Pb(OH)Br core-shell microparticle composed of RDP nanocrystals with different numbers of perovskite layers can be also prepared, showing different colors under different light excitations. More interestingly, barcoded RDP@Pb(OH)Br microparticles with different parts emitting different lights can also be prepared. The morphology of the emitting microstructures can be conveniently manipulated. The RDP@Pb(OH)Br microparticles demonstrate outstanding environmental, chemical, thermal, and optical stability, as well as strong resistance to anion exchange processes. This study not only deepens our understanding of the reaction processes in the extensively used saturation recrystallization method but also points out that it is highly possible to dramatically improve the performance of the optoelectronic devices through manipulating the spontaneous formation process of Pb(OH)Br.

Force-Induced Turn-On Persistent Room-Temperature Phosphorescence in Purely Organic Luminogen.

Research of purely organic room-temperature phosphorescence (RTP) materials has been a hot topic, especially for those with stimulus response character. Herein, an abnormal stimulus-responsive RTP effect is reported, in which, purely organic luminogen of Czs-ph-3F shows turn-on persistent phosphorescence under grinding. Careful analyses of experimental results, coupled with the theoretical calculations, show that the transition of molecular conformation from quasi-axial to quasi-equatorial of the phenothiazine group should be mainly responsible for this exciting result. Furthermore, the applications of stylus printing and thermal printing are both successfully realized, based on the unique RTP effect of Czs-ph-3F.

Springtail-Inspired Superamphiphobic Ordered Nanohoodoo Arrays with Quasi-Doubly Reentrant Structures.

The skin of springtails is well-known for being able to repel water and organic liquids using their hexagonally arranged protrusions with reentrant structures. Here, a method to prepare 100 nm-sized nanohoodoo arrays with quasi-doubly reentrant structures over square centimeters through combining the nanosphere lithography and the template-protected selective reactive ion etching technique is demonstrated. The top size of the nanohoodoos, the intra-nanohoodoo distance, and the height of the nanohoodoos can be readily controlled by the plasma-etching time of the polystyrene (PS) spheres, the size of the PS spheres used, and the reactive ion etching time of silicon. The strong structural control capability allows for the study of the relationship between the nanohoodoo structure and the wetting property. Superamphiphobic nanohoodoo arrays with outstanding water/organic liquid repellent properties are finally obtained. The superamphiphobic and liquid repellent properties endow the nanohoodoo arrays with remarkable self-cleaning performance even using hot water droplets, anti-fogging performance, and the surface-enhanced Raman scattering sensitivity improvement by enriching the analyte molecules on the nanohoodoo arrays. Overall, the simple and massive production of the superamphiphobic nanohoodoo structures will push their practical application processes in diverse fields where wettability and liquid repellency need to be carefully engineered.

Modulating the filament rupture degree of threshold switching device for self-selective and low-current nonvolatile memory application.

Resistive switching devices have tremendous potential for memory, logic, and neuromorphic computing applications. Cation-based resistive switching devices intrinsically show nonvolatile memory characteristics under high compliance current (I CC), while show volatile threshold switching (TS) selector characteristics under low I CC. However, separate researches about cation-based memory or selector are hard to evade the typical current-retention dilemma, which results in the hardship to obtain low-current memory and high-current selector. Here, we propose a novel strategy to realize nonvolatile storage characteristics in a volatile TS device by modulating the rupture degree of conductive filament (CF). Enlarging the rupture degree of the CF with a certain RESET process, as confirmed by transmission electron microscope and energy dispersive spectrometry results, the threshold voltage of the Ag/HfO2/Pt TS devices can be enlarged from 0.9 to 2.8 V. Generation of the voltage difference enables the volatile TS devices the ability of self-selective nonvolatile storage. Increasing the RESET magnitude and shrinking the device size have been proved effective ways to increase the read window of the TS memory (TSM) devices. Evading the limit of the current-retention dilemma, ultra-low energy dissipation can be obtained by decreasing I CC to nA level. With self-selective, low-energy, and potential high-density integration characteristics, the proposed TSM device can act as a potential supplement of novel storage class memories.

Fully Tensile Strained Pd3Pb/Pd Tetragonal Nanosheets Enhance Oxygen Reduction Catalysis.

While surface strain engineering in shaped and bimetallic nanostructures offers additional variables for manoeuvring the catalysis, manipulating isotropic strain distributions in nanostructures remains a great challenge to reach higher tiers of the catalyst's design. Herein, we report an efficient approach to construct a unique class of core/shell palladium-lead (Pd-Pb)/Pd nanosheets (NSs) and nanocubes (NCs) with homogeneous tensile strain along [001] on both the top-Pd and edge-Pd surfaces for boosting oxygen reduction reaction (ORR). These core/shell Pd-Pb/Pd NSs and Pd-Pb/Pd NCs exhibit over 160% and 140% increases in mass activity and over 114% and 98% increases in specific activity when compared with these unshelled counterparts, respectively. Especially, the Pd3Pb/Pd NSs show the ORR mass and specific activities of 0.57 A/mgPd and 1.31 mA/cm2 at 0.90 V versus reversible hydrogen electrode, which are 8.8 (6.5) and 9.4 (9.8) times higher than those of the commercial Pd/C (Pt/C), respectively. The valence band photoemission spectra and first-principles calculations collectively show that the tensile strained Pd shell results in an upshift of the d-band-center of Pd, weakening the chemisorption of oxygenated species due to the contribution of the antibonding orbital. In addition, the Pd3Pb/Pd NSs and NCs with intermetallic core and homogeneous few layers of Pd shell can sustain at least 20 000 potential cycles with negligible activity decay and composition changes. The present work provides a new direction for the design of highly active and stable catalysts for fuel cells and beyond.

Active Electron Density Modulation of Co3 O4 -Based Catalysts Enhances their Oxygen Evolution Performance.

Despite the fact that many strategies have been developed to improve the efficiency of the oxygen evolution reaction (OER), the precise modulation of the surface electronic properties of catalysts to improve their catalytic activity is still challenging. Herein, we demonstrate that the surface active electron density of Co3 O4 can be effectively regulated by an argon-ion irradiation method. X-ray photoelectron and synchrotron x-ray absorption spectroscopy, UV photoelectron spectrometry, and DFT calculations show that the surface active electron density band center of Co3 O4 has been upshifted, leading to a significantly enhanced absorption capability of the oxo group. The optimized Co3 O4 -based catalysts exhibit an excellent overpotential of 260 mV at 10 mA cm-2 and Tafel slope of 54 mV dec-1 , superior to the capability of the benchmark RuO2 , representing one of the best Co-based OER catalysts. This approach could guide the future rational design and discovery of ideal electrocatalysts.

Surface-Regulated Rhodium-Antimony Nanorods for Nitrogen Fixation.

Surface regulation is an effective strategy to improve the performance of catalysts, but it has been rarely demonstrated for nitrogen reduction reaction (NRR) to date. Now, surface-rough Rh2 Sb nanorod (RNR) and surface-smooth Rh2 Sb NR (SNR) were selectively created, and their performance for NRR was investigated. The high-index-facet bounded Rh2 Sb RNRs/C exhibit a high NH3 yield rate of 228.85±12.96 µg h-1 mg-1 Rh at -0.45 V versus reversible hydrogen electrode (RHE), outperforming the Rh2 Sb SNRs/C (63.07±4.45 µg h-1 mg-1 Rh ) and Rh nanoparticles/C (22.82±1.49 µg h-1 mg-1 Rh ), owing to the enhanced adsorption and activation of N2 on high-index facets. Rh2 Sb RNRs/C also show durable stability with negligible activity decay after 10 h of successive electrolysis. The present work demonstrates that surface regulation plays an important role in promoting NRR activity and provides a new strategy for creating efficient NRR electrocatalysts.

Size-Dependent Nickel-Based Electrocatalysts for Selective CO2 Reduction.

Closing the anthropogenic carbon cycle by converting CO2 into reusable chemicals is an attractive solution to mitigate rising concentrations of CO2 in the atmosphere. Herein, we prepared Ni metal catalysts ranging in size from single atoms to over 100 nm and distributed them across N-doped carbon substrates which were obtained from converted zeolitic imidazolate frameworks (ZIF). The results show variance in CO2 reduction performance with variance in Ni metal size. Ni single atoms demonstrate a superior Faradaic efficiency (FE) for CO selectivity (ca. 97 % at -0.8 V vs. RHE), while results for 4.1 nm Ni nanoparticles are slightly lower (ca. 93 %). Further increase the Ni particle size to 37.2 nm allows the H2 evolution reaction (HER) to compete with the CO2 reduction reaction (CO2 RR). The FE towards CO production decreases to under 30 % and HER efficiency increase to over 70 %. These results show a size-dependent CO2 reduction for various sizes of Ni metal catalysts.

Volume-Enhanced Raman Scattering Detection of Viruses.

Virus detection and analysis are of critical importance in biological fields and medicine. Surface-enhanced Raman scattering (SERS) has shown great promise in small molecule and even single molecule detection, and can provide fingerprint signals of molecules. Despite the powerful detection capabilities of SERS, the size discrepancy between the SERS "hot spots" (generally, <10 nm) and viruses (usually, sub-100 nm) yields poor detection reliability of viruses. Inspired by the concept of molecular imprinting, a volume-enhanced Raman scattering (VERS) substrate composed of hollow nanocones at the bottom of microbowls (HNCMB) is developed. The hollow nanocones of the resulting VERS substrates serve a twofold purpose: 1) extending the region of Raman signal enhancement from the nanocone surface (e.g., surface "hot spots") to the hollow area within the cone (e.g., volume "hot spots")-a novel method of Raman signal enhancement, and 2) directing analyte such as viruses of a wide range of sizes to those VERS "hot spots" while simultaneously increasing the surface area contributing to SERS. Using HNCMB VERS substrates, greatly improved Raman signals of single viruses are demonstrated, an achievement with important implications in disease diagnostics and monitoring, biomedical fields, as well as in clinical treatment.

A Review of Recent Applications of Ion Beam Techniques on Nanomaterial Surface Modification: Design of Nanostructures and Energy Harvesting.

Nanomaterials have gained plenty of research interest because of their excellent performance, which is derived from their small size and special structure. In practical applications, to acquire nanomaterials with high performance, many methods have been used to modulate the structure and components of materials. To date, ion beam techniques have extensively been applied for modulating the performance of various nanomaterials. Energetic ion beams can modulate the surface morphology and chemical components of nanomaterials. In addition, ion beam techniques have also been used to fabricate nanomaterials, including 2D materials, nanoparticles, and nanowires. Compared with conventional methods, ion beam techniques, including ion implantation, ion irradiation, and focused ion beam, are all pure physical processes; these processes do not introduce any impurities into the target materials. In addition, ion beam techniques exhibit high controllability and repeatability. Here, recent progress in ion beam techniques for nanomaterial surface modification is systematically summarized and existing challenges and potential solutions are presented.

Small Al cluster ion implantation into Si and 4H-SiC.

RATIONALE: Continuously downscaling integrated circuit devices requires fabrication of shallower p-n junctions. The ion implantation approach at low energy is subject to low beam current due to the Coulomb repulsion. To overcome this problem cluster ions can be used for implantation. In comparison with single ions, cluster ions possess lower energy per atom and reduced Coulomb repulsion resulting in high equivalent current. METHODS: In this study to carry out low-energy implantation into single crystalline silicon and 4H-SiC samples we employ Aln - (n = 1-5) clusters with energy in the range of 5-20 keV. The Al clusters are obtained by Cs sputtering of Al rod. Time-of-flight secondary ion mass spectrometry (TOF-SIMS; IONTOF TOF.SIMS-5) is used to study aluminum and oxygen sputter depth profiles for different cluster sizes and implantation energies before and after annealing treatment. RESULTS: A distinguishable effect of the energy per atom in the cluster on reduction of the projected range Rp is revealed. The lowest Rp of 3 ± 1 nm has been achieved in SiC samples at the energy per atom of 1.66 keV. After annealing of Si samples, a considerable change in the Al profiles due to redistribution of Al atoms during motion of the front of recrystallization is observed. The influence of the number of atoms in the cluster at the same energy per atom within the experimental uncertainty is not observed. CONCLUSIONS: The transient effects of the sputtering by the primary ion beam distort the shape of the Al profiles in Si samples. In the case of SiC, due to its relatively lower surface chemical activity, more informative TOF-SIMS depth profiling of the shallow cluster implantation is feasible.

Anionic Dopant Delocalization through p-Band Modulation to Endow Metal Oxides with Enhanced Visible-Light Photoactivity.

An N-doped TiO2 model reveals a conceptually different mechanism for activating the N dopant based on delocalized orbital hybridization through O vacancy incorporation. Synchrotron-based X-ray absorption spectroscopy, time-resolved fluorescence, and DFT studies revealed that O vacancy incorporation can effectively stimulate the delocalization of N impurity states through p-band orbital modulation, which leads to a significant enhancement in photocarrier lifetime. Consequently, this effect also results in a remarkable increase in the incident photon-to-electron conversion efficiency in the range of 400-550 nm compared to that of conventional N-incorporated TiO2 (15 % versus 1 % at 450 nm). This work reveals the fundamental necessity of orbital modulation in the band engineering of metal oxides for driving solar water splitting and beyond.

Significantly enhanced visible light response in single TiO2 nanowire by nitrogen ion implantation.

The metal-oxide semiconductor TiO2 shows enormous potential in the field of photoelectric detection; however, UV-light absorption only restricts its widespread application. It is considered that nitrogen doping can improve the visible light absorption of TiO2, but the effect of traditional chemical doping is far from being used for visible light detection. Herein, we dramatically broadened the absorption spectrum of the TiO2 nanowire (NW) by nitrogen ion implantation and apply the N-doped single TiO2 NW to visible light detection for the first time. Moreover, this novel strategy effectively modifies the surface states and thus regulates the height of Schottky barriers at the metal/semiconductor interface, which is crucial to realizing high responsivity and a fast response rate. Under the illumination of a laser with a wavelength of 457 nm, our fabricated photodetector exhibits favorable responsivity (8 A W-1) and a short response time (0.5 s). These results indicate that ion implantation is a promising method in exploring the visible light detection of TiO2.

Confining Cation Injection to Enhance CBRAM Performance by Nanopore Graphene Layer.

Conductive-bridge random access memory (CBRAM) is considered a strong contender of the next-generation nonvolatile memory technology. Resistive switching (RS) behavior in CBRAM is decided by the formation/dissolution of nanoscale conductive filament (CF) inside RS layer based on the cation injection from active electrode and their electrochemical reactions. Remarkably, RS is actually a localized behavior, however, cation injects from the whole area of active electrode into RS layer supplying excessive cation beyond the requirement of CF formation, leading to deterioration of device uniformity and reliability. Here, an effective method is proposed to localize cation injection into RS layer through the nanohole of inserted ion barrier between active electrode and RS layer. Taking an impermeable monolayer graphene as ion barrier, conductive atomic force microscopy results directly confirm that CF formation is confined through the nanohole of graphene due to the localized cation injection. Compared with the typical Cu/HfO2 /Pt CBRAM device, the novel Cu/nanohole-graphene/HfO2 /Pt device shows improvement of uniformity, endurance, and retention characteristics, because the cation injection is limited by the nanohole graphene. Scaling the nanohole of ion barrier down to several nanometers, the single-CF-based CBRAM device with high performance is expected to achieve by confining the cation injection at the atomic scale.

Significantly Enhanced Visible Light Photoelectrochemical Activity in TiO2 Nanowire Arrays by Nitrogen Implantation.

Titanium oxide (TiO2) represents one of most widely studied materials for photoelectrochemical (PEC) water splitting but is severely limited by its poor efficiency in the visible light range. Here, we report a significant enhancement of visible light photoactivity in nitrogen-implanted TiO2 (N-TiO2) nanowire arrays. Our systematic studies show that a post-implantation thermal annealing treatment can selectively enrich the substitutional nitrogen dopants, which is essential for activating the nitrogen implanted TiO2 to achieve greatly enhanced visible light photoactivity. An incident photon to electron conversion efficiency (IPCE) of ∼10% is achieved at 450 nm in N-TiO2 without any other cocatalyst, far exceeding that in pristine TiO2 nanowires (∼0.2%). The integration of oxygen evolution reaction (OER) cocatalyst with N-TiO2 can further increase the IPCE at 450 nm to ∼17% and deliver an unprecedented overall photocurrent density of 1.9 mA/cm(2), by integrating the IPCE spectrum with standard AM 1.5G solar spectrum. Systematic photoelectrochemical and electrochemical studies demonstrated that the enhanced PEC performance can be attributed to the significantly improved visible light absorption and more efficient charge separation. Our studies demonstrate the implantation approach can be used to reliably dope TiO2 to achieve the best performed N-TiO2 photoelectrodes to date and may be extended to fundamentally modify other semiconductor materials for PEC water splitting.

Integration of High-k Oxide on MoS2 by Using Ozone Pretreatment for High-Performance MoS2 Top-Gated Transistor with Thickness-Dependent Carrier Scattering Investigation.

A top-gated MoS2 transistor with 6 nm thick HfO2 is fabricated using an ozone pretreatment. The influence to the top-gated mobility brought about by the deposition of HfO2 is studied statistically, for the first time. The top-gated mobility is suppressed by the deposition of HfO2 , and multilayered samples are less susceptible than monolayer ones.

Floating gate memory-based monolayer MoS2 transistor with metal nanocrystals embedded in the gate dielectrics.

Charge trapping layers are formed from different metallic nanocrystals in MoS2 -based nanocrystal floating gate memory cells in a process compatible with existing fabrication technologies. The memory cells with Au nanocrystals exhibit impressive performance with a large memory window of 10 V, a high program/erase ratio of approximately 10(5) and a long retention time of 10 years.

Monolayer graphene on nanostructured Ag for enhancement of surface-enhanced Raman scattering stable platform.

We have reported that the Ag nanostructure-based substrate is particularly suitable for surface-enhanced Raman scattering when it is coated with monolayer graphene, an optically transparent and chemistry-inertness material in the visible range. Ag bowtie nanoantenna arrays and Ag nanogrids were fabricated using plasma-assisted nanosphere lithography. Our measurements show that atmospheric sulfur containing compounds are powerless to break in the monolayer graphene to vulcanize the surfaces of the Ag bowtie nanoantenna arrays and Ag nanogrids by various means, including scanning electron microscopy (SEM) and x-ray photoelectron spectroscopy (XPS). Furthermore, the Ag nanostructure substrate coated with the monolayer graphene film shows a larger enhancement of Raman activity and the electromagnetic field than the uncoated substrate. Compared with those of bare Ag nanostructures, the averaged EFs of graphene-film-coated Ag nanostructures were estimated to be about 21 and 5 for Ag bowtie nanoantenna arrays and nanogrids after one month later in air, respectively. These observations are further supported by theoretical calculations.